All finds recorded in the Parliamentary constituency of Aylesbury

  • Thumbnail image of BH-527A31

Record ID: BH-527A31
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A plated forgery of a denarius of Septimius Severus (AD 193-211); LAETITIA reverse*. Dimensions: 17.5mm in diameter, 1.9mm thick; weight: 1.8g.
Created on: Thursday 17th November 2011
Last updated: Saturday 3rd December 2011
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BUC-4FD416

Record ID: BUC-4FD416
Object type: COIN
Broad period: IRON AGE
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A potin (Cast bronze). Tribe: Cantii. British South Eastern. British Museum Catalogue type: 711-713. Van Arsdell Type (VA): 106.01. Ancient British Coins (ABC): 150. Obverse description: Outline head left. Reverse description: Outline bull left just visible.
Created on: Thursday 17th November 2011
Last updated: Wednesday 28th May 2014
Spatial data recorded. This findspot is known as 'Wendover', grid reference and parish protected.


  • Thumbnail image of BUC-4FC214

Record ID: BUC-4FC214
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Post medieval cast copper alloy dress hook. The tag is flat backed and has a moulded front. The central plate has a central moulded thistle head or pinecone contained on the hook side by a raised V shape. This raised V is flanked by scrolled decoration on the edge. The scrolled decoration continues around the loop end of the plate where it becomes a group of openwork circles. At one edge of the plate is a rectangular attachment loop. At the opposite edge of the plate a single hook projects from the centre of the fastening. The sharp point of the hook is bent back 180 degrees. Read …
Created on: Thursday 17th November 2011
Last updated: Wednesday 12th March 2014
Spatial data recorded. This findspot is known as 'Wendover', grid reference and parish protected.


  • Thumbnail image of BH-3AB907

Record ID: BH-3AB907
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy frame from a Medieval single-loop buckle. The frame is roughly 'D-shaped' and has a pointed pin rest with horizontal groove. The sides are of rectangular section and the pin is missing. Dimensions: 12.5mm long, 16.1mm wide, 2.2mm thick; weight: 0.7g.
Created on: Wednesday 16th November 2011
Last updated: Tuesday 3rd January 2012
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-3AA717

Record ID: BH-3AA717
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy hooked tag. The head comprises a circular plate, the upper surface of which is decorated with a cast flowerhead or sunburst design. At the top are remnants of two perforated lugs, by which the tag would have been fixed. A small projection at the base of the head represents part of the hook. The corroded object measures 15.6mm long, 11.4mm wide, 0.8mm thick and weighs 0.6g. The closest parallels for this artefact are Brian Read's Class E, for which he suggests a date of c. 9th to early 12th century (2008: 30-33). An early post-Medieval date cannot, howeve…
Created on: Wednesday 16th November 2011
Last updated: Tuesday 3rd January 2012
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-3A8402

Record ID: BH-3A8402
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead artefact, possibly representing part of a weight, or, less likely, a seal matrix. The piece comprises a roughly semicircular disc, the 'V-shaped' bottom side giving the impression of having been cut by two blows from a sharp-bladed implement, such as a chisel. The upper surface bears the remains of a relief-moulded flowerhead design, the four surviving petals radiating outwards from a central point, the spaces between them filled with curved ridges. An attached piece of lead at the centre may represent the remnants of a handle. The underside has no discernable tra…
Created on: Wednesday 16th November 2011
Last updated: Tuesday 3rd January 2012
Spatial data recorded. This findspot is known as 'Longwick cum Ilmer', grid reference and parish protected.


  • Thumbnail image of PUBLIC-40DE63

Record ID: PUBLIC-40DE63
Object type: HARNESS FITTING
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy harness decoration circa 17th - 18th century. Plain oval central piece with scallop shell patterned ends. The reverse is flat and plain and has two integral, pointed attachment lugs. Overall length 23.4 mm and a width of 8.4 mm.
Created on: Friday 4th November 2011
Last updated: Tuesday 20th December 2011
Spatial data recorded.


  • Thumbnail image of BUC-180952

Record ID: BUC-180952
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Post medieval cast trapezoidal double-looped buckle frame. The loops widen away form the strap bar and are symmetrical apart from their different outer sides. One has a cusped outer edge shaped into four rounded knops, two wider flanking two smaller, with very large projections from the corners. These projections curve away form the frame before ending in large circular terminals. The other loop has large rounded knops in the corners and the outer side is expanded in the centre into a triangle with an indent at the point creating a double point. The strap bar is narrowed. The edges ar…
Created on: Wednesday 2nd November 2011
Last updated: Thursday 20th March 2014
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of BUC-17DB23

Record ID: BUC-17DB23
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval cast copper alloy rectangular single looped buckle. The pin is missing. The outer edge is widened and tapers in thickness to the slightly pointed outer side. There are three incised transverse grooves on the front of the outer edge in the centre, a slightly wider central one which the pin would have rested flanked by two slightly narrower ones. There is a recessed strap bar and small transverse ridges on the outer faces of the upper and lower sides near the end opposite the strap bar. Griffiths et. al. (2007, pg 99, no. 710) illustrates a similar buckle which they date to …
Created on: Wednesday 2nd November 2011
Last updated: Thursday 27th February 2014
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of BUC-026721

Record ID: BUC-026721
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy early-medieval hooked tag with sub-triangular (shield-shaped with rounded corners) plate and truncated integral recurving hook at the base of the plate, broken before at the start of the return (B2.a.ii* (lobed?)). The top of the plate is cusped with rounded lobes at each corner, and a low raised triangle between formed by cut-outs. The is a crude perforation for attachment in each of the lobes. The front of the plate is decorated in its entirety with engraved concentric circles around a central punched dot (which has pierced the surface of the plate). Around the dot t…
Created on: Tuesday 1st November 2011
Last updated: Saturday 22nd February 2014
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of BUC-025A68

