Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type: 3306

  • Image not taken

Record ID: NMS-C0F5F5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a medieval copper alloy buckle frame, one corner with part of a straight edge and a stub of a narrower side. The distinctive engraved oblique lines and borders on the edge shows that the complete frame was almost certainly square with a central bar, cf. Egan and Pritchard 1991, no. 447. Extant length and width 7.2 and 22.5mm. Mid 14th - mid 15th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-C0D845
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy buckle: an oval cast frame with an offset, narrowed bar and a straight outside edge on which there are four grooves and two raised bands; a wire pin with a missing point; a sheet plate surviving at the fold only. Length and width of plate 13 and 14mm. 13th - 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-C000F2
Object type: NAIL CLEANER
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy probably nail cleaner with both ends missing, elongated triangular with the break at the apex end across a bifurcation. As the object narrows its thickness increases. Extant length and width 30.2 and 7.6mm. Thickness 0.3 - 1.2mm. Mid 1st - 4th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BFB26F

Record ID: SWYOR-BFB26F
Object type: HARNESS FITTING
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy harness fitting or hanging mount (fob or dangler) of late Iron Age or early Roman date ( about 100 BC - AD 80). It is a circular decorative mount with a three armed or triskele design. The object is openwork with a circular frame, and a central circular aperture between the three armed design. Each arm has a scroll at the outer end with a deep hollow in the centre of the scroll. This possibly once held a gem or enamel setting. The curved, comma shaped arms join to form the edge of the central hole. a groove along each arm contains traces a possible inlay, or maybe j…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BFA9AB
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Hod Hill brooch, the lower part of the bow missing. The arrangement of transverse and longitudinal grooves is very similar to Mackreth 2011, pl. 93, no. 9022, but the piece cannot be classified under Mackreth's typology because an insufficient proportion has survived. Extant length 17mm. Width of head 14.5mm. Mid 1st century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BF7F9B

Record ID: SWYOR-BF7F9B
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman buton and loop fastener probably dating from about AD 43 - 200. It does not fit into Wild's 1970 Classification, but has similarities to Class IV and Class V examples. It has a circular head which is domed, convex on the front and is just slightly concave behind. It is decorated with a circular cell on the apex containing the remains of glass or enamel, surrounded by a deep circular groove. Projecting from the reverse near thetop of the button is the shaft which has the characteristic 90 degree bend before forming a circular loop. The fastener has a smooth blue gre…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BEF2ED

Record ID: SWYOR-BEF2ED
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval silver groat of Henry VII (AD 1485 - 1509), facing bust issue, Class IIIc dating from AD 1490 - 1504. Pansy initial mark on obverse with a leopard's head on the reverse. Mint of London. See North (1991, page 102) number 1705. The coin is 27.2mm diameter, 0.9mm thick and 2.9g.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BEDCC1
Object type: BRACELET
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Roman copper alloy bracelet broken at both ends and distorted. Engraved decoration comprises a running S scroll between grooves terminating before one end at two broader transverse grooves. Cf. Crummy 1983, no. 1705. Width 5.2 - 5.7mm. Thickness 0.4mm. 3rd - 4th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BEBDED

Record ID: SWYOR-BEBDED
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval silver groat of Henry VII (AD 1485 - 1509), profile issue, dating from AD 1507 - 1509. Pheon initial mark. See North (1991, page 104) number 1747. The coin is 26.5mm diameter, 0.8mm thick and 2.98g.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BEA1CA
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap mount, sexfoil, domed with central perforation for missing rivet. Diam. 13.5mm. Height 4mm. See Egan and Pritchard (1991), 191, no.1016. 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BE9F0A

Record ID: GLO-BE9F0A
Object type: COIN
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Silver shilling of Elizabeth I Date 1584-1586 Obverse: crowned bust left. ELIZAB: D G ANG FR ET HIB REGI Reverse: shield on long cross fourchée POSVI DEV ADIVTOREM MEV Mint mark: Escallop There is a sub-oval hole (2mm in diameter) that has been punched through the obverse at 6 o'clock.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BE8D54

Record ID: SWYOR-BE8D54
Object type: COIN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval silver half groat of Elizabeth I (AD 1558-1603) dating from AD 1583 - 1603. Third issue. Initial mark: illegible. Mint of London. North (1991, 137) no. 2016. The coin is 16.3mm diameter, 0.5mm thick and 0.84g. It is bent and cracked and has patches of bright orange material (soil or corrosion) adhering to the surface.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BE6488

Record ID: GLO-BE6488
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy square Bristol Token Farthing Obverse: CB held within a circular border. Reverse: Port broadside partial view of a three-masted ship under sail and a fort (Bristol's coat-of-arms) held within a circular border.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BE6073
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval key for a casket, flat-sectioned shank with projecting pin, lozengiform bow with drilled perforation, sub-rectangular bit with step on outside edge. Length 33.5mm. Width of bow 10mm. Cf. Egan (1998), Medieval Households, fig.86. 12th-13th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BE5393

Record ID: GLO-BE5393
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy square Bristol Token Farthing Obverse: CB held within a circular border. Reverse: Port broadside partial view of a three-masted ship under sail and a fort (Bristol's coat-of-arms) held within a circular border.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BE51E8

Record ID: WMID-BE51E8
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy probable radiate, probably of Tetricus I (AD 271 to AD 274), dating to the period AD 271 to AD 274 (Reece Period 13). Probably SPES AVG reverse type depicting Spes holding up hem of dress, holding flower and walking left. Probably a Gallic Mint. Diameter: 17.8 mm Thickness: 1.4 mm Weight: 1.8 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BE3C5A

Record ID: GLO-BE3C5A
Object type: COIN
Broad period: ROMAN
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a heavily worn copper alloy possible sestertius, unreadable ruler dated to AD 43-260. Obverse, bust facing right [...], reverse no detail remains [...]
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BE2716

Record ID: WMID-BE2716
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy radiate of Tetricus I (AD 271 to AD 274), dating to the period AD 271 to AD 274 (Reece Period 13). SPES AVG reverse type depicting Spes holding up hem of dress, holding flower and walking left. Probably a Gallic Mint. Diameter: 20.9 mm Thickness: 2.1 mm Weight: 3.6 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BE1E1A

Record ID: SWYOR-BE1E1A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy post-medieval trade token of 17th century date, issued by Samuel Watts of Halesworth, grocer. *SAMVEL * WATTS* = The Grocer's arms [*IN.]HALSWORTH = W // S M See Williamson (1967), 1082, no.146 cited in SF-A944E3. The token is 15.9mm diameter, 0.9mm thick and 0.88g. Die axis: 12 o'clock
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BE0556

Record ID: GLO-BE0556
Object type: BUCKLE
Broad period: MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy buckle that has a rectangular frame with an offset spindle for the pin, the side of the pin is expanded to form a locking arm, now broken.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BDFD4A

Record ID: WMID-BDFD4A
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete heavily worn silver shilling of William III (AD 1694 to AD 1702), dating to the period AD 1694 to AD 1702. Probably minted in London. Spink 2007, p349-52, no 3497-3516. Diameter: 24.5 mm Thickness: 1.0 mm Weight: 2.5 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BDF9EE
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval biface lead token, with on one face the letter P and an off-centre pellet, and on the other a letter or number largely obscured by a large off-centre blob. Dimater 12.5mm. 16th - 18th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BDF03E
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constans or Constantius II, reverse FEL TEMP REPARATIO type with soldier dragging barbarian from hut, mintmark and further details illegible, AD348-50
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BDE674

Record ID: GLO-BDE674
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy book clasp. This example is rectangular in plan with an expanded butt; the forward edge has a narrowed tab that has been bent around to form a hook. The artefact is decorated with a quatrefoil flower ring near the hook, behind which appears to be a series of geometric patterns which are no worn away. At the rear is a single rivet hole that still retains some of the iron rivet. Artefacts such as this have been discovered during excavation in York which dated to the 15th and 16th centuries (Ottaway & Rogers, 2002, 2937-2939)
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BDE218
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Elizabeth I, Tower, escallop initial mark, North 2016, 1584-7
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BDE0CE

Record ID: WMID-BDE0CE
Object type: CURTAIN FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy ring or loop which functioned as a curtain fitting, of Post Medieval dating (15th to 17th Centuries AD). It is sub-circular in shape with a circular cross section with bevelled edges. In profile the loop is flat. It measures 16.5 mm external diameter, 13.0 mm internal diameter and 2.0 mm thick. The ring is 2.1 mm wide. It weighs 0.9 grams. The curtain fitting is a dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in the loss of some of the original surface detail. Similar rings are illu…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BDDC46
Object type: WEIGHT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval or post-medieval lead sub-conical weight with a median hole. Perhaps for use with a line or net. Height 23mm. Basal diameter 15mm. Hole diameter 7 - 2.5mm. Weight 24.22g. 13th - 17th century
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BDD5A2

Record ID: SWYOR-BDD5A2
Object type: BULLA
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy Medieval papal bulla dating from AD 1254 - 1261. It is a bulla of Pope Alexander IV (AD 1254-1261). The seal is circular with a vertical longitudinal hole through the centre for the string to which it was attached. The reverse is very scratched round the edge. The obverse depicts the heads of St Peter and St Paul facing each other, with the heads surrounded by beaded borders. The letters: SPA SPE above and a long cross in the centre. The reverse lettering on three lines reads: A[LE]/[X]ANDER/[PP]IIII with an omega placed above the PP, which indicates that this abbreviati…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BDCE4D

Record ID: WMID-BDCE4D
Object type: CURTAIN FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy ring or loop which functioned as a curtain fitting, of Post Medieval dating (15th to 17th Centuries AD). It is sub-circular in shape with an irregular circular cross section with bevelled edges. In profile the loop is flat. It measures 26.7 mm external diameter, 17.2 mm internal diameter and 2.5 mm thick. The ring is 4.7 mm wide. It weighs 4.6 grams. The curtain fitting is a dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in the loss of some of the original surface detail. Similar rin…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BDC23D

Record ID: GLO-BDC23D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy double looped buckle. Sub-oval frames, the strap bar is narrowed with a knop moulding at either end. The forward edge of the frame is expanded with a moulded flower design in the centre that is flanked by two forward projecting knops, one frame is truncated. Date 1550-1650.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BDC055
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Henry VII, Canterbury under the King and Archbishop Morton, heavily clipped and initial marks uncertain, perhaps a pansy on the obverse, North 1712, further details illegible, c.1490-1500
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BDAD0D
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval lead heart-shaped weight with remains of an iron suspension loop embedded in the top. Length, width and thickness 22, 24.4 and 7.6mm. Weight 24.54g. No correlation with either the troy or avoirdupois systems. 16th - 18th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BDAC47

Record ID: GLO-BDAC47
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Double looped buckle with plain oval frames,narrowed strap bar with a knop at either end. Date 16th - mid 17th century
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BD9681
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward II, class 11a2, Canterbury, North 1060/2, c.1310-14
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BD8D49

Record ID: GLO-BD8D49
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy 'male' tag from a pair hooked tags The tag has a sub-oval plate with a large rectangular hook at one end. Immediately behind the hook are two pierced knops for attachment. The centre of the plate is decorated with a foliate design. This artefact dates to the 16th - 17th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BD876E
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward I, London, class 3d, North 1019, 1280-1
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-BD78A1

Record ID: SWYOR-BD78A1
Object type: ADZE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
A Neolithic flint flaked adze dating from 4000 - 2200 BC. The adze (or asymetric axe) is formed on dark grey high quality flint which is not patinated and which has few inclusions. It is sub-recatngular, tapering from a cutting edge of 40.5mm wide, to a rounded butt of 18mm wide. The sides are straight apart from the corners of the cutting edge which taper slightly. In cross section, the axe has a pointed oval asymetrical shape, being flatter on one face than the other. It is invasivly worked with covering, scaled, semi-abrupt retouch, with smaller removals from the edges. It is 127.4m…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BD77E3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a post-medieval copper alloy shoe buckle, a "cooking pot" shaped chape without any part of the pin or spindle. Length 19.4mm. Width 23.7mm. c.1690 - c.1720.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BD7224

Record ID: GLO-BD7224
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy double looped buckle. Sub-oval frames, the strap bar is narrowed with a knop moulding at either end. The forward edge of the frame is expanded with a moulded trefoil design in the centre, one frame is truncated. Date 1550-1650.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BD65DF

Record ID: GLO-BD65DF
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy double looped buckle. Sub-oval frames, the strap bar is narrowed with a knop moulding at either end. The forward edge of the frame is expanded with a moulded flower design in the centre, one frame is truncated. Date 1550-1650.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BD47FA
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Just over half of a post-medieval copper alloy double-looped buckle frame, both loops oval, with two small lobes at the ends of the bar and an engraved chevron in the centre of the edge. Estimated length 32mm. Width 26mm. 16th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BD44FF
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver farthing of Edward I, London, North class 6-7, Withers type 16, North 1055, 1292-6
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-BD3453

Record ID: KENT-BD3453
Object type: KEY (LOCKING)
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete Early Medieval copper alloy slide key, dating to the period AD 850-1066. It has a flat handle which is circular in plan with projecting knops at the sides and a large central circular perforation. Beneath the handle is a narrow transverse 'collar'. Below this protrudes a rectangular cross secectioned shank which terminates in an integral openwork bit. The bit is roughly square in plan and cross-section. It has two internal projections. At the base of the bit is a small square projection with square notch on the interior. From this extends a T shaped projecting terminal that…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BD22A5
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, voided long cross class 3b, mint and moneyer uncertain, 1248-50
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of GLO-BCE5C6

Record ID: GLO-BCE5C6
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation Find awaiting validation
Double looped buckle with plain oval frames, one frame is truncated, narrowed strap bar with a knop at either end, copper alloy pin is still in place. Date 16th - mid 17th century
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BCE478
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval gilt copper alloy double-looped buckle frame, both loops oval, with a lobe at the ends of the bar and a D-sectioned pin. Both edges are internally widened in the centre making the loops describable as B-shaped. Length and width 43.5 and 32.8mm. 16th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BCC317
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy composite strap end. Two rectangular sheet of equal size are attached with one rivet, with a gap of c.2mm between them. The undersides of both are covered with solder which is thickest at the end opposite the rivet, and which shows hints of the former presence of a forked spacer. Length and width 17.7 and 14.4mm. 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-BC95E9

Record ID: LANCUM-BC95E9
Object type: CREMATION
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Multiple fragments of cremated bone. Associated with a cremation probably human from a Bronze Age cairn. The length is 45-3mm, the width is 11-3mm and the weight 15.24g. Associated with LANCUM-06AA41, LANCUM-0633E7, LANCUM-064172, LANCUM-0788A0, and LANCUM-069462.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BC84D9
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy D-shaped strap loop with a collared knop at the top and (missing) separate internal rivet. Cf. Egan, G. in Griffiths et al. 2007, nos. 1449-51. 14.8 x 20.8mm. 11mm internally. 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BC6A07
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy strap loop with a curved top and twin internal projections. Cf. Egan and Pritchard 1991, no. 1265. 23.9 x 14.8mm. 17mm internally. 13th - 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BC37C9
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a medieval gilt copper sub-pentagonal buckle frame, one side and one half of the outside edge with two dome-headed decorative rivets or studs. One speck of gilding has survived. Very similar to examples from Meols and Staines (Egan, G. in Griffiths et al. 2007, cat. no. 759). Estimated length and width 23 and 28mm. 13th - 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BBC69E

Record ID: WMID-BBC69E
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy flat spindle whorl, of Roman to Post Medieval dating (AD 43 - AD 1650). The spindle whorl is sub circular in shape, and rectangular in cross section. The central hole is sub circular in shape and has been cast slightly off central. The internal diameter of the hole measures 7.2 mm wide. Both the upper and lower faces are flat. No decoration is present on either surface. The whorl has a diameter of 19.8 mm and is 4.2 mm thick. It weighs 7.2 g (0.25 oz). The whorl is of a light to mid grey colour, with an even surface patina. Abrasion, caused by movement …
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BBAF76

Record ID: WMID-BBAF76
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy rim fragment from a copper alloy probable posnet or cauldron of Late Medieval to Early Post Medieval dating (AD 1400 -AD 1700). The rim fragment is sub triangular in shape, with a sub rectangular cross section. A smooth and polished surface are present on the interior. The rim type consists of a rounded lip. The exterior surface is unpolished and shows signs of finishing/filing. Sooting is present on the exterior of the fragment. This section is most likely from the out turned rim of a cauldron or posnet (See Fig 1 in Butler, Green and Payne 2009 for example…
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BB99A7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a medieval copper alloy double-looped buckle frame, one straight side with stump of a narrower central bar and with a rabbet at both ends. No part of the edges is present. Engraved decoration comprises six chevrons between a pair of lines. The two narrow faces are covered in file marks. The complete frame probably resembled Egan and Pritchard 1991, nos. 447 and 450 and Whitehead 2003, no. 482. Length 39.1mm. c.1350 - c.1450.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BB32D7

Record ID: WMID-BB32D7
Object type: COIN
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
An incomplete clipped silver half real, of Ferdinand and Isabella of Spain (AD 1469 to AD 1504), dating to the period AD 1469 to AD 1504. Probably Minted in Seville. Diameter: 18.2 mm Thickness: 0.6 mm Weight: 1.0 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BB22AC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy rectangular buckle frame with two longitudinal filed grooves on the front of the thick outside edge, cf. Egan and Pritchard 1991, nos. 434-6. Length and width 14.5 and 10.5mm. Second half 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BAFD18

Record ID: WMID-BAFD18
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver sixpence of Elizabeth I (AD 1558 to AD 1603), dating to the period AD 1568. Minted at the Tower (London). Mintmark: Coronet. North vol 2, p 134, no 1997. Diameter: 24.4 mm Thickness: 0.7 mm Weight: 2.7 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BADBBE
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval sheet copper alloy shield-shaped strap end with a notch on both sides, broken across a rivet-hole, inside edge missing, and a second rivet hole with copper alloy rivet secures the C-shaped bar mount and retains a rectangular rove on the reverse. Extant length 13mm. Width 11mm. Cf. Egan and Pritchard 1991, fig. 103. c.1300 - c.1450.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BAC359
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy oval buckle frame with an incomplete iron pin, an offset, narrowed bar, and an outside edge recessed between knops for a missing sheet roller. Cf. Egan and Pritchard 1991, nos. 288 and 298. Length and width 18.8 and 17mm. 13th - 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BAC0A1
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of medieval to post-medieval copper alloy vessel, body sherd, no surviving original edge. Weighs 5.21g. 14th - 17th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BABB50
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, voided long cross class 5, mint and moneyer uncertain, 1251-72
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BAB9A5

Record ID: WMID-BAB9A5
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifacial token, of Medieval to Post Medieval dating (c. AD 1300 to c. AD 1700). The obverse depicts a six petalled flower design. Powell type 1. The reverse is undecorated. Diameter: 25.2 mm Thickness: 2.8 mm Weight: 9.9 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BAAC5D
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of medieval to post-medieval lathe-turned copper alloy everted vessel rim, turning line on outer face. Diameter 170mm. 1.5mm thick. Weighs 2.05g. 15th - 16th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BAA922
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton of Hans Schultes III, Nuremberg rose-orb type, Mitchiner 1402 (same dies), 1608-12
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BAA8E1

Record ID: WMID-BAA8E1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifacial token or possible weight, of Medieval to Post Medieval dating (c. AD 1300 to c. AD 1700). The obverse depicts a long cross. Powell type 14. The reverse is undecorated. Diameter: 32.0 mm Thickness: 5.8 mm Weight: 36.0 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BAA746
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy oval buckle frame with a rectangular-sectioned cast pin, a narrowed bar, and a convex outside edge with a V-sectioned pin groove. There is a transverse rib or grip on the pin next to the loop. All surfaces of the frame carry profuse file marks. This hand working has resulted in the cross-section of the bar being pentagonal and that of the sides and outside edge hexagonal. Length and width 21.7 and 35.4mm. 14th - mid 15th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BA9517
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Scottish halfgroat of Charles I, Earl of Stirling's issue, rosette initial mark, 1632-9
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BA8E60
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval cast copper alloy buckle pin with hollow under point, sub-rectangular sectioned shank and a rectangular boss or grip with transverse groove at the the loop, most of which is missing. Length 41.5mm. 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-BA8D05

Record ID: WMID-BA8D05
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy unifacial token, of Medieval to Post Medieval dating (c. AD 1300 to c. AD 1700). The obverse depicts multiple diagonal lines crossing in the centre. Powell type 3. The reverse is undecorated. Diameter: 24.2 mm Thickness: 2.2 mm Weight: 7.5 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BA7A00
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Irregular copper alloy farthing of Charles I, further details illegible, c.AD1625-34
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BA5904
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of Roman copper alloy Colchester Derivative Harlow brooch - foot of bow of sub-triangular cross-section (granular recent break) and an incomplete solid catchplate. Length 35mm. Width 6mm. c.43 - c.75.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-BA2654
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy radiate of uncertain later Gallic emperor, further details illegible, c.AD269-74
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-B9FE16
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy oval buckle frame with an incomplete pin, offset, narrowed bar and about nineteen filed transverse and radial grooves on the sides and the convex outside edge. Surface damage has entirely removed some grooves. A deep groove with traces of rocker-arm engraving runs for the same distance along the outer face of the outside edge. The pin, though quite flimsy and not obviously cast, is decorated with a narrow transverse rin next to the loop. Length and width 22 and 38.5mm. Late 13th - 14th century.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-B9DE5C
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy radiate or nummus, utterly illegible, c.AD260-378
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-B9BE6E
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, reverse and further details illegible, c.AD330-64
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-B9AB66
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, reverse GLORIA EXERCITVS 1 standard type, mintmark and further details illegible, AD335-41
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-B995EB
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constantine I, reverse GLORIA EXERCITVS 2 standard type, mintmark illegible, AD330-5
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-B9903C

Record ID: WMID-B9903C
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead or lead alloy unifacial token, of Medieval to Post Medieval dating (c. AD 1300 to c. AD 1700). The obverse depicts a long cross with a pellet in each quadrant. Powell type 14. The reverse is undecorated. Diameter: 22.8 mm Thickness: 4.9 mm Weight: 9.4 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-B971D6

Record ID: WMID-B971D6
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of Henry III (AD 1216 to AD 1272), dating to the period AD 1250 to AD 1256. Minted in London by moneyer Willem. Class 5c. North vol 1, p 227, no 993. Diameter: 18.2 mm Thickness: 1.0 mm Weight: 1.4 g
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-B94DC2

Record ID: WMID-B94DC2
Object type: NUT CRACKERS
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy set of nut crackers, of Late Post Medieval to Early Modern dating (Late 17th Centuries AD). Approximately 50% of the nut crackers is present, consisting of one complete arm and hinge. The complete arm tapers gently from the hinge down towards a flat cyclindrial terminal. The hinge consists of two sub circular lugs, one on either side of the arm, each with a central perforation (hole). The perforation has an internal diameter of 2.6 mm. One hole is empty, the other contains part of the iron axis pin securing the two arms together. The top part of the arm is …
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-B8DE8D

Record ID: SWYOR-B8DE8D
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy radiate of Claudius II dating from the period AD 268 - 270 (Reece period 13). The reverse depicts a standing woman holding a cornucopia or torch, but she is not clearly visible enough to identify her. The legends are also illegible. The coin is 16mm diameter, 2mm thick and 2.18g.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-B867B9

Record ID: SWYOR-B867B9
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy nummus of Constantine II (AD 317 - 340) dating from the period AD 335 to 337(Reece period 17). GLORIA EXERCITVS reverse type depicting two soldiers holding one standard. Mint of Lyon. See LRBC number 226, 229 or 232 on page 8. The coin is 16.5mm diameter, 1.4mm thick, 1.54g.
Created on: Tuesday 7th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-AD68FA

Record ID: NMS-AD68FA
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy traders token of John Borrows, Ironmonger in Bicester Oxfordshire. Obverse; I.B in centre, IOHN BORROWS IRON. Reverse; I.B in centre, MONGER IN BISTER. Williamson No. 37. Circa 1642-1672
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-AA6A83

Record ID: SWYOR-AA6A83
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy nummus of Valentinian I (AD 364-375) dating from the period AD 367 to 375 (Reece period 19). SECVRITAS REI PVBLICAE reverse type depicting Victory advancing left holding wreath and palm. Mint of Arles. See LRBC number 512 or 513 on page 56. The coin is 17.9mm diameter, 1.8mm thick, 1.73g. The edge is chipped in places.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-AA36AB

Record ID: SWYOR-AA36AB
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy coin; a contemporary copy of a nummus of the House of Constantine (AD 307-361) dating to the period AD 330 to 340 (Reece period 17). VRBS ROMA reverse type depicting Romulus and Remus suckling from a she wolf. Probably prototype was mint of Lyon. Compare LRBC number 184 on page 7. The coin has a lump of corrosion on the reverse. It measures 12.6mm diameter, 1.4mm thick and 1.03g.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-AA076A

Record ID: SWYOR-AA076A
Object type: COIN
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver coin; a cut half voided long cross penny of Henry III (AD 1216 - 1272), probably class Vc dating from AD 1250 - 1256, probably issued by Henri at London. See North number 993. The coin is 17.8mm long, 8.6mm wide and 0.7mm thick. 0.56g.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-AA076E

Record ID: DUR-AA076E
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of Edward I (AD 1272-1307). Class 10ab5. Long cross reverse with three pellets in each quadrant. Bury St. Edmund mint. AD 1301-1310. North Vol II, P 31, No 1039/3.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-A9F574

Record ID: DUR-A9F574
Object type: MOUNT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy mount of late Medieval to early Post-Medieval date (AD 1400-1600). The object consists of a domed head with six semi-circular lobes around its edge and a decorative pattern consisting of three intersecting incised lines, creating a petal like design. The reverse of the head is slightly concave with a single, central, integral rivet projecting from it. The rivet has a square section and tapers to a hooked point. The upper surface of the mount retains patches of a red (possible enamel) and silver coloured (white metal) decoration. The metal is a dark green in col…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-A9DC7B

Record ID: DUR-A9DC7B
Object type: MICROLITH
Broad period: MESOLITHIC
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete flint microlith of late Mesolithic date (7000-3500 BC). The lithic is sub-rectangular and plano-concave in profile. The dorsal surface contains three predominant negative scars with corresponding arrises. The proximal edge has been blunted and the distal end tapers into a point due to a notched facet on the left hand edge. All edges contain semi-abrupt retouch. The ventral surface is concave with ripples of percussion emanating from the distal end. The lithic retains no cortex and is therefore a tertiary flake. The flint is a mid-brown in colour with cream inclusions.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-A9C6EA

Record ID: DUR-A9C6EA
Object type: MICROLITH
Broad period: MESOLITHIC
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete flint microlith of late Mesolithic date (7000-3500 BC). The lithic is sub-triangular and concavo-convex in profile. The dorsal surface contains three predominant negative scars with corresponding arrises. A minor amount of cortex is retained at the proximal right hand edge. The proximal edge has been blunted, the distal end tapers to a point and both the left and right hand edges contain semi-abrupt retouch. The ventral surface is steeply concaved with ripples of percussion emanating from the distal end. The lithic retains a minor amount of cortex and is therefore a secondar…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-A99CF6

Record ID: DUR-A99CF6
Object type: DEBITAGE
Broad period: MESOLITHIC
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete flint worked flake of late Mesolithic date (7000-3500 BC). The lithic is sub-ovate with two predominant negative scars and corresponding arrises on the dorsal surface. The proximal end has been blunted and the right hand distal end has a notched aspect. All edges, with the exception of the proximal, have rough abrupt retouch. The ventral side has distinct ripples of percussion emanating from the proximal end. The flake retains no cortex and is therefore a tertiary flake. The flint is light grey in colour with cream inclusions throughout.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A98CF7
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A worn copper alloy Roman nummus of the House of Valentinian dating to the period AD 364 - 378 (Reece period 19). GLORIA ROMANORVM reverse type depicting emperor advancing right holding standard and dragging captive. Uncertain mint.
Created on: Monday 6th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-A9839F

Record ID: DUR-A9839F
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead spindle whorl of Early-Medieval-Post-Medieval date (AD 410-1800). The object is broadly circular and convex with an off centre circular perforation. The lower face in flat while the upper is convex. There are no traces of a decorative pattern. The metal is a light grey in colour Lead spindle whorls were commonly used from the Iron Age through to the post-medieval period and are difficult to date with any certainty. Decorated examples are thought to date to the medieval to post-medieval periods while undecorated examples cannot be securely dated without supporting cont…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A97E4C
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of Valentinian dating to the period AD 364-375 (Reece period 19), SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left, mint of Arles.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A97764
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of House of Valentinian dating to the period AD 364-378 (Reece period 19), SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left, uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A971DE
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of House of Valentinian dating to the period AD 364-378 (Reece period 19), SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left, uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A964F8
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of House of Valentinian dating to the period AD 364-378 (Reece period 19), SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left, uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of DUR-A95F7A

