Record ID: WREX-EF7644
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Wrexham
Workflow stage: Awaiting validation
Circular lead alloy weight or possible gaming piece of probable post-medieval date (c. 1600-1800AD). The object is crudely decorated on one side with what appears to be a figure 8 covered with apparent random stab or peck marks.  The reverse of the object is plain.  There is some post-depositional damage on part of the upper edge of the object, which has a powdery white patina. Measurements: Diameter: 26.6mm; thickness: 6.5mm; weight: 27.59g
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: WREX-EF5F70
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Complete but worn silver coin, probably an Elizabeth I (1558-1603AD) halfgroat, with an uncertain initial mark, date is possibly 1582-1603AD. Obverse has traces of a crowned bust left but little of the legend is legible […] B RE […]. Reverse has a squared shield on long cross fourchée, dividing the legend […] / TAS / LON / […]. Measurements: Diameter: 17.1mm; thickness: 0.5mm; weight: 0.87g; Die axis: 9
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: WREX-EF49CD
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Complete silver penny of Elizabeth I (1558-1603AD) second issue with a long cross initial mark dating 1580-1581AD. Obverse has worn crowned bust left with the legend E D G ROSA SINE SPINA. Reverse has a square shield on long cross fourchée, dividing the legend CIVI / TAS / LON / DON. Measurements: Diameter: 15.0mm; thickness: 0.3mm; weight: 0.44g; die axis: 2
Created on: Tuesday 16th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-E91184
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable buckle plate fragment. A trapezoid sheet metal fragment, straight-sided, with a large [diameter 4.5mm] if slightly ragged hole at its broader end, where it is broken. This hole may be the end of a slot or hole for the putative buckle pin and is larger than a rivet-hole. Two rivets of diameter 3mm pass through the plate on either side of this hole. There is a diagonal row of three low bosses at the middle of the plate, raised by stamping from behind. Before this, a rocker-work pattern of two adjacent saltires had been added to its display side. Close-spaced diagona…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-E8F72E
Object type: BROOCH
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. A small cast Hod Hill brooch, possibly Mackreth type HOD HILL 1.b1. The stubs of a rolled-over wing remains on one side and is met by a broad flat upper bow with a single central longitudinal ridge. The lower bow is constricted with an oval expansion at its end. Fiercely abraded. Suggested date: Early Roman, 50-70 Length: 25.6mm, Width: 13.7mm, Thickness (crest of bow): 3.2mm, Weight: 2.48gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-E8DD76
Object type: STRAP END
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap end. A strap end of composite construction with two plates of thickness 0.9 and 0.4mm with a central probably forked spacer plate between them whose tip projects at the outer ogival end. The inner end is lightly engrailed. A rivet of diameter 1.7mm passes through the inner end to attach the plates to each other and the strap. A woven fabric strap remains preserved between the plates – the finder kindly notes he had kept the object wet to preserve what was at first thought to be a leather strap, as the find-spot was also damp. The use of a textile strap may deno…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E8C368
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Body sherd of medieval Grimston ware pottery, reduced with thick external lead glaze, weight 3g, 14th - 15th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E8BE9D
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Possible buckle plate fragment. A trapezoid fragment of cast copper alloy sheet with faint horizontal lines at its wider end and with an impressed slot at the other narrower end. Folded. A tiny aperture close to the edge at the wider end might be a tiny [diameter 1mm] rivet hole or fortuitous damage. Folded and abraded. Suggested date: Medieval, 1250-1400 Length: 14.5mm, Width/Height: 18.7mm, Thickness (sheet): 1.2mm, Weight: 1.67gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E8A471
Object type: NAIL
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead possible nail fragment. An oval fragment with a dimpled boss on its underside, here suggested to mark the location of a shank formerly sheathed in lead. Patinated. Similar objects from the vicinity retain parts of iron shanks which in this case is thought to be lost. Suggested date: Post-Medieval, 1600-1800 Length: 18.7mm, Width: 13.6mm, Thickness (at boss): 7.1mm, Weight: 5.22gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E89A43
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Sherd of medieval Grimston ware pottery, narrow strap handle with two stabbed round holes, reduced with oxidised surfaces, abraded, with no extant glaze, weight 17g, width 33mm, 13th - 15th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E8877D
Object type: DISC
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy disc. Milled disc. Presented as a possible coin approaching post-medieval farthing size, but retaining no detail to confirm this suggestion. Suggested date: Post-Medieval, 1700-1900 Diameter: 21.3mm, Thickness: 1.3mm, Weight: 3.36gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E86B60
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. A small cast spectacle or double looped buckle frame with expanded outer edges, each with a nick to serve as a pin rest, and with a small knop at either end of a constricted central strap bar . The frame is bent outwards from the strap bar. Suggested date: Post-Medieval, 1500-1650 Length: 23.6mm, Height: 17.9mm, Thickness: 2.1mm, Weight: 2.23gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E86948
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Two body sherds of medieval Grimston ware pottery, both reduced and with external lead glaze, one with a brown slip trail, weight 5g, 13th - 15th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E84488
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead metalworking debris. A small droplet of solidified lead melt, patinated. Suggested date: Unknown, Roman to post-Medieval, 43-1800 Length: 21.7mm, Thickness: 6.3mm, Weight: 6.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E7FB06
