Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type:3969

  • Thumbnail image of SUR-9CAC9D

Record ID: SUR-9CAC9D
Object type: BROOCH
Broad period: ROMAN
County: Surrey
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman cast copper alloy bow brooch of uncertain Colchester derivative type, dating to the 1st century AD. The bow is narrow, with plano convex cross section and a moulded ridge along the spine. The catchplate is deep and triangular, with a single triangular aperture.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Thumbnail image of SUSS-9C925E

Record ID: SUSS-9C925E
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A worn Post Medieval silver sixpence of Elizabeth I (1558 - 1603) dating to 1573. Acorn initial mark. Mint of London. Reference: North Volume 2;  No. 1997  Measurements: Diameter: 22.04 mm; thickness: 0.64mm and weight: 1.83 g  The obverse is worn away and the flan is bent.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Image not taken

Record ID: NMS-9C5E31
Object type: FLAKE
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Secodary hard hammer struck flake, of unpatinated dark grey flint, small patch of cortex extant to the distal end. recent, fine damage to the thin edges, an irregular notch to one side, just below the platform is also likely to be damage rather than intentional.  Late Prehistoric, Neolithic to Early Bronze Age, 4,000 to 1,500 BC
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Thumbnail image of WREX-9C5DA8

Record ID: WREX-9C5DA8
Object type: VESSEL
Broad period: MODERN
County: Conwy
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a modern ceramic vessel, possibly a cup or sugar bowl dating post 1894AD. The fragment is a lead glazed redware.  The exterior is decorated with enamelled dots and gilt banding which has been over painted.  The enamel is now lost but may have been either off-white or pale blue originally.  This design is known as Greek Border and was registered in 1894 by Gibson and Sons Limited of Burslem, Staffordshire. Length: 30.1mm; width: 22.8mm; thickness: 3.5mm; weight: 3.99g
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Caerhun', grid reference and parish protected.


  • Image not taken

Record ID: SF-9C4BB6
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval copper-alloy trade token issued by John Capon Groser of Framlingham, Suffolk dating to AD 1656. Ref: Williamson 1967: pg 1080 no 126. 
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Near Woodbridge', grid reference and parish protected.


  • Thumbnail image of WREX-9C4A3D

Record ID: WREX-9C4A3D
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Conwy
Workflow stage: Awaiting validation Find awaiting validation
Incomplete lead spindle whorl, dating from the medieval period (AD1300-1500). The whorl is made up of a central bi-conical body that is decorated on both faces with a series of raised triangles and pellets. The perforation has an internal diameter of 10.8mm. The surface of the whorl is worn with a powdery white patina. Diameter: 28.5mm; thickness: 6.4mm; weight: 22.3g.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Caerhun', grid reference and parish protected.


  • Thumbnail image of WREX-9C3AEA

Record ID: WREX-9C3AEA
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Conwy
Workflow stage: Awaiting validation Find awaiting validation
Unidentified copper alloy decorative strip with rococo style scroll work, dating to c. 1730-1760 AD.   Possibly from an item of furniture, a box, or tankard. The strip is rectangular in plan and section and is decorated on one side only in slightly raised relief, with traces of possible black coating. The reverse is rough but undecorated. Length: 75.1mm; width: 18.0mm; thickness: 2.4mm; weight: 17.74g
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Caerhun', grid reference and parish protected.


  • Thumbnail image of NLM-9C316D

Record ID: NLM-9C316D
Object type: COIN
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Silver coin. Sceat of Eadbhert of Northumbria (737-758), as kindly identified by the finder, small chip at edge. Obverse description: Central cross pattee with central pellet, outer border of pellets. Obverse inscription: .EOTBERERT VF Reverse description: leggy maned monster left with long tail and raised forepaw. Diameter: 12.8mm, Weight: 0.68gms, die axis: 12
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Ryther', grid reference and parish protected.


  • Image not taken

Record ID: SF-9C2B71
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver voided long cross cut halfpenny of Henry III (AD 1216-1272), Class 5a-h, dating to AD 1251-1272. Moneyer: Ion; Mint: Uncertain. 
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Near Woodbridge', grid reference and parish protected.


  • Thumbnail image of WREX-9C1ECC

Record ID: WREX-9C1ECC
Object type: VESSEL
Broad period: MEDIEVAL
County: Conwy
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy leg or foot from a copper alloy vessel probably a skillet or posset of later medieval date (1300 - 1600). The foot is broadly sub-triangular in plan, and oval in cross section.  The upper surface is pitted.  The foot appears to have a thick black coating, possible sooting. Length: 35.6mm; width: 32.4mm; thickness:20.9mm; weight: 62
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Caerhun', grid reference and parish protected.


  • Thumbnail image of WREX-9C0207

Record ID: WREX-9C0207
Object type: VESSEL
Broad period: MEDIEVAL
County: Conwy
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy leg or foot from a copper alloy vessel probably a skillet or posset of later medieval date (1300 - 1600). The foot is broadly sub-rectangular in plan. In cross section the foot as a rib projecting along the full length of the foot. The upper surface is smooth. The foot is grey/green in colour with traces of black coating, possibly sooting. Similar example recorded on the database (see WREX-135573). Length: 49.98mm; width: 52.0mm; thickness: 18.1mm; weight: 132.7g
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Caerhun', grid reference and parish protected.