Record ID: DUR-A95F7A
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy blundered styca of Early-Medieval date (Ad 820-867). Northumbrian blundered type. Moneyer name around ring and dot reverse type. Moneyer blundered. Northumbrian Mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A959D7
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A contemporary copy of a copper-alloy Roman nummus of Constantius II dating to the period AD 353-361 (Reece period 18), FEL TEMP REPARATIO reverse type depicting a soldier spearing a fallen horseman. Mint of Lyon.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A94E82
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A contemporary copy of a copper-alloy Roman nummus of Constantius II dating to the period AD 353-361 (Reece period 18), FEL TEMP REPARATIO reverse type depicting a soldier spearing a fallen horseman. Uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A94624
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A contemporary copy of a copper-alloy Roman nummus of Constantius II dating to the period AD 353-361 (Reece period 18), FEL TEMP REPARATIO reverse type depicting a soldier spearing a fallen horseman. Uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A9358A
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Eight copper-alloy Roman radiates or nummi of an uncertain ruler dating to the period AD 260-402, uncertain reverse type and mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A8EE8A
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman radiate of Claudius II dating to AD 269 (Reece period 13), P M TR P II COS P P reverse type depicting the emperor standing left, holding branch and short sceptre. Mint of Rome. RIC no. 10.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A8D5A3
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman radiate of Victorinus or Tetricus I dating to the period AD 269-274 (Reece period 13), uncertain reverse type, Gallic mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A8AEED
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman radiate of an uncertain ruler dating to the period AD 260-275 (Reece period 13), uncertain reverse type and mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A89754
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, CONSTANTINOPOLIS Victory on prow type, mintmark illegible, AD330-5
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A8880A

Record ID: KENT-A8880A
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A halfpenny of Henry V (AD 1413-1422) Minted in London. North , no.1412, Withers type 12 . CIVITAS LONDON (long cross pellets in each angle) reverse.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A88111

Record ID: WMID-A88111
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy terminal or base, of uncertain function, but probably Post Medieval in dating (AD 1500 to AD 1800). The artefact consists of a circular pedestal base with file marks or stratches present. From the base, it widens into a cylindral socket. Four thin circular collars are present at the shoulder between base and socket. The third collar is wider than the others. The top of the socket looks complete, with no post depositional damage. The socket is 9.3 mm deep. It measures 19.4 mm tall, and has a maximum diameter of 23.3 mm. The base has a diameter of 14.3 mm. The …
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A87E43
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward I, class 10cf1, Durham, North 1040, 1305-6
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A87A6C
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman radiate of Victorinus dating to the period AD 269-271 (Reece period 13), PIETAS AVG reverse type depicting Pietas standing left. Gallic mint II. Cunetio 2572.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A867C4
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of William the Lion of Scotland (or Alexander II), moneyer hV[...] of uncertain mint, 1205-30
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A850B7

Record ID: KENT-A850B7
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival Silver halfpenny of Richard II (AD 1377-1399). Minted in London. c. AD1377-99. North 1331a.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A84DA6
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Silver halfpenny of the Commonwealth, Tower, North 2730, 1649-60
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A836F6
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Worn and incomplete and distorted Roman copper alloy Aucissa or Hod Hill brooch, broken across the perforated rolled head, catchplate missing. The bow is of a flat D-section with a median line of punched dots. Cf. similar Mackreth 2011, pls. 90-2. Width of head 10mm. Extant length distorted 34mm. c.43 - c.75 AD.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A83661
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Charles I, Tower, initial mark and further details illegible, 1625-49
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A83593

Record ID: KENT-A83593
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival Silver halfpenny of Richard II (AD 1377-1399). Minted in London. c. AD1377-99. North 1331a.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A815F1

Record ID: KENT-A815F1
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver halfpenny of Edward III. Minted in London, Withers type 11, florin coinage, North 1332, 1344-51
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A80EFD
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward II, class 15b, Canterbury, North 1067, c.1320-33
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A7F701

Record ID: WMID-A7F701
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy strap end of probable Late Early Medieval dating (AD 750 to AD 1100). Around 50% of the strap end is present, with the lower end missing and the top edge incomplete. The top of the strap end has a split attachment end, with two incomplete rivet holes, which would have secured the strap end onto the strap. A circular sectioned copper alloy rivet is present in one of the rivet holes. Below the split top, the strap end widens into a plate. The front has been decorated. A sub circular border is present, consisting of a single row of punched dots. A second row is…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A7EE7C
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, voided long cross class 3 or 4, moneyer Nicole of Canterbury, 1248-51
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-A7ED4F

Record ID: PUBLIC-A7ED4F
Object type: MUSKET BALL
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A cylindrical, lead alloy artefact, possibly a form of musket shot of Post-Medieval date (about AD 1600 - 1800) known as a plug. The ends are cut flat. On one side appears to be a scratch from one end to the other indicating a possible firing. The artefact has a pale, brownish-grey patina. It is 11.75mm long and 12.33mm in diameter. It weighs 15.0gm. Compare SWYOR-A7FE62 and Harding (2012) Lead Shot of the English Civil War: a Radical Study, plate 42.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A7D621
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton, rose-orb type, garbeld legend on reverse, obverse uncertain, either anonymous or Hans Schultes I, c.1550-84
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A7C4F3
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Rearhook brooch, the pin, the spring, and the foot of the bow and catchplate missing. The wings are both decorated with a broad spool, D-sectioned bow with worn traces of twin ribs with median groove and with a rib along both edges. Mackreth 2011, CD RH. Wingspan 20mm. Extant length 25mm. c.43 - c.65.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WILT-A7AD8C

Record ID: WILT-A7AD8C
Object type: STRAP END
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval copper alloy composite strap-end complete with forked spacer and two sheet plates dating to AD 1350-1450. The front copper-alloy sheet is damaged and incomplete. It measures 65.95mm in length, 16.65mm wide, 5.2mm thick and weighs 11.65 grams. The strap end is held together with two c.2.2mm diameter rivets, one at either corner of the open end. Between is a circular aperture which is 4.2mm in diameter on the front face and 2.85mm on the reverse. It tapers over its length (c.66mm) to 14.95mm wide before curving steeply inwards on both sides to 6.55mm. It is here th…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A7AA02

Record ID: KENT-A7AA02
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival Silver halfpenny of Richard II (AD 1377-1399). uncertain mint. c. AD1377-99. North 1331a.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A79258
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle plate with drilled hole for missing pin, frame recesses, two rivet-hole, one with copper alloy rivet, slightly concave attachment-end. Face with bordering line of interrupted rocker-arm. Length 43mm. Width 14mm. 13th - 14th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A783CA

Record ID: KENT-A783CA
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival Silver halfpenny of Richard II (AD 1377-1399). Minted in London, c. AD1377-99. North 1331b.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A7617C

Record ID: WMID-A7617C
Object type: BROOCH
Broad period: IRON AGE
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete probable Birdlip or beaked bow brooch, of Late Iron Age dating (50 BC to AD 50). Around 25% of the brooch is present, consisting only of part of the bow. The brooch fragment is sub rectangular in shape. At the head of the brooch, it narrows, and would have extended into the spring. Beneath this are two semi circular collars. A third moulding is located underneath the two collars, this curves downwards and outwards, this forms a 'beak'. The bow underneath the moulding is flat, with an engraved vertical line down either side. The reverse is flat and undecorated. It measur…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-A759A6

Record ID: NMS-A759A6
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy silvered button of the Bath Volunteers. The button has a convex face with a central crown and the peripheral words BATH above and VOLUNTEERS below. The reverse is concave and there is no backmark. The Bath Volunteers were a English volunteer infantry militia with a battalion strength of 712 commanded by Lt. Col John Strodes and Thomas Joyce. They were banded from 1803 to 1808 AD.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A74346

Record ID: KENT-A74346
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A clipped silver halfgroat of Henry VII (AD 1485-1509). Ref: North no. 1712, IIIb (1975: 84). 'Facing bust' issue, struck at Canterbury, and probably issued jointly under Archbishop Morton (AD 1486-1500) and the king.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-A72A55

Record ID: LANCUM-A72A55
Object type: BUTTON
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy button of the Post-Medieval period. It is slightly domed on the front and has an elaborate moulded rosette flower design, with a copper alloy wire loop on the back which is flat and undecorated. It has a greenish brown patina. 17th century. The diameter is 22mm and the weight 5.02g.
Created on: Monday 6th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A72A1B
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy furniture fitting, a flat mount of thick sheet with an attachment holes in a lobe, parts of two rounded convex edges and decoration of curving engraved lines and punched annulets. The edges are chamfered on the reverse. Extant length and width 34 and 26mm. Thickness 0.9mm. c.1660 - c.1730.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A716BF
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval strap fitting, a mount with a flat quatrefoil head and an integral round-sectioned and pointed rivet on the reverse. The head, part of which is missing, was divided by four V-sectioned notches, one of which is missing and two others incomplete. The pointed end of the rivet indicates that the object was not mounted and the end not hammered. Length 8.7mm. Estimated width of head 17mm. 15th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A6CDF8
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A contemporary copy of a copper-alloy Roman nummus copying Constantius II dating to the period AD 353-361 (Reece period 18), FEL TEMP REPARATIO reverse type depictin a soldier spearing a fallen horseman. Uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-A6C8A9

Record ID: NMS-A6C8A9
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Worn and corroded radiate of Tetricus I. Reverse; standing female figure. Further details illegible. Reece period 13. Circa 271-274 AD.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A6C338
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval discoidal ¾-ounce avoirdupois lead trade weight stamped on the front face with the arms of Norwich, a small quatrefoil and a crowned IR, the royal cipher of James I (1603-25) or James II (1685-8). Diameter 28mm. Thickness 3.3mm. Weight 20.52g / 0.7240oz.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-A6A64E

Record ID: LANCUM-A6A64E
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Late Medieval/early post-Medieval cast copper alloy cup weight, 13th-16th century. Dish shaped with flat base, straight sloping sides, and concave internally. The plain flat rim is decorated with at least 7 unevenly spaced pelleted annulets (others are now obscured). It has a green patina; the internal surface is roughened in places and a lighter green than the rest of the vessel or brown. The diameter is 19mm and the weight 11.79g. See DENO-54E403 for a similar example.
Created on: Monday 6th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WILT-A69FF4

Record ID: WILT-A69FF4
Object type: COIN
Broad period: ROMAN
County: Swindon
Workflow stage: Awaiting validation Find awaiting validation
A contemporary copy of a copper-alloy Roman nummus possibly copying Constantius II dating to the period AD 353-361 (Reece period 18), possible FEL TEMP REPARATIO reverse type depictin a soldier spearing a fallen horseman. Uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A683B2
Object type: COIN
Broad period: ROMAN
County: Swindon
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of the House of Constantine dating to the period AD 330-335 (Reece period 17), VRBS ROMA Wolf and twins reverse type. Uncertain mint.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A6803E
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a post-medieval sheet copper alloy furniture mount with part of a scalloped edge, one attachment hole, two fan-shaped apertures and part-annular stamped impressions. Extant dimensions 28 x 22mm. Thickness 0.7mm. c.1660 - c.1730.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-A66A9F

Record ID: LANCUM-A66A9F
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy loop chape from a two piece shoe buckle of the Post Medieval period. It is of the "Cooking pot" form (Whitehead 1996) with a double internal spike. It has a single tongue suggesting a date of c1690-1720. Its size also suggests this earlier date as buckles tended to become larger after 1720. It has a greenish patina. The buckle frame is missing. The length is 38mm, the width is 27mm and the weight 6.08g.
Created on: Monday 6th July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A65235

Record ID: KENT-A65235
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver coin: groat of Henry VI (1427-1430). Rosette-Mascle issue, minted in Calais 1427-1430. mascla and saltires stops. Cross II. North number 1446.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-A63656

Record ID: PUBLIC-A63656
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
Cast, lead palm guard, probably dating from the 17th-20th century (c. AD 1600 - c. AD 1950). It is a rounded oval, with convex and concave surfaces. The convex side has two small oval depressions near the centre. These are believed to have been used to push a needle through a tough material. Leather workers' palm guards are discussed in an article in Gordon Bailey's 'Detector Finds 2', 1993, pages 64-5. Dating of these artefacts is very difficult; the earliest examples seem to date from the 17th century, although they may have been in use right through to the 20th century (Bailey, 199…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A6116A
Object type: KEY (LOCKING)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy rotary key with twin internal projections in a kidney-shaped bow, a triple ribbed moulding at the top of a solid shank, and a simple bit. Length 36mm. Width of bow 17mm. Cf. Read 2001, 67-8, fig. 47 nos. 564-7. c.1550 - c.1700.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A60987

Record ID: WMID-A60987
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy bifacial token, of Medieval to Post Medieval dating (c. AD 1300 to c. AD 1700). The obverse depicts a long cross. Powell type 14. The reverse is exhibits a shorter cross. Powell type 14. Diameter: 17.4 mm Thickness: 4.3 mm Weight: 3.1 g
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A5FE99
Object type: SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy hooked spur leather attachment with an incomplete hook, a riveted stud, the head of which is teardrop-shaped, and a lateral lobes before the hook. Cf. Read 1995, nos. 807 and 1060. Extant length 25.5mm. Width 8.4mm. 17th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A5F761

Record ID: KENT-A5F761
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver Groat of Edward V (AD 1483). Minted in London c. AD 1483. sun and rose inital mark. North Number 1672.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-A5F3CD

Record ID: PUBLIC-A5F3CD
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy sub-rectangular shoe buckle. The object is drilled for a separate spindle with iron corrosion remaining within the drilled holes. The surface is tinned and decorated with sloping ridges. The strap bar and pin are missing. Similar examples (though none with the same design) can be found in Whitehead no. 637 onwards and have been dated about AD 1690 - 1800 Length 43.74mm, Width 36.48mm, Height 12.81mm Thickness 3.25mm Weight 10.01gms
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A5E262

Record ID: WMID-A5E262
Object type: RETOUCHED FLAKE
Broad period: MESOLITHIC
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete teritary debitage flake, of probable Mesolithic to Early Neolithic dating (6500 BC to 3500 BC). The flake is sub rectangular in shape, and triangular in cross section. A ridge runs the length of the dorsal (upper) surface. The remains of conchoidal ripples are present on the ventral (lower) surface. Controlled retouch is present along the lower edge and can be classified as short, parallel, semi-abrupt. It measures 30.2 mm in length, 11.8 mm wide and 3.0 mm thick. It weighs 1.1 g. The flint is an mid brown translucent colour, with no surface patination present.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A5E1BB
Object type: SIEVE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Tapering fragment of the distal end of the handle socket of a medieval to post-medieval sheet copper alloy skimmer with two sheet rivets and a central channel (Margeson 1993, 118-9, nos. 743-5; Egan 1998, 155-7, nos. 438-9). c.35 x c.29mm. Mid 15th - 17th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A5D44B
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Three medieval West Wiltshire ware body sherds. Two sherds have mid to light gret fabric with flint, greensand and mica inclusions, there are also recesses in the sherds suggesting chalk inclusions. The third sherd has flint inclusions and recesses suggesting larger chalk inclusions. The sherds are similar in fabric to examples from Crockerton. The combined weight is 29.06 grams.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A5C727

Record ID: WMID-A5C727
Object type: BORER
Broad period: NEOLITHIC
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete probable borer of probable Late Neolithic dating (2700 BC to 2200 BC). The probable borer has been made from a dark grey flint, with no patination. Less than 50% of the surface is covered by cortex, indicating that the probable borer has been made from a secondary debitage flake. The probable borer is a pointed oval in shape. The dorsal (upper) surface exhibits controlled working, with minimal retouch (long, scaled, low angle) along the working edge. The ventral (lower) surface exhibits a bulb of percussion and a conchoidal ripples. It measures 46.1 mm in length, 28.1 mm w…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A5C05A
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Fifteen medieval West Wiltshire ware sherds consisting of twelve body sherds, one rim sherd and two base sherds. The sherds have a light oxidised fabric some with a reduced core with flint, greensand and mica inclusions, there are also recesses in the sherds suggesting chalk inclusions. The findspot location suggests these sherds were produced at Crockerton. The combined weight is 144 grams.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-A5BC7E

Record ID: NMS-A5BC7E
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Worn and corroded copper alloy Roman nummus. Unknown emperor and mint but probably of the House of Valentinian. Further details illegible. Circa 364-378 AD.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A5AA40
Object type: THIMBLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval or post-medieval copper alloy tailor's thimble or sewing ring with an engraved line around the base below a continuous spiral of closely-set rectangular indentations. Diameter 18mm. Height 10mm. 16th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A5A842
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Seven medieval West Wiltshire ware sherds consisting of one body sherd and five rim sherds. The sherds have a light oxidised fabric some with a reduced core with flint, greensand and mica inclusions, there are also recesses in the sherds suggesting chalk inclusions. The findspot location suggests these sherds were produced at Crockerton. The combined weight is 79.61 grams.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A5950A

Record ID: KENT-A5950A
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver Groat of Henry IV (AD 1399-1413). Minted in London c. AD 1412-1213. Light coinage, Type 3 (N 1359b)
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-A590C5

Record ID: PUBLIC-A590C5
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy sub-rectangular shoe buckle. The object is drilled for a separate spindle with iron corrosion remaining within the drilled holes. The sides are decorated with scrolled knops which also occur either side of the spindle holes. The strap bar and pin are missing. Similar examples can be found in Whitehead no. 637 onwards and have been dated about AD 1690 - 1800. Also see LVPL-9757E6. Length 41.04mm, Width 27.25mm in the centre and 28.65mm at both ends, Height 8.08mm Thickness 2.75mm Weight 6.40gms
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A589DB
Object type: BELL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a medieval to post-medieval sheet copper alloy composite rumbler bell, a badly distorted fragment of the upper half with a separate suspension loop. On the inner face the inserted ends of the loop are entirely covered by a patch of lead solder. The dimensions of the main body are not measurable. The strip forming the partly squashed loop is 7mm wide. Bells of this type appeared in the late 13th century (Egan and Pritchard 1991, 338) and continued into the 17th (Egan 2005, 57).
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-A588DF
Object type: VESSEL
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Twenty one medieval West Wiltshire ware sherds consisting of seventeen body sherds, two rim sherds and two base sherds. The sherds have a light oxidised fabric some with a reduced core with flint, greensand and mica inclusions, there are also recesses in the sherds suggesting chalk inclusions. One base sherd has sooting visible on the outer edge. The findspot location suggests these sherds were produced at Crockerton. The combined weight is 367 grams.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A57AB9

Record ID: WMID-A57AB9
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete thumbnail scraper of Late Neolithic to Early Bronze Age dating (2700 BC to 1600 BC). The scraper has been made from a dark grey flint, with some patination present. No cortex is present. The scraper is sub circular in shape, with a triangular cross section. The dorsal (upper) surface exhibits controlled working, with minimal retouch (short, scaled, abrupt) along the working edge. The ventral (lower) surface exhibits a bulb of percussion and a striking platform. It measures 19.8 mm in length, 20.6 mm wide and 8.6 mm thick. It weighs 3.5 g.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A5482F
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy possible hooked strap fitting, perhaps of type related to Read 2008, no. 829. tapering plate with broken transverse element at the broad end, break across narrowed end. Extant length 35mm. Width 16.5mm. 17th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A546FA

Record ID: KENT-A546FA
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A silver penny of John of Avesnes, count of Hainaut, minted at Mons (present-day Belgium), dating c .1290-1300. The coin is a Continental imitation of the longcross coinage of Edward of England. See Mayhew, Sterling imitations of Edwardian type, no. 34.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-A53678

Record ID: NMS-A53678
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Worn and corroded copper alloy rose farthing of Charles I. Further details illegible. Circa 1636-1644 AD
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A53362
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton, Lion of St. Mark type, either anonymous or one of the early Schultes masters, c.1500-1584
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A531DA
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval strap plate comprising two approximately rectangular copper alloy sheets secured with three rivets. There is an off-centre round hole in one sheet only. Length and width 26 and 14mm. Mid 14th - mid 15th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WILT-A52738

Record ID: WILT-A52738
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A lead medieval personal seal matrix dating to the period c. AD 1200 - 1440. The seal matrix is circular in shape and rectangular in plan with a bevelled outer edge. The obverse exhibits a central design of a crescent with a palm? above. The central design is surrounded by an inscription probably reading * S'RIC'DIDEFERN[...]. The reverse exhibits a longitudinal ridge which thickens at one end to form a handle which is broken at the loop. The lead has a buff patina with traces of dark grey showing through in places. The seal matrix measures 24.2mm diameter, 5.65mm thick and weighs 9.…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A50A78
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut farthing of uncertain king, Henry II to Henry III, short cross type, moneyer and mint uncertain, 1180-1247
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-A4E9CF

Record ID: WMID-A4E9CF
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy sestertius of Hadrian (AD 117 - AD 138), dating to the period AD 119 to AD 121 (Reece Period 6). MONETA AVGVSTI S C reverse type depicting Moneta standing left, holding scales and cornucopiae. Mint of Rome. Cf. RIC II, p. 415, no. 578a. Diameter: 34.8 mm Thickness: 4.2 mm Weight: 21.3 g
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A4DE35
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Henry III, short cross class 7b, moneyer Tomas of Canterbury, clipping has removed roughly the upper half of the legends, 1222-36
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A4D896
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy double-looped buckle frame, both loops rectangular, with an incomplete strip pin on the round-sectioned bar. One edge and the adjacent parts of the sides are missing. Estimated length 38mm. Width 40.4mm. The extant edge carries baluster mouldings, cf. Whitehead 2003, no. 477 and Fingerlin 1971, Abb. 44. The former is dated to c.1450 - c.1600 and the latter to the mid 13th century. Perhaps the 15th century is more likely.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-A4CA5C

Record ID: NMS-A4CA5C
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Worn and corroded copper alloy nummus of the House of Constantine. Reverse; [GLORIA EXERCITVS], two soldiers holding two standards. Further details illegible. Reece period 17. Circa 330-335 AD
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A4B891

Record ID: KENT-A4B891
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval silver Threepense of Elizabeth I ( AD 1558-1603). Dated 1575, Eglantine mint mark. North Number 1998.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A4A1FE
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy sestertius of Commodus, Rome, reverse female standing left, further details illegible, AD180-92
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A494DF
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman coin, probably a sestertius, heavily corroded and utterly illegible, c.AD98-260
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A49411
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Front part of a medieval gilt copper alloy rectangular buckle plate broken at the fold, with a pin slot, frame recesses, gently concave sides, three rivet holes including two with convex-headed rivets and circular roves, and, along both sides and edges, lines of finely executed interrupted rocker-arm engraving giving the appearance of tiny addorsed triangles. Length and width 36.3 and 20.5mm. 13th - 14th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A48A2D
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy sestertius, probably Antonine, utterly illegible, c.AD98-192
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A47CB7
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman coin, illegible but size suggests a 4th century nummus, c.AD310-88
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A45E88
Object type: STRAP END
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Part of a medieval copper alloy composite strap-end. Circular spacer with elongated biconical stylised acorn knop and two forked projections, one bent. Filing and traces of solder on both faces. Front and back-plates missing. Length 48mm. Width 15mm. Thickness 2mm, knop 3.5mm. See Egan and Pritchard (2002, 141, fig.92, no.650). 14th - 15th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A44547
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy oval buckle frame with an offset, narrowed bar, convex outside edge and a strip pin with a darker green patination and a pair of transverse grooves next to the loop. One speck of gilding remains. Cf. Egan and Pritchard 1991, nos. 271, 274 and 277. Length and width 12.5 and 20.4mm. 13th - 14th century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A43BA1

Record ID: KENT-A43BA1
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival silver long cross penny, probably of Edward I (1272-1307). Minted in London. Uncertain class, probably class 10.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-A43BAC

Record ID: PUBLIC-A43BAC
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: York
Workflow stage: Awaiting validation Find awaiting validation
A cast lead alloy probable Spindle Whorl of Coppergate Type B1 possibly of the Iron Age or Roman period, dating from 800 BC - AD 410. Size: diameter 27.30mm, aperture 4.10mm, Weight 37.5mm and Thickness 7.51mm. The whorl is flat and discoidal. The side walls are flattened in places. The aperture is slightly 'off centre' and has a raised rim on one side. Walton Rogers (2007), page 25, notes that this shape of whorl originates in the Iron Age, though it's use continues through to the Post medieval period. However, there is some suggestion that a central aperture of 4-8mm is more common i…
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-A410BC
Object type: BROOCH
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Late Iron Age to Early Roman copper alloy Langton Down brooch, with the pin, part of the spring, parts of the spring casing and the lower part of the bow and the catchplate missing. There is a pair of transverse grooves on the top of the housing. A pair of curving grooves marks the top of the bow and below it there is a pair of median grooves. The bow tapers downwards to the break. Its front is slightly convex and its rear almost flat. Mackreth 2011, LD 9. Extant length 24mm. Bow width 12.8 - 4.8mm. Early to mid 1st century.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-A3F3F4

Record ID: NMS-A3F3F4
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a silver sixpence of Charles I. Group A, Tower mint. Date missing due to break. Approximately 40% of the coin survives. Circa 1625-1626 AD.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of KENT-A3972B

Record ID: KENT-A3972B
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival silver long cross penny, probably of Edward I (1272-1307). Minted in London. Uncertain class, probably 10ab.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-A3460D

Record ID: PUBLIC-A3460D
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: York
Workflow stage: Awaiting validation Find awaiting validation
Cast Lead alloy Spindle Whorl of probable Early Medieval to Post Medieval date, perhaps AD 500 onwards. It is small in size measuring 18.77mm diameter with an aperture diameter of 7.9mm. Weight 17.3mm, thickness 8.3mm. The whorl is of Coppergate form A2 (Walton Rogers (2007), page 25), having two flat faces of unequal size. The side walls are flattened in places and are only angled very slightly. It has been difficult to find a comparable example but SWYOR-64F403 and NLM-E377E7 looks similar in shape but not size.
Created on: Monday 6th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-919201

Record ID: NMS-919201
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Cast lead alloy Post Medieval bi-face token. The token is discoidal in shape, cast in a mould where the two halves have not been concentric. One face has the clear initial H and the other an irresolvable design. Powell type 2. Circa 1550-1850 AD.
Created on: Sunday 5th July 2015
Last updated: Sunday 5th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-90E5BC

Record ID: NMS-90E5BC
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete copper alloy Medieval to Post Medieval buckle. Only one end survives with the frame sides, strap bar and pin all missing. D-shaped section with flat back. The centre of the outer frame is expanded into a symmetrical arc and is flanked on either side by an oblique double collar. A similar end frame style is illustrated in Whitehead R. Buckles 1250-1800 (2003); 25, 117. Circa 1450-1550 AD.
Created on: Sunday 5th July 2015
Last updated: Sunday 5th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-902C47

Record ID: NMS-902C47
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of William I (lion) of Scotland. Phase B (class 2), posthumous issue. Circa 1205-1230 AD.
Created on: Sunday 5th July 2015
Last updated: Sunday 5th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-8F9CE9
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Worn and corroded copper alloy nummus of the House of Valentinian. Reverse; [GLORIA ROMANORVM], emperor with standard dragging captive to right. Further details illegible. Reece period 19. Circa 364-378 AD.
Created on: Sunday 5th July 2015
Last updated: Sunday 5th July 2015
Spatial data recorded.