Object type: BOOT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy boot fragment. A flat cast and probably pressed metal curved component, flanged on the inner side of its curve, probably from the heel of a work boot with metal inserts or attachments. This interpretation is suggested by the form, and by four drilled holes of diameter 2.5mm equidistantly distributed along the flange, which would have enabled the object to be incorporated into the layers of a stitched sole. Suggested date: Post-Medieval, 1800-1900 Length: 41.3mm, Width: 10.5mm, Thickness: 3.1mm, Weight: 5.87gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E7DED1
Object type: MOUNT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. A cast rectangular plate which has been bent to penannular form. A series of incised chevrons appear on the outer side, though with a zone along one edge of the series undecorated. Probably originally of annular form with a butted seam, now partly flattened. Abraded. A function as a binding might be implied by the annular form. Suggested date: Medieval, 1200-1400 Length (as found): 19.5mm, Width: 7.4mm, Thickness: 1.5mm, Weight: 2.35gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E7C68F
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Pottery.  A fine sandy reduced fabric with a broad oxidised outer margin; body sherd from a vessel of estimated diameter 190mm at the point in its wall whence this fragment comes. Suggested date: Medieval, 1200-1350 Width: 66.5mm, Weight: 34.16gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WMID-E7A7A4
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete Medieval silver penny of Edward I (AD 1272-1307). Long cross reverse. Trifoliate crown. Probably class 3cd, dating to AD 1280. Bristol mint. Part of the outer flan is missing, resulting in some of the legend missing.  North vol.2, no. 1018/19.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E7A4C8
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy unidentified object. A narrow straight-sided strip with a drilled rivet hole of diameter 1.7mm towards one end and possibly broken across a further hole at the other. The rivet hole may hint at a medieval date. A function associated with a strap or as a strap fitting might be implied by its narrow form. Suggested date: possibly Medieval, 1250-1400 Length: 29mm, Width: 6.6mm, Thickness: 0.7mm, Weight: 0.77gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E78736
Object type: NAIL
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead and iron fragment. The expanded head and the stub of the shank of an iron nail with a head sheathed in lead, probably to retard its corrosion. Suggested date: Post-Medieval, 1600-1800 Diameter (long axis): 18.8mm, Height: 8.1mm, Weight: 4.43gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WMID-E76A8E
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete Medieval silver penny of Edward I (AD 1272-1307). Long cross reverse. Bifoliate crown. Probably class 10cf, dating to AD 1305-1310. Canterbury mint. 
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E75798
Object type: JETTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy jetton. Milled Nuremburg jetton, probably issue of 1586-1635, folded with obverse innermost. Obverse description: probably central rosette surrounded by three crowns alternating with three lis Obverse inscription: possibly [---]NVR[--] Reverse description: Reichsapfel. Diameter: 20.8mm, Weight: 0.67gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E72EA6
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy unidentified object. A rectangular sheet metal plate with a series of closely spaced [8 per cm] fine grooves of length 15mm extending from one straight edge, and with faint traces of grooves and a split in the opposite side. Probably for a craft usage. Marks of this form on bones have been associated with the making of pins, on ‘pinner’s bones’, though at a larger scale. Similar close spacing is also seen on comb teeth, so this object might have figured in the cutting of comb teeth – small one-piece bone combs for beards and moustaches are known fro…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E705DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible buckle fragment. A part of what is taken to be the cast spacer plate from a buckle of composite construction, retaining the inner edge of a small single loop and a prong – presumably one of a pair. The lack of a hole for the pin might suggest that the spacer has broken across that aperture or may hint that the spacer was part of a strap end rather than a buckle. Suggested date: Late Medieval, 1350-1450 Length: 19.1mm, Width: 8.1mm, Thickness (at loop): 3mm, Weight: 1.47gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E6E0CA
Object type: PENKNIFE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Iron and copper alloy penknife fragment. Two iron blades and possibly another implement for a folding knife, retained between fragmentary flat plain copper alloy side plates of thickness 0.7mm by long rivets – whether one or two is now uncertain. A flat oval plate with faint traces of cross-hatching marks the end of the knife handle. Side plates of bone or ivory would have been secured outside the copper plates which remain and would have butted up to the end plate. The object has been exploded by the expansion of its corroding iron blades. Suggested date: Post-Medieval, 1800-190…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E6CC68
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A mall cast copper-alloy Medieval single-loop D-shaped buckle with a slightly expanded front edge with a notched pin rest. The strap bar is narrowed and recessed.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E6CAF3
Object type: PIN
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy pin. A small pin with a tapered square-section shank and an expanded integrally cast globular head. This might alternatively have functioned as a rivet. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 17.1mm, Diameter (head): 4.7mm, Weight: 0.74gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E6BAEC
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A cast copper alloy double looped post medieval buckle with rounded sides and small knops at either end of the strap bar. A pointed copper alloy pin is retained.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SUR-E6A66E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A cast copper alloy double looped post medieval buckle with zoomorphic terminals at either end. From one end projects a simplified bird's head in the form of a trefoil and on the other end there is a flaring triangular bird's tail with a transverse ridge. There are small knops at either end of the strap bar.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E6A4D9
