Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type: 2881

  • Thumbnail image of SOM-495A14

Record ID: SOM-495A14
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-medieval silver groat of Philip and Mary (1554 - 1558). Initial mark Lis (unclear). Mint of London. North (1991:129) no. 1973. This coin is very worn with a large bend upwards at 6 and 10 o'clock of the reverse side and a further bend downwards with a large chip between 5 and 7 o'clock. The coin has a width of 21.6mm and weighs 1.21g.
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'Yeovil CP', grid reference and parish protected.


  • Thumbnail image of NLM-491E2E

Record ID: NLM-491E2E
Object type: SWORD BELT
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy possible sword belt fitting fragment, as kindly suggested by the finder. One end from a cast plate with curved and engrailed end, and with a dimple behind its end. Faint traces of curvilinear incised probably vegetal ornament appear on the display side. Fiercely abraded. Suggested date: Post-Medieval, 1500-1650. Length: 22.7mm, Width: 18.4mm, Thickness: 2.3mm, Weight: 3.22gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
No spatial data available.


  • Image not taken

Record ID: SOM-49152A
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy, post-Medieval, quartefoil mount with three integral rivet spikes on the back. The mount is an openwork cross fleuret in shape with a centeral lozenge. There is a diamond shape in the middle from which the incised cross radiates from each of its 4 points. The four foils are shaped ike petals with the centre of them removed in a trefoil petal shape. The front is dark grey in colour with bits of corrosion. The back is flat and plain. Two outer spikes project outwards from the reverse protruding from each end of the central bar. A third central spike is placed between these…
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'Yeovil CP', grid reference and parish protected.


  • Thumbnail image of NLM-490BAD

Record ID: NLM-490BAD
Object type: SPOON
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy spoon fragment. A cast elongated oval or leaf-shaped spoon bowl, broken from the stem at its proximal end, and retaining extensive traces of white metal plating. The finder kindly cites Roman WILT-2E4F64 as a parallel; however this example lacks the 'rat tail' continuation of the stem noted on the Wiltshire object. The use of both copper alloy and white metal plating may suggest this to have been made after metalworkers' craft guilds had lost the power to prevent the manufacture of spoons in white or yellow metals which might be passed off as being of better materials. Sug…
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.


  • Thumbnail image of SUR-490628

Record ID: SUR-490628
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A silver long cross penny of Edward I (1272-1307), Class 9b, dating to 1300. Exeter mint. As North no. 1037/1.
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded.


  • Thumbnail image of NLM-48FCC4

Record ID: NLM-48FCC4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle fragment. The cast offset strap bar of a small buckle frame clasped by a folded rectangular sheet metal plate of thickness 0.9mm. An off-centre rivet hole of diameter 1.3mm appears towards the inner end of the plate on one side. A small oval hole by the frame was presumably to permit a pin [now lost] to protrude. Suggested date: Medieval, 1250-1400 Length: 27.8mm, Height: 14.8mm, Thickness (overall as found): 3.5mm, Weight (with trapped soil): 2.87gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.


  • Thumbnail image of NLM-48EEBD

Record ID: NLM-48EEBD
Object type: BRACELET
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy bracelet fragment. A small segment from the cast plano-convex section band of a bracelet of estimated internal diameter c.100mm with alternating rounded drum-shaped segments and plainer sunken zones between them. The rounded segments bear traces of closely-spaced longitudinal grooves. Broken at both ends and fiercely abraded. The finder kindly cites LANCUM-F0B515 as a similar find of Middle Bronze Age date. The beaded form of bracelet also appears throughout the Iron Age, though rarely bearing the transverse decoration observed here. Suggested date: Middle Bronze Age,1600-…
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.


  • Thumbnail image of NLM-48E1A6

Record ID: NLM-48E1A6
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead spindle whorl. Cast plano-convex whorl with a tapered moulded aperture of diameter 9.5-10mm, Walton Rogers form A1; heavily patinated and abraded. The spindle hole size would admit an Anglo-Scandinavian date while its mass would permit this to be used to spin a yarn. Suggested date: Early Medieval, 850-1000 Diameter: 26.7mm, Thickness: 7.1mm, Weight: 21.25gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.