  • Thumbnail image of NMS-8F4078

Record ID: NMS-8F4078
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of the House of Constantine. Obverse; helmeted bust facing left, [VRBS ROMA]. Reverse; wolf and twins.​ Reece period 17. Circa 330-335 AD.
Created on: Sunday 5th July 2015
Last updated: Sunday 5th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-80AADE
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval lead two-part circular cloth seal, diameter 16.5mm. - // a horse passant to dexter. the upper and left-hand parts of the impression are absent, with most of the image appearing only on the rivet. Cf. NMS-602847. Late 16th - early 18th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-808173
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of the upper part of a post-medieval copper alloy crotal bell with the stumps of a non-drilled loop. Diameter c.40mm. 17th - 18th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-806CB5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy oval buckle frame with offset, narrowed bar and convex outside edge. Cf. Egan and Pritchard 1991, no. 274. Length and width 11.7 and 15.1mm. Late 13th - 14th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-8055EE
Object type: RIVET
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy rivet, with globular head and bent and partly split shank. Probably from a harness pendant or mount, or buckle plate. No gilding remains. Head diameter 5.3mm. Length 14mm. 12th - 14th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-8031BD
Object type: ARROWHEAD
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval iron socketed arrowhead, the proximal end of the socket, the tip, most of one wing and part of the other missing. It is unlikely that there were barbs. The form may have been closest to Ward Perkins 1940, Type 3, though the true length of the socket is not known. What remains of it narrows towards the blade. Extant length and width 60mm (of which the socket accounts for 24mm) and 20mm. Thickness 8.5mm. Perhaps 13th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7F706E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Very heavily iron-stained and incomplete medieval copper alloy, probably lyre-shaped, buckle or strap-end. A trapezoidal socket with two rivet holes (a sheet backplate is missing). Very little of the rest of the object has survived. There is a suggestion of a pin hole and therefore identification as a buckle is more likely. No decoration is visible. For lyre-shaped buckles see Fingerlin 1971, 169, and NLM-C8CBD0 and many other examples on this database. For lyre-shaped strap-ends see ibid., 165 and SF-F906E5, again with many other examples. Extant length and width 31.3 and 21mm. Late 1…
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7F256E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle, an oval frame with an offset, narrowed bar protruding slightly at the sides, a convex outside edge, and a strip pin. Length and width 15.3 and 23.8mm. 13th - 14th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7F0AEA
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval buckle with only part of the bar of the frame surviving, within the fold of the sheet plate in which there is a pin hole and one rivet near the convex inside edge. Length 26.8mm. Width 18.9mm. 14th - 15th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7EE9C1
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Distorted post-medieval tin-coated copper alloy buckle, a double-looped frame, both loops trapezoidal, with a small lobe at the ends of the bar, and a D-sectioned pin. Cf. Whitehead 2003, no. 506. Length and width 27.5 and 19.8mm. c.1570 - c.1700.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7ECC04
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy button with an integral drilled loop: biconical, hollow openwork head with a small central nipple and six triangular perforations on the front face, and with six perforations on the rear face. Comparable with Baart et al. 1977, 185, no.235, Margeson 1993, 20-2, fig. 11 no.102 and Read 2005, 30, no. 93. Diameter 10.5mm. Length 16.5mm. 16th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7EB776
Object type: HARNESS MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval tin-coated copper alloy quatrefoil harness mount with the stumps of a pair of integral ovoid-sectioned attachment spikes on the reverse. Cf. Read 2001, nos. 278-9. 14 x 13.9mm. 17th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7EA509
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy hooked book clasp with two rivets and a central notch at the expanded terminal, a hole in the centre of a punched ring and the remains of an iron probable spring on the reverse. One corner near the hook is missing. Length 31.5mm. Width 15.8 - 17.2mm. 16th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7E66A7
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval discoidal 4-ounce avoirdupois lead trade weight stamped on the front face with the arms of Norwich, a crowned I and four small Xs. On the reverse there are several randomly distributed lines of rocker-arm engraving and a knife-cut gash. The crowned I (with a short cross bar at mid point) is the royal cipher of James I (1603-25) or James II (1685-8). Diameter 42.5mm. Thickness 7.5mm. Weight 108.35g / 3.8215oz.
Created on: Saturday 4th July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7E25F8
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy crotal bell with a non-drilled loop. Most of the lower half is missing. Diameter 31mm. 17th - 18th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7DF6DF
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two post-medieval copper alloy crotal bells, 17th - 18th century: - with non-drilled loop, iron pea, worn engraved decoration on lower half, maker's initials WG on one side of the cleft and a bell founder's hammer on the other, height 38.8mm, diameter 30.3mm. - fragment, central part with rib only, diameter 31.1mm.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7DCF3B
Object type: ROWEL SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a post-medieval copper alloy rowel spur, comprising small and distorted parts of the D-sectioned sides, the neck and part of the rowel box. A engraved line follows the top edge of the exterior of the sides, and the neck is flanked by pairs of oblique engraved grooves. Around the neck there are two broad moulded grooves and two narrow engraved. Width or height at junction of sides 12mm. Neck length 12mm. 17th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7D8D91
Object type: PURSE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval to post-medieval copper alloy purse bar of Ward Perkins 1940, Type B6 (without central loop). Length 77.5mm. Height at boss 18mm. c.1500 - c.1570.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7D6F77
Object type: THIMBLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy domed thimble, abraded and with most of the dome missing. Above a plain band around the base the sides are covered with vertical lines of small, round indentations. On what remains of the dome two horizontal rings of the same are visible. Diameter 19mm. Extant height 20.8mm. 14th - mid 15th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7BCD23
Object type: ROOF TILE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Four fragments of medieval ceramic roof tiles, all hard fired in a variety of colours and fabrics, one with part of a probably sub-square peg hole, thicknesses 12.5 - 14.5mm, weight 103g, mid 13th - 15th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7BA564
Object type: ROOF TILE
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Roman ceramic roof tile, an imbrex, thickness at edge 17mm, weight 62g, mid 1st - 4th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7B9019
Object type: TILE
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Five fragments of a Roman ceramic tile, one 27mm thick, the others with one extant face only, weight 396g, mid 1st - 4th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7B7DFA
Object type: FLUE TILE
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Roman ceramic combed box flue tile, thickness 18mm, weight 171g, mid 1st - 4th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7B6824
Object type: POT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Three sherds of Roman pottery, greyware body, very hard body with pale bluish grey core, off-white margins and pale brown surfaces, and micaceous greyware strap handle, weight 41g.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7B3A34
Object type: POT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Eight sherds of local medieval unglazed pottery, body apart from two basal, both probably Grimston products, one sagging and the other of uncertain form and from a large vessel, weight 92g, 12th - 14th century
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7B0FE9
Object type: POT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two body or basal sherds of Late Saxon to medieval pottery, perhaps Early Medieval Sandwich ware (Jennings 1981, 23-5) but micaceous, weight 31g, 11th - 12th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-7AF553
Object type: POT
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two sherds of Late Saxon Thetford-type ware pottery, jar rim and body, weight 11g, mid 9th - 11th century.
Created on: Saturday 4th July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6B8A27
Object type: POT
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
One hundred and fifty-three sherds of Middle Saxon pottery, body unless otherwise stated, weight 2.546kg: One hundred and forty-nine sherds of Ipswich ware in the full "spectrum" of fabrics of fine sandy to coarse gritty / pimply (Blinkhorn 2012, 9) including nineteen basal and seventeen jar rim. One sherd is stamped with at least three annular impressions, one complete, diameter 4.5mm, the others truncated by a break. The impressions were made with an 'opportunist' die (ibid., 56). On another sherd there are two parallel and gently curving grooves, with both ends interrupted by brea…
Created on: Friday 3rd July 2015
Last updated: Saturday 4th July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-6AC519

Record ID: FAKL-6AC519
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint blade with retouched notches(short, scaled, abrupt) on both edges. These notches (three on one side and two on the other) are cut through the recortication showing them to have been added to a blade, with a low bulb of percussion, produced at an earlier date. The flint is opaque, mixed grey with an area of cortex at one end. The reuse of an existing flint 'found' flint is a feature of Late Neolithic and Bronze Age lithics. . Length 68mm, Width 25mm, Thickness 9mm, Mass 12.47g.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-6A8BDE

Record ID: FAKL-6A8BDE
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Lithic implement combining a scraper and a denticulate blade made on a piece of poor quality, opaqued, mixed white and grey flint with a small area of original cortex at one end. This suggests that the blade, with a low bulb of percussion, had been struck from a flint cobble. Retouch (short, scaled, semi-abrupt) at one end forms a scraper. Coarse teeth were produced along one side using short, scaled, abrupt, retouch. This object is difficult to date but its poor qualitiy suggest that it is late, probably Late Neolithic or Bronze Age. . Length 63mm, Width 31mm, Thickness 12.5mm, Mass 30.30g.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-6A3662

Record ID: FAKL-6A3662
Object type: SCRAPER (TOOL)
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint flake with a retouched notch on one side (retouch, short, scaled, semi-abrupt). Low bulb of percussion, some original cortex is present suggesting the implement was made from a cobble, there is no recortication and the flint is mid-grey with white patches and opaque. Probably Mesolithic. Length 48mm, Width 33mm, Thickness 9mm, Mass 8.56g.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6A2D1F
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle, an annular sub-circular-sectioned frame and a cast pin with a rectangular boss or grip near the loop, faintly engraved with transverse grooves. A commonly occurring type, e.g. pins from London (Egan and Pritchard 1991, nos. 440-50), and complete examples from Wells Cathedral (Rodwell 2001, 520, fig. 512 nos. 1 and 2), Meols (Egan, G. in Griffiths et al. 2007, 85, pl. 13, nos. 430 and 432) and York (Ottaway and Rogers 2002, 2886, fig. 1465, nos. 12880 and 14294). External and internal diameters 35 and 29mm. Pin length 41mm. 14th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-6A235E

Record ID: FAKL-6A235E
Object type: SCRAPER (TOOL)
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint blade with a retouched notch on one side (retouch, short, scaled, semi-abrupt). The blade has low bulb of percussion and there are signs of platform preparation. Some original cortex is present, there is no recortication and the flint is mid-grey, opaque. Probably Mesolithic. Length 65mm, Width 30mm, Thickness 14mm, Mass 28.08g.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6A0A48
Object type: CHAFING DISH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Lower part of a medieval to post-medieval copper alloy inverted heart-shaped loop handle of a chafing dish or cupboard door, similar in form and size to an example from Norwich (Margeson 1993, 78-80, fig. 45 no. 491). Estimated width 54mm. Thickness 4mm. c.1400 - c.1600.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6A08BA
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver farthing of Edward I, class 3de, London, North 1053/2, 1280-1
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-69F86B

Record ID: FAKL-69F86B
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: East Sussex
Workflow stage: Published Find published
Probable barb and tang arrowhead, Early Bronze Age, blade leaf shaped but with three facets on its broader end suggesting the presence of a tang and two barbs. Bifacial retouch, (covering, scaled, low angle). No recorticated. Some recent damage resulting in the loss of the barbs, tang and the arrowhead's point. Flint, mixed, light brown, translucent. Length 30mm, Width 21mm, Thickness 4.2mm, Mass 3.25g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-69F234
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy buckle, a double-looped frame, both loops trapezoidal, with a D-sectioned pin. Cf. Whitehead 2003, no. 464. Length and width 35.8 and 24.3mm. c.1570 - c.1700.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-69EDAB
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of John, short cross mid class 6, moneyer Roger of Canterbury, c.1213-16
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-69CB73
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
About one half of a post-medieval copper alloy crotal bell with a non-drilled loop and apparently no decoration. Diameter 34mm. Height 44mm. 17th - 18th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-69C3AC

Record ID: FAKL-69C3AC
Object type: LEAF ARROWHEAD
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Leaf arrowhead, Neolithic, narrow with bifacial retouch, (covering, scaled, low angle). Recorticated all over. Some recent damage to the base of the arrowhead and one side showing the flint to be opaque, mid brown. Length 48mm, Width 18mm, Thickness 4.4mm, Mass 3.74g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-69ADA7
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Broken fragment of a silver penny of Henry III, short cross class 7c, moneyer Nichole of London or Canterbury, 1236-42
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-69A036

Record ID: FAKL-69A036
Object type: CORE
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint core, conical with two striking platforms producing narrow blades. Area of thick cortex on one side but no recortication, flint opaque, dark brown. An Early Mesolithic or Early Neolithic date seems likely. Length 26mm, Width 25mm, Height 31mm, Mass 28.12g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6993DC
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward I or II, class 10cf, London, North 1040ff, c.1305-10
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-697AC7

Record ID: FAKL-697AC7
Object type: CORE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint core, shaped like a cut diamond with striking carried out off a single face and around the sides to produce blade-like flakes. No cortex present and no recortication, flint opaque, dark brown. Some indications of platform preparation. An Early Neolithic date seem likely. Length 34mm, Width 29mm, Height 22mm, Mass 28.12g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-697042
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver threepence of Elizabeth I, Tower, eglantine initial mark, North 1998, 1575
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-695478
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver threepence of Elizabeth I, Tower, plain cross initial mark, North 1998, 1578
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-694568
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Charles I, Tower, initial mark and further details illegible, 1625-49
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-692A37

Record ID: FAKL-692A37
Object type: CORE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint core, wedge shaped with striking carried out off a single face to produce blade-like flakes. Some cortex present suggesting that the core was made from a cobble. No recortication, flint opaque, dark brown. Some indications of platform preparation. An Early Neolithic date seem likely. Length 34mm, Width 27mm, Height 33mm, Mass 34.84g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-691F34

Record ID: WAW-691F34
Object type: GAMING PIECE
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Possible Early-Medieval (9th to 11th century) possible gaming piece: The lead piece is sub-circular which has a V-shaped notch at the side. The surface of the piece has three irregular turrets, otherwise the surface was undulating. The base of the piece seems to have a second piece of lead which was joined by a black substance which is visible on the upper surface. The surface has traces of an incomplete light brown patina, otherwise it has an oxidised cream surface. It measures 22.8mm length, 21.99mm wide, 9.63mm thick, and weighs 16.35g There are Early Medieval gaming pieces which a…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of DENO-691BD2

Record ID: DENO-691BD2
Object type: SWORD
Broad period: POST MEDIEVAL
County: City of Nottingham
Workflow stage: Awaiting validation Find awaiting validation
An incomplete iron post-medieval (AD c.1600-c.2000) Indian khanda-hilted 'Firangi' sword, missing most of its blade and fragments of its handguard. Overall, the sword measures c.390mm long, 115.9mm wide and 76.7mm thick. It weighs 661g. The sword's hilt is a khanda hilt or an Indian basket hilt. The khanda is an Indian broadsword with a blunt point commonly used from perhaps as early as AD 320 to the present day. Firangi swords are swords that use a European style of blade (manufactured in Europe or imitated locally) and an Indian hilt. Firangi means foreigner. Firangi swords were fir…
Created on: Friday 3rd July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of WAW-68C86C

Record ID: WAW-68C86C
Object type: GAMING PIECE
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Possible Early-Medieval (9th to 11th century) possible gaming piece: The lead or lead alloy piece is conical in form with a circular perforation (6.27mm diameter) running the length of the object. Equi-distant around the exterior are four vertical linear ridges as decoration. Between each ridge there is possibly a slight high-relief pellet, but it is unsure due to corrosion. The base of the piece is oval. The tip of the conical has a 'V' shape slot, forming a 'V in profile. The exterior surface has an incomplete dark grey/brown patina and it has a patch of iron corrosion adhereing to i…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6896CC
Object type: WEIGHT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Very roughly discoidal medieval to post-medieval lead weight possibly for 8oz avoirdupois, of variable thickness and with one slightly concave face. There are several U-sectioned grooves randomly disposed on the sides. Diameter 40 - 45mm. Thickness 16 - 19mm. Weight 217g / 3349 grains (8 ounces = 3500 grains). If avoirdupois then post c.1300. Probably antedating c.1600.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-685DE6

Record ID: WAW-685DE6
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval to Medieval (10th to 15th century) mount or chape: The copper alloy mount is a sub-triangle, with one long edge having a fragment of an integral lip forming a right-angle in profile. It is possible this side edge is damaged and missing the lip along its length. The tip of the mount is missing and this break is possibly recent. The lower edge of the mount is possibly broken, but this is not certain. Along this edge there were two complete rivet holes which are filled with the remains of iron rivets which have corroded on the reverse, forming a mass of iron corrosion along…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-685617
Object type: LEASH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
One half a medieval copper alloy swivel from a leash, a ring with an aperture through a flattened collar, within which lies the conical ended shank broken off from the missing counterpart (male) ring. !5.7 x 14.8mm. 12th - 15th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-683742

Record ID: YORYM-683742
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early post medieval dress hook made of copper alloy. This is a Read Class E, Type 3. The attachment loop is formed by a trapezoidal loop at the top of the head. The circular shaped plate is domed and features a moulded relief decoration showing a five-petalled double rose. This object is broken across where the hook should attach to the bottom of the plate. The break is worn. The attachment loop is D shaped in cross section. The reverse of the plate is concave. This is more apparent in its upper half than the lower half. Read (2008) states that these objects are cast. A …
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-682965
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Entirely illegible Nuremberg jetton, diameter 27mm. c.1500 - c.1635.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-681DC6

Record ID: YORYM-681DC6
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete early post medieval dress hook made of copper alloy. This is Read Class E, Type 3. The attachment loop is formed by a rectangular loop at the top of the head. The circular shaped plate features relief and open work decoration showing an equal-armed cross with a central pellet, and open work decoration in the quarters, all within a linear circle. The hook is backward pointing and tapers to a sharp point. The plate and the hook are D shaped in cross section. The reverse of the plate is flat and undecorated. Read states that these objects are cast (2008). There is no visual ev…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-6806DA

Record ID: YORYM-6806DA
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete early post medieval dress hook made of copper alloy. This is a read Class E, Type 4. A trapezoidal loop at the top of the head forms the attachment loop. The diamond shaped plate features relief and openwork decoration showing a fleur-de-lis bordered by beaded and engrailed edges. The hook is backward pointing and tapers to a sharp point. The plate and the hook are D shaped in cross section. The reverse of the plate is flat and undecorated. Read states that these objects are cast (2008). There is a remnant of the casting flash inside the loop. The plate is distorted. On th…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-67CF63
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Early Neolithic hard hammer struck small blade of patinated buff brown flint with fine use wear or retouch to both lateral edges. 38 x 13 x 5mm. Field GL
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-67AEA7
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two Neolithic to Bronze Age secondary retouched flakes of unpatinated mottled grey flint: - hard hammer struck, with a partial thermal fracture extant on the ventral face. The distal end is broken by a transverse bending fracture and one side is steeply retouched to form a slight notch. 50 x 33 x 8mm. - soft hammer struck, with steep retouch to the distal end forming a steep angled piercer or boring tool. 43 x 24 x 8 mm. Field HON2
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-67AC9D

Record ID: FAKL-67AC9D
Object type: CORE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint core, roughly conical but worked from multiple angles to produce blade-like flakes. Some cortex present suggesting that the core was made from a cobble. No recortication, flint opaque, dark brown. Some indications of platform preparation. An Early Neolithic date seem likely. Length 57mm, Width 39mm, Height 39mm, Mass 75.23g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6797EA
Object type: FABRICATOR
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Neolithic to Bronze Age hard hammer struck thick tertiary flake of unpatinated glossy brown flint of good quality. Both lateral edges and the distal end of the flake are steeply and irregularly retouched on both ventral and dorsal faces. Possibly used as a fabricator. 67 x 32 x 13mm. Field FLO17
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-678955

Record ID: FAKL-678955
Object type: CORE
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint core, pyramidical, but with flakes also removed from the upper, convex surface. The products of this core were blades rmoved from multiple striking platforms. No cortex present, light recortication. the flint was opaque, dark grey. Probably Mesolithic. Length 47mm, Width 36mm, Height 34mm , Mass 41.66g
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: WAW-6751C1
Object type: SHOT
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Six Post Medieval 16th to 19th century musket or pistol shots: The lead balls are sub-spherical with no sprue trimming scars or casting seams. They have a mid grey/cream patina and measure: 14.41mm diameter, and weighs 15.99g. 14.31mm diameter, and weighs 16.68g. 14.18mm diameter, and weighs 17.33g. 14.27mm diameter, and weighs 17.05g. 12.94mm diameter, and weighs 10.72g and has a flattened side due to an impact. 10.45mm diameter, and weighs 5.76g. Ball shot was the prime form of small arms projectile used from the very late Medieval Period to middle of the 19th century. However…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-66FF99

Record ID: YORYM-66FF99
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete early post medieval dress hook made of copper alloy. This is a Read Class E, Type 3. A rectangular loop at the top of the head forms the attachment loop. The plate features relief and openwork decoration which is very worn. Comparison to better preserved examples shows that the decoration comprises a chequered lozenge with loops of open work decoration above and an engrailed edge below. At the junction of the plate and the hook there a ridged collar. The hook is backward pointing and tapers to a sharp point. The plate and the hook are D shaped in cross section. The reverse…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-66FF57

Record ID: WAW-66FF57
Object type: CANNON BALL
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval (late 15th to 17th century) cannon ball: It is a cast iron sphere and is 51.63mm diameter. It weighs 494g (1.09lb). The surface of the ball is corroded and appears to be stable. The cannon ball is probably used in a Falconet cannon based on the weight and diameter of the ball. This cannon is the smallest of the cannons developed in the late 15th century and continued in use into the 17th century https://en.wikipedia.org/wiki/Falconet_(cannon).
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-66EBC9

Record ID: KENT-66EBC9
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival silver long cross penny, probably of Edward I (1272-1307). Minted in Canterbury. Uncertain class, probably 10ab.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-66E836

Record ID: YORYM-66E836
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early post medieval dress hook made of copper alloy. This is a Read Class E, Type 5 with a trefoil shape head featuring a central circular plate surrounded by a trefoil of rounded loops. The central plate is partly obscured by corrosion but appears to be undecorated. A straight bar running across the top of the head forms a trapezoidal attachment loop. It is attached to the rest of the plate by two arms, each decorated with a pellet. At the junction of the plate and the hook there are two transverse ridges. The hook is backward pointing. However it is broken at the point…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-66E7EF
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy crotal bell with a non-drilled loop and engraved decoration, radial lines on the upper half, gadroon ornament on the lower half, much of which is missing, and a barely discernible bell founder's hammer within a five-sided cell on one side of the cleft. Height 40mm. Diameter 32mm. 17th - 18th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-66C8C5

Record ID: YORYM-66C8C5
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early post medieval dress hook made of copper alloy. This is a Read Class E, Type 5 with a trefoil shape head featuring an open work knot design. A straight bar running across the top of the head forms a trapezoidal attachment loop. Each running end of the cord which forms the knot design terminates with a pellet that could be a crude attempt at a rose. The plate is D shaped in cross section, the reverse being flat and undecorated. Read states that these objects are cast (2008). There is no visual evidence of cast manufacturing on this object. The object is broken acros…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-66AD9C

Record ID: KENT-66AD9C
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival silver long cross penny, probably of Edward I (1272-1307). Minted in London. Uncertain class, probably 10ab.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of YORYM-66A20D

Record ID: YORYM-66A20D
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early post medieval dress hook made of copper alloy. This is a Read Class E, Type 5 with a trefoil shape head featuring an open work knot design. A straight bar running across the top of the head forms a trapezoidal attachment loop. Each running end of the cord which forms the knot design terminates with a pellet. The plate is D shaped in cross section, the reverse being flat and undecorated. Read states that these objects are cast (2008). There is no visual evidence of cast manufacturing on this object. The object is broken at the junction between the plate and the ho…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-669939
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin weight for a German goldgulden, square and biface, one side with orb in tressure, the other with a hand flanked by 8_O and R_I with a V below, unknown Antwerp maker, weight 3.15g, late 16th/early 17th century
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-668053

Record ID: WAW-668053
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Possible Early Medieval (11th century) stirrup strap mount: The copper alloy mount is sub-trapezoidal in plan, with the lower, most narrow edge, being broken, but not recently. The mount is decorated with openwork, there is a sub-oval perforations towards each corner, and a further much smaller perforation in the centre of the side edges. Between these two perforations there is a rivet hole with the remains of a possible iron rivet. Along the upper edge there are three bulbous knops; one in each corner and a larger one in the centre. The reverse of the mount is undecorated and is hollo…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-666EFF

Record ID: KENT-666EFF
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross penny, probably of Edward I. Minted in London. Unusual obverse legend, EDWR'AGL DNS R hYB. Possible contempory copy. c. AD1279-1489.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of LIN-666619

Record ID: LIN-666619
Object type: STATUE
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Roman copper-alloy life-sized statue of a horse. This is an additional fragment that belongs to the assemblage found in 2010, and which is recorded as LIN-31B698.The fragment is sub-rectangular, having been 'torn' on all sides. All edges are irregular. The front of the fragment is undecorated, but has a series of scratches, most of which run vertically across the surface as shown in the image. In the top right corner is an incomplete recessed rectangular panel. This panel would have contained a sheet repair. The reverse of the fragment is irregular and contains the remain…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-6644D1

Record ID: KENT-6644D1
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver penny of Edward III (AD 1327-1377). Minted in York. Pre-treaty series G type c. AD1356-1361. North Number 1211.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-66410A

Record ID: WAW-66410A
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) stirrup strap mount: The copper alloy mount is sub-rectangle in plan, with the upper edge being broken, but not recently. The mount is decorated with openwork, there are two larger sub-circular perforations along the lower edge. Between these perforations there is a irregular bulbous mound. Above this mound there are two smaller circular perforations that a closer to the centre. Above these perforations there is a single irregular oval perforation with high-relief decoration either side which appears to be possibly a zoomorphic head. In one upper corner th…
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-663D2E
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Torn fragment of a copper alloy jetton of Hans Schultes III, Nuremberg rose-orb type, obverse [...]LCZET VND[...], reverse HANS SCHV[...], 1608-12
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6618B6
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton of Hans Krauwinckel II, small Nuremberg rose-orb type, reverse GOTT ALLEIN DIE EER ESEI, Mitchiner 11529, 1586-1635
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-66146C
Object type: RING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two abraded medieval to post-medieval copper alloy rings of irregular cross-section, possibly used in the suspension of drapes (Egan 1998, 62-4), mid 14th - 16th century: - distorted, external diameter 27.8mm, internal diameter 21mm, thickness 1.6mm. - external diameter 22mm, internal diameter 16mm, thickness 1.4mm. A small spiked internal projection is a casting flaw and a larger straight-sided external one is evidence for manufacture in a multiple mould.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-660906
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton of Hans Lauffer I, small Nuremberg rose-orb type, obverse GOTES GABEN SOL MAN L, Mitchiner 1685 (same dies), wide squareish central piercing, 1607-32
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-65F81E

Record ID: KENT-65F81E
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver penny of Edward III (AD 1327-1377). Minted at London. Pre-treaty series G, c. AD1356-1361. North Number 1206.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-65F5A6
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton, probably of Hans Krauwinckel II, small Nuremberg rose-orb type, reverse GOTTES GABEN SOL MAN LOB, cf Mitchiner 1537ff, 1586-1635
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-65C0D1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of Richard Langley of Ramsgate, Williamson 452, weight 0.78g, 1657
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-65A2BB
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy harness pendant, circular, flat, with several specks of gilding and apparently undecorated. Height 22.5mm. Width 15.7mm. 12th - 13th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-659E3B
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rfarthing of James I, uncertain initial mark and further details illegible, 1614-25
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6586B9
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, uncertain initial mark, North 2291, 1636-44
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6580C3
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, crescent initial mark, North 2291, 1636-44
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6579EE
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, crescent initial mark, North 2291, 1636-44
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6572C1
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Irregularly shaped lump of solidified molten copper alloy with uneven and pitted surfaces. Length 92mm. Width c.34mm. Weight 128.47g. Date unknown but probable ancient.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-656DE5
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, crescent initial mark, North 2291, 1636-44
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-65560B
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy pin double-looped buckle frame, both loops oval and both edges angled. The form is close to that of an example from a later 14th-century context in London, which is much larger and has a pin constriction (Egan and Pritchard 1991, no. 334). Length and width 54.5 and 45.6mm. c.1350 - c.1450.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of NMS-6554F9

Record ID: NMS-6554F9
Object type: INGOT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy ingot almost certainly producing by hammering out a sestertius or other large Roman aes issue and then chopping off an edge section. The resulting ingot would be suitable for further cutting (and hammering) in order to produce blanks for issues of so-called barbarous radiates. The slanted chisel mark is clearly visible on the straight edge. Length 35mm, maximum width 8mm, maximum thickness approx. 2mm, weight 4.17g, made approximately AD270-86
Created on: Friday 3rd July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6554C7
Object type: BELL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of probable bell, heavily cast body sherd, smooth exterior with radial step, rough interior, no surviving original edge, some sooting on granular breaks. Diam. c. 100mm. Thickness 9mm-11.5mm at step. Weighs 124.29g. 14th-18th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of LIN-653ED4

Record ID: LIN-653ED4
Object type: COIN
Broad period: IRON AGE
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Iron Age siler unit, North Eastern type attributed to the Corieltavi. The coin is an uninscribed boar-horse type, similar to Hobbs (1996) no. 3213. Diameter 12mm.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-6525A3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy pin from a medieval annular buckle. A grip or boss near the loop carries a three transverse filed grooves. The sub-rectangular sectioned shank is gently convex on its top face and hollowed on the underside near the tip. There is a casting flaw, a blowhole, next to the grip. Cf. Egan and Pritchard 1991, nos. 540-50. Length 48.1mm. Width 3.7mm. 14th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of LIN-65120E

Record ID: LIN-65120E
Object type: COIN
Broad period: IRON AGE
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Iron Age gold stater, North Eastern 'Ferriby' type attributed to the Corieltavi. Hobbs 1996, no. 3152ff.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of LIN-64D60C

Record ID: LIN-64D60C
Object type: COIN
Broad period: IRON AGE
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Iron Age gold stater, North Eastern 'Ferriby' type attributed to the Corieltavi. Hobbs 1996, no. 3152ff.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-64C11C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy buckle with an oval frame and composite rigid plate. On the outside edge there is a grooved lip. The forked spacer and the sheet plates taper to the staight inside edge. The pin and the ends of the sheet plates near the frame are missing. Of the same type but smaller than Egan and Pritchard 1991, nos. 322-30. Length 47mm. Width of frame 14.8mm. Width of plate 10 - 8mm. 14th - mid 15th century.
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of FASAM-638757

Record ID: FASAM-638757
Object type: COIN
Broad period: MEDIEVAL
County: Devon
Workflow stage: Published Find published
Gold Quarter-Florin or Helm of Edward III (1327-77), struck at London in 1344. North, vol II, p. 46, no. 1107; Spink 1478
Created on: Friday 3rd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-599241