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable vessel fragment. Cast plano-convex section fragment from a cauldron leg with a pronounced moulded rib on its outer side, flat behind. Raggedly broken at both ends of its short remaining extent. This might suggest multiple casting flaws, the vigorous dismantling of an object for recycling, or recurrent plough-strike damage - pot legs are robust objects and this pattern of breakage is unusual. So too, for a cauldron leg, is the lack of sooting - though black spots were observed on the magnified views achieved during image processing, so this could have been part of …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E68855
Object type: RING
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy ring. A cast oval ring of rounded oval section. Slightly curved in profile. Suggested date: Post-Medieval, 1500-1800 Length: 33.3mm, Width: 25.0mm, Thickness/Diameter: 2.7mm, Weight: 3.57gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E67C13
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Surrey
Workflow stage: Awaiting validation
A flint axehead of Neolithic date, 133mm in length, struck from a mottled grey flint and bifacially worked. The axehead is symmetrical on two axes and has a lenticular cross section, flaring smoothly to a rounded cutting edge 58.7mm wide. There is a large area of damage to the front edge which may be post depositional in origin. There are no areas of polishing. A patch of white cortex is retained at the centre of one face.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E66B8A
Object type: CAME
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead window came fragment. A short length of cast H-section window came with a trapped fragment of dark degraded glass at one end on one side. Patinated. This came would have permitted the setting of two small adjacent panes. The glass is reverting to its constituent ingredients, which is a feature of a medieval ‘forest’ glass made using potash, rather than the more robust soda glasses of earlier and later times. The width of the slot suggests a thickness of c.2.5mm for the panes. The reporting of window came of medieval date among field finds is remarkably rare. Suggested …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E64FA1
Object type: DISC
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead disc. A small lead disc, probably cast as a border appears on one side, with a narrow lug or sprue projecting from one edge, damaged at the opposite edge. Patinated. Suggested date: Unknown, Medieval to Post-Medieval, 1200-1800 Length: 17mm, Width/Diameter: 13.9mm, Thickness: 1.4mm, Weight: 1.55gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E5C035
Object type: VESSEL
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel repair patch. A twice sharply folded sub-rectangular sheet metal patch of thickness 0.6mm, used to repair a split in the wall of a wooden vessel of an estimated diameter exceeding 110mm. The flanges or flaps formed by the second folding of the patch are now worn and tattered. Suggested date: Post-Medieval, 1500-1700 Length: 44.4mm, Width: 18.3mm, Thickness (overall): 3.6mm
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E59D2E
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Cast vessel leg with a single central longitudinal rib on its outer side and with a flat to slightly concave back. Tapered slightly towards a flat base; broken raggedly across the top. There is only a slight trace of sooting on the ribbed side, which might suggest this object to have been detached from an item of formal tableware such as a ewer rather than from a cauldron. Suggested date: Medieval, 1250-1350 Length: 50.9mm, Width: 29mm, Thickness: 8.1mm, Weight: 48.37gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUSS-E59744
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Awaiting validation
A retouched flint flake of suggested middle Neolithic to early Bronze Age date c. 3300-1000 BC.  The secondary flake is elongated and sub-triangular in plan and cross-section; a small section of cortex surviving at the distal edge which has a chip at the terminal with fresh breaks suggesting more recent damage. The ventral surface is slightly concave with a pronounced bulb of percussion and raised rippling suggested hard hammer working. The dorsal surface has five removal scars with crude removals at the proximal end, possibly damage, but some finer …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E592A1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Possible copper alloy coin, either an irregular radiate or nummus on a small flan or a Theodosian nummus, further details illegible, c.AD275-402
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E58102
Object type: COIN
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Farthing of George II (1727-1760), issue of 1730-1754, worn. Obverse description: bust laureate cuirassed left Obverse inscription: [---] II REX Reverse description: Britannia seated left holding sprig aloft, exergual line Diameter: 23.1mm, Weight: 4.83gms, die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E565DA
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A fragment of cast lead sheet of structural gauge with a roughly textured underside [as cast] suggesting manufacture of the sheet using a sanded surface. This is the mark of a professional scheme of casting work. One or two adjacent edges are cut; the object has subsequently been partly melted. Patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 59.7mm, Width: 35.3mm, Thickness: 4.4mm, Weight: 67.78gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E52CC6
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A rectangular fragment of lead sheet which has been cut on all sides, folded or rolled, lightly grooved or scratched in one direction; now patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 25.2mm, Width (as found): 16.5mm, Thickness (sheet): 2.4mm, Weight: 15.89gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E5109C