  • Thumbnail image of NLM-9BF3F7

Record ID: NLM-9BF3F7
Object type: BELL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Lead alloy bell fragment, as kindly identified by the finder. Cast upper hemisphere of a probably spherical rumbler bell with a solid apical stalk with an oval loop at its end; the lower hemisphere is lost below a medial rib. Now flattened. In lead alloy, these might accompany other trinkets cast in imitation of objects of more costly materials. Suggested date: Medieval, 1200-1250 Height: 18.9mm, Width: 16.5mm, Thickness (wall, near rib):1mm, Weight: 2.14gms
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Ryther', grid reference and parish protected.


  • Thumbnail image of HAMP-9BF1A2

Record ID: HAMP-9BF1A2
Object type: BUCKLE
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a late Roman copper-alloy "dolphin" buckle of Hawkes and Dunning (1961) Type IA, dating to c.AD 350-450. Only one half remains, which takes the form of a confronted dolphin head with its mouth open and a prominant mane or ridge decorated with diagonal grooves running around the edge. The buckle has broken across the junction with the strap bar and at the meeting point of the confronted heads. The reverse is flat and undecorated.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Thumbnail image of SUSS-9BD1FC

Record ID: SUSS-9BD1FC
Object type: BUCKLE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
An complete copper alloy Medieval to early Post Medieval spectacle buckle dating c. 1350-1650 AD. The buckle is a 'spectacle' buckle with two oval loops and a narrowed strap bar.  On the reverse the inner edges of the loops are bevelled. A pin rest is present at the middle point of one of the loops, and the copper alloy wire pin is wrapped around the strapbar. The frame is undecorated and has a pale green patina. One loop of the frame is slightly bent upwards. Dimensions: Length 15.61mm; width: 20.57mm; thickness 2.66mm; weight 1.43g S…
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Thumbnail image of HAMP-9BD11D

Record ID: HAMP-9BD11D
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A small flat lozengiform copper alloy fragment 18.7mm in length with, on one side, two large ring-in-dot motifs and on the reverse, a stump of a ridge at one end, probably part of a catchplate. The fragment is bent in the middle. Probably part of the foot of an early medieval (Anglo Saxon) brooch of small-long type. See HAMP-EAAC20 for a complete example. Cf. MacGregor and Bolick (1993) p145-146, numbers 15.78 and 15.79.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Thumbnail image of HAMP-9BB786

Record ID: HAMP-9BB786
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval cast copper alloy sword belt fitting, circa 16th-17th century. The plate is flat with moulded foliate or vine scroll decoration. It has a trefoil terminal with a single central rivet hole containing the rusted remains of a rivet; below this is a tapering triangular plate which ends in a small trilobed terminal.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Thumbnail image of HAMP-9BA264

Record ID: HAMP-9BA264
Object type: MOUNT
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman cast copper-alloy 'vulvate' or 'coffee bean' mount dating to the later 2nd to 3rd century AD. The mount comprises an oval plate with damaged margin and a raised, central oval boss with a deep medial groove along its long axis. The reverse of the mount is concave with integrally cast projecting lugs, with flattened terminals at either end.
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Image not taken

Record ID: NMS-9B985A
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Three hard hammer struck flakes, two are end scrapers, the third is a simple flake. Tertiary flake, steeply retouched at the distal end to form the convex scraping edge, one side is also similarly retouched along its entire length with a shallow notch (c. 9.5 mm long, 2 mm deep) just below the platform. The flint is dark grey and has a very faint lighter patination. Recent chip to one side of the distal end. 54 x 31.5 x 9 mm, 17 g. Secondary flake, steeply retouched to the distal end to form the convex scraping edge, the retouch becomes less severe on the sides as it approaches the…
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


  • Image not taken

Record ID: SF-9B94EA
Object type: COIN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval silver groat of Elizabeth I (AD 1558-1603), first coinage, martlet issue mark, dating to AD 1560-1561 (N 1986). Tower of London mint. Ref: North 1975: 110. 
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Near Woodbridge', grid reference and parish protected.


  • Thumbnail image of SUSS-9B8DD8

Record ID: SUSS-9B8DD8
Object type: BUCKLE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Medieval to Post Medieval annular buckle dating c. 1350-1600 AD. The plain, circular frame has bevelled edges with a central bar. A short section of the frame is missing adjacent to the central bar. The copper alloy wire pin flattens where it is wrapped around the central bar. The object has a mid green patina. Measurements: diameter: 23.93mm; width of frame: 3.25mm; thickness of frame: 2.72mm and weight: 2.87g. Similar examples are shown in Whitehead, Buckles 1250-1800 (2003) p.44-45 dating c. 1350-1650. Egan and Pritchard (2…
Created on: Monday 27th June 2022
Last updated: Monday 27th June 2022
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 953,535
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,437,056
  • Mean quantity: 1.508
  • Maximum: 52,504

Filter your search

1 - 20 of 953,535 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.