Record ID: WAW-599241
Object type: SWORD
Broad period: BRONZE AGE
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Probable Bronze Age (-1000 to -800) blade fragment: The copper alloy blade fragment is sub-rectangular with both terminals being broken, but not recently as the patina covers the break. One break is slightly upturned, which suggests the blade may have been bent to break it. In section the blade is an elongated, sub-pointed oval with the edges being slightly chamfered. There is no obvious mid rib on either face. The surface of the blade has a traces of a dark brown patina, otherwise the surface is heavily pitted. It measures 40.5mm long, 17.76mm wide, 2.82mm thick. It weighs 9.76 grams.…
Created on: Thursday 2nd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-592644

Record ID: WAW-592644
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval coin: sixpence of Charles I (1625-1649) minted in, probably, London between AD 1625 and 1649.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-55FE32

Record ID: SWYOR-55FE32
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy simple D shaped buckle which is probably Medieval, dating from AD 1350 - 1500. It has an expanded outer edge with a notch for the pin rest. The pin is missing. It has a smooth grey green patin and may have been tinned. It is 46.6mm wide, 34.2mm long, 3.2mm thick. 12.22g. Compare numbers 263 and 264 on page 69 of Dress Accessories (Egan and Pritchard, 1991) and number 39 on page 18 of Whitehead.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-55DC8B

Record ID: SWYOR-55DC8B
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy late Iron Age or Roman penannular brooch of Fowler's Type A dating from 300 BC - 400 AD. It has a circular sectioned hoop and globular terminals without collars. The pin is missing and the frame is distorted. Sally Worrell writes "Types A-C are known from Iron Age contexts but they are difficult to date closely as many types were in use for a long period of time" in the PAS Roman and Iron Age Training notes (unpublished). The brooch has a smooth blue green patina. It is 30.6mm long, 34.4mm wide and 3.8mm thick. 2.58g.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-55DC3A

Record ID: WAW-55DC3A
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Roman (1st to 4th century) lead and iron steelyard weight: The cast weight is an asymmetrical bi-conical in profile and has a circular section. The upper apex of the weight has an incomplete iron loop. The surface of the weight is a smooth cream colour. It weighs 357g and is 47.57mm long and 42.09mm in diameter. Barford, Blockley and Day (1984) illustrate a similar shaped weight dating to the Roman period, as does Allason-Jones and Miket (1984; Nos. 8.46 and 8.47). Allason-Jones, L. and Miket, R., 1984 Catalogue of Small Finds From South Shields Roman Fort Gloucester: Society of Anti…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-55C5BF
Object type: POT
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Sagging basal sherd of a Late Saxon Thetford-type pottery storage jar, with a sub-triangular sectioned cordon applied to the outer face for stabilisation, probably a Grimston product, weight 131g, 11th century.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-55B6B3

Record ID: SUR-55B6B3
Object type: PIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A large and heavy possible pin of uncertain precise purpose, with traces of gilding. The pin has a rectangular head with an oval aperture. The tapering shaft has a rectangular section.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-55A61B

Record ID: SWYOR-55A61B
Object type: CLASP
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, cast copper alloy, single loop composite buckle with integral forked spacer, dating from the Medieval period, about AD 1325 - 1500. The frame is a rounded oval and the upper side is bevelled. There is a small, pointed knop in the centre of the outer edge. The two sheet buckle plates and the pin are missing. The buckle has a smooth, dark brown patina. It is 33.8mm long, 14.7mm wide, 3.3mm thick. 2.9g. For reference, see Meols, page 93. A similar example is illustrated in Whitehead, 2003, Buckles 1250 - 1800, page 36, number 214. See also Egan and Pritchard, page 78 ff.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-55A2AD

Record ID: SUR-55A2AD
Object type: PIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A large and heavy gilded pin, now bent, possibly for a large buckle of medieval date. The pin is gilded and has a circular section and a circular pennanular attachment loop. Halfway along the shaft is an integral projecting head with devolved zoomorphic features; eyes, ears and snout are clear. The precise date and purpose of this pin are uncertain.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-558AA7

Record ID: SWYOR-558AA7
Object type: CLASP
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy folding strap clasp dating from the Medieval period, about AD 1250 - 1450. The frame is slightly trapezoid, and the plate end is narrower than the rotating end. The bar on round which the plate attached is integral to the frame, but the bar at the rotating end is separate, held in a hole at each side of the frame. The plate is a folded piece of sheet making a sub rectangular plate which tapers away from the frame. It is recessed round the bar and has a single rivet hole near the far end. Some of the back plate is missing. The rotating end is decorated with three incised …
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-558275

Record ID: WAW-558275
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: A copper alloy sesterius or as possibly of Septimus Severus (AD 193-211) dating to the period AD 193 and 211 (Reece Period 10), reverse not visible, probably minted in Rome.
Created on: Thursday 2nd July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-55732A

Record ID: FAKL-55732A
Object type: HAMMERSTONE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Small hammerstone made from a roughly spherical flint core used for the production of narrow flakes and worked from multiple directions A small area of the original cortex survives, the surface is lightly recorticated the flint appears to have been opaque grey. Substantial areas of the nodule show the results of battering, the surface being covered with rough, hackly fractures. These objects are difficult to date but an early Neolithic date could be suggested for the core. Diameter 56 x 48mm, Height 48mm, Mass 182.3g
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-5568DB
Object type: POT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two sherds of Roman pottery, a greyware storage jar body with two impressed wavy lines (weight 89g) and a red-slipped Oxfordshire-type basal with a foot-ring (weight 28g). 2nd - 4th century,
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-556410
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy radiate of Gallienus, Rome, reverse [...]S AVG, figure standing left, further details illegible, AD260-8
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-5557DB

Record ID: SWYOR-5557DB
Object type: MOUNT
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy mount of Medieval date, about AD 1200 - 1500. It is shaped like a fleur de lis and is finely moulded with beading across the base and open circles within the two lower feathers. There are two empty rivet holes, one in the centra feather and on in the tails of the three feathers. The front is moulded and the reverse is flat. The mount has a smooth bright green patina. It is almost identical to number 1084 on page 201 of Dress Accessories (Egan and Pritchard 1991), which unfortunately is unphased, and SWYOR-EF00A2. The mount is 15.3mm long, 10.2mm wide and 1.8mm thick. 0.6g.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-555543
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Irregular copper alloy radiate of uncertain Gallic emperor, probably Tetricus I, reverse figure standing holding sceptre, diameter 16mm, c.AD275-86
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-555264

Record ID: FAKL-555264
Object type: HAMMERSTONE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Large hammerstone made from a flint nodule, roughly spherical. Some original cortex survives but recortication covers the surface making description of the flint impossible. Substantial areas of the nodule show the results of battering, the surface being covered with rough, hackly fractures. These objects are difficult to date but, if as seems likely, it came from Iford Hill, a prehistoric date seems likley. Diameter 66 x 56mm, Height 60mm, Mass 300.3g
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-5542C1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Irregular copper alloy nummus of Magnentius or Decentius, reverse Two Victories holding shield, diameter 13.5mm, c.AD353-64
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-553243
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Valentinian, Lyon, reverse SECVRITAS REIPVBLICAE type, mintmark OF/[..]//[..]VG[..], AD367-75
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-5526F1

Record ID: SWYOR-5526F1
Object type: MOUNT
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy belt or strap mount of Post-Medieval date, AD 1600 - 1700. The lower part of the body is in the form of a fleur de lis, there is then a narrow waist before the upper part of the body which is in the shape of an oval (or heart) with a rounded and blunted upper knop. The front surface of the mount carries moulded decoration within a raised border. This is somewhat corroded but in the upper body it appears to be a pair of crescents or scrolls with the outline of the feathers indiscated on the fleur. The reverse of the mount is flat and carries two mounting spikes, both…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-552268

Record ID: FAKL-552268
Object type: HAMMERSTONE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Large hammerstone made from a flint nodule, probably a fossil sponge, roughly spherical with a small projection, with a central hole representing its attachment to the sea bed. Much of the original cortex survives but in a damaged area an opaque, mixed grey flint can be seen. Recortication is light. Substantial areas of the nodule show the results of battering, the surface being covered with rough, hackly fractures. Hammerstones are difficult to date but, if as seems likely, it came from Iford Hill, a prehistoric date seems likley. Diameter 92mm, Height 97mm, Mass 904.1g
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-5520A4
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Valens, Siscia, reverse SECVRITAS REIPVBLICAE type, mintmark R over looped A//F//?ASISCV, AD367-75
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-551431
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Valentinian I, Siscia, reverse GLORIA ROMANORVM type, mintmark F/R over looped A//BSISC[pellet]?, AD367-75
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-54FA7B
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a copper alloy nummus, House of Constantine, Arles or Trier, CONSTANTINOPOLIS Victory on prow type, mintmark [wreath]/-//[...], AD330-5
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-54EDDC
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, reverse GLORIA EXERCITVS 1 standard type, mintmark and further details illegible, AD335-41
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-54E3C4
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constantine II, Trier, reverse GLORIA EXERCITVS 2 standard type, mintmark TR.P, AD330-5
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-54D679
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constantine II, Lyon, reverse GLORIA EXERCITVS 2 standard type, mintmark [..]PLG, AD330-5
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-54C922
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, reverse GLORIA EXERCITVS 1 standard type, mintmark [christogram]//[...], AD335-41
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-54C567

Record ID: WMID-54C567
Object type: PLANO CONVEX KNIFE
Broad period: BRONZE AGE
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete plano convex or 'slug' knife, of Late Neolithic to Early Bronze Age dating (3300 BC to 1200 BC) The knife has been made from a secondary flake of light grey, semi translucent flint. The lower face (ventral) exhibits some rippling. The upper face (dorsal) exhibits retouch along both edges (covering, sub-parallel, semi-abrupt). It measures 56.4 mm in length, 34.0 mm wide and 6.8 mm thick. It weighs 11.6 g.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-54B456

Record ID: SWYOR-54B456
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman brooch; a rectangular plate brooch probably dating from the 2nd century AD. The brooch is a flat rectangle with an incised line border along the long edges. In the centre is a raised pointed oval shape which is triangular in section. This may be related to vulva or "coffee bean" designs known on other Roman objects, but differs in the central line projecting rather than being indented. It may also be intended to represent a Roman shield. There are traces of silvering on the plate and on the raised motif. One corner of the plate is missing. On the reverse, the thr…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-5493FB

Record ID: SUR-5493FB
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A 16th century hooked tag comprising a rectilinear openwork design of trefoils and arches.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-54885D
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, reverse VICTORIAE DD AVGG Q NN type, mintmark [..]//SL[G], AD341-8
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-54802F

Record ID: SUR-54802F
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A 16th century hooked tag comprising a heart-shaped plate which contains a central bearded mask. The mask sits within a circular border of pellets. The hook itself is missing.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-547453

Record ID: SWYOR-547453
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman button and loop fastener dating form the 2nd century AD. It is a Wild's Class VI because it has a rectangular head, but rather than being plain or enamelled, it is decorated with an incised line border along each long edge, and a pair of similar lines longitudinally across the button, which is wider than it is tall (14.9mm by 11.8mm and 2.3mm thick). The buttonis flat and rectangular in cross-section. The loop is integrally cast, triangular and has the characteristic 90 degree bend before joining the button in the centre of the reverse. The fastener has a smooth gr…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-547411
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, House of Constantine, reverse GLORIA EXERCITVS 1 standard type, mintmark and further details illegible, AD335-41
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-545DC9
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constans, Trier, reverse VICTORIAE DD AVGG Q NN type, mintmark D//TRP, AD341-8
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-545B3C

Record ID: WMID-545B3C
Object type: PLAQUE
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy plaque, of uncertain dating but probably Post Medieval (AD 1500 to AD 1800). All edges are incomplete. The plaque is sub square in shape. The front exhibits recessed decoration in a panel. The panel can be described from the outside edge in. It is separated from the rest of the mount by a plain rectangular border. Inside this, on the right side is a double row of square stamps, within a small rectangular border. To the left of this panel, is the main panel, with a rectangular border of a double row of smaller square stamps around a curvilinear design, with a…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-545483

Record ID: SUR-545483
Object type: FINGER RING
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy finger ring dating from the 15th or 16th centuries. The ring has a rectangular bezel with a deep empty rounded setting for the missing stone. Between hoop and bezel is a pair of collars.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-544E97

Record ID: SWYOR-544E97
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Medieval buckle (Meols Class 8) dating from AD 1250 - 1450. It is an oval frame with a recessed and offset bar, and an expanded outer edge divided into four lobes by the central grooved pin rest and two ridges. There are also incised lines across the edge flanking the ridges and the groove. The outer lobes are angled slightly. The pin and plate is missing. The buckle is 27.9mm wide, 22mm long, 3.4mm thick and 4.77g. See page 84 of Griffiths, Philpott and Egan, 2007.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-544923
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constantius II, Lyon, reverse FEL TEMP REPARATIO Falling horseman type, mintmark CPLG, AD355-61
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-543E09

Record ID: SUR-543E09
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy thimble dating from c1550-c1650. The thimble has ten horizontal tiers of pits on the side.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-542EE5

Record ID: SUR-542EE5
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy thimble dating from c1550-c1650. The thimble has nine possibly spiral tiers of large pits on the side.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-542202

Record ID: SUR-542202
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy thimble dating from c1550-c1650. The thimble has sixteen spiral tiers of pits on the side and a groove just below the rim.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-54017C

Record ID: SWYOR-54017C
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy Medieval spindle whorl dating from about AD 1200 - 1600. It is biconical with a thickened mediean ridge and a central aperture of 9.9mm internal diameter. It is decorated on both faces with raised radiating ribs and pellets in groups of two or three in each compartment. The whorl is 30.1mm diameter, 13.2mm thick and 38.56g. Spindle whorls are notoriously difficult to date, but examples decorated like this one are usually considered to be Medieval, lasting through to the adoption of the spinning wheel in the 16th.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-53FF5C

Record ID: KENT-53FF5C
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn Medeival silver long cross penny, Edward I or II. Minted in Durham. Uncertain class. c. AD 1272- 1327.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-53FE49

Record ID: WMID-53FE49
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An complete silver farthing, of uncertain ruler but of Late Medieval dating (AD 1377 to AD 1509). Obverse double struck. Mint of London. Diameter: 12.0 mm Thickness: 0.5 mm Weight: 0.2 g
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-53FAFA

Record ID: SUR-53FAFA
Object type: JETTON
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval English jetton of apparently previously unknown type. One side shows the Short Cross reverse which was current in the period c1180-c1247. The other side is a cross fleury which Mitchener suggests belongs to the late 13th to early 14th century. A date in the second half of the 13th century seems reasonable for this jetton.
Created on: Thursday 2nd July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-53F67B
Object type: POT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Rim sherd of a post-medieval Glazed Red Earthenware pottery storage jar, form as Jennings 1981, no. 1259 and applied fingernail impressed decoration as no. 1258, weight 62g, diameter not accurately measurable, c.1550 - c.1700.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-53E7EE
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Henry III, voided long cross class 5b2, moneyer Ion of Canterbury, c.1253
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-53DC3A

Record ID: SWYOR-53DC3A
Object type: WEIGHT
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy probable shield shaped weight dating from the Medieval or Post Medieval period, about AD 1350 - 1700. The weight is plano-convex and triangular with a rounded apex suggesting it is shield shaped. There is a raised design or mis-cast lump on the face. One corner is chipped and some of the surface is missing. At 18g exactly, it does not appear to fit neatly into the Averdupois sytem of weights, but could be considered as a 12 pennyweight in the Troy system (18.7g) allowing for the slight loss of metal (see page 302 in The Medieval Household, Egan 1998). The weight has a dark…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-53DA66

Record ID: KENT-53DA66
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn and mistruck Medeival silver long cross penny, probably of Edward I (1272-1307). Minted in London. Uncertain class, probably 10ab.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-53D7D1

Record ID: SUR-53D7D1
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A milia button belonging to the Loyal Greenwich (militia) and dating to c1795-C1805. The button has a silver coating and the reverse has no maker's details. The face reads: GR (for George Rex) which appears centrally in script; HONORE ET ARMIS within a crowned belt; LOYAL GREENWICH.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of PUBLIC-53C46C

Record ID: PUBLIC-53C46C
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A B1 type cast lead alloy spindle whorl of unknown date, probably early medieval to post medieval, about AD 400 - 1600. Central hole measuring 6.67mm in diameter. It is slightly elongated and measures 25.82mm x 27.33 in diameter and 4.92mm thick. Both sides have a stamped annulet design with 15 circles on one side and 16 circles on the other. One of the circles extends out of the edge. It weighs 19.3gms. The whorl has a white patina. No close comparisons have been found on the database. The classification is from Walton Rogers (2007), page 25.
Created on: Thursday 2nd July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of SUR-53B42E

Record ID: SUR-53B42E
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A plain medieval copper alloy strap loop, to hold down a belt or strap. The loop is rectangular and has an integral rivet. The upper face is wider than the remainder.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of KENT-53AA15

Record ID: KENT-53AA15
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival silver long cross penny of Edward I (1272-1307). Minted in London. Uncertain class, probably 1d-2b c. 1279-1280.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-539A49

Record ID: SUR-539A49
Object type: BUCKLE
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A plain medieval copper alloy oval buckle frame with a narrow offset bar and a wire pin. The frame has been gilded.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-53922C

Record ID: SWYOR-53922C
Object type: BUCKLE
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Medieval buckle dating from about AD 1300 - 1500. It is a single looped rectangular buckle, wider (across the strap) than it is long. The frame has a slightly expanded outer edge and a simple groove as a pin notch. The frame is bevelled on both faces. The pin is copper alloy and is of rectangular cross-section, stepping down in height from the loop to the pin. Both pin and frame have a dark brown patina. The buckle is similar to number 126 on page 26 of Whitehead. The buckle is 27.3mm wide, 20.4mm long, 7.9mm thick across the pin loop and 5.31g.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-538C44

Record ID: SUR-538C44
Object type: BUCKLE
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A plain medieval copper alloy annular buckle with a central dividing bar and a sheet metal pin.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-537D0D

Record ID: SUR-537D0D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval copper alloy folded buckle plate of very long and slender proportions. The attachment end, on the upper side, is decorated with a panel of diagonal hatching.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-537317

Record ID: SWYOR-537317
Object type: BULLA
Broad period: MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a lead papal bulla of Pope Eugene III (Pope from AD 1145 - 1153) or Eugene IV (Pope from AD 1431-1447). Only one third of the bulla survives. The obverse depicts the bust of St Paul within an inverted pear shaped compartment defined by pellets. St Paul's beard is portrayed as being long, straight and pointed, whilst his hair is straight and swept back. At the top of the bulla in the centre are the letters 'SP[ASPE]', abbreviations for St Paul and St Peter. The reverse of the bulla has the following letters over three lines. [EVG]EN/[IVS] PP/[•III]I• The PP means 'past…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-536A4F
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfpenny of Edward IV, London, clipped and further details illegible, 1461-83
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-535C7C

Record ID: SUR-535C7C
Object type: STRAP END
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval copper alloy strap end of composite construction. The strap end comprises two plates, a spacer and a single rivet. The strap end has a projecting terminal.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-535128
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Elizabeth I, Tower, woolpack initial mark, North 2016, 1594-6
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SUR-53463C

Record ID: SUR-53463C
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A post medieval copper alloy decorative strap mount with two broken spikes and a piece of leather on the reverse. The mount is dumb bell-shaped and is decorated with flower shapes made up with punched crescents, and with a decorative border of punched annulets.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-52A0A8

Record ID: FAKL-52A0A8
Object type: CORE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Large flint core, cylindrical and used for the production of broad flakes. Multiple striking platforms at at varied angles to each other. Some platform preparation has taken place. A small area area of original cortex survives suggesting that mined flint had been used. The core, while recorticated, has the blotchy appearance suggestive of the flint typical of this site. The form of this core and the nature of its products suggest that it is Early Neolithic date. Length 60mm, Width 53mm, Thickness 42mm, Mass 113.7g
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-527327

Record ID: FAKL-527327
Object type: CORE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Massive flint core, cylindrical and used for the production of of long, narrow, blades. Two striking platforms at 90 degrees to each other both apparently working from original faces of the nodule. One side of the core bears an area of original cortex suggesting that a flint cobble had been used. The core, while recorticated, has the blotchy appearance suggestive of the mixed colour flint typical of this site. The form of this core and the nature of its products suggest that it is Early Neolithic date. Length 54mm, Width 80mm, Thickness 71mm, Mass 363.0g
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-521687

Record ID: WMID-521687
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy symmetrical bar mount of Post Medieval dating (AD 1500 to AD 1600). The strap fitting consists of a oval plate, with a convex or domed top, with an integral attachment spike to the top and bottom. The front of the mount has been decorated with two horizontal lines, situated parallel to each other, located a third of the length in from either end. Small transverse diagonal grooves are present down the length, three in each section.The attachment spikes have a rectangular cross section and are incomplete, with the ends missing, presumed lost in antiquity. Each…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WAW-5215E7

Record ID: WAW-5215E7
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: silver denarius of Domitian (AD 81-96) dating to AD 86-87 (Reece period 4). IMP XII COS XII CENS PPP reverse depicting Minerva standing, holding a thunderbolt and spear. RIC Vol II, page 164, No. 86 or 93.
Created on: Thursday 2nd July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WMID-520C0D

Record ID: WMID-520C0D
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete vesica or pointed oval lead or lead alloy seal matrix, of the Medieval period, dating from c. AD 1300 to c. AD 1400. The matrix is vesica (pointed oval) shape in plan and rectangular in section The reverse has a raised rectangular ridge running the length of the object in the centre, from this are two diagonal lines that point down the object and meet at the central line forming a chevron shaped design, at the top are the remains of a suspension loop or tab handle. The front has a debased fleur de lys/lis as the central device, with an inscription around the outside. There …
Created on: Thursday 2nd July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of WAW-51F252

Record ID: WAW-51F252
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: copper alloy sestertius of Hadrian (117-138 AD) minted between 125 and 128 AD. (Reece Period 6). The reverse is COS III depicting, probably, Diana standing right holding bow and arrow. Minted in Rome. RIC Vol. II, p423, No.631b
Created on: Thursday 2nd July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-51D56E
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval tinned copper alloy strap fitting, an S-shaped hook with dragon-head terminals and a moulded transverse band flanked by projecting laurel leaves at the centre. Length 32mm. Width 17.6mm. Thickness 4.8mm. Cf. Read 2008, 230, no. 822. c.1550-1625.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-5197B2

Record ID: WMID-5197B2
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy, Roman, complete, Nummus of Constantine I (AD 306 - AD 337), CAESARVM NOSTRORVM reverse type, depicting VOT X enclosed by a wreath, dating to the period AD 323 - AD 324 (Reece Period: 16). Mint: Trier. RIC Vol VII, page 202, no 430. Diameter: 17.9 mm Thickness: 2.02 mm Weight: 1.9 g
Created on: Thursday 2nd July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-5195D4
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Henry II, short cross class 1c, moneyer Raul of London, c.1185-9
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-518E19
Object type: THIMBLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Slightly distorted medieval cast copper alloy domed thimble, with a single circumferential groove above a plain band around the base and below a continuous spiral of round indentations covering all of the surface. Diameter 20mm. Height 19.2mm. 15th century
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-518327
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin weight, probably for a Spur ryal of James I, weight 5.71g, 1604-25
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-51786F
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin weight for a rose ryal of James I, 3rd coinage, weight 10.86g, 1619-25
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-515F8D
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of William Batch of Yarmouth, Williamson 294-6, c.1650-67
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-514C02
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of uncertain issue, one side possibly [..]EPHEN[...] encircling uncertain design, the other [...] encircling design with 'N' either at bottom left and so comprising the husband's initial or second letter of two and so comprising the initial of a man's surname, c.1650-70
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-514B81
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy spur buckle, complete but rather worn. At the junction of the oval frame and the integral plate and flanking the pin hole there is a slight projection on both sides. The strip pin is in a brighter green surfaced alloy. The elongated plate tapers past one rivet hole before widening around a second and terminating in a pointed knop (which is complete and not a truncated hook). Length 53.2mm. Width of frame 16mm. Width of plate 10.5 - 6.2mm.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of ESS-50B54C

Record ID: ESS-50B54C
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Essex
Workflow stage: Awaiting validation Find awaiting validation
A base fragment probablyfrom a Post Medieval cistern, dating AD 1500-1800. The ceramic is dark grey with no evidence of glaze or slip. There a fine quartz inclusions evenly distributed throughout.Traces of a circular perforation are found along one breakline, towards the base of the vessel. This would suggest it may have originally been a cistern. Due to the extensive damage to the vessel it is difficult to know for certain. Dimensions: height: 49.43 mm; width: 73.21 mm; thickness: 10.18 mm; weight: 64.56g.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-50B284
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy sestertius, Rome, probably Antonine, utterly illegible, c.AD138-260
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-509554
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Rearhook brooch, the pin, the spring, a small part of the outer ends of the wings, the foot of the bow and much the catchplate missing. The wings are decorated with an oblique groove, and the pointe oval-sectioned bow with a median rib between grooves and with a rib along both edges. Mackreth 2011, CD RH 4.a. Extant wingspan 17.6mm. Extant length 24.4mm. c.43 - c.65.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-508DC0
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Corroded copper alloy coin, probably originally a sestertius, utterly illegible, 1st-3rd century
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-506ABF
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Rearhook brooch, the pin, the spring, and most the catchplate missing. The wings are decorated with a rib at the outer ends and in the centre, and there is a median rib on the sub-triangular sectioned bow. Mackreth 2011, CD RH 3.c. Wingspan 25.9mm. Length 40.2mm. c.43 - c.65.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-50602D
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Elizabeth I, Tower, initial mark illegible, North 1987, 1558-61
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-5048AF
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Rearhook brooch, the pin, the spring, the lower part of the bow with the catchplate missing. The wings are decorated with bead and reel, the former with wavy lines, and there is a median groove on the sub-triangular sectioned bow. Mackreth 2011, CD RH 2.c. Wingspan 30.3mm. Extant length 33.7mm. c.43 - c.65.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-503C3E
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver shilling of Elizabeth I, Tower, initial mark A, North 2015, 1584
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-502623
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfcrown of Charles I, Tower, worn almost smooth and pierced centrally probably to allow the coin to circulate after William III's Recoinage of the late 1690s, weight 8.88g, 1625-49
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-500DD9

Record ID: WMID-500DD9
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
An incomplete copper alloy Trumpet style brooch, of Roman (75 to 175AD) dating. Approximately 50% of the brooch is present, with the pin, foot and spring missing, presumed lost in antiquity. The rest of the brooch is intact. The head of the brooch is oval in plan, and tapers into the bow. The reverse of the head is flat, with a integrally cast rectangular lug. There is no evidence of a head loop or plate. The bow of the brooch is D shaped in cross section. The head of the brooch tapers into the body. Halfway down the length of the bow, is an spherical moulding. Beneath the moulding, …
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-500C14
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Rearhook brooch, the pin, the spring, the outer ends of the wings and the fold of the solid catchplate missing. The decoration and form of the bow are very close to Mackreth 2011, pl. 40, no. 7668 (type 2.i), but at the top there is a group of transverse mouldings, a flute, grooves and two knurled ribs. On the wings a rocker-arn engraved bead lies next to a reel. Length 54.2mm. c.43 - c.65.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-500597
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman coin, probably originally a sestertius, completely illegible, 1st-3rd century
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-4FE97D

Record ID: WMID-4FE97D
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
An incomplete copper alloy Colchester derivative (Polden Hill) brooch of Roman date (AD 75 to AD 175). Approximately 50% of the brooch is present, with the spring, pin, foot and catchplate missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindral wings projecting from either side at the top. The remains of a rearward facing hook are is located at the back of the head. No decoration is present on the bow. A ridge is present at the shoulder between the wings and the bow. The back of t…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-4FB043
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Harlow brooch, the pin, and the lower part of the bow with the catchplate missing. The wings are plain and there is a rocker-arm engraved median rib on the D-sectioned bow. Mackreth 2011, Ha 1a. Wingspan 17.5mm. Extant length 17.5mm. c.43 - c.75.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-4F81C5
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Langton Down brooch, half of the spring, the pin, part of one wing and the lower end of the bow with the catchplate missing. The bow is plain with a median arris. Mackreth 2011, LD 8. Extant length 28.8mm. Mid 1st century.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-4F2FDB

Record ID: SWYOR-4F2FDB
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Part of a lead alloy Medieval flat seal matrix dating from about AD 1200 - 1400. About half survives. It was a pointed oval shaped with a central motif (probably a star) within a plain incised line border surrounded by a legend of large letters. They read: "[...]HANNIS A[...]" (Seal of John A[...]). A mark in the central field may be a letter h on its side, perhaps the last letter of the legend if the die cutter ran out of space. The reverse is decorated with a cast design of a fleur-de-lis. If there was a handle lug, it does not survive on this piece. The matrix is 19.9mm long, 21.1mm…
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-4EE7D2