Object type: WEIGHT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead weight. A small weight made by hammering an oval droplet of solidified lead melt leaving the imprint of the hammer-blow visible on one side, and then piercing a conical hole at a projecting lug from the same side. Patinated. Presumably for use with a fishing line. Suggested date: Medieval, 1200-1500 Length: 21.7mm, Width: 14.4mm, Thickness: 4.4mm, Weight: 7.75gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WREX-E5007C
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Incomplete silver groat of Henry VIII (1509-1547AD) third coinage, third bust, London (Tower) mint, dating 1544-1547. Obverse has crowned bust right and the legend […]DI GRA AG[…] Reverse has a squared shield on long cross fourchée, dividing the legend, POSVI […] Measurements: Diameter: 21.2mm; thickness: 0.5mm; weight: 1.14g; die axis 4
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E4F454
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead possible spindle whorl. Cast globular or bun-shaped whorl with opposed flat sides and with a slightly off-centre square moulded aperture of c.8mm square; patinated, with a cut by the hole on one side which might represent a tying notch. The thick patina points to an object of some age. If indeed a whorl – the square hole would be an aberrant feature – the spindle hole size would fall between the ranges accepted for earlier and later parts of the early medieval period. Whorls in other materials acquired lathe-turned globular forms from about the 13th century, which migh…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E4D553
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus of the House of Valentinian (364-378), Emperor right, Reece period 19. Possible traces of silver wash on reverse. Obverse description: bust diademed right Reverse description: possibly Emperor advancing right holding labarum and dragging captive; trace of silver wash. Reverse inscription: possibly [GLORIA ROMANORVM] Diameter: 15.6mm, Weight: 1.17gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E4B669
Object type: COIN
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. From its size probably a milled farthing, Post-Medieval issue of c.1672-1804 but retaining no clearly discernible detail on either side. The object has probably been burnt. Diameter: 21.5mm, Weight: 3.20gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E4ADE6
Object type: BRACELET
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A bent fragment of a Roman copper alloy bracelet or armlet, 4mm wide with a flat cross section. The exterior is divided into panels by deeply incised transverse lines, each panel with an oblique line running across it diagonally with a pair of offset notches, one to each side. The angle of the diagonals alternates creating a zig-zag effect. The bracelet appears to have been intentionally cut to respect the edges of the panels at either end and has been bent around, possibly for re-use as a finger ring. There are traces of a white metal coating.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: WREX-E4A8D2
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Silver sixpence of Elizabeth I (1558-1603AD), second coinage, with a lion initial mark, dating 1567 (North 1997). Obverse has the crowned bust left, with a rose behind the head and the legend ELIZABETH DG ANG FR ET HI REGINA. Reverse has a squared shield on long cross fourchée, dividing the legend POSVI DEV ADIVTOREM MEV with the date 1567 above. Measurements: Diameter 34.2mm; thickness: 0.6mm; weight: 2.72g; die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: OXON-E48DC1
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Published
A fragment from a copper alloy Roman Colchester derivative large south-western T-shaped brooch of Hull T139, dating to c.AD 50-150. The brooch is missing its foot and pin. The wings of the brooch are 25.73mm wide and are cylindrical with a maximum diameter of 4.89mm at the bow and narrowing slightly towards their tips. Their front faces are decorated by a double incised line placed close to their outside edges. Both outside edges are open-ended, revealing a hollow core containing a dark brown coloured material that may be remains of solder. The right hand terminal …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E48632
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Cast vessel leg of thin rectangular section at the top, where it is broken, and expanded and thickened at a flat-based foot of wedge-shaped profile. Two shallow longitudinal grooves appear on the outer side of the leg; the back is flat. Traces of sorting, thicker on the outer side, suggest the vessel saw use on a hearth. Suggested date: Medieval, 1200-1500 Height (in use): 42.6mm, Width: 36.6mm, Thickness (at foot): 16.3mm, Weight: 69.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E46953
Object type: SPUR
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A post-Medieval cast copper alloy spur hook. The object has a narrow hooked arm to attach to an eye of the spur terminal, with flanking lobes half way down and a lozengiform rear terminal. This is drilled to take a rivet with a domed and teardrop-shaped head acting as an integral rove to attach to the leathers. Circa 16th-17th century.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E4660E
Object type: AMMUNITION
Broad period: MODERN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible anti-aircraft shell fragment. A shard from the slightly everted rim of a cylindrical object vessel of estimated diameter 80mm with iron staining at the top; shattered at either side and along its lower edge. The pattern of catastrophic damage might point to a shard from an exploded anti-aircraft shell, which would be consistent with its suspected diameter. The iron staining may alternatively indicate this object had a place in an assembly of iron or steel parts intimately associated with or enclosed by a thick [5.5mm] copper alloy casing – a definition which…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUR-E43F44
Object type: FINGER RING
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A fragment of a copper alloy Roman finger ring, comprising a raised oval bezel, 8.2mm long and 3.3mm high, with a deep setting for a now lost stone or intaglio. The bezel rises from the line of the hoop which has a flat cross section and triangular shoulders which are waisted at the junction to the bezel and which taper into the hoop. The shoulders are decorated with transverse ridges. Cf. Guiraud's (1989) Type 3 (later 2nd to later 3rd century AD) or Henig's (2007, 13) Type VIII (3rd century AD).