Record ID: BUC-025A68
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A sheet copper-alloy early-medieval hooked tag with triangular plate and integral recurving hook at the base of the plate (B1.b.ii). The top of the plate is straight with two perforations for attachment at the centre, slightly misaligned. The front of the plate is decorated with two rows of punched rectangles along each side. The artefact has corroded to a variable mid-grey colour.
Created on: Tuesday 1st November 2011
Last updated: Saturday 22nd February 2014
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of BUC-022547

Record ID: BUC-022547
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy double loop asymmetrical buckle frame with copper wire pin. The frame has one oval and one rectangular loop. There are incised transverse pin rests across the cnetre of ther outer edge of each loop. There are indents in the upper and lower edges at the ends of the strap bar, emphasising the different loops. The recessed strap bar has broken in the centre. The pin comes to a sharp point at the end and has a different, redder, shade of corrosion, possibly reflecting a different, higher copper, corrosion. Similar buckles can be seen in Whitehead (2003:90-91)…
Created on: Tuesday 1st November 2011
Last updated: Wednesday 26th February 2014
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of BUC-0214F1

Record ID: BUC-0214F1
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy early-medieval hooked tag with sub-triangular (shield-shaped with rounded corners) plate, but having lost its integral recurving hook at the base of the plate as a result of old damage (B2.c.iii). The top of the plate is broadly straight, though it is rounded at the corners. It has two perforations for attachment either side of the centre of the plate, uppermost. The front of the plate is decorated around the edge with incised zigzag lines, and also across the plate in a cross shape. The artefact has a variable mid-green patina over a red-brown metal.
Created on: Tuesday 1st November 2011
Last updated: Saturday 22nd February 2014
Spatial data recorded. This findspot is known as 'Stone', grid reference and parish protected.


  • Thumbnail image of HAMP-E836F5

Record ID: HAMP-E836F5
Object type: COIN
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn, slightly bent 16th-century silver post-medieval threepence of Elizabeth I, second issue, London mint, dated 1567 AD (North 1998)
Created on: Monday 31st October 2011
Last updated: Tuesday 1st November 2011
Spatial data recorded.


  • Thumbnail image of BH-C23A16

Record ID: BH-C23A16
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A hooked tag of early post-Medieval (16th century) date. The head of the artefact has been cast in lead or lead alloy. It is lozenge-shaped in plan, the upper surface stepping upwards, towards the centre, where there are five moulded pellets. The central field is recessed and each of the surrounding 'steps' is of ropework form. The copper-alloy rearward hook, which retains a sharp point, is contained with a cylindrical moulding at the base of the head. On the flat reverse of the head there is a rectangular hanger. The heavily corroded artefact measures 31.6mm high, up to 20.3mm wide…
Created on: Saturday 29th October 2011
Last updated: Saturday 29th October 2011
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-C1DF95

Record ID: BH-C1DF95
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy strap fitting of probable post-Medieval date. The head of the artefact is of octagonal section, has a flat underside and tapers upwards, where it terminates in a flat top. An oval-sectioned arm extends vertically downwards from the underside of the head, before widening into a closed, roughly circular loop. The artefact measures 28mm high, up to 12.4mm wide, 5.9mm thick (head) and weighs 4.3g. The recorder has observed a similar fitting used to suspend a bridle bit on a 16th century display in the Fitzwilliam Musuem, Cambridge. Such fittings may, however, have serve…
Created on: Saturday 29th October 2011
Last updated: Saturday 29th October 2011
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-C162C2

Record ID: BH-C162C2
Object type: COIN
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver farthing, probably of Edward III (1327-1377). This coin is probably from the 1st or 2nd coinage (1327-1343). Dimensions: 11.1mm diameter, 0.1mm thick. Weight: 0.2g.
Created on: Saturday 29th October 2011
Last updated: Saturday 29th October 2011
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-C0F194

Record ID: BH-C0F194
Object type: BROOCH
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy piece from a Roman (early to mid 1st century) Rosette/Thistle type brooch. At the top, part of the horizontal spring encasement remains, the spring and pin having been lost. At the back, this tapers into the parallel-sided, triangular-sectioned bow. The base of this bow is joined to a separate, sub-circular plate. The foot of the brooch is missing. The remaining piece measures 21.9mm long, up to 13.1mm wide (plate), 9.4mm deep and weighs 3.5g.
Created on: Saturday 29th October 2011
Last updated: Saturday 29th October 2011
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-C0B3E2

Record ID: BH-C0B3E2
Object type: MOUNT
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy mount with attached iron rivet. The mount is conical, its surfaces flat and undecorated. The underside is concave and there is the corroded remnant of an iron rivet at the centre. Adhering to the remainder of the underside is an unidentified grey material, possibly representing either a fired ceramic or a solder material. The object measures 15.1mm high, up to 18.3mm wide (diameter at base) and weighs 11.3g. The corrosion product and general form of this piece suggest a Roman date.
Created on: Saturday 29th October 2011
Last updated: Saturday 29th October 2011
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.


  • Thumbnail image of BH-C08862

Record ID: BH-C08862
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Published Find published
A copper-alloy radiate of Carausius (AD c. 286-293), probably PAX AVG. Mint unclear. Dimensions: 18.1mm diameter, 2mm thick. Weight: 3.1g.
Created on: Saturday 29th October 2011
Last updated: Sunday 18th December 2011
Spatial data recorded. This findspot is known as 'Bledlow cum Saunderton', grid reference and parish protected.


821 - 840 of 2,745 records.

Other formats: this page is available as xml json kml rss atom representations.