Record ID: SWYOR-4EE7D2
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman coin; a radiate with traces of silvering of Probus dating from AD 276 - 282 (Reece Period 14). The reverse type is not clear but is probably two people standing, perhaps CLEMENTIA AVG depicting Probus recieving globe from Jupiter. Compare Sear Volume III, number 11960 on page 471. Mint unknown. The coin is chipped and the surface is corroded. It is 21.7mm diameter, 2mm thick and 2.07g.
Created on: Thursday 2nd July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of NMS-436B6C

Record ID: NMS-436B6C
Object type: BRACELET
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Corroded fragment of a possible late Iron Age to early Roman copper alloy 'beaded' bracelet or torc. The object is a dumbell shape with larger bulbous segments at either end, joined in the centre by a narrower waist. The terminal ends finish in old breaks. Similar fragment can be seen at LEIC-39C9C4 and WILT-0E2575. The poor survival precludes a more definitive identification. ​Circa 100BC- AD200.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-41327A

Record ID: NMS-41327A
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Iron Age Aucissa brooch. The forward rolled head has significant iron corrosion in the loop probably from the axis bar holding the remnant of the hinged pin. The deeply arched bow has a D-shaped section with a wide mid-rib flanked by moulded or die wrought flanges. Towards the foot the bow narrows and straightens to form the catchplate, the end of which is damaged and shows no evidence of an attached knop. Circa 75-25 BC (Mackreth vol1 p130).
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-40BC33

Record ID: SWYOR-40BC33
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Post Medieval cap-hook dating from AD 1500 - 1700. It has a sheet plate head which is triangular with a scalloped or notched edge and which is decorated with very fine punched or rouletted marks forming lines. The overall design is not clear. The plate has suffered damage and is bent. In the centre of the reverse is riveted (with a copper alloy rivet) a single S-shaped sharp wire hook. The riveted end is flattened, but the rest is circular in section and tapers to the point. The hook has a dark green patina. It is 25.1mm long, 16.8mm wide and 10.2mm thick. 3.4g. Compare…
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-409E69
Object type: VESSEL
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a handle of Roman translucent blue-green glass broken at both ends and longitudinally. The extant edge is concave and the front face is grooved. Probably from a bottle. Weight 5g. 2nd century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-406F5B

Record ID: SWYOR-406F5B
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman coin; a nummus probably of the House of Valentinian dating from AD 364 - 378 (Reece Period 19). Probably SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left holding wreath and palm. The coin is 17mm diameter, 1.3mm thick and 1.63. It is very worn.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-406140
Object type: POT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fifteen sherds of Roman pottery, weight 55g, mid 1st - 4th century, weight 325g: - two bowl rim Central Gaulish samian, form 27 Les Martres-de-Veyre, form 31 Lezoux, weight 36g. - thirteen greyware and reduced (perhaps Nar Valley) ware, two jar rim, one large platter rim, five basal, and five body, weight 289g.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-403855

Record ID: SWYOR-403855
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman coin; a nummus probably of Constans (AD 333 - 350) dating from AD 347 - 348 (Reece Period 17). VICTORAE DD AVGGQ NN reverse type depicting two Victories holding wreaths and facing each other. Mint of Arles. Compare number 457 on page 12 of LRBC. The coin is 14.1mm diameter, 1.1mm thick and 1.05g.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-401E1B
Object type: POT
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Four body sherds of Late Iron Age or Early Roman pottery, hand built, smoothed, three reduced with one or both surfaces oxidised, one oxidised with grey surfaces, weight 55g. 1st century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3FCE51
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Saxon to post-medieval sub-conical lead spindle whorl. Diameter 16mm. Height / thickness 8.5mm. Hole diameter 8mm. Weight 9.64g. 11th - 16th century
Created on: Wednesday 1st July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3FBD91
Object type: TAP
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete upper part of a post-medieval copper alloy tap key, a bifurcated handle only with its ends missing. In it complete state it would have been similar to an example from Norwich (Mareson 1993, no. 932). Extant length of handle 45mm. Thickness 9.2mm. 17th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3FBC24
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy buckle frame, angled double-oval, with a rounded lobe at each corner and at the ends of the narrowed central bar with flat-sectioned copper ally loop from missing pin. Cf. Whitehead 2003, no. 382. Length 36mm. Width 22.5mm. c.1550 - c.1650.
Created on: Wednesday 1st July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3FB77A

Record ID: WMID-3FB77A
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
An incomplete copper alloy Colchester derivative (Polden Hill) brooch of Roman date (AD 75 to AD 175). Approximately 50% of the brooch is present, with the spring, pin, foot and catchplate missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindral wings projecting from either side at the top. The back of the brooch is undecorated. A cylindrical groove is present behind the wings, this would have originally held the spring. Part of the clay casting core is visible on the reverse of th…
Created on: Wednesday 1st July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3FA514

Record ID: WMID-3FA514
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
An incomplete copper alloy Colchester derivative (Polden Hill) brooch of Roman date (AD 75 to AD 175). Approximately 50% of the brooch is present, with the spring, pin, foot missing and the catch plate incomplete. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindral wings projecting from either side at the top. The base of a rearward facing hook is present at the top of bow, this would have held part of the spring. A double vertical ridge is present on the bow as decoration. A ridge is …
Created on: Wednesday 1st July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3FA17A
Object type: SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy hooked spur leather attachment with lateral lobes, broken hook and rivet hole containing stud with heart-shaped head. Cf. Read 1995, nos. 807 and 1060. Length 24.5mm. Width 6mm. 17th century.
Created on: Wednesday 1st July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3F97A9
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval lead spindle whorl, biconical with relief decoration on both faces. Seven radial ribs divide groups of three to sevwen pellets. Diameter 30mm. Thickness 15mm. Hole diameter 10mm. Weight 47.47g. Similar to an example from Meols (Griffiths et al. 2007, no. 2188) and one from an early 16th-cent. context at the Augustinian Friary, Leicester, complete with its wooden spindle (Mellor and Pierce 1981, 139-40, fig.51 no.71). It is possible that the object was residual, but it is unlikely to have been very ancient when deposited in the context, in view of its completeness. 15th - early…
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-3F8DAD

Record ID: LIN-3F8DAD
Object type: SHOT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A post Medieval lead casting strip with three spherical shot (musket balls) still attached. The strip is flat and sub-rectangular with three projecting runs, each one of which terminats with a ball. Each ball measures circa 4.5mm in diameter. Once the lead was hardened the balls would have been clipped off and cleaned ready for use (e.g. Courtney 1988, 3; fig. 5). Although usually termed 'musket balls' the shot may have been used with other weapons and therefore the term lead shot is usually preferred. The shot has been dated c.1600-1800 in line with the basic usage period for this …
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-3F852B

Record ID: NMS-3F852B
Object type: COIN
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Henry VII. Obverse; Double arched crowned bust facing within eight-arched tressure, h[ENR]IC DI GRA[...]. Reverse; Long cross, inner circle with three pellets in each quarter. Inner legend CIVI/TAS/CAN/TOR, outer legend POSVI DEV ADIVTOR[...] Class IIIc. Initial mark tun. Canterbury mint. North 1712. Circa 1486-1504 AD.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3F622E

Record ID: WMID-3F622E
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver penny of Edward I (AD 1279 to AD 1307), dating to the period AD 1301 to AD 1305. Minted in London. Class 10ab. Diameter: 18.4 mm Thickness: 0.8 mm Weight: 0.9 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3F3969

Record ID: WMID-3F3969
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver threepence of Elizabeth I (AD 1558 to AD 1603), dating to the period AD 1562, issued as part of the second coinage between AD 1561 and AD 1582. Tower (London) mint. Mintmark: Pheon. North, vol 2, p 135, no 1998. Diameter: 19.3 mm Thickness: 0.8 mm Weight: 1.6 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3EF845
Object type: RING
Broad period: UNKNOWN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver ring of variably thick sub-circular cross-section and unknown date. External and internal diameters 13.5 and 10mm. Weight 1.24g.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-3ED6F8

Record ID: NMS-3ED6F8
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy unidentified object. The object is made of sheet that has been fashioned into a trefoil or trifid shape. The outside foils have raised circular bosses that are hollow on the reverse. The lower edge of the shape terminates in an old transverse break. No parallel could be found. Purpose is unknown but it could be vessel related. A Post Medieval date of 1500-1750 AD is suggested. Length 45.82mm, width 40.68mm and weight 8.7g.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3EBF23

Record ID: WMID-3EBF23
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver scottish twenty pence of Charles I (AD 1625 to AD 1649), dating to the period AD 1637 to AD 1642. Spink 5581-91A. Diameter: 15.2 mm Thickness: 0.5 mm Weight: 0.6 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3E9555

Record ID: WMID-3E9555
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver penny of Alexander III of Scotland (AD 1249 to AD 1286), dating to the period AD 1280 to AD 1286, issued as part of the second coinage. Mint uncertain. Probably Class Mc. Spink 5055. Diameter: 18.7 mm Thickness: 0.8 mm Weight: 0.8 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3E1C99
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy sword belt fitting, probably hooked and of the same type as Read 2008, nos. 813-7. At the top a rivet hole through a rounded lobe above a grooved collar is iron filled. Below the lobe a large dome is pierced by three holes, two iron filled. These must represent a phase or phases of repair. The lower part where a hook would be expected is missing. Extant height 40.5mm. Width 22.5mm. Thickness at dome 7.7mm. 17th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3DF468
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete hooked pendent plate from a post-medieval copper alloy sword belt hanger with two iron-filled rivet holes and engraved foliar decoration. The hook is missing. Very similar to Read 2001, no. 373 and Read 2008, no. 793. Extant height 38mm. Width 21.6mm. Mid 16th - 17th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3DD8D7
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy crotal bell with iron pea, non-drilled loop and engraved with gadroon decoration on the lower half, the maker's initials WG on one side of the cleft and a bell founder's hammer on the other. Diameter 31mm. Height 39.5mm. 17th - 18th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3DC476

Record ID: WMID-3DC476
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver penny of Edward I (AD 1279 to AD 1302), dating to the period AD 1279 to AD 1302, issued as part of the second coinage. Minted in Dublin. Spink 6246. Diameter: 19.7 mm Thickness: 0.7 mm Weight: 1.1 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3DC0AE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two medieval copper alloy annular buckle frames with a central bar, both very similar to Whitehead 2003, nos. 272-4, "in the form of a five petalled flower", with an engraved line following the edge on each petal but without multiple transverse lines, c.1450 - c.1540: - rust on the centre of the bar from an iron pin, length and width 32.8 and 31.4mm. - length and width 30.6 and 29.6mm.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3D95D4
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Foot and lower part of the leg of a medieval to post-medieval cast copper alloy cooking vessel. All the surfaces are sooted. The leg is rectangular sectioned (12.5 x 6.3mm at the break), and the footprint is trapezoidal, narrower at the heel (16.5 x 13 - 15.5mm). Weight 16.69g. 14th - 17th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-3D5FDB

Record ID: SWYOR-3D5FDB
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Rotherham
Workflow stage: Awaiting validation Find awaiting validation
A flint barbed and tanged arrowhead dating from the Beaker Period to the Middle Bronze Age, about 2400 BC - 1000 BC. The arrowhead is formed on light grey flint speckled with patina. It is triangular with rounded and tapering notches in the base to divide the barbs and tang. Both barbs are broken off and the breaks are patinated. The tang has an oblique terminal. The arrowhead has bifacial scaled, low angle retouch, covering on one face, but only at the edges on the reverse. It is 28.6mm long, 21.2mm wide and 4.4mm thick.1.81g.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3D32B8
Object type: THIMBLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two medieval cast copper alloy domed thimbles, both with a single circumferential groove just above the base and below a continuous spiral of round indentations, 15th century: - the spiral covers all of surface including the low dome. Height 18.8mm. Diameter 18.2mm. - single notch in the base, top of the dome left plain. Height 21mm. Diameter 19.3mm.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-3D024E

Record ID: SWYOR-3D024E
Object type: SPEAR
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Middle Bronze Age spear (spearhead) dating from about 1500 - 1150 BC. The spear has a very short and rounded leaf shaped blade, and two side loops on the socket. The blade of the spear apprears to be complete but it is unusually small at 37.4mm long and 24.6mm wide. The edge facets are about 3mm wide. The midrib continues to the very tip of the blade. It forms a pronounced rounded rib on each face. It can be described as conical, but is a little taller than it is wide. There is 17mm between the base of the blade and the side loops. These are quite flat and have expande…
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3CB7BA
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of uncertain issuer, probably Jeremy Vyn of Norwich represented by a new reverse die, obverse illegible, cf Williamson 212ff, 1657
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3C85AB
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of William Bratin of Great Yarmouth, Williamson 303, c.1650-67
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-3C71FB

Record ID: LANCUM-3C71FB
Object type: COIN
Broad period: IRON AGE
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Western silver unit of Anted (attributed to the Dobunni), c. AD 20-50. ABC (Cottam et al 2010) no. 2072. The diameter is 13mm and the weight 1.03g.
Created on: Wednesday 1st July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3C6187
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut farthing of Henry II, Tealby type, weight 0.39g, mint and moneyer illegible, perhaps York, c.1154-80
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3C5680
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut farthing of Henry II, Tealby type, weight 0.36g, mint and moneyer illegible, c.1154-80
Created on: Wednesday 1st July 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of NMS-3C4905

Record ID: NMS-3C4905
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Henry II, Tealby type, probably Bust D, North 958 or 959, weight 1.11g, mint and moneyer illegible, c.1165-8
Created on: Wednesday 1st July 2015
Last updated: Tuesday 7th July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-3C0808

Record ID: LANCUM-3C0808
Object type: COIN
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
The medieval coin is a penny of Edward III pre-treaty series C minted at Durham, date is 1351-2AD. N 1150. The diameter is 17mm and the weight 0.89g.
Created on: Wednesday 1st July 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-3C0344

Record ID: SWYOR-3C0344
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy Medieval flat seal matrix probably dating from AD 1200 - 1400. The die face is very flat and it seems likely that the matrix was never engraved with a design or legend. It was a pointed oval shape, but the edges are damaged at one end. The reverse appears to be plain apart from a central riased rib which had a pierced lug at one end, though this has broken off. The matrix is 29.8mm long, 19.6mm wide, 4.5mm thick and 12.64g. An uncut matrix suggests local manufacture or retail, the legend and motif being added at or after the time of purchase.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-3BEADC

Record ID: SWYOR-3BEADC
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
An incomplete lead alloy Medieval flat seal matrix probably dating from AD 1200 - 1400. Unfortunately, the matrix is scratched, bent and broken and none of the legend can be read. It was a pointed oval shaped with a central motif (perhaps a cross or fleur) within a plain incised line border surrounded by a legend. The letters look to have been large and crude, but none are legible. The reverse appears to be plain and any handle lug does not survive on this fragment. It is 21.8mm long, 20.1mm wide and 2.7mm thick. 6.15g.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-3B993D

Record ID: SWYOR-3B993D
Object type: TWEEZERS
Broad period: UNKNOWN
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a pair of sheet copper alloy tweezers probably dating from the Roman or Early Medieval periods, about AD 43 - 1066. The middle part of one arm survives. It flares along its length. It is decorated with an incised line border and five ring-and-dot motifs, three along the centre and two next to each other at the wider end. At the top, narrow, end are three incised transverse lines. The reverse is plain. The breaks are jagged but worn and patinated. The whole fragment is bent into a curve and there are stress marks cracking the metal. The tweezers have a smooth dark grey gre…
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3B7443

Record ID: WMID-3B7443
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy farthing of William III and Mary II (AD 1688 to AD 1694), dating to the period AD 1694. BRITANNIA reverse type depicting Britannia facing left. Spink 3453. Diameter: 21.8 mm Thickness: 1.3 mm Weight: 2.8 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-3B56F3

Record ID: SWYOR-3B56F3
Object type: COIN
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval silver penny of Elizabeth I (AD 1558-1603) dating from AD 1578 - 1580. Second issue. Initial mark: plain cross. Mint of London. North (1991, p135) no. 2001. It is 14.5mm diameter, 0.6mm thick and 0.58g. It is slightly double struck and is not very central on the flan.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3B4204

Record ID: WMID-3B4204
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
An incomplete copper alloy sestertius, probably of Faustina II under Marcus Aurelius (AD 161 to AD 175). Reverse type uncertain but depicts a female figure standing left, with left arm held outwards. Mint of Rome. Diameter: 29.5 mm Thickness: 4.6 mm Weight: 19.4 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WAW-3B3E73

Record ID: WAW-3B3E73
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Roman (AD c. 75 to 175) trumpet derivative brooch, Wroxeter type, in two pieces: The first fragment is the upper portion of the bow. The bow head, in plan, is sub-circular with an integral moulded plate along the upper edge. This plate has two scrolls which meet in the centre, and it is here there is a broken edge. The head is decorated with a horizontal bar with fine notches below the integral plate. The reverse of the bow head has two vertical, perforated lugs which support a copper alloy axis bar, around which the iron spring is wound, but due to corrosion it is not clear how many t…
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-3B27C6

Record ID: WMID-3B27C6
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
A copper alloy sestertius of uncertain Emperor, dating to the period AD 43-250. Reverse type uncertain but depicts a female figure standing left, holding cornucopiae in left, and right arm out. Probably Mint of Rome. Diameter: 27.9 mm Thickness: 4.2 mm Weight: 16.4 g
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-3AF745

Record ID: NMS-3AF745
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Post Medieval trade weight. The weight is circular in plan with a large concentric circular central recess forming a shallow cup. The sides are tapered and other than a single concentric circular groove there are no marks to verify weight or proof. The weight is 6.5g and is therefore close to ¼ ounce. Circa 18th-19th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3AA9D8
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy spur buckle with missing pin. The frame is oval. The integral plate is furnished with a pin hole, two rivets, and a grooved bulbous moulding between a waist and a sharply moulded fleur-de-lis at the inside edge. There is some engraved linear ornament on the fleur. Length 39mm. Width of frame 12.6mm, of plate 9.8mm. 13th - 14th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-3A8316
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy buckle. The oval frame survives only as an offset, narrowed bar and distorted stumps of the sides. The rectangular-sectioned pin lacks its tip. The probably trapezoidal sheet plate, with pin slot, frame recesses and two rivet holes, has lost the narrower outside edge and most of the front part. The small remaining part is decorated along the sides with lines of finely executed interrupted rocker-arm engraving giving the appearance of tiny addorsed triangles. Width of plate 13.7 - 11.5mm. 14th century.
Created on: Wednesday 1st July 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-2CB710
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Three medieval copper alloy strap fittings, bar-mounts with terminal and central lobes and a rivet hole countersunk at the rear in each of the latter: - with aperture in the central lobe, one terminal incomplete, rivets missing, very similar to Egan and Pritchard 1991, no. 1154, from a context dated c.1150 - c.1200, 8.8 x c.32.5mm. - small round aperture, four filed longitudinal grooves and five shallower transverse lines on the domed central lobe, 10.5 x 18.5mm, rivets present (lengths 3.8 and 4mm), form similar to ibid. no. 1161. 14th century. - similar to the above, but with five…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-2C1023
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval gilt copper alloy enamel inlaid harness pendant, a quatrefoil with a small part of the suspension loop missing. Most of the gilding and parts of the blue enamel have been lost. Blazon: Azure a Griffin passant Or The motif is very close to NMS-4C7911 and Ashley 2002, fig. 21, no. 202. Height 34.6mm. Width 27.2mm. 13th - 14th century.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-2BF70C

Record ID: YORYM-2BF70C
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A silver denarius of Domitian dating to the period AD 88 (Reece Period 4). COS XIIII LVD SAEC FEC reverse type depicting cippus in wreath. Mint of Rome. RIC II, p.167, no,115.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of SUR-2BDAF9

Record ID: SUR-2BDAF9
Object type: PENDANT
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A small Anglo-Scandinavian copper-alloy pendant in the form of a sinuous creature seen in side view. The head has a lip lappet, large eyes and prominent ears. The creature is curled into a double looped scroll with its nose touching its tail. There appear to be interlacing elements where the body crosses. The original nature of the attachment end is not clear but it may have been a suspension loop. The creature is in the Urnes style which was prevalent in England during the second half of the 11th century.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-2B6833

Record ID: LANCUM-2B6833
Object type: WEIGHT
Broad period: MEDIEVAL
County: Sunderland
Workflow stage: Awaiting validation Find awaiting validation
A possible sub spherical small spindle whorl probably Medieval. The slightly oval bead has a large central hole with straight sides. It could also have been used as a bead, form of weight; or perhaps a net-sinker or line weight. A similar example is BH-798332. The diameter is 12mm and the weight 8.06g.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NARC-2B60EA

Record ID: NARC-2B60EA
Object type: BROOCH
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
Report by Lyn Blackmore of MoLA with amendments by Julie Cassidy (Northamptonshire FLO) and Ben Paites (Essex FLO): Dimensions: Diameter 28.8mm, internal Diameter 19.6mm, Thickness 2.4mm; width of frame 5mm, Length of pin 30mm Complete silver annular brooch with beaded inner and outer edges. There is an inscription in Lombardic, or 'black', lettering on the upper side and a double axe motif on the reverse. The frame has a narrow recess for the sword-shaped pin, which would originally have been articulating but is now held in the tight slot for it by soil/corrosion. Due to the nature …
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-2B4F68

Record ID: LANCUM-2B4F68
Object type: WEIGHT
Broad period: MEDIEVAL
County: Sunderland
Workflow stage: Awaiting validation Find awaiting validation
A possible sub spherical small spindle whorl probably Medieval. The slightly oval bead has a large central hole with straight sides. It could also have been used as a bead, form of weight; or perhaps a net-sinker or line weight. A similar example is BH-798332. The diameter is 19mm and the weight 10.60g.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-2B1D67

Record ID: LANCUM-2B1D67
Object type: SPOON
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast lead alloy (pewter) possible spoon probably dating to 17th - 19th century ADF. Copper-alloy spoon fragment that consists of the rear portion of the shallow bowl, probably circular but could have been elliptical. Only the base of the stem remains and is hooked. Shares similarities with SOM-F59E70, BERK-C54B8A and GLO-A61CA5. The stem is rather odd as it appears to have a tab or hook suggesting that it is a component element of another object. If it is a rat-tail junction between the handle and bowl these developed after AD 1675 and were superseded around AD 1715 altho…
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-2B092E

Record ID: SWYOR-2B092E
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Published Find published
A contemporary copy of a gold solidus of Constantius II (AD 323-361), dating to c. AD 347-348 (Reece Period 17). Reverse prototype: VICTORIAE DD NN AVGG, Two Victories facing one another, holding between them wreath inscribed VOT/X/MVLT/XX. Prototype from mint of Trier. For type, see RIC VIII, p. 147, no. 132; Depeyrot, Les monnaies d'or de Constantin II a Zenon, p. 108, no. 6/3.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LEIC-2AFC37

Record ID: LEIC-2AFC37
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early medieval or Medieval copper alloy buckle, 25mm long, 19mm wide and 4mm wide with a weight of 5.69grams. The buckle is D shaped in form and in cross section with a slightly recessed straight strap bar. It has a in intact pin bar which is also D shaped in cross section and is wrapped around the strap bar.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-2ADA7B

Record ID: DUR-2ADA7B
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead spindle whorl of medieval to post-medieval date (AD 1200-1800). The spindle whorl is bi-conical with a central, sub-circular, perforation running through it. Both surfaces are decorated with repeating raised ridges radiating from the central perforation. Each resulting sub-triangular cell bears a single pellet. there is also an inner and outer raised boarder, both of which respect the form of the object. The metal is a mid-cream in colour with a smooth patina. Lead spindle whorls were commonly used from the Iron Age through to the post-medieval period and are diffi…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-2ACE99

Record ID: LEIC-2ACE99
Object type: BROOCH
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman silvered copper alloy bow brooch, 36mm long, 16mm wide and 8mm deep with a weight of 5.70grams. The brooch has largely intact open wings, missing the spring, which are silvered. It has a triangular corss sectioned bow, which forms a gently curving outer face that is decorated with two raised lines of rope like decoration, which merges together as it approaches the rounded stepped foot. The catchcplate is intact with a complete return running its length and emerges from the central ridge running down the inner face of the bow.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WMID-2AC11D

Record ID: WMID-2AC11D
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
A complete copper alloy sesterius of uncertain Antonine Emperor, probably Marcus Aurelius (AD 161-180). Reverse type uncertain but possibly depicts a standing male figure. Mint of Rome. Diameter: 30.0 mm Thickness: 4.6 mm Weight: 16.2 g
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of DUR-2AAA65

Record ID: DUR-2AAA65
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy cruciform brooch of Early-Medieval date (AD 450-600). The retained portion of the brooch is a spatulate zoomorphic stylized horse's head terminal. The terminal comprises small raised knops to represent the eyes of the beast from which the snout expands into flaring nostrils which as inverted comma shaped with circular bases. Extending out from between and either side of the nostrils is the projecting spatulate terminal with broken and worn edges. The reverse in undecorated and retains at its upper end a small linear projection which would have formed the catc…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-2AA2B9

Record ID: LEIC-2AA2B9
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver Edwardian penny, London Mint.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-2A94B6

Record ID: WMID-2A94B6
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Published Find published
A complete copper alloy sestertius of Marcus Aurelius (AD 161-180). Reverse depicts Fortuna seated left, holding rudder and cornucopiae. Mint of Rome. Diameter: 27.2 mm Thickness: 3.9 mm Weight: 13.6 g
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of DUR-2A7A16

Record ID: DUR-2A7A16
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
An incomplete, silver plated copper alloy, contemporary copy of a Roman denarius of Domitian AD 81-96 (Reece period 4). Reverse type depicts Minerva advancing left, brandishing javelin and holding shield. The coin is missing between 3-7 O'Clock.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-2A67D4

Record ID: WMID-2A67D4
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy dupondius or As of uncertain Emperor, but of 1st to 2nd Centuries AD dating. Reverse type uncertain but possibly depicts a standing female figure. Probably Mint of Rome. Diameter: 26.7 mm Thickness: 3.3 mm Weight: 10.0 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-2A65C6

Record ID: LEIC-2A65C6
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver halfpenny of Henry VII? mint unknown. 1485-1509
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-2A4AE8

Record ID: DUR-2A4AE8
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of Henry I (AD 1100-1135). Quadrilateral on cross fleury type. Uncertain mint and moneyer. (AD 1125-1135).
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-2A17F3

Record ID: LEIC-2A17F3
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver short cross penny, moneyer possibly EDWARD, minted in London.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-2A1754

Record ID: DUR-2A1754
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver penny of Edward II (AD 1307-1327). Class 13. Long cross with three pellets in each quadrant. Canterbury Mint. (AD 1315-1317).
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-2A0D0B

Record ID: WMID-2A0D0B
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 340 (Reece Period 17). VRBS ROMA reverse type depicting a she wolf suckling twins. Mint uncertain. Diameter: 14.8 mm Thickness: 2.0 mm Weight: 1.4 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-29FD03

Record ID: WMID-29FD03
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 340 (Reece Period 17). VRBS ROMA reverse type depicting a she wolf suckling twins. Mint of Trier. Diameter: 15.6 mm Thickness: 1.5 mm Weight: 1.1 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-29F2E7

Record ID: LEIC-29F2E7
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver farthing of Edward I, London mint, 1279-1307.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-29E9EB

Record ID: DUR-29E9EB
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver penny of Edward IV (AD 1461-1470). First reign. Long cross with three pellets in each quadrant. London Mint. (AD 1461-1470). The coin is missing its outer flan between 6-10 O'Clock.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-29C1A0

Record ID: WMID-29C1A0
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 335 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers and two standards. Mint uncertain. Diameter: 14.0 mm Thickness: 1.9 mm Weight: 1.1 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-29B96B

Record ID: DUR-29B96B
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver groat of Henry VIII (AD 1509-1547). Second coinage. Long cross over squared shield reverse. Arrow initial mark. London Mint. (AD 1532-1542). A small portion of the outer flan is missing between 10-11 O'clock.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-29B138

Record ID: WMID-29B138
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 335 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers and two standards. Mint uncertain. Diameter: 14.7 mm Thickness: 1.9 mm Weight: 1.2 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DENO-29B051

Record ID: DENO-29B051
Object type: VESSEL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A rim sherd from a Roman (AD c.43-c.402) vessel. The fabric is fairly soft, coarse and light brown in colour. There are frequent small brown and grey inclusions. The sherd is from a flange-rimmed vessel. Overall, the sherd measures 53.6mm long, 45.4mm wide and 15.0mm thick. It has a wall thickness of 7.4mm. It weighs 28.53g.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LEIC-29AE5A

Record ID: LEIC-29AE5A
Object type: COIN
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver commonwealth clipped halfpenny, 1649-60.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-29A2BE

Record ID: WMID-29A2BE
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 335 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers and two standards. Mint uncertain. Diameter: 14.3 mm Thickness: 1.8 mm Weight: 1.0 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-29944D