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E43C9D
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment, as kindly identified by the finder. A small cast tongue-shaped cauldron or pipkin leg, of plano-convex section, fiercely abraded, chipped on one edge and sooted on its outer side from use on a hearth. Suggested date: Medieval, 1200-1500 Length: 25.6mm, Width: 19.8mm, Thickness: 6.9mm, Weight: 13.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WREX-E42BB4
Object type: SPUR
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper-alloy rowel spur of Post-Medieval date, c.1600 – 1800AD. The spur consists of an ovate sectioned neck which splits to one end forming the rowel box. The rowel is now missing. The curved arms with a D-shaped section. Both arms have been bent and distorted, but each terminate with a pair of button-headed rivets. The spur has a mid-green patina and is worn. Measurements: Length:80.2mm, width10.3mm; thickness: 5.5mm; weight: 36.35g
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Prees', grid reference and parish protected.

Record ID: SUR-E41FBE
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
A Roman cast copper alloy brooch of Colchester Derivative Polden Hill type, dating to c. 75-175 AD. The wings are cylindrical, open on the underside and have angled end-caps which are drilled to take the spindle on which the spring and pin is mounted. The front of the brooch has a small projecting lug for the spring chord. The bow has a flat cross section and is angled at 90° to the head. The apex of the bow has three square recessed cells retaining traces of red enamel, set within a moulded rectangular panel. Behind this is a small ridged collar to the lower part of…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E3ED4E
Object type: DAGGER
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy dagger. Cast dagger hilt incorporating short opposed quillons angled in a shallow S-shape when viewed in plan springing from a rounded central block with a central trapezoid slot for a narrow thick V-section blade [7.3mm by 12.7mm], and with a shell or fan-shaped projection from one other side of the central block and a moulded rib on the last side opposite the latter. The block and quillons are decorated by deeply incised chevrons with a field of angled cuts on both sides; three deep cuts also confer texture on the upper surface of the fan-shaped element. Suggested date: …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NMS-E3DE98
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver groat of Richard III, London, initial mark sun/rose, North 1679, weight 2.99g, little wear, 1483-5
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E3C94D
Object type: SEAL
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
Lead bag seal. Cast disc with a slot in its edge and an opposed bifurcated slot, to function as a drawstring bag closure. Both sides bear the central motif of the Pelican in its Piety, the brand mark of Earles Cement Co. Partial legends on both sides read: [EAR]LES LIMITED. Patinated. Suggested date: Modern, 1900-1950 Diameter: 21.1mm, Thickness (at edge): 7.5mm, Weight: 10.07gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.