  • Thumbnail image of NLM-48D479

Record ID: NLM-48D479
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin, as kindly suggested by the finder; if so, probably a radiate indeterminate, later Roman issue of 260-296. A battered, encrusted and perhaps partly-melted flan retaining scant discernible detail on either side. From its size, probably a radiate or nummus indeterminate, later Roman issue of 260-410 Obverse description: possibly radiate head right - this detail only from a magnified and re-processed photograph. Diameter: 20mm, Weight: 2.69gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-48CA09

Record ID: NLM-48CA09
Object type: BROOCH
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy and glass brooch fragment. A curled fragment from one end of a costume jewellery brooch in the form of tendrils or ribbons studded with the round settings for four paste stones, of which a single facetted clear white glass example remains. A coiled spring is retained on the back of the broader part. Suggested date: Post-Medieval to Modern, 1875-1925 Length: 15.6mm, Height: 15.1mm, Thickness (clear of pin gear and stone): 2mm, Weight: 1.12gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-48BD56

Record ID: NLM-48BD56
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy thimble. A small domed or conical thimble with a slightly everted plain foot ring, and with the rest of its wall occupied by finely machine-stamped circular pits which appear as if stamped in horizontal rows. The top is occupied by a rectilinear grid or lattice of larger indentations. Suggested date: Post-Medieval, 1850-1900 Diameter: 15.2mm, Height: 13.7mm, Thickness (wall, at base): 0.8mm, Weight: 2.55gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-48AF11

Record ID: NLM-48AF11
Object type: DOOR FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy lock fitting. A small cast escutcheon, of keyhole shape with opposed lugs just above its mid-point, and with the stub of a possibly iron pin upon which this presumably turned at its rounded end. An inner border is casually inscribed on the display face. Presumably for a small casket or cupboard lock. Suggested date: Post-Medieval, 1500-1800 Height: 21.6mm, Width: 10.7mm, Thickness (clear of pin): 2.7mm, Weight: 2.47gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-48A4AA

Record ID: NLM-48A4AA
Object type: AWL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy awl, as kindly identified by the finder. A rod, of round section and diameter 3.7mm towards one end, and of square section at the other - the latter part is complete, and 30mm long. The tip of the round section part is turned over or broken. The squared end would have passed into a solid wooden handle like a whittle tang. Suggested date: Post-Medieval, 1700-1900 Length: 66.6mm, Weight: 5.74gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-489977

Record ID: NLM-489977
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead weight. Cast rectangular weight, with hollows in one larger flat side perhaps suggesting it was cast in an open mould. Patinated. The mass may suggest this to have represented one averdepois ounce. Suggested date: Post-Medieval, 1500-1700 Length: 20.2mm, Width: 15.6mm, Thickness: 10.5mm, Weight: 28.29gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-487980

Record ID: NLM-487980
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy mount. Cast concavo-convex lentoid mount with the stub of an integral fixing pin set centrally in its hollow back. White metal plating appears on the convex display face. Suggested date: Post-Medieval, 1500-1700 Length: 23.9mm, Width: 11.8mm, Height (i.e. protrusion): 4.6mm, Thickness (wall): 1.7mm, Weight: 3.16gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-486F5C

Record ID: NLM-486F5C
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy mount. Cast sub-triangular plate with a curved convex display face, probably knopped at its narrower end, and with a pair of integral prongs of length 6.3mm projecting from the back, now both bent in the same direction. Suggested date: Post-Medieval, 1500-1650 Length: 18.2mm, Width: 8.8mm, Thickness (clear of pins): 1.8mm, Weight: 1.17gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-486491

Record ID: NLM-486491
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy mount. Cast trapezoid plate with the stubs of a pair of integral fixing pins projecting from the back, the better-preserved being 5mm long. Abraded. Presumably fixed to leather. Suggested date: Post-Medieval, 1500-1700 Length: 21.8mm, Width: 13.0mm, Thickness (clear of pins): 1.3mm, Weight: 2.34gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-4859C6

Record ID: NLM-4859C6
Object type: HINGE
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy hinge strap. A straight-sided plate with a pointed outer end and with a pair of lugs at its inner end which are rolled to retain the spindle from a hinge [lost], with a space between them for a counterpart. A pair of drilled fixing holes of diameter 1.8mm are set on the centre line of the plate. Probably from a light item of furniture or a box; slightly thicker towards the hinge. Suggested date: Modern, 1900-1940 Length: 37.3mm, Width: 16.9mm, Thickness: 0.9mm, Weight: 3.96gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-484B2E

Record ID: NLM-484B2E
Object type: DISH
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Glass of a greenish tint, possible dish fragment. A shard from the rim of a small round glass dish with a serrated edge, perhaps a small ashtray, or the stand for a cruet set. The form is probably moulded. Suggested date: Post-Medieval, 1850-1900 Length: 16.6mm, Width: 11.3mm, Thickness: 4.8mm, Weight: 1.21gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


  • Thumbnail image of NLM-483D0B

Record ID: NLM-483D0B
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy vessel repair. A sub-rhomboid fragment of sheet metal of thickness 0.6mm, folded crisply back on itself twice at either end to form a repair clip to mend a split in the wall of a wooden vessel. Suggested date: Post-Medieval, 1500-1800 Length: 33.7mm, Width: 15.4mm, Thickness (overall): 3.2mm, Weight: 4.84gms
Created on: Friday 20th September 2019
Last updated: Friday 20th September 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 857,240
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,298,108
  • Mean quantity: 1.521
  • Maximum: 52,504

Filter your search

1 - 20 of 857,240 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.