Record ID: WMID-29944D
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 335 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers and two standards. Mint uncertain. Diameter: 15.6 mm Thickness: 2.0 mm Weight: 1.4 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-299139
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver groat of Edward IV, London, Light coinage, quatrefoils by neck and extra pellet in one quarter of reverse, nothing on breast, Series Vc or Vd, North 1567 or 1568, 1464-5
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-29859B

Record ID: LIN-29859B
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper-alloy radiate of Postumus, struck AD259-68. Unclear reverse depicting a figure advancing left.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of DUR-2980EA

Record ID: DUR-2980EA
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver half groat of Elizabeth I (AD 1558-1603). Second issue. Long cross over squared shield reverse. Escalop Initial mark. London Mint. (AD1584-1587).
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-297475
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver farthing of Edward I or II, class 10-11, London, North 1070/1, c.1301-14
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-296B79

Record ID: LIN-296B79
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper-alloy radiate of Carausius, dating to the period AD286-93. PAX AVG reverse type depicting Pax standing left.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-296351

Record ID: WMID-296351
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 340 (Reece Period 17). CONSTANTINOPOLIS reverse type depicting Victory standing left on prow of galley. Mint uncertain. Diameter: 13.2 mm Thickness: 1.6 mm Weight: 0.5 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-296044
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An illegible late Roman copper alloy radiate, struck AD260-296.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-295F67
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy Trumpet brooch (Mackreth 2011 type TR). Single loop broken, pin and spring missing, sub-oval-sectioned bow with half-round moulding, broken before catch-plate. Extremely worn and bent. Surviving length 32mm. 1st - 2nd century.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-295327

Record ID: LIN-295327
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy radiate of Claudius II (268-70). Possibly PAX AVG reverse type depicting Pax standing left, holding a cornucopiae and possibly a branch.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-294AF9

Record ID: WMID-294AF9
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 340 (Reece Period 17). CONSTANTINOPOLIS reverse type depicting Victory standing left on prow of galley. Mint uncertain. Diameter: 14.3 mm Thickness: 1.9 mm Weight: 1.3 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-293C02

Record ID: LIN-293C02
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A broken radiate of Claudius II (268-70), dating to the period 270-1. CONSECRATIO reverse type depicting a flaming altar, struck after the death of Claudius II.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-29360A

Record ID: WMID-29360A
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy nummus of the House of Constantine (AD 307 to AD 361), dating to the period AD 330 to AD 340 (Reece Period 17). CONSTANTINOPOLIS reverse type depicting Victory standing left on prow of galley. Mint uncertain. Diameter: 15.0 mm Thickness: 1.8 mm Weight: 1.1 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-292ABB

Record ID: SWYOR-292ABB
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Roman coin; an incomplete denarius of Vespasian (AD 69 - 79) dating from AD 72 (Reece Period 4). VICTORIA AVGVSTI reverse type depicting Victory advancing right placing wreath on standard and holding palm. Mint of Rome. Compare Sear Volume I number 2317 on page 439 which cites RIC 52. The coin is 18.8mm diameter, 2mm thick and 2.03g.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-2921C4
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Eight illegible late Roman copper alloy radiates or nummii.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of DENO-29196A

Record ID: DENO-29196A
Object type: VESSEL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A base sherd from a Roman (AD c.43-c.402) grey ware vessel. The fabric is fairly soft, fine and light grey in colour. There are frequent small red and black inclusions. There is a groove along the edge of the upper surface. It may have been reshaped and used as a lid. Overall, the sherd measures 43.6mm long, 20.1mm wide and 9.2mm thick. It weighs 10.36g.
Created on: Tuesday 30th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-2915BE
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of Crispus (AD317-326), dating to the period 318-324. CAESARVM NOSTRORVM reverse type depicting a wreath enclosing VOT X. Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-290D2E

Record ID: WMID-290D2E
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy strap fitting or belt mount, in the form of a stylised Acorn, of Post Medieval dating (AD 1500 to AD 1700). The mount is irregular in shape. The front of the mount is convex, and the reverse concave. It consists of a pointed oval shape, with a hooked extension on the base. The lower half of the mount has a horizontal line, separating the top from the base, and the base section has been cross hatched to resemble an acorn cup. The reverse is undecorated. Two incomplete integrally cast attachment spikes, both with circular sections are present on the reverse of…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-290ABA

Record ID: LEIC-290ABA
Object type: COIN
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver halfgroat of Henry VIII, issued by Thomas Wolsey, York mint, 1514-26. The coin is incomplete and has been struck off centre.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-290526
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Constantine, struck AD330-337. CONSTANTINOPOLIS commemorative type depicting Victory on prow. Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-28FCFD

Record ID: LANCUM-28FCFD
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval copper alloy tinned or silvered livery button emblazoned with the coat of arms of the Assherton family. The button broadly dates from AD 1750 to 1900. The diameter is 28mm and the weight 7.56g.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-28F98B
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Constantine, struck AD330-337. VRBS ROMA commemorative type depicting Romulus and Remus suckling the She-wolf. Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-28F312

Record ID: SWYOR-28F312
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman coin; a nummus of Constantius II dating from the period AD 347 - 348 (Reece Period 17). VICTORIAE DD AVGGQ NN reverse type depicting Two Victories holding wreaths, standing facing each other. Mint of Trier. LRBC number 138 on page 6. The coin is 15.1mm diameter, 1.3mm thick and 1.07g.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-28E5BC
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Constantine, struck AD318-324. VICTORIAE LAETAE PRINC PERP reverse type depicting two Victories standing, holding a shield between them. Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-28D4BA
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Constantine, struck AD343-348. This coin is a contemporary copy, probably of Constans, depicting the reverse type VICTORIAE DD AVGG QNN (Two Victories standing facing one another, each holding a wreath). Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-28BD25
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Constantine, struck AD330-337. CONSTANTINOPOLIS commemorative reverse type depicting Victory standing on the prow of a ship. This coin is a contemporary copy imitating the mint of Trier. The bust is blundered, as it merges both a helmet (as should be seen on this type of coin), and a laureate crown (which is seen on most other coins of this period).
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-28BB0B

Record ID: SWYOR-28BB0B
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval coin; a cut half short cross penny of John (AD 1199 - 1216), Class 5bi (AD 1205) struck by Goldwine at Canterbury. See North number 970i on page 221. The coin is 18.3mm long, 9.6mm wide and 0.7mm thick. 0.68g.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-28ADEA
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Valentinian (AD364-378). SECVRITAS REIPVBLICAE reverse type depicting Victory advancing left. Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-28934E
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper alloy nummus of the House of Valentinian (AD364-378). GLORIA ROMANORVM reverse type depicting the Emperor going right, dragging a captive. Illegible mint.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of LIN-28588F

Record ID: LIN-28588F
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A base silver Republican denarius of Mark Antony dating to the period 32 - 31 BC (Reece Period 1). LEG II reverse depicting legionary eagle between two standards. Travelling mint. The debased nature of this coinage meant that is remained in circulation for an extended period into the 3rd century AD so are most often found in very worn condition or with bankers' assay marks. Probably RRC 544/18. Diameter 17mm, Weight 2.68g.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-284753
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy Colchester Derivative Rear Hook brooch (Mackreth 2011 type CD RH). C-sectioned wings, broken rear hook, slight crest at top of D-sectioned bow with a groove along each edge fading before the break. Spring, pin, and lower part of bow missing. Width 22mm. Surviving length 25mm.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-2840CC

Record ID: WMID-2840CC
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy nummus of the House of Constantine (AD 306 to AD 361), dating to the period AD 321 to AD 324. IOVI CONSERVATORI reverse type depicting Jupiter standing left, leaving on eagle-tipped sceptre and holding Victory on globe, to left eagle and to right, captive. Mintmark uncertain. Diameter: 17.3 mm Thickness: 2.1 mm Weight: 2.1 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-280AD6

Record ID: WMID-280AD6
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver denarius of Septimus Severus (AD 193 to AD 211), dating to the period AD 202 to AD 210 (Reece Period 10). VOTA SVSCEPTA XX reverse type depicting Severus veiled, standing left, sacrificing out of patera over altar. Mint of Rome. RIC Vol IV, p 129, no 308. Diameter: 19.0 mm Thickness: 2.5 mm Weight: 2.2 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-27F398
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy dress hook. Openwork plate in the form of a cabled trefoil knot, trapezoidal attachment loop, broken hook. Read Class E Type 5 (2008, 110, nos.436 - 439). Length 28mm. Width 20mm. 16th - 17th century.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-27DC83
Object type: PURSE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval or post-medieval copper alloy purse bar. Just over half survives. Central plain rectangular boss with vertical hole, oval-sectioned arms, globular terminal with encircling rib and transverse groove at the end. Suspension loop and frame missing. Length (reconstructed) 110mm. Boss 8 x 8 x 13mm. Diameter of globular terminal 11mm. Late 15th - 16th century.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-27CE9D

Record ID: WMID-27CE9D
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Irish half crown of James II (AD 1685 to AD 1691), issued as part of the 'Brass Money' or 'Gunmoney' coinage, in AD 1689 (month uncertain) at either the Dublin or Limerick mint. Spink, p168, no 6579. Diameter: 32.4 mm Thickness: 2.4 mm Weight: 12.9 g These were official tokens issued in Ireland when James was attempting to recover the English throne and and were supposed to be exchanged for silver coins of equivalent value. They were made from old cannon, bells and scrap metal. James failed in his attempt and the coins were never exchanged.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-27B812

Record ID: SWYOR-27B812
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, copper alloy Roman brooch; a T shaped brooch probably dating from AD 60 - 90. The head is tubular with a central slot to accommodate the hinged pin. The copper alloy pin bar and a short section of the copper alloy pin remain in place. The bow is undecorated and has no distinct foot, simply tapering and flattening to an integral catch plate which is incomplete. The brooch has a smooth green patina. It is 31mm long, 21.7mm wide, 14.3mm thick and 4.01g. A number of similarly undecorated brooches are recorded on the database; see for example references WILT-460F5A, SOM-0BA0…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-279A63

Record ID: SWYOR-279A63
Object type: PROCESSIONAL CROSS
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy cross-shaped finial of probably Post Medieval date, possibly a mount from a processional cross, censer lid, or even from a piece of furniture. The cruciform terminal has arms which are circular in section and which termiate in a globular sub-spherical knops with a thin collar. The knop at the base of the lower arm has a patinated break t its base showing that it was originally larger and/or was attached to another object. The metal has a well developed grey green patina. It has been surprisingly difficult to find parallels on the database, but objects with some similarit…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-27998B

Record ID: WMID-27998B
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cut half penny of Henry III (AD 1216 to AD 1272), dating to the period c. AD 1236 to c. AD 1242. Moneyer probably Nicole. Mint either London or Canterbury, probably London. Class 7c. North, vol 1, p 223, no 980. Diameter: 17.7 mm Width: 9.8 mm Thickness: 0.7 mm Weight: 0.7 g
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-277D2E
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward I, class 3d, London, North 1019, 1280-1
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-276EED
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Henry III, voided long cross class 3, moneyer Willem of Winchester, 1248-50
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-2760D1
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut farthing of Henry III, voided long cross class 3b, uncertain London moneyer 1248-50
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-274FBE
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, voided long cross class 5g, moneyer Roger of Durham, 1258-70
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-273A24
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, voided long cross class 3, uncertain Canterbury moneyer, 1248-50
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-273612

Record ID: LIN-273612
Object type: TOY
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-Medieval lead whirligig or buzz disc/wheel of possible 17th to 18th century date. The toy is sub-circular in plan and sub-rectangular in cross-section. It consists of a disc with a serrated outer edge and two string holes at the centre. Both sides appear to be undecorated. The toy is now damaged in the middle, and now is roughly folded in two. The object is largely grey with patches of buff deposits. Most of the points are missing due to breaks. Diameter 40mm. Weight: 34.40g. Similar objects have been recorded on The Portable Antiquities Scheme database. For exam…
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WILT-272DEA

Record ID: WILT-272DEA
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete gilded copper alloy post medieval strap fitting dating to the period c. AD 1600 - 1700. The mountstrap fitting ils in each quarter which are indistinct due to wear. The edge of the plate is slightly raised to form a reserve border. The obverse of the strap fitting is gilded, the reverse is not. The reverse exhibits two tapering spiked lugs which have been bent inwards. One of the lugs terminates in an old break. The strap fitting measures 22.32mm in length, 16.65mm in width, is 8.11mm thick (including lugs) and weighs 4.14g.
Created on: Tuesday 30th June 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-27270E
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Alexander III of Scotland, voided long cross and stars type, uncertain Berwick moneyer, 1250-80
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-2726A2

Record ID: LIN-2726A2
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A lead steelyard weight. The weight is conical with a flat base. It is solid and has an iron loop at the top. Steelyard weights are difficult to date, but a Roman date is possible.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of LIN-271851

Record ID: LIN-271851
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A flat lozenge-shaped piece of lead with no decoration or means for attachment. It is of unknown date and function.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-27112A
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut farthing of William the Lion of Scotland, short cross and stars type, moneyer Hue or Hue Walter of uncertain mint, 1195-1230
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-270F01

Record ID: LIN-270F01
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A large lead unidentified object, possibly a weight or fitting. It is roughly circular in plan, domed, and has a narrow flat ledge around the perimeter. A circular hole passes through the centre. 61mm x 58mm x 13mm. The item has a blue-grey patina but does not have the feel of being particularly old. Probably post-medieval to modern in date.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Thumbnail image of WMID-270D2F

Record ID: WMID-270D2F
Object type: SPEAR
Broad period: BRONZE AGE
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy, possible tip from a spear head, of probable Middle Bronze Age dating (1500 BC to 1150 BC). Around 5% of the spear head is present, consisting only of the possible tip. It is sub triangular in shape, with a circular cross section. Traces of side blades are present to either side. It measures 25.9 mm in length, 7.6 mm wide (base), 5.0 mm wide (tip) and 6.2 mm thick. It weighs 3.6 g. The possible spear head is a dark green colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the or…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-26F761
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut farthing of John or Henry III, short cross class 5b-7b, moneyer Ilger of London, 1205-36
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-26E7B7
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, short cross class 7a-b, moneyer Terri of London, 1218-36
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-26E246

Record ID: WMID-26E246
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy horse harness pendant, of Medieval dating (c. 14th Century AD). The pendant is zoomorphically shaped to resemble the form of a two-headed bird in an upright posture. The bird's form is comprised of two outward facing heads, with an emphasis on identical foreheads and hooked beaks, a rectangular strip torso which tapers into a scalloped tail end and a long and thin sub-triangular wing to each side of the torso. No traces of decorative detailing are present on the front of the pendant. The reverse of the pendant is completely unadorned. Its suspension loop is att…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-26DCF0

Record ID: SWYOR-26DCF0
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Awaiting validation Find awaiting validation
An incomplete probable mount of Post Medieval date, about AD 1500 - 1800, the surviving part of which is triangular and is from the lower part of the complete object. The break at the top is worn and patinated, but appears to be across a central circular (rivet) hole. The object is decorated with a bad-tempered looking humanoid male face in low relief, perhaps the Green Man or a mythical creature such as a dwarf. He has a berd and sideburns depicted with radiating lines, a downturned mouth and moustache, a flattened nose, distinct ridges on the brow of his nose, double curved lines for…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-26DBB0

Record ID: WILT-26DBB0
Object type: PIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman pin dating to the period c. AD 43 - 410. The pin exhibits an irregularly shaped globular knob head incised with a single groove running acorss the top of the head. This is terminated by a roughly incised circumferential groove, below which there is an additional circumferential groove. The head measures 13.32mm in length and 11.82mm in width. The cylindrical shank extends from the bottom of the head and terminates in an old break. There is a faint incised groove at the top of the shank. The shank measures 4.72mm in diameter and 26.58mm in length. The p…
Created on: Tuesday 30th June 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-26D6A1
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of John, short cross class 5, uncertain Winchester moneyer, 1203-10
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-26C7A7
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Richard I, short cross class 2-4a, uncertain moneyer, probably Canterbury, c.1189-1200
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-26BE6D

Record ID: WMID-26BE6D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete sheet copper alloy buckle plate, of Medieval dating (AD 1350 to AD 1450). Approximately 50% of the buckle plate is present, consisting only of the front plate. None of the four sides are complete, the others are incomplete. The reverse plate is missing, presumed lost in antiquity. The plate is sub rectangular in plan and rectangular in section. A rectangular pin notch is present at the front of the plate. Two circular perforations (holes) are present at the back of the plate. They have an internal diameter between 1.6 and 2.2 mm. These holes would have originally taken …
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-26B711
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount from harness or furniture. Slightly hollow backed, shallow D-sectioned bar, constricted with slight pointed projection to either side before expanding to form a rounded, pierced terminal with pointed projection at one end, expanding briefly before a ragged break at the other. Very worn and corroded. Surviving length 59mm. Width of bar 13.5mm. Width of terminal 17mm. 13th - 14th century. For broadly similar terminals see NMS-D9D284 (Finningham, Suffolk) and NMS-EFA631 (HER56994, Elsing, Norfolk).
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-26B29A
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of John, short cross class 5, moneyer Hue of uncertain mint, 1205-10
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-269E97

Record ID: KENT-269E97
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medeival silver long cross penny of Edward III (1327-1377). Minted in Durham c. 1361-1369. Probably North Number 1229.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-269D9E

Record ID: WMID-269D9E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy annular buckle, with a drilled frame, and separate chape, of Post Medieval dating (c. AD 1660 to c. AD 1720). The buckle frame is sub annular in plan, and d-shaped in section. The frame exhibits moulded decoration, consisting of a repeating pattern of four transverse grooves with a plain raised section between them. The pattern repeats six times around the frame. The raised sections at either end of the central bar are larger than the ones on the outer loops. The reverse is undecorated. The spindle is still present, along with part of the chape. The buckle me…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-269902

Record ID: LEIC-269902
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver halfpenny of Henry VI (first reign), annulet issue, 1413-22, Calais mint.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-268F4F
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy sestertius of Septimius Severus, Rome, reverse [PART ARAB PART ADIAB] COS II P P type with trophy and captives, RIC 690b, weight 17.15g, AD195
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-265A35
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver soldino of uncertain Venetian Doge, perhaps Michael Stener, mintmark a star over P in the right field, ?1400-13
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-264633

Record ID: WMID-264633
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy rectangular buckle, with a drilled frame, and separate chape, of Post Medieval dating (c. AD 1660 to c. AD 1720). The buckle frame is rectangular in plan, and d-shaped in section.The frame has been decorated with moulded transverse and diagonal grooves on sides and end of the frame. The reverse is undecorated. The spindle is still present, along with the chape. The buckle measures 26.5 mm in length, 17.5 mm wide and 4.9 mm thick. It weighs 4.0 grams. The buckle is a dark green colour, with an even surface patina. Similar rectangular buckles with drilled fram…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-263AC7
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Edward III, Pre-Treaty Series G, London, annulet below bust but apparently not in any quarter of the reverse, North 1201, 1356-61
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-263A3D

Record ID: KENT-263A3D
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A silver penny of an uncertain late medieval ruler dating to the period AD 1351 - 1485. Long cross reverse. Mint of York. The coin is extremely worn rendering much detail illegible and therefore preventing any further attribution.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-262D24

Record ID: LIN-262D24
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper-alloy as of Gordian III (238-244), struck AD241-3. IOVI STATORI reverse type depicting Jupiter standing left. Mint of Rome. RIC 298b.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-2614D3
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver farthing of Edward I, Irish issue of uncertain mint, 1279-1302
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-2614DB

Record ID: WMID-2614DB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy single looped D shaped buckle frame, of medieval dating (c. AD 1350 to AD 1450). The buckle frame is broadly D shaped, with a D shape cross section. At the centre of the frame, a pin rest is present made from a single U shaped groove. Two flanking smaller grooves to either side as decoration. Two further diagonal grooves are present on the shoulders, also as decoration. Another diagonal groove is present at the corners next to the incomplete strap bar. The strap bar has been recessed for the plate (now missing). The remains of a sheet metal pin are still pre…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-26097D

Record ID: LIN-26097D
Object type: AWL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy awl, probably of Roman date. The awl has a slender shaft that is rectangular in section, and which tapers from 7mm x 6mm to 3mm x 2.5mm at the terminal. A narrowed waist is located just above the widest part of the shaft; above this is a conical terminal. The terminal is oval in section, measuring 8mm x 7mm at its widest, and tapering to a point. The awl has a dark green patina with patches of ligher green corrosion. Length: 72mm, weight 11.62g.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-25F064
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Torn fragment of a silver penny of Henry III, voided long cross class 5, moneyer Willem of Canterbury, 1251-72
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-25DF9B
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver cut halfpenny of Henry III, voided long cross class 5, moneyer Renaud of London, 1251-72
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-25CFAC
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Henry III, voided long cross class 3a, moneyer Lucas of Northampton, 1248-50
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-25B68F

Record ID: LIN-25B68F
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Roman copper-alloy headstud brooch. The brooch has rectangular wings with a cylindrical case behind them. The pin is missing, The wing faces are very worn, but appear to have been decorated with vertical ribs, The bow is comma-shaped in profile and rectangular in section. The face of the bow is worn, but is decorated with a rectangular recessed panel containing a row of lozenges. The recessed field was probably once enamelled, but none survives. The foot is flat and oval, and a catchplate is located on the reverse.
Created on: Tuesday 30th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-25B5DC
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Broken silver penny of Henry VII, Sovereign type, York under Archbishop Rotherham with keys below shield, North 1727ff, 1485-1500
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-25A3DD

Record ID: WMID-25A3DD
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy asymmetrical bar mount of Post medieval dating (AD 1500 to AD 1800). The mount has a sub rectangular plate,with two incomplete integral attachment spikes on the reverse. The plate has flat terminals top and bottom, with semi circular notches removed from both sides. The upper notch is a third of the size of the lower notch. The attachment spikes have a rectangular cross section and an old, predepositional break. It measures 25.1 mm in length, 12.1 mm wide and 6.6 mm thick. It weighs 3.2 g. The strap fitting is a mid to dark green colour, with an even surfa…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-2575C8

Record ID: KENT-2575C8
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1279-1301. Uncertain class 1d- 9b.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WMID-256E25

Record ID: WMID-256E25
Object type: LACE TAG
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy lace tag or aiglet, of Post Medieval to Modern dating (AD 1600 to AD 1800). The tag consists of a conical tube, open at the wider end and a collared ball head terminal at the other. A hole, with an internal diameter of 1.8 mm has been drilled through opposed sites. A longitudinal crack in the sheet metal, resembles a seam, and runs alongside one of the holes. Remains of organic material are present inside the aiglet. It measures 23.1 mm in length, 7.5 mm diameter (top) and 6.10 mm (bottom). The metal is 0.6 mm thick. It weighs 2.1 g. The tag is a dark green co…
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-254A89

Record ID: KENT-254A89
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in Burry St Edmunds, c. AD 1299-1301. Calss 9b. North number 1037.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-25201D

Record ID: KENT-25201D
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1301-1310. Calss 10 ab. North number 1038/9.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-24C76C

Record ID: KENT-24C76C
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver penny of Henry VI, first reign (AD 1422-1461) dating to AD 1422 to 1427. Annulet issue, cross II, minted at Calais. North (1991:74), no. 1432.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1862DC
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy folding strap clasp, an oval frame and part of an integral plate or forked spacer. The outside edge is recessed for the sheet folding end, of which a small part is present. Both faces of the plate are very slightly recessed and one carries traces of solder. The break cuts across a probably a pair prongs. Cf. Egan and Pritchard 1991, fig. 78 and Whitehead 2003, nos. 240-1. Extant length 24.3mm. Width of frame 11.4mm, of plate 8.5mm. c.1270 - c.1450.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1834E5
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy annular framed brooch. The D-sectioned pin (tip missing) is set in a constriction. The cross-section of the frame is D-shaped, with the inner face being almost straight. The front face is decorated with a ring of pellets in counter-relief, cf. NMS-F64AB5, on which the pellets are larger and fewer. Diameter 21.3mm. Thickness 2.5mm. Late 13th - 14th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-17F77B
Object type: FINGER RING
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Late Saxon sheet copper alloy finger ring, about one quarter surviving. Three punched ring-and-dots and part of a fourth are flanked by engraved lines running parallel to the edges. The form is uncertain but it was probably similar to an example from Thetford (Goodall, A.R. in Rogerson and Dallas 1984, fig. 110, no. 113). Width 6.2 - 7.5mm. Very approximate diameter 20mm. Mid 9th - 11th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of NMS-17F06A

Record ID: NMS-17F06A
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy button or linked cloak fastener. Discoidal with convex front and concave back. Integral drilled loop in centre of reverse face. Front face decorated with engraved and punched floral design. Similar buttons and linked fasteners are shown in Read, B. Metal Buttons 900-1700 (2005); p39-40. Circa 1600-1750 AD.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1765C3
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Neolithic soft hammer struck secondary sub-triangular flake of brown patinated mottled grey flint with a small area of semi-invasive retouch to one edge towards the distal end. A notch on the distal end is unpatinated and is recent damage. 52 x 41 x 6.5 mm.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-17580D
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Neolithic to Bronze Age hard hammer struck secondary notched implement of unpatinated grey flint with a natural flaw running across the central area of the ventral face. One edge has a steeply retouched notch 8 mm wide. 43 x 31 x 10 mm.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-174909
Object type: FLAKE
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Neolithic to Bronze Age hard hammer struck secondary flake of unpatinated black/brown flint with some small areas of recent damage to parts of the edges. 42 x 39 x 13mm.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-173A46
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Neolithic to Bronze Age hard hammer struck secondary scraper of unpatinated glossy brown flint with a small patch of white and brown cortex extant towards the distal end of the ventral face. All edges are steeply retouched except for the platform. 35 x 25 x 8 mm.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-1668D1

Record ID: WILT-1668D1
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Early Roman enamelled button and loop fastener dating to the period c. AD 50 - 150. The fastener is of Wild's Type III and is an inverted petal or teardrop shape. There is a protruding central circular boss surrounded by a circumferential groove which contains a white substance which is probably degraded enamel of uncertain original colour. There is a longitudinal ridge running from the tip of the basel end to the edge of the circumferential groove. The reverse of the fastener is slightly concave and exhibits the remains of the attachment loop which projects …
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-164594
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy Colchester Derivative Rearhook brooch, with the spring, pin, foot of the bow and most of the catchplate missing. Both the wings and the oval to round-sectioned bow are undecorated. Mackreth 2011, CD RH 5.k. Wingspan 24.6mm. Extant length 34mm. c.43 - c.65.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-163C3A
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Charles I, Tower, reverse oval shield with C_R flanking, initial mark and further details illegible, 1625-49
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-161D4F
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver coin, worn almost smooth, probably a threepence of Elizabeth I, Tower, further details illegible, 1561-82
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-160BA4
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Elizabeth I, Tower, coronet initial mark, North 2001, 1567-70
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1608A8
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two fragments of Roman copper alloy Colchester Derivative Harlow brooches, c.43 - c.75: - tinned, head with plain wings, upper end of bow, flat-sectioned but with pronounced median rib. Wingspan 18mm. - foot of bow of sub-triangular cross-section and a solid catchplate with a pin groove
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-15FB4D
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of James I, Tower, tower initial mark, North 2106/1, 1612-13
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-15E5A5
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of James I, Tower, lis initial mark, North 2104, 1604-5
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-15D461
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of Edward Peterson of Yarmouth, Williamson 334, c.1650-67
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-15C727
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of Charles I, initial mark and further details illegible, cf North 2277, 1625-34
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-15C6DE

Record ID: WILT-15C6DE
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplet copper alloy Roman T-shape brooch dating to the period c. AD 50 - 150. The pin is missing. The brooch measures 47.01mm in length, 25.36mm maximum width, 0.62mm minimum width, is 10.71mm thick and weighs 5.97g. The head exhibits cylindrical wings which span a width of 25.36mm. The wings house the corrosed remains of the iron axis bar and are divided by a central pin slot for the hinged pin (now missing). The tip of each wing is decorated with two circumferential grooves. There is a groove on either side of the bow at the point where it arches back from the head. The bow th…
Created on: Monday 29th June 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-15BA65
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, crescent initial mark, North 2291, 1636-44
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-15B720
Object type: FINGER RING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy finger ring, most of the hoop missing. A raised square bezel lies between shoulders, is slightly narrower tham the hoop and is decorated with a saltire of punched dots. Diameter not accurately measurable. Width 6.9mm. Bezel 6.5 x 5.6mm. Thickness 2mm (of which bezel accounts for 1mm). 3rd - 4th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-1598C7

Record ID: LIN-1598C7
Object type: JETTON
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton of Hans Krauwinckel II, small Nuremberg rose-orb type, obverse HANNS KRAVWINCKEL IN NV, reverse GOTTES GABEN SOL MAN LOB with cross initial mark around orb. struck 1586-1635.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1597DB
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, crescent initial mark, North 2291, 1636-44
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-158F88
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy rose farthing of Charles I, crescent initial mark, North 2291, 1636-44
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-158764

Record ID: LIN-158764
Object type: COIN
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver threepence of Elizabeth I, Second Issue, struck AD1576. North (1991), no. 1998.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-1570E2

Record ID: LIN-1570E2
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver groat, probably of Edward IV (first reign), Henry VI (restored), or Edward IV (second reign), mint of Bristol, struck AD1461-1483.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-154078

Record ID: LIN-154078
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver halfgroat, probably of Henry VII, mint of Canterbury. Possibly North (1991) no. 1711, struck AD1485-1509.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-1537AF

Record ID: FAKL-1537AF
Object type: CORE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Massive flint core, cylindrical and used for the production of broad flakes. One striking platform working from an original face of the nodule. The opposite face, towards which the flakes were stuck, is also original. The core seems to have been made using a large flint nodule and, while recorticated, has the blotchy appearance suggestive of the mixed colour flint typical of this site. This core is likely to be of Late Neolithic or Bronze Age date. Length 67mm, Width 68mm, Thickness 60mm, Mass 384.3g
Created on: Monday 29th June 2015
Last updated: Thursday 2nd July 2015
Spatial data recorded.