Record ID: NLM-E3A1B2
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Tealby penny of Henry II (1154-1189), issue of 1158-1180, as kindly identified by the finder. Obverse description: bust left, sceptre before face. Legend at edge of flan not deciphered. Reverse description: cross potent with a crosslet in each angle. Initial cross potent. Reverse inscription: +hENRI.ON:S:[--] Diameter: 20.1mm, Weight: 1.38gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E39636
Object type: KNIFE
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Iron strip, perhaps the blade from a knife. It is 120mm long and one end is encased in delaminating corrosion. Away from this end, it is generally around 19mm wide, with one edge straight and 3mm thick, tapering to the other edge which may represent the cutting edge. The end without the corrosion layers has the cutting edge curving up to meet the back of the blade in a rounded point. The corroded end is broken and has no evidence of a whittle tang. The strip is now bent at a slight angle about halfway along its length. It weighs 45.0g. The identification as a knife is very t…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E388CA
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. Cast bar mount with a central concavo-convex boss wih incised horizontal grooves and opposed rounded lobes for attachment, one retaining a rivet of diameter 1.2mm and length4.4mm. Suggested date: Late Medieval, 1350-1400 Length: 19.4mm, Height (i.e. projection): 3.6mm, Weight: 1.71gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E36935
Object type: RING
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Neatly circular iron ring, 51.5mm in diameter. In cross-section it is circular, 8mm in diameter. It weighs 31.8g. The ring was found close to several early Anglo-Saxon objects and is likely also to be of that date. It may have been used as a suspension ring.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E359C3
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Radiate indeterminate, probably a later Roman irregular barbarous radiate of 275-285, Reece period 14. The finder kindly notes the appearance of cut corners and suggests a possible use as a ring bezel, albeit coin-type features appear on both sides. Obverse description: radiate head right. Reverse description: looks like a head right with blundered legend. Reverse inscription: [--] ROV Diameter: 14.7mm, Weight: 0.67gms, die axis: possibly 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E340B0
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny, probably clipped and certainly folded [in the same ‘open’ manner as NLM-E29D79 but with reverse outermost], probably of Henry V (1413-1422), York mint, possibly North no. 1403 Obverse description: facing bust with wide bifoliate crown whose ornaments may touch each other, cinquefoil/mullet to left of crown Reverse description: long cross, three pellets in each angle, central quatrefoil Reverse inscription: CIVI/TAS/EBO/[RACI] Diameter: 17.3mm, Weight: 0.86gms, die axis: probably 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E3383A
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation
Fragment of late Iron Age copper-alloy D-shaped terret, now very corroded but perhaps originally enamelled. It has a sub-circular or slightly oval upright collar terminal 13.7mm wide, 12.1mm tall and 4.8mm thick. From one side of this projects a triangular-section upper ring, with a flat inner and an angled outer. On the other side of the collar, at its base, is a stub of the attachment bar which shows that this was rectangular-section, 6.5 x 3.4mm, and set vertically. The overall length is 21.0mm and it weighs 7.34g. All surfaces of the fragment, including the breaks,&…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E31CD6
Object type: COIN
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Rose farthing of Charles I (1625-1649), probably Spink no. 3203, Rose Type 3, issue of 1625-1643 Obverse description: arched crown with sceptres passing through its band, lower ends of sceptres cross inner circle. Mintmark possibly Mullet or star of five points Obverse inscription: CAROLVS.D.G.M[--]BRI Reverse description: crowned rose, large crown. Reverse inscription: FRA:ET.hI.[--] Diameter: 14.0mm, Weight: 1.15gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E30159
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy button. Cast plano-convex discoid button with a moulded eight-armed left hand spiral or impeller motif with a central pellet and a billeted border on its front, and with an integrally cast and drilled shank. Suggested date: Post-Medieval, 1650-1750 Height: 16.3mm, Diameter: 13.9mm, Weight: 3.97gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E2E439
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Probably a round long cross halfpenny or penny, issue of 1280-1483, York mint, very worn Obverse description: facing bare shouldered bust, tall probably bifoliate crown, inner circle – the latter possibly duplicated by double striking. Legend lost. Reverse description: long cross, three pellets in each angle Reverse inscription: CIVI/T[AS/EBO/RACI] Diameter: 16.3mm, Weight: 0.73gms, die axis: probably 3
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E2C22A
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny of Edward I (1272-1307) class 4c issue of 1282-1289, possibly from a hoard with NLM-E29D79, so submitted to Treasure process, ref. TBC Obverse description: facing bust with wide trifoliate crown with nicked band left, drapery of angled wedges, long face with pointed chin, initial cross potent. Obverse inscription: +EDW R’ ANGL’ DNS hYB Reverse description: long cross, three pellets in each angle. Reverse inscription: .CIVI/TAS/LON/DON Diameter: 18.7mm, Weight: 1.32gms, die axis: 5
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E29D79
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny, probably of Edward II (1307-1327), probably class 10cf5 issue of 1307-1310, folded with obverse outermost. Possibly from a hoard with NLM-E2C22A, so submitted to Treasure process, ref. TBC Obverse description: facing bust with wide bifoliate crown with curved band; initial cross pattee. Obverse inscription: +[E]DWAR [?]ANGL DNS hYB Reverse description: long cross, three pellets in each angle. Small lettering. Reverse inscription: [CIVI/TAS/LON/DON] Diameter: 18.4mm, Weight: 1.25gms, die axis: probably 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E28024
Object type: COIN
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
Copper alloy coin. Milled farthing of Charles II (1660-1685), dated 167?4 Obverse description: bust laureate cuirassed left. Obverse inscription: CAROLVS A CAROLO Reverse description: Britannia seated left, contracted pose. Date in exergue: 167?4 Reverse inscription: BRITAN NIA Diameter: 22.4mm, Weight: 4.99gms, die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
No spatial data available.

Record ID: NLM-E268F4
Object type: COIN
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Milled halfpenny of George III (1760-1820), dated 1799, third issue, Birmingham mint. Obverse description: small bust laureate draped right. Obverse inscription: GEORGIUS III DEI GRA [--]R[-] Reverse description: Britannia seated left holding sprig aloft. Date – 1799 – in exergue Reverse inscription: [BRITANNIA] Diameter: 30.4mm, Weight: 11.82gms, die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E24B41
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Minim. Nummus, possibly of the House of Valentinian (364-378) or possibly later still, small module Victory left, possibly Reece period 19. If so, possibly Arles mint. Obverse description: small bust diademed right Reverse description: Victory advancing left. Reverse inscription: possibly [SECVRITAS REI PVBLICAE] In exergue: possibly COS Diameter: 11.5mm, Weight: 1.04gms, die axis: probably 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D47080
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantine I, Trier, reverse VICTORIAE LAETAE PRINC PERP type, mintmark *//[pellet]STR, RIC VII, 221, AD319
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D448FD
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Theodora, Trier, reverse PIETAS ROMANA type, mintmark illegible, AD337-41
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D43913
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constans, Trier, reverse VICTORIAE DD AVGG Q NN type, mintmark leaf//[...], AD341-8
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D42A5B
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantine I, Lyons, reverse GLORIA EXERCITVS 2 standard type, mintmark [pellet-in-crescent], AD330-5
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D40FBC
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy radiate of Tetricus I, reverse PAX AVG derivative, weight 2.13g, die axis 7, c.AD275-86
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D3E1D5
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Silver denarius of Hadrian, Rome, reverse TELLVS STABIL, RIC II, 276d, little wear, weight 3.15g, AD134-8
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SUSS-D3C544
Object type: COIN
Broad period: ROMAN
County: West Sussex
Workflow stage: Awaiting validation
A worn Roman copper alloy barbarous radiate imitating an issue of an uncertain ruler dating to AD 275-285 (Reece period 14). Illegible reverse. Uncertain mint.
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D383C3
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy dupondius of Hadrian, Rome, reverse VIRTVTI AVGVSTI, RIC II, 605f (drapery at far shoulder), light wear, weight 12.36g, AD119-21
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D36646
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy farthing of Charles I, crude legends and long cross initial mark, 0.45g, c.1625-34
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NARC-D32B93
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
A complete silver Roman Republican denarius serratus of Q. Antoninus Balbus, dating to the period 83 - 82 BC (Reece Period 1). D/Q∙ANTO∙BALB/PR reverse type depicting Victory in quadriga, right, holding reins and palm-branch in left hand and wreath in right hand. Mint of Rome.  Diameter: 18.74mm, Weight: 3.5g RRC p. 389, no. 364/1c.
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SOM-D322BE
Object type: GAMING PIECE
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation
A lead alloy probable gaming piece of Medieval to Post-Medieval or date (410 - 1700 AD). The object is of a flattened, smooth lead ball that although is difficult to date, most likely dates to the Roman to Post Medieval period. Measurements: Diameter: 15.66mm, thickness 8.47mm, Weight: 8.76g.
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D321AE
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver penny of John, short cross class 5c, moneyer Goldwine of Canterbury, well worn, c.1207-10
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NARC-D31571
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy contemporary native copy of an As of Claudius I (AD 41-54). (Reece Period 2). Reverse type depicts Minerva advancing right, /S//C in left and right fields. Diameter: 23.72mm, Weight: 4.2g The coin is missing portions of its outer flan. Many copies of Claudian period asses were struck in Britain in the decades following the invasion of AD 43. This was because there was a serious shortage of small change for the up to 50,000 or so Roman soldiers in the Province to use. It is now reckoned that many of these coins were in fact semi-official, be…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SOM-D31159
Object type: SHOT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A lead alloy shot / ball of probable Post-Medieval or Early Modern date (1600-1800 AD). Likely from a pistol. The shot is spherical and of a grey white colour. Musket balls are discussed in Courtney's "Small Arms Accessories of the Mid-Seventeenth Century" (1988) and on page 202 of "Material Culture in London in an Age of Transition" by Geoff Egan (2005). Measurements: Diameter: 12.77mm, Weight: 13.82g.
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

Record ID: SOM-D30CFE
Object type: SHOT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A lead alloy shot / ball of probable Post-Medieval or Early Modern date (1600-1800 AD). Likely from a pistol. The shot is spherical and of a grey white colour. Musket balls are discussed in Courtney's "Small Arms Accessories of the Mid-Seventeenth Century" (1988) and on page 202 of "Material Culture in London in an Age of Transition" by Geoff Egan (2005). Measurements: Diameter: 18.8mm, Weight: 35.14g.