  • Image not taken

Record ID: WILT-15362B
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A worn copper alloy Roman nummus of Helena dating to the period AD 337 - 341 (Reece period 17). PAX PVBLICA reverse type depicting Pax standing left holding branch and transverse sceptre. Uncertain mint.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-151791

Record ID: LIN-151791
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver short cross penny of Henry III, struck AD1251-1272. Moneyer Henri of London. Class 5.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of WILT-15115D

Record ID: WILT-15115D
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy early medieval zoomorphic strap end dating to the period c. AD 750 - 900. The strap end is of Thomas' Class B Type 2 and features a tapering plate. The end is wedge-shaped and exhibits two incomplete rivet holes due to old damage. The plate then tapers and thickens from a thickness of 0.69mm to 3.52mm. The strap end terminates in a zoomorphic terminal. The decoration is indistinct due to wear, but it appears to depict an animal with long ears laid back along the shaft. Each ear features a slight depression in the centre. On either side of the head is a promi…
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-150784

Record ID: FAKL-150784
Object type: FABRICATOR
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Fragment of a flint fabricator. The implement has a D section and all faces have been flaked, some battering has occured along its edges. It is fully recorticated but a damage shows it to have been made from an opaque grey flint with white inclusions. The truncation is flat and non-conchoidal. Fabricators are difficult to date and a wide range must be suggested. Length 93mm, Width 23mm, Thickness 14mm, Mass 35.77g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-14E18A
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A broken silver short cross penny, probably of Henry III. Uncertain mint. possibly Class 7 (1217-1242).
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-14DC4E

Record ID: FAKL-14DC4E
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Fragment of a flint implement representing the tapering end of a chisel or small axe/adze. The implement has a triangular or D section and all faces have been coarsely flaked, some battering has occured along the edges. Original cortex is present on the curved back of the implement and it is fully recorticated. The truncation is flat and non-conchoidal. This object is difficult to date and a wide range must be suggested. Length 89mm, Width 35mm, Thickness 22mm, Mass 73.80g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of FAKL-14C742

Record ID: FAKL-14C742
Object type: LITHIC IMPLEMENT
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Fragment of a flint implement representing the tapering end of a chisel or small axe/adze. The implement has a triangular section and all faces have been coarsely flaked. Some battering has occured along the edges. The truncation is flat and non-conchoidal. This object is difficult to date and a wide range must be suggested. . Length 57mm, Width 25mm, Thickness 19mm, Mass 30.32g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-149F25

Record ID: DUR-149F25
Object type: SEAL
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Post-medieval date (AD 1550-1900). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. One face of the seal is too worn to distinguish any legend. The other face has a very worn stamped heraldic motif. Diameter: 25.39mm, Thickness: 4.11mm, Weight: 17.0g
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-149D03
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A broken silver halfpenny of Edward I-III.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of FAKL-149CED

Record ID: FAKL-149CED
Object type: AXEHEAD ROUGHOUT
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Fragment of a flint axe, pointed oval section and probably representing the cutting edge end of the implement truncated leaving a single hinge fracture where the termination occured. While some shaping has been carried out, although it appears that the cutting edge was not finished. The axhead has undergone coarse, bifacial, flaking and is now fully recorticated. The flint appears patchy suggesting that a mixed grey opaque flint was used. . Length 77mm, Width 74mm, Thickness 34mm, Mass 261.0g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-1491CC

Record ID: DUR-1491CC
Object type: SEAL
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Modern date (AD 1800-1900). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. A stamped legend appears on both sides with the centre bearing the interlocking letters CDC. The outer legend on one side reads [CARRICKS CUMBERLAND DAIRY]. The other most likely reads PURE [MILK SUPPLY CO LTD] Diameter: 17.27mm, Thickness: 4.01mm, Weight: 4.9g
Created on: Monday 29th June 2015
Last updated: Monday 6th July 2015
Spatial data recorded.


  • Thumbnail image of LIN-148C8C

Record ID: LIN-148C8C
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver penny of Edward I, possibly Class 3 (1280-1), mint of London.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of DUR-148135

Record ID: DUR-148135
Object type: SEAL
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Modern date (AD 1800-1900). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. One side bears the word [NEW PROCESSED] FLOUR. The other side is very worn but part of the legend is legible: [BALTISCHE]MUHL[EN GESELLSCHAFT]//NEU[MUHLEN/KIEL]. Diameter: 17.09mm, Thickness: 3.71mm, Weight: 5.5g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-147672

Record ID: LIN-147672
Object type: COIN
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver penny of Edward I, probably Class 4 (1282-9), mint of London.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of DUR-14746D

Record ID: DUR-14746D
Object type: SEAL
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Modern date (AD 1800-1900). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. A stamped legend bearing the numeral 3 appears on the obverse. The reverse reads LOUISEN.[D]AMPFMUHL.____S. This is a flour bag seal from the Louisen Steam Mill based in Hungary. Diameter: 18.96mm, Thickness: 5.54mm, Weight: 8.3g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-146968

Record ID: DUR-146968
Object type: SEAL
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Modern date (AD 1800-1900). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. A stamped legend appears on both sides. One side bears the words NO.TEN. The other side reads LTD. [NEW]CAST[LE] in the centre and the outer legend is illegible. Diameter: 19.17mm, Thickness: 4.51mm, Weight: 8.0g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of FAKL-14696D

Record ID: FAKL-14696D
Object type: FLAKED AXEHEAD
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flaked flint adze, section keeled/ trapezoid with thewider face.a convex. Made from opaque grey/ brown flint with some light recortication. Traces of the original cortex present in some areas. The flaking is finer than is usually seen on tranchet axes and the adze was sharpened by the removal of a series of flakes from the cutting edge which has suffered some damage, parhaps as a result of use. This object is difficult to date and both Mesolithic and Late Neolithic dates are possible. Length 123mm, Width 46mm, Thickness 34mm, Mass 198.7g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-145D79

Record ID: DUR-145D79
Object type: SEAL
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Modern date (AD 1800-1896). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. A stamped legend appears on both sides. One side bears the number 96 (to indicate the contents were bagged before 1896) in the centre with the outer legend [GR]ANDS.[M]OULINS.[D]E.COR[BE]IL . The last a first words are separated by the image of a six -armed star. The other side reads [FL]EURS.[SUPE]R[I]EURES MARS. This seal therefore comes from the Corbeil Commune and is associated with flour. Diameter: …
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-144FD6

Record ID: DUR-144FD6
Object type: SEAL
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete lead bag seal of Modern date (AD 1800-1900). The object is a disc with a slot in one edge and a bifurcated slot in the opposite edge, to function as a drawstring fastener. A stamped legend appears on both sides. One side bears the number 97 in the centre with the outer legend GRANDS.MOULINS.DE.GOR_EIL. The last and first words are separated by the image of a five petal flower. The other side reads MARS in the centre and the outer legend reads FLEURS.S__ERIEURES. Diameter: 21.23mm, Thickness: 6.01mm, Weight: 9.1g
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of FAKL-1430AB

Record ID: FAKL-1430AB
Object type: TRANCHET AXEHEAD
Broad period: MESOLITHIC
County: East Sussex
Workflow stage: Published Find published
Flint adze fragment, probabley from a Mesolithic tranchet type. The implement has a trapezoid/ keeled section with one flat face from which the other two faces were worked by the removal of large flakes. The flat face is curved (slightly concave) along its length. Sharpening was achieved by the removal of large flakes from the cutting edge which has suffered some damage, probably as a result of use. Partical recortication on a light grey, opaque flint. Small patch of cortex on flat face. Length 113mm, Width 43mm, Thickness 31mm, Mass 163.6g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-140CF5

Record ID: WILT-140CF5
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A worn and incomplete silver medieval groat of Henry VI (First reign) dating to the period AD 1422 - 1427. Mint of Calais. Cf, North, Vol. II. p. 74, no. 1424.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-13F946

Record ID: NMS-13F946
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Silver sixpence of Elizabeth I. London (Tower) mint, acorn initial mark. Dated 1573 above Royal shield on reverse. North 1997.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-13E79E

Record ID: DUR-13E79E
Object type: CHAIN
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A length of a copper alloy chain of Post-Medieval date (AD 1700-1850). Each link has a barley-like decorative pattern and a bulge where the ends have been secured. Length: 24.58cm, Width: 29.49mm, Thickness: 4.67mm, Weight: 92.9g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-13C80B

Record ID: DUR-13C80B
Object type: TOKEN
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy token of Post-Medieval date (AD 1800-1900). The token is very worn and corroded and detail is difficult to make out. The reverse contains a '1' in the centre, most probably referring to its denomination. Diameter: 23.27mm, Weight: 1.6g
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-13BBEE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete and distorted medieval copper alloy oval buckle frame, stumps of offset, narrowed bar, distorted sides, outside edge with three worn transverse grooves. Distorted dimensions 19 x 28mm. 13th-14th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-13AAB0

Record ID: DUR-13AAB0
Object type: TOKEN
Broad period: MODERN
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy token of Modern date (AD 1837-1900). The token is for the Golden Tiger pub in Newcastle and the Turks Head Hotel in Gateshead. The obverse reads: ES_INGTON.PARK.G[R]OUNDS around the outside with a floral and leaf design at the base. The image in the middle is too worn to decipher. The reverse reads: WILLIAM.ATKINSON/GOLDEN.TIGER/[NEW]CASTLE on one half and is mirrored by: __SON.GARDNER/[T]URKS.HEAD/ GATESHEAD. The Golden Tiger was a pub in The Bigg Market in Newcastle that was demolished sometime after the 1960s. The Turks Head was an historic hotel built i…
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-138F2E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy shoe buckle, corroded stumps of missing iron spindle, pin and chape missing. The form and decorative details are similar to those of Whitehead 2003, no. 613, but with shallower concavities and shorter oblique projections on the sides. Length 32.5mm. Width 22mm. c.1660 - c.1720.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of FAKL-1375D0

Record ID: FAKL-1375D0
Object type: AXEHEAD
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Published Find published
Fragment of a Late Neolithic polished axe. This appears to have been fully polished but was subsequently reworked leaving only a small area of polish on one side of the cutting edge and on isolated patches elsewhere showing that it was fully polished and is not a Late Neolithic edge polished axhead. The axehead is now recorticated but it appears to have been made from a mixed grey flint. The flaking is coarse and bifacial and battering is present on one of its sides and near the butt. The implementhas a pointed oval section. Length 108mm, Width 51mm, Thickness 30mm, Mass 174.6g
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-136A22

Record ID: DUR-136A22
Object type: JEWS HARP
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-allow Jew's harp of Post-Medieval date (AD 1550-1800). One of the arms is broken and the iron prong is missing. At the apex, on the front face, is a rabbet to accommodate the iron prong. In plan it has an oval-shaped head and tapering arms, both of which are characteristically lozenge-shaped in cross-section. Length: 74.25mm, Width: 46.14mm, Thickness: 7.61mm tapering to 2.90mm, Weight: 27.6g.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: LIN-134D63
Object type: COIN
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver groat of Mary (1553-1554), mint of London. North (1991), no. 1960.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-133B95

Record ID: LIN-133B95
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper-alloy nummus, probably of the House of Constantine. The reverse is worn, but may depict to Victories standing facing one another, holding a shield over an alter (VICTORIAE LAETAE PRINC PERP), dating circa 318-324. The coin has been pierced at the back of the head.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LEIC-1318C5

Record ID: LEIC-1318C5
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published Find published
Roman silver denarius of Antoninus Pius (AD 138-161), dating to AD 150-151 (Reece Period 7). Reverse: TR POT XIIII COS IIII TRANQ, Tranquillitas standing right, holding rudder and corn-ears. Mint of Rome. RIC III, p. 51, no. 202.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-130A60

Record ID: NMS-130A60
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete copper alloy Roman nummus of the House of Constantine, possibly of the emperor Crispus. Reverse; BEATA TRANQVILLITAS, Globe on altar inscribed VOT/IS/XX. Further details illegible. Reece period 16. Circa 318-324 AD.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-12FE38

Record ID: LEIC-12FE38
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy Barborous radiate, possibly of Carausius? reverse type Vicory advancing?
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-12CD6C

Record ID: LEIC-12CD6C
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Constantine I, Reverse type, VOT XX, AD318-24 .
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-12C3E4

Record ID: DUR-12C3E4
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Chape/Tongue from a Buckle of Post-Medieval date (AD 1660-1790). The object is composed of a cast, tapering pin and waisted plate with a circular attachment loop at its lower end. The pin bar is missing. The metal is a dark brown in colour with a smooth patina.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-12B0A3

Record ID: DUR-12B0A3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy buckle of Medieval date (AD 1250-1400). The object is composed of a single sub-oval loop with expanded upper end which creates a D shape, narrowed strap bar and a retained buckle plate formed a single folded sheet of copper alloy. The expanded portion has a narrowed mid-section to accommodate a roller composed of folded sheet of copper alloy. The plate retains two rivets at its upper end and an incised linear boarder respecting the outline of plate. The lower portion of the plate and the pin are missing due to old breaks. The metal is a dark green in colour …
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-12AC11

Record ID: LEIC-12AC11
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Constantine II, Reverse type, GLORIA EXERCITVS - two soldiers, two standards, Lyon mint, 330-335AD.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-129BDA

Record ID: DUR-129BDA
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy belt fitting of Post-Medieval date (AD 1550-1700). The clasp is broadly S shaped with a flattened ovate cross-section. There is an integral decorative pattern consisting of a highly stylised single flower at either and, divided by a transverse linear boarder. The metal is a dark greenish brown in colour with a smooth patina. S-shaped 'snake belt' fasteners were probably associated with sword belts in the 17th and 18th centuries and parallels can be seen in Read's (2008) Hooked-clasps & Eyes: p230-231. The examples with swan heads are widely considered to b…
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-128B76

Record ID: WILT-128B76
Object type: PURSE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy medieval or post medieval purse bar dating to the period c. AD 1450 - 1550. The purse bar consists of a moulded beast's head gripping the side bar whcih would have originally been attached to the now missing central boss. The side bar is ovular in cross-section and terminates in a narrowed collar followed by an expanded circular-cross-sectioned terminal. The side bar exhibits a pattern of lattice-work grooves inlaid with niello. An attachment flange projects from the underside of the side bar and exhibits two sewing holes. The purse bar measures 72.62mm in l…
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-128508

Record ID: LEIC-128508
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Constantine I, Reverse type, GLORIA EXERCITVS, Two soldiers, Lyon mint, 330-335AD.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of DUR-1276B2

Record ID: DUR-1276B2
Object type: MEDAL
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A complete Copper alloy medal of Modern date (AD 1850-1900). The object is a flat, circular disk with a single circular perforation at 12 o'clock. The obverse depicts two female figures, representing saintly temperance guiding a child between them while turning away from devilish intemperance, represented by a triple headed snake in the right of field. Below the legible portion of the inscription reads: Children. The reverse depicts clasped hands and a wreath boarder within which the inscription: I DO AGREE THAT I WILL NOT USE INTOXICATING LIQUORS AS A BEVERAGE//HEALTH/INNOCENCE/PEA…
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-1265B7

Record ID: LEIC-1265B7
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of the House of Constantine, Type CONSTANTINOPOLIS, Victory on a prow, AD330-35, Antioch mint.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1263C2
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Broken fragment of a silver halfgroat of James I, Tower, rose initial mark, North 2104 or 2127, 1605-21
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-125034
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton of Hans Krauwinckel II, small Nuremberg rose-orb type, GOTTES GABEN SOL MAN LOB, further details illegible, 1586-1635
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-124031

Record ID: LEIC-124031
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Theadora, Reverse type, PIETAS ROMANA,Pietas standing facing, carrying an infant at her breast, Trier mint, 337-340 AD.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-120FA0

Record ID: LEIC-120FA0
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Unknown, unidentified object, 27mm long, 12mm wide and 5mm thick with a weight of 4.07grams. The object is incomplete and has a rectangular form and cross section. It is larger at one end and consists of a rounded upper surface with a small rounded projection emerging from the base of this. Behind this is a broken circular sectined projection. The underside continues fairly straight whilst the upper surface has a further rounded projection, before falling down to form a very rectangular sectioned rounded hook shaped terminal at the far end, which has a rounded void underneath it. Par…
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-12041B

Record ID: LIN-12041B
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Published Find published
An early Roman copper-alloy contemporary copy of an as of Agrippa under Caligula (AD 37-41), Reece Period 1. Reverse: Neptune standing left with dolphin and trident. For type, see RIC I (revised edition), p. 112, no. 58.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-11D8E8
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfpenny of Henry VI, annulet issue of Calais, North 1435, 1422-7
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-11D288

Record ID: LEIC-11D288
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
6 Roman coins from the same location, all worn. The last (photographed seperately) may be an As/Dupondius of Antoninus Pius? wgt D Th 3.23 24 1.5 2 17 1.5 0.82 16 1 0.92 12.5 1 0.71 11 1 6.57 26 3
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-11C90A
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete and distorted post-medieval copper alloy double-looped buckle frame with a strip pin and concave sides. Part of one side is missing. Cf. Whitehead 2003, no. 318. Estimated length 35mm. Width 28.7mm. 16th century. Field RG2
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-11C773
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver penny of Edward I, class 4b, Canterbury, North 1024, 1282-9
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-11BDAC
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of Iron Age or Roman copper alloy bow brooch, upper part missing, worn narrow flat-sectioned foot with stump of missing catch-plate. Width 5mm. Extant length 31mm. c.20-c.80 AD.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-11B947
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Broken fragment of a cut silver farthing of Henry III, voided long cross class 5, further details illegible, 1251-72 (find number 7)
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of NMS-11B8AA

Record ID: NMS-11B8AA
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete copper alloy Roman irregular radiate. The coin is unusual in that it is double headed with an obverse portrait on either side. One side has a right facing radiate portrait of the emperor Victorinus, [...]TORINVS[...]; and the other a right facing portrait of Tetricus I, [...]C TET[...]. Although of good style the coin appears to be the product of irregular coining. Circa 270-285 AD.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-11B657

Record ID: LEIC-11B657
Object type: PIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Late Roman copper alloy pin head, 21mm long, 12mm wide and 4mm thick with a weight of 9.45grams. The object has a square head with each corner cut off creating a facetted appearance. This sits on top of a circular sectioned shaft. The object matches fig.9. eg.11 in Cool, H.E.M. Roman metal hairpins from Southern Britain. Vol 147 Archaeological Journal 1990.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LEIC-11A5DD

Record ID: LEIC-11A5DD
Object type: VESSEL
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy pot leg, 35mm long, 25mm wide and 11mm thick with a weight of 35.26grams. The object has a rectangular form and a triangular cross section. It has a lower pointed edge and its triangular cross section forms a central ridge running down the outer surface of the leg. The object has an incomplete upper surface, having snapped cleanly from the vessel it was attached to.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-11A313
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver sixpence of Elizabeth I, Tower, initial mark eglantine, North 1997, 1574 (find number 1)
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-119FDC

Record ID: WILT-119FDC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A gilded copper alloy medieval single looped buckle with integral plate dating to the period c. AD 1250 - 1400. The The buckle consists of an ovular frame with a small knop on either side at the point where the frame meets the integral plate. Between the two knosp is a circular perforation to create the pin bar. The butt of the pin is looped through the perforation and folded back on itself. The tip of the pin tapers and rests across the front of the frame. The integral plate exhibits two rivet holes, neither of whcih retains a rivet. The plate widens slightly at the opposite end of th…
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LEIC-119010

Record ID: LEIC-119010
Object type: KNIFE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy knife fitting, 20mm long, 10mm wide and 9mm thick with a weight of 5.51grams. The object has a rectangular form and cross section and is undecorated. One edge has an oval centrally placed hole, which co-incides with a larger hole on the opposite edge, which sits within a recess that runs the width of the object. The object would have sat between a knife blade and a handle. the object is very similar to LEIC-933794
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-118874
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver sixpence of Elizabeth I, Tower, initial mark O, North 2015, 1600
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-117843

Record ID: LEIC-117843
Object type: CHAPE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval or post medieval copper alloy chape, 24mm long and 6mm in diameter at its open end, with a weight of 2.05grams. The object consists of a sheet of copper alloy that has been folded to form a cone with a very elongaetd point. The object could be a strap or lace chape.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-11685E

Record ID: WILT-11685E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy medieval single-looped buckle and frame dating to the period c. AD 1250 - 1400. The buckle frame is incomplete and terminates in an old break at either end. The buckle plate is formed from a single piece of metal wrapped around the strap bar with a central slot to house the missing pin. The buckle plate narrows along its length from a width of 17.86mm to 15.12mm. There is a rivet through the plate at the opposite end to the buckle frame, which pierces both ends of the bent piece of metal. The plate is undecorated. The buckle measures 45.53mm in length, 31.86…
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-1158E6

Record ID: LEIC-1158E6
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver Edwardian penny, London mint, Class 10-11, 1300-14.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LIN-11416D

Record ID: LIN-11416D
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A late Roman copper-alloy nummus of Constantius II, depicting the reverse type FEL TEMP REPARATIO (Victory standing on prow). mint of Trier. Struck AD348-350. RIC VIII no. 239.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of LEIC-113AAD

Record ID: LEIC-113AAD
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver sixpence? of James I, first issue, 1603. The coin is very worn and has been pierced with circular holes in two places, both of these have been damaged by use.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-112A95
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy furniture fitting, a round-section knob with an iron shank embedded in the base. The cross-section of the shank is obscured by a mass of decayed iron that derives in part from another object. Quite similar to Allason-Jones and Miket 1984, cat. no. 3.736. Height 27mm. Diameter 20mm. Mid 1st - 4th century. Field RG2
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-111860

Record ID: WILT-111860
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy post medieval openwork belt fitting for a sword belt, baldrick or horse harness dating to the period c. AD 1500 - 1700. The mount consists of an openwork trefoliate plate with an integral perforated lug projecting from one side. The lug retains the corroded remains of an iron rivet. On the opposite side of the trefoil there is a circular perforation also containing the corroded remains of an iron rivet. On the same side, the fitting exhibits two upwards pointing projections which terminate in an old break and may be part of a continuation of the openwork desi…
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LEIC-1111CC

Record ID: LEIC-1111CC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle, 15mm long, 13mm wide and 3mm thick with a weight of 1.32grams. The buckle is rectangular in form and cross section with a slightly recessed strap bar, rounded sides and a large rectangular pin rest, with three incised lines in its centre.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-1111AE
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval sheet copper alloy rectangular strap plate, two rectangular plates secured by four rivets (three dome-headed, one missing). Length 17mm. Width 20mm (backplate length 15mm, width 19mm). Gap between the plates c.1.2mm. Cf. Egan and Pritchard 1991, no. 1212. 14th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of NMS-10FABF

Record ID: NMS-10FABF
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Post Medieval copper alloy buckle, probably a fragment of a double rectangular loop type with externally hexagonal frame. The surviving remnant consist of around 40% of the frame. The pin, strap bar and second loop are missing. Similar complete buckles are illustrated in Whitehead R. Buckles 1250-1800 (2003) 82; 510-514. Circa 1570-1700 AD.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-10F9E1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman coin, completely obliterated and corroded, perhaps a large radiate or nummus, c.AD286-353, but uncertain (find number 5)
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-10E5B1
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy buckle fame, broken and distorted oval, pin-groove on outside edge, stumps of missing offset narrowed bar. Length c.28mm. Width (estimated) c.44mm. 13th-14th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-10E3D8

Record ID: LIN-10E3D8
Object type: LEAF ARROWHEAD
Broad period: NEOLITHIC
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Neolithic or Bronze Age flint leaf shaped arrowhead. The arrowhead appears to have been ogival with a pointed base, though the pointed base is now missing. The arrowhead has bifacial retouch that is covering, scaled, and low angled. It is light brown in colour.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-10D9E1
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragmentary silver penny of Edward I, broken in two, class 10ab1-3 obverse with class 9 reverse, London, North 1038/1ff, c.1300-3 (find number 4)
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-10D4C9

Record ID: LIN-10D4C9
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A Neolithic or Bronze Age flint scraper or knife made on a secondary flake that contains a small patch of cortex on the dorsal surface. The item is roughly triangular in plan, having slightly concave sides. A bulb of percussion is visible on the ventral surface, but the striking platform is no longer visible, having been worked with short, abrupt, sub-parallel retouch in order to blunt the edge. The edge that runs parallel to the bulb of percussion (at the distal end) contains low angled, long, scaled retouch, taken from both sides.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-10C12B
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a groat of Elizabeth I, Tower, cross-crosslet initial mark, North 1986, 1560-1 (find number 3)
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-10C10C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle fame, oval with offset narrowed bar, pin missing. Length 12mm. Width 15.5mm. Cf. Egan and Pritchard (1991), Dress Accessories, fig.45, no.304. 13th-14th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-10AD56

Record ID: LIN-10AD56
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A possible Neolithic flint retouched flake. The item is made from a tertiary flake, and has some evidence for retouch. The flake is thin, tapering from 4mm at the striking platform to just under 1mm at the distal end. The dorsal surface has one large flake scar running down the centre, with a narrow flake scar to either side. A small, concave, area of possible retouch is visible at the distal end, as is a small area on the left side of the flake. The retouch appears to be low angle, short, and parallel. The flint is light brown in colour.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of CORN-10AC4A

Record ID: CORN-10AC4A
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Copper sol of Louis XIV of France (1643-1715), missing part of date, but early bust so likely c.1649-1653, and any mint letter on reverse.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of WILT-109A61

Record ID: WILT-109A61
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy post medieval mount, possibly part of a sword-belt fitting (hanger) dating to the period c. AD 1500 - 1700. The mount consists of a symmetrical moulded plate with two side knops which then taper into a narrowed waist before flaring about into a second pair of knops and then terminates in a rounded terminal. The obverse is decorated with a symmetrical foliate design in relief surrounded by a narrow undecoreated raised border which follows the shape of the plate. There is a circular rivet hole which retains an iron rivet at the top of the mount. The reverse of …
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of CORN-109079

Record ID: CORN-109079
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Incomplete glass bottle seal, ovate in plan and slightly domed in profile on the reverse of the seal. The obverse has the name 'Walter Maunder / [1]713' in relief. The seal is made of dark green glass and would have attached to an onion-shaped bottle that would have contained wine. A Mr. Walter Maunder had his son Walter baptised at St. Mary's Church, Truro, on 13th January 1715. In 1715 a Walter Maunder was in possession of Phippens House, Truro. The seal may possibly commemorate the marriage of Walter Maunder to his wife Mary, although no marriage record could be located in the Cour…
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-106C91

Record ID: CORN-106C91
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy anthropomorphic finial, probably knife handle in the form of a male figure with a flat lozenge-shaped hat, thin collar or chain of office and what looks like a scroll of parchment between the collar and where the hands are clasped around it across the waist. The figure appears to be cloaked, and the shape of the hat suggests that the figure might have a stately office, such as Lord Chancellor, as it is like those worn by Thomas More and Thomas Cromwell during Tudor times, which are referred to as scholars' hats. Depictions of these characters were repeatedly reproduce…
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-10631F

Record ID: KENT-10631F
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver penny of Edward III, Post-Treaty Series minted in York, c. AD 1369-1377. North 1295
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-1055C1

Record ID: CORN-1055C1
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Silver groat of Mary I (1553-1554), mintmark pomegranate, Spink 2492, North 1960. There is an arrow-shaped hole within the edge of the coin, which is most likely due to post-depositional damage, rather than the coin being clipped to have the silver tested.
Created on: Monday 29th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-103696

Record ID: LIN-103696
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete unidentified object. It has a tear-drop shaped body that is domed plano-convex in section and which is broken at the narrow end. A small transverse collar is located above the wider end, and from this the object appears to expand to a collared, flat body. The reverse is undecorated and shows no signs of attachment. Possibly Roman.
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-102971
Object type: WEIGHT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Saxon to post-medieval discoidal lead weight. Diameter 22mm. Thickness 8mm. Hole diameter 6.5mm. Weight 24.81g. 11th - 16th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of LIN-10223D

Record ID: LIN-10223D
Object type: BULLA
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval lead papal bulla of Pope Adrian IV (c. AD 1100 to AD 1159), dating to the period AD 1154 to AD 1159, when he held the papacy. The bulla is circular, flat, and decorated on both sides. The obverse bears an inscription of ADRI/ANVS/PP.IIII, split over three lines. A circular border of pellets surrounds the inscription. The reverse depicts the busts of St Peter and St Paul facing one another. St Paul is depicted on the left of the seal looking right. He has a long pointed beard. St. Peter is on the right, facing left, and has a rounded face with beard and hair formed of pelle…
Created on: Monday 29th June 2015
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of NMS-10113D

Record ID: NMS-10113D
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy bar mount from a strap. Central sub-oval lobe flanked by two smaller lobes. Both terminal lobes pierced by extant copper alloy rivet, hollow-backed central lobe with band of incised cross-hatching. Cf. broadly similar examples in Dress Accessories (1991) fig.134, nos.1160-1. Circa 14th century.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-0FFFDA

Record ID: KENT-0FFFDA
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1301-1310. Calss 10 ab. North number 1038/9.
Created on: Monday 29th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-0276F9
Object type: BELL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a copper alloy, probably medieval,clapper bell, a suspension loop above a bulbous moulding above the apparently round uppermost part of the main body with remains of the iron cropn staple. Much of the patination has been lost to reveal dull purplish metal. Extant height 37mm. Perhaps 14th - 15th century. Field FLO17
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-01CB65
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two incomplete Middle Saxon to Late Saxon copper alloy pins, c.730 - c.900: - globular head with collar, lower part of shank missing. Head diameter 6.5mm. Rogers, N. in Evans and Loveluck 2009, Type 110. - polyhedral head (rectangular with chamfered corners) with collar and twelve ring-and-dots, i.e. one on each lateral face and on each corner, the shank a stump only. Head width 5.6 and 6.3mm. Head length 8.3mm. ibid., Type 230. Field HON2
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-00982D
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy round weight for 2 pennyweights. On one face stamped or engraved II / D and on the other a rectangular stamp TW and a sub-circular stamp a lion rampant. Diameter 14.5mm. Thickness 1.9mm. Weight 2.88g / 44.4 grains (2 dwt = 48 grains). 17th - 18th century Field HON2
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-FFF871
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Pear-shaped fragment of a gilt copper alloy, probably medieval, unidentified object. The gilt front is convex and the reverse flat with a concavity which may been central. A flange along side is apparently complete. Extant length, width and thickness 15.1, 11 and 3.7mm. 12th - 14th century. Field GL
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-FF8A36
Object type: SPOON
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman copper alloy spoon. The round-sectioned stem is badly distorted but complete, and comes to a point at the proximal end Immediately before a lunular offset to the missing bowl the stem is engraved on its front and sides with closely spaced chevrons and transverse grooves. Extant length 127mm. Mid 1st - 4th century. Field GL
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-FF5B42
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy round, biface, 1 guinea coin weight of William III, in abraded condition. Obv. laureate bust facing right, legend illegible. Rev. crown / 1 / GVINEA / W Diameter 19.8mm. Thickness 3mm. Weight 7.35g / 113.5 grains (guinea = 129.5 grains). 1694 - 1702. Field WG3
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-FF1BDE
Object type: WEIGHT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval or post-medieval lead weight, very roughly finished, tapering irregularly cylindrical with a median hole. Probably for use with a line or net but possibly for ¾ ounce troy. Length or height 13mm. Diameter 17 - 19mm. Hole diameter 7 - 8mm, weight 22.97g / 0.7385oz. Field WG3
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-FEEB18
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy double-looped buckle frame, both loops oval, with a D-sectioned pin. Length and width 35.5 and 24mm. Mid 14th - 15th century. Field WG3
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-FE96D5
Object type: ANIMAL BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy crotal bell with a drilled loop, iron pea, and engraved gadroon ornament on both halves. A small part of the lower half is missing. Diameter 24.9mm. Height 31.5mm. Mid 16th - 17th century. Field SH3
Created on: Sunday 28th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of NMS-DD1715

Record ID: NMS-DD1715
Object type: HORSESHOE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval iron keyhole horseshoe. The frog is keyhole-shaped and there are no calkins, toe clip or fullering. The shoe is slightly dished on one side. The number and location of the nail holes cannot be determined due to corrosion. Circa 17th to mid 18th century.
Created on: Saturday 27th June 2015
Last updated: Saturday 27th June 2015
Spatial data recorded.