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

Record ID: SOM-D30933
Object type: SHOT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A lead alloy shot / ball of probable Post-Medieval or Early Modern date (1600-1800 AD). Likely from a pistol. The shot is spherical and of a grey white colour. Musket balls are discussed in Courtney's "Small Arms Accessories of the Mid-Seventeenth Century" (1988) and on page 202 of "Material Culture in London in an Age of Transition" by Geoff Egan (2005). Measurements: Diameter: 17.08mm, Weight: 32.87g.
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

Record ID: SOM-D303A7
Object type: SHOT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A lead alloy shot / ball of probable Post-Medieval or Early Modern date (1600-1800 AD). Likely from a pistol. The shot is spherical and of a grey white colour. Musket balls are discussed in Courtney's "Small Arms Accessories of the Mid-Seventeenth Century" (1988) and on page 202 of "Material Culture in London in an Age of Transition" by Geoff Egan (2005). Measurements: Diameter: 19.16mm, Weight: 37.42g.
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D30121
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver penny of Edward III, florin type, London, reversed Roman Ns on obverse, lombardic on reverse, Type 4, North 1116, worn, 1344-51
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NARC-D2F7E0
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation
A complete copper alloy sestertius of Commodus dating to AD 190. Reece period 9. LIBERAL AVG VII P M TR P XV IMP VIII COS VI S C reverse type depicting Liberalitas, draped, standing left, holding abacus in extended right hand and cornucopiae in left hand. Mint of Rome. Diameter: 29.86mm, Weight: 16.9g RIC Vol III, No 563.
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NARC-D2E9A3
Object type: VESSEL
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A complete copper alloy pot leg, from a cauldron, posnet or skillet of Medieval to Post Medieval date (AD 1200-1600). The object consists of the leg and foot and is broadly rectangular in cross section and L-shaped in profile.  The upper edge is recurved with both sides on the outer edges of which are circular apertures. The upper surface is decorated with a double central moulded rib that runs the length of the recurved portion, the lower projecting foot is decorated with two raised transverse lines. Cast copper alloy vessels were widely used…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SOM-D2E0D1
Object type: CHAPE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
 A small, conical copper alloy sheet metal dagger scabbard chape of medieval to early post medieval date (c 1300 -1500 AD). The chape has been made of a single piece of metal which has been cut and folded to join at an overlapping seam along the reverse. Some ddecoration exisits at the top opening of the chape consisting of two incised lines running parallel to each other around the circumfurance  of the chape, within which are two small circular motifs. 
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

Record ID: NMS-D2D067
Object type: ARROWHEAD
Broad period: BRONZE AGE
County: Norfolk
Workflow stage: Awaiting validation
Almost complete barbed and tanged arrowhead of Green. H, S, (1980) type Sutton b, closest in outline to examples i and j (page 122, fig. 45), of off-white patinated flint with the numerous small inclusions within the flint a mid-grey colour, one face has three small spots of rusty iron, probably from contact with agricultural machinery. One barb is nearly complete; possibly the tiny tip is missing, the other barb is chipped at the tip, this is an ancient break as one of the iron stains is on the surface of the break, the tang is broken obliquely but would have been little longer than t…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NARC-D2CEFB
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Pin of Early-Medieval date (AD 700-800). The object is composed of a sub-rectangular flat head plate with an integral circular sectioned shaft projecting from the lower edge of the head. The upper edge of the head plate is broken and abraded. There is a raised circumferential collar at the junction between the plate and shaft. The lower end of the shaft tapers to a sharp point. The head plate is decorated with a design in relief composed of am interlace motif with gilding retained within the recessed portions. The back of the head plate is undecorated,…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D2C402
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
About half of the flat circular frame of an early Anglo-Saxon copper-alloy annular brooch, with an original diameter of c. 40mm. One break is across a neat rounded hole in the frame. This may be the pin hole, but on the reverse there is solder around the hole and it may possibly alternatively be a repair. There is also some iron corrosion on the reverse here, which could be from the pin. The frame is otherwise well preserved here, and at 6.1mm wide appears to retain its original width. The inner edge is 1.2mm thick and it tapers towards the outer edge which is 0.6mm thick. Th…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SOM-D2A313
Object type: COIN
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A Medieval silver cut half penny of Henry III (1216-72) dating to AD 1249 to 1250. Long cross class 3c. Minted by Nicole at either London, Canterbury or Winchester. North (1994, 226) no. 988. 
Created on: Monday 15th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'North Curry', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D1F2A7
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Constantine (one of the three Caesars), reverse GLORIA EXERCITVS 1 standard type, mintmark illegible, AD335-7
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.