  • Thumbnail image of NMS-DAB1B4

Record ID: NMS-DAB1B4
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Clipped and pierced (behind crown) silver penny of Charles I. Obverse: bust facing left 'I' behind, legend: CAROLVS D G M B F ET H REX. Reverse: oval shield with royal coat of arms, legend: IUSTITIA THRON[VM FIRMAT]. Initial mark illegible. Mint unknown. Die axis 9 o'clock. 1625-1649 AD.
Created on: Friday 26th June 2015
Last updated: Saturday 27th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D8FAC7
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy trapezoidal strap loop with internal projections and a sub-rectangular knop in the centre of the top. There are file marks on all surfaces. 20.3 x 18mm. 13.5mm internally. c.1150 - c.1260. Field SH2
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D8DF6B
Object type: BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a clapper bell in silvery copper alloy, with very little extant below the very poorly cast suspension loop. There is rust on the inner and outer faces but no certain trace of a crown staple. Extant height 27mm. Width of loop 17.5mm. Mid 16th - 18th century. Field SC
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D8B161
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Just over half of a post-medieval tin-coated copper alloy double-looped buckle frame, both loops trapezoidal. Close to Whitehead 2003, nos. 512 and 513. Estimated length 41mm. Width 21.4mm. c.1620 - c.1680. Field SC
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D89A83
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Distorted medieval copper alloy double-looped buckle frame, both loops oval. Length and width 25 and 18.5mm. Mid 14th - 15th century. Field SC
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D88599
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy D-shaped or oval buckle frame. The bar, sides and outside edge are thicker than they are wide (the latter, for example, is 2mm wide and 4.1mm thick). Length and width 17.9 and 29.2mm. Late 13th - mid 15th century. Field SC
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D8676E
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy tongue-shaped strap end formed from two sheets secured by two rivets. There are two shallow rounded cut-outs at the attatchment edge. The sides taper gently towards the outside edge on which there is a small rounded knop. Some textile survives between the sheets. Length 31.9mm. Width at the attachment edge 13.5mm, at the outside edge 10mm. 14th century. Field SC
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D7F1D1

Record ID: KENT-D7F1D1
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1301-1310. Calss 10 ab. North number 1038.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D7BC06

Record ID: KENT-D7BC06
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1280. Probably class 2a. North number 1014.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D77DB4

Record ID: KENT-D77DB4
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1301-1310. Calss 10 ab. North number 1038.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D75604

Record ID: KENT-D75604
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1301-1310. Calss 10 ab. North number 1038.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D72CB3

Record ID: KENT-D72CB3
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward I. Minted in London, c. AD 1280. Probably class 2b. North number 1015.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D70527
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy biface square coin weight for a half sovereign of Henry VIII and "issued during the reigns of Elizabeth I or James I" (Withers and Withers 1995, 24). An enthroned king on one face, and a crown above X above s on the other. 15 x 14 x 3.5mm. Weight 6.00g / 92.4 grains. The half-sovereign weighs 96 grains (ibid. 14 and 68). 1558 - 1625. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D6EC7B

Record ID: YORYM-D6EC7B
Object type: BLADE
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy object, probably a blade, of post-medieval date. The object comprises a sub-triangular blade with a narrower rectangular neck which has a circular perforation for attachment. The upper edge is folded over, as is the lower edge of the rectangular perforation. These folds would have aided with the over all stability of the object. The metal has a mid-green patina and is worn. The object is 30.4mm long, 13.2mm wide, 5.7mm thick and weighs 3.1g.
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D6E32C

Record ID: YORYM-D6E32C
Object type: VESSEL
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a cast copper alloy vessel of medieval date. The fragment is part of the leg of a cooking vessel such as a cauldron. The leg is roughly ovate expanding outward to the top where it would have joined with the vessel proper. The front of the object is decorated with two parallel vertical grooves creating a ribbed effect. The reverse is slightly concaved and undecorated. The metal has a mid-greenish-brown patina and is worn. The fragment is 51.4mm long, 53.9mm wide, 24.1mm thick and weighs 115g. While it is not possible to allocate this fragment to a specific type it is lik…
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D6B03C
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy hooked book mount with a fish-tail terminal and a sheet backplate attached by three rivets, two of which pass through an expanded terminal which mirrors in a simplified form the fishtail. The sides taper slightly towatds the hook. Decoration is confined to a single median groove. Length 31mm. Width at terminal 15.5mm, before the hook 7.3mm. 16th century. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D68E93
Object type: ROWEL SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval to post-medieval copper alloy six-pointed spur rowel. At their springing the points are of hexagonal cross-section. Three are complete. Diameter 30mm. Thickness 3mm. Central hole diameter 4.5mm. 15th - 18th century. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D675AC

Record ID: YORYM-D675AC
Object type: WEIGHT
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead weight or spindle whorl of uncertain date. The object is circular with a flat base and top, rounded edges, and has a central perforation running through it. All surfaces appear undecorated and are worn. The metal is a light brown colour. The object is 27mm in diameter, 6mm thick and weighs 22.9g. The perforation is 9mm in diameter. Lead spindle whorls and weights were commonly used from the Iron Age through to the post-medieval period and are difficult to date with any certainty without supporting archaeological context. The function of such objects is also difficult …
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D671F9
Object type: PURSE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Less than one half of a medieval copper alloy purse bar with two attachment holes through a flange, engraved zig-zag probably once inalid with niello, and a truncated conical terminal knob. Ward-Perkins Type A1 or A2. Extant length 52mm. c.1450 - c.1500. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D655D7

Record ID: YORYM-D655D7
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead spindle whorl of medieval to post-medieval date. The spindle whorl is bi-conical with a central perforation running through it. The object is heavily abraded rendering any decoration illegible. The metal is a dark brown colour and is worn. The spindle whorl is 26.9mm in diameter, 11.5mm thick and weighs 18.9g. The perforation is 9.2mm in diameter. Lead spindle whorls were commonly used from the Iron Age through to the post-medieval period and are difficult to date with any certainty. Decorated examples are thought to date to the medieval to post-medieval periods while…
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D63A83
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval gilt copper alloy harness pendant with the lower part missing, probably circular, convex and hollow-backed, with two small patches of gilding but no decoration remaining. Extant height and width 31 and 26mm. 12th - 13th century. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D60D54
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval copper alloy buckle: probably rectangular frame surviving only as the bar with stumps of the sides; trapezoidal sheet plate with slight frame recesses, pin hile, one rivet and decoration comprising a very finely engraved saltire between two transverse wavy lines of finely executed interrupted rocker-arm engraving giving the appearance of tiny addorsed triangles, one line next to the pin hole, the other at the inside edge. Plate length and width 24.4 and 14 - 12.8mm (the rear part 23.2 and 12 - 11.5mm). 14th century. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D5FE58

Record ID: KENT-D5FE58
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver long cross Penny of Edward III. Treaty series c. AD 1363-1369. Minted in London, North Number 1264.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D5F7B8

Record ID: YORYM-D5F7B8
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead spindle whorl of medieval to post-medieval date. The spindle whorl is bi-conical with a central perforation running through it. Both surfaces are decorated with repeating raised ridges radiating from the central perforation. Each resulting cell bears a single pellet. The metal is a mid-brown colour and is worn. The spindle whorl is 27.8mm in diameter, 14.5mm thick and weighs 44.2g. The perforation is 10.3mm in diameter. Lead spindle whorls were commonly used from the Iron Age through to the post-medieval period and are difficult to date with any certainty. Decorated e…
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D5D285
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Badly crumpled medieval to post-medieval gilt copper alloy mount in the form of six-pointed, wavy-armed star with the stumps of a pair of integral rivets or spikes on the hollow reverse. One speck of gilding remains. Cf. a smaller mount from a belt (NMS-9A0BE5) and a larger one that probably decorated a wall or ceiling (NMS-D2F875). Width c.35mm. 15th - 16th century. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D5CE06

Record ID: YORYM-D5CE06
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy brooch of Roman date. Only a small portion of the object remains and is extremely worn. The fragment is sub-triangular with a slight projecting lip to the upper edge and terminates in a bulbous knop to the other. The metal has a mid-green patina and is extremely worn. The brooch is 21mm long, 12.6mm wide, 6.7mm thick and weighs 5.2g. The fragment is likely to be from a Trumpet brooch though the degree of wear makes this difficult to ascertain with any certainty.
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D57713
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Saxon to post-medieval sub-conical lead spindle whorl. Diameter 27 - 28mm. Height / thickness 14mm. Hole diameter 9-10mm. Weight 52.36g. 11th - 16th century.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D575EB
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Small fragment of a Late Saxon copper alloy tongue-shaped openwork strap end of Thomas 2004, Class E, Type 1 or possibly 2. Both ends are broken, one across the start of a split end or recess for a separate bar, the other across two rounded apertures. On one face two curving longitudinal grooves run between the holes. Extant length 14.8mm. Width 23mm. Thickness 1.5mm. 10th - 11th century. Field L10
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-D4FC06

Record ID: CORN-D4FC06
Object type: COIN
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Silver cut half of a voided long cross penny of Henry III (1216-1272), Long cross coinage (1247-1272), without sceptre, Class IIIb with large pellets to beard and no colon between X and III in obverse legend, moneyer Henri, London mint, Spink 1363.
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D4F965

Record ID: YORYM-D4F965
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy headstud brooch of Roman date. The head of the brooch is comprised of rectangular wings the reverse of which act as a double lug hinge mechanism though the axis bar and pin no longer remain. The front of the wings are extremely worn and undecorated. An integral D-sectioned bow extends centrally from between the wings and tapers in width to a worn break. A perforation is present at the apex of the bow through which a separate headstud is fitted. The metal has a mid-green patina and is worn. The brooch is 30mm long, 20.1mm wide, 8.7mm thick and weighs 11.6g.…
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-D4F09A

Record ID: CORN-D4F09A
Object type: PENDANT
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy horse harness pendant in the form of a quatrefoil frame surrounding a cruciform pendant. The cruciform has moulded grooves on all sides of the central square which holds a domed stud which is circular in plan (3 mm in diameter) and cylindrical in profile (6 mm long), but bent at the back. The crucifrom is held within the frame by a pin that crosses transversely through the arm of the pendant and the upper apex of the frame. The quatrefoil frame has a pointed knop between each arch, in each external angle. The frame terminates in a circular suspension loop that is stil…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-D4EB49

Record ID: CORN-D4EB49
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy coin weight for the Louis d'Or, a gold coin with the value of 10 francs issued from 1640-1709, and known in England as the 'pistol' from the French pistole (Withers, 1995, 47). This coin weight is a mule as it does not have the bust of Louis XIV on the obverse, but instead the intials 'S.K' which refer to the founder, Samuel Kerison (Withers, 1995, 52). The Initials 'S.K' are seen as part of the die struck design on the W1133 (pistole) and the W1134 (half-pistole). Samuel Kerison was the son of John Kerison, Shocklach, Cheshire, a gentleman. He was bound to Daniel Ho…
Created on: Friday 26th June 2015
Last updated: Sunday 28th June 2015
Spatial data recorded.


  • Thumbnail image of WAW-D4D61B

Record ID: WAW-D4D61B
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (10th to 11th century possibly) possible pin fragment. The copper alloy pin has a rectangular sectioned head, which is rectangular in profile as well. The lower portion of the head has a slightly waisted section as decoration. The shaft of the pin is slightly narrowed, square in section and has a broken terminal. The break is slightly stepped and is obliquely angled, but is covered by the same mid green patina that covered the surface of the pin. At the upper edge of the pin head there are small patches of red copper corrosion. The pin measures 32.09mm long, 5.62mm wide,…
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-D4D589

Record ID: CORN-D4D589
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Copper farthing of Charles II (1660-1685), which were minted between 1672 and 1679, but the date on the reverse is too corroded to make out. Spink 3394.
Created on: Friday 26th June 2015
Last updated: Sunday 28th June 2015
Spatial data recorded.


  • Thumbnail image of CORN-D4D13F

Record ID: CORN-D4D13F
Object type: BUTTON
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast lead alloy button, circular in plan and domed in profile, with a central raised pellet with nine spokes emanating from it, which terminate in a circular border that runs around the edge of the button, to create the appearance of a wheel. Between each spoke is a single pellet, just within the circular border. The back of the button has a moulded line that crosses the diameter of the button which is the base of what was probably a simple looped shank in the centre. Read (2005) illustrates a similar solid lead alloy button on page 101, no.398, which is dated from the 16th…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D4BFA7

Record ID: YORYM-D4BFA7
Object type: MOUNT
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy strap loop belt mount of medieval date. The mount is trapezoidal in plan with an integral attachment rivet projecting centrally from the shorter edge. The mount is undecorated though the outer end of the loop is slightly pointed. The metal has a dark green patina and is worn. The mount is 13.6mm long, 12.9mm wide, 4.2mm thick and weighs 1.4g. Similar mounts can be seen in Egan and Pritchard, p.232, fig.147.
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D4BA53

Record ID: YORYM-D4BA53
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval buckle plate made of copper alloy. It is formed from a sheet of copper alloy folded over to make two plates of unequal size. The buckle frame, strap bar and pin are all missing. The upper plate is rectangular. There are three round rivets which are arranged in a triangle pattern. At the buckle end, the plate narrows to form a tongue from which has been cut a central rectangular aperture. The fold in the sheet is part way along this tongue and half way along the aperture. The sheet would have been folded around buckle strap bar with the pin sitting in the aperture. On the r…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D49B89

Record ID: YORYM-D49B89
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy buckle of medieval date. The buckle is a single looped D-shape with a lipped frame and a narrowed and recessed strap bar. The lip is notched for the pin. The pin no longer remains. The metal has a dark green patina and is worn. The buckle is 17.1mm long, 16.1mm wide, 2.7mm thick and weighs 1.4g. Similar examples are illustrated in Whitehead p.20 and are dated to circa AD 1350 - 1450.
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D48FD5

Record ID: YORYM-D48FD5
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval double loop buckle made of copper alloy. This loops are asymmetrical, with one oval shaped loop and one rectangular loop separated by a central strap bar. The rectangular loop has six lobed knops on the outside edge of the frame, separated by grooves. The oval loop has one projecting knop at each of the two outer corners of the frame. There is also a knop projecting from the frame in line with both ends of the central strap bar. The pin is not present. The frame and strap bar are sub rectangular in cross section. The upper surface of the buckle appears to have been fil…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D46F2E

Record ID: YORYM-D46F2E
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval copper alloy single loop buckle. The frame is D-shaped with a narrowed and offset strap bar. The frame is undecorated. It is oval in cross section. The pin is present. It is formed from a round sectioned copper alloy wire looped around the strap bar. It narrows towards a point and survives to full length. The buckle plate is also present. It is formed from a sheet of copper alloy folded around the strap bar to form two plates of equal length. The space between the two plates is filled with compact soil. The faces of the plates are undecorated and have no rivet holes. At the…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D407C9
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval gilt copper alloy oval buckle frame, distorted and with most of the offset, narrowed bar missing. The widened outside edge is straight in the centre, cf. Whitehead 2003 but with a narrow pin notch. One speck of gilding remains. Length c.27mm. Width c.44mm. 13th - 14th century. Field JH3
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D3E7DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy double-looped buckle frame, both loops oval, with a slight rib at the ends of the bar. 21.7 x 17.6mm. Mid 14th - 15th century. Field JH3
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D39AFC

Record ID: YORYM-D39AFC
Object type: COIN
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Styca of Eanred dating to the period AD 810 - 840. Moneyer name around cross reverse type. Moneyer Monne. Mint of Northumbria. North Vol 1, p.71, no.186.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D393D8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy shoe buckle chape with an iron spindle, "cooking pot" shaped but with sharp angles at the straight inside edge. Length and width 24.6 and 32.5mm. c.1690 - c.1720. Field JH3
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D376FC

Record ID: YORYM-D376FC
Object type: COIN
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A silver sovereign penny of Henry VII dating to the period AD 1485 - 1509. Royal shield over long cross with keys below reverse. Mint of York under Archbishop Rotherham. North Vol 2, p.103, no.1728/9.
Created on: Friday 26th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D3600F

Record ID: YORYM-D3600F
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval single loop buckle made of copper alloy. The frame is oval shaped with a small lip protruding for the pin. The frame is undecorated. The upper surface has been flattened producing a bevelled appearance to the outer edge. The frame has an integral forked spacer. The join between the loop and spacer is not off-set but there is a diagonal notch at either side of the spacer where it meets the loop. One fork survives to its original extent whereas the other is broken off close to the loop. The break is worn. A few millimetres away from the loop the upper and lower surface of ea…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D345AA

Record ID: YORYM-D345AA
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval buckle made of copper alloy. The frame is asymmetrical with an oval loop, a central bar for the pin, and a smaller round loop for the strap. The oval frame is roughly oval in cross section. The outer edge of the loop features a thickening forming small lip with a central groove for the pin. Either side of this thickening is a raised ridge of alloy with runs across the top of the loop and down the outer face. The inner edge of the loop is wider, appearing like a square block with spur projecting at either side. A central constriction of the block holds the pin which is prese…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D32801

Record ID: YORYM-D32801
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval single loop buckle made of copper alloy. The frame is D-shaped, with a lipped frame and an offset strap bar. It narrows in thickness from one side to the other. The loop is sub D-shaped in cross section with an upper bevelled edge. The strap bar is square in cross section. The frame is undecorated. There is a single notch for the pin which is in line with the point of the lip. The pin is present and appears to retain its full length although it has been bent and now points off to one side of the frame. The pin is made of a roughly round section length of copper alloy wire w…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D30A10

Record ID: KENT-D30A10
Object type: VESSEL
Broad period: ROMAN
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman course ware vessel. The vessel has been broken in to sherds and re-assembled by the finder. It is of a fine dark grey to black fabric of sandy silt. It is highly fired and appears to have been oxidised. It is difficult to assess the inclusions due to the reconstruction but they appear to be abundant inclusions of well rounded and well sorted sand. The vessel is in the form of a jar with a flat base and conical body. There are indented shoulders and a beaded rim. The surface has been lost due to sea erosion so it is not possible to determine whether or not the jar w…
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D304AA

Record ID: YORYM-D304AA
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval single loop buckle made of copper alloy. The frame is circular and round in cross section. It is undecorated but does have a constriction for the pin. The pin is present. It is made of a roughly round sectioned length of copper alloy wire which is looped around the buckle frame and tapers towards a point at the other end. The buckle frame is not a perfect circle and is irregular in thickness. There is a thickening at one side of the pin constriction. This does not appear to be decorative so could be a manufacturing defect. There is no evidence for surface decoration. The bu…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of KENT-D30418

Record ID: KENT-D30418
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval green glass bottle with a cork stopper. The bottle is thought to be of a 'Mallet' type dating from the early 18th Century. It is circular in plan with a depressed base, sometimes described a onion shaped. This has elongated neck with a ribbed collar surrounding the mount. The cylindrical stopper is still in place and appears to be made of cork. The bottle is 155mm high, 140mm at widest diameter and weighs 600g.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D2EBB2
Object type: PIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Roman copper alloy hair pin in very dented condition, a slightly flattened globular head with the stump of a shank. Diameter 13mm, extant length 11mm (head only 10mm). Mid 1st to 4th century.
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D2E525

Record ID: YORYM-D2E525
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An Early-Medieval single loop buckle made of copper alloy. The buckle frame is D-shaped with a narrowed and offset bar. The loop is substantial, thickens towards the outer edge, and is D shaped in cross section. It is undecorated. The strap bar is very thin and rectangular in cross section. Where the frame meets the strap bar it terminates in zoomorphic knops which are most probably crude representations of animal heads confronting across the bar, as seen on better examples of this type of brooch. There is no evidence for surface decoration. The buckle has a patina of dark grey with l…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D2D729
Object type: HARNESS MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy, flat, lozengiform harness mount with a lozengiform aperture, scalloped edges and a pair of integral ovoid-sectioned attachment spikes on the reverse. Length and width 18.6 and 11.5mm. Thickness (excluding spikes) 1mm. 17th century. Field JG3
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D2C7C1

Record ID: YORYM-D2C7C1
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle made of copper alloy. The buckle frame is oval with a narrowed and offset strap bar. The loop itself is oval in cross section and the bar has a round cross section. The loop of the buckle frame is undecorated. There is no evidence of surface decoration. The pin is not present. The buckle loop is not symmetrical, it has a greater offset at one side than the other. The buckle has a mottled green patina with some patches of white. It measures 14.63mm x 12.29mm x 2.34mm. It weighs 0.91g. Other examples of this type of buckle are published in Egan an…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D2A9B5
Object type: WEIGHT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval to post-medieval lead standing weight probably for 1½ ounces avoirdupois, conical and of octagonal cross-section with a transverse perforation just below the apex. Height 31.5mm. Width 17mm. Weight 41.30g / 1.4570oz. 14th - 17th century. Field FLO15
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D2961C
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete open brace from a medieval to post-medieval copper alloy skillet or posnet with some sooting. The arms meet at an angle of 70 degrees. At their broken ends there is no part of the handle or wall. One arm is much thicker than the other (7.7 x 7mm as opposed to 5.9 x 4.1mm). Weight 20.62g. 14th - 17th century. Field FLO15
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D28FC9

Record ID: YORYM-D28FC9
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle made of copper alloy. The buckle frame is oval with a narrowed and offset strap bar. Both the loop and the bar are round in cross section. The outer loop of the frame is substantially widened and is decorated with three rounded knops, each separated by a transverse ridge set between two grooves. The central knop had a scratch on the upper surface which is thought to represent where the pin rested. The pin in present. It is formed from a circular sectioned length of copper alloy wire looped around the strap bar and tapering to a point at the other…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D26CFA

Record ID: YORYM-D26CFA
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle made of copper alloy. The buckle frame is oval with a narrowed and offset strap bar. Both the loop and the bar are round in cross section. The outer loop of the frame is decorated with an angular knop at either end. Between them sits a roller. The pin is not present. There is no sign of surface decoration. The buckle frame has a dark grey patina. On the roller and the reverse there are patches of green corrosion. Corrosion around the roller means its outline is indistinct in places and it no longer articulates. This object measures 20.53mm long …
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D2646D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy double-looped buckle frame, both loops oval. Length and width 29.3 and 24.2mm. Mid 14th - 15th century. Field FLO15
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D2503A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing token of Yarmouth Corporation, Williamson 285ff, further details illegible, 1667-9
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D24A46

Record ID: YORYM-D24A46
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle made of copper alloy. The buckle frame is oval with a narrowed and offset strap bar. The loop itself is oval in cross section and the strap bar has a round cross section. The outer loop of the frame is decorated with rounded knops flanking a series of transverse grooves and ridges. This includes a central groove where the pin would have rested. The pin is not present. At either end of the strap bar there is round knop with a ridge on the bar side. There is no sign of surface decoration. It has a dark grey patina with patches of brown where soil i…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of NMS-D23A88

Record ID: NMS-D23A88
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
'Gunmoney' crown of James II, a gun metal halfcrown restruck as a crown, weight 13.56g, produced after 15th June 1690 and probably not after July of that year
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D22D1B

Record ID: YORYM-D22D1B
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle made of copper alloy. The buckle frame is oval with a narrowed and offset strap bar. The loop itself is oval in cross section and the strap bar has a square cross section. The outer loop of the frame is decorated with rounded knops flanking two transverse ridges. There is a central groove where the pin would have rested. The pin is not present. The frame has been damaged causing it to become bent out of shape. No surface decoration is visible. It has a green patina with areas of brown where soil is adhering, especially in the grooves formed by th…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-D20B0A
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Silver halfgroat of Elizabeth I, Tower, coronet initial mark, North 1999, 1567-70
Created on: Friday 26th June 2015
Last updated: Friday 26th June 2015
Spatial data recorded.


  • Thumbnail image of YORYM-D1CE61

Record ID: YORYM-D1CE61
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval single loop buckle made of copper alloy. The buckle frame is D-shaped with a narrowed and offset strap bar. The loop itself is oval in cross section and the strap bar has a round cross section. The outer loop of the frame features a central groove to hold the pin. This is formed by two raised bars of metal running across the width, with a groove between them and one at either side. The pin is not present. The frame is not symmetrical. The strap bar is set to the right hand side of the loop (looking from the front with groove at the top). This is most likely a manuf…
Created on: Friday 26th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded.


  • Thumbnail image of HAMP-C27489

Record ID: HAMP-C27489
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Post-Medieval copper alloy double-oval buckle frame with moulded surface decoration dating to the period 1550 - 1650. The frame consists of one loop with axis bar and one small stub which would have extended into the other loop. The upper surface of the remaining loop is decorated with moulded curvilinear ribs and barrel moulding at the centre of the outer edge, either side of which scrolling decoration extends into a scrolled knop in each corner. The top and bottom edges each have a mo