Record ID: NLM-2C2FAA
Object type: DISC
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead disc. A small thin patinated lead disc, frayed. Suggested date: Post-Medieval, 1600-1900 Diameter (long axis): 23.2mm, Thickness: 1.4mm, Weight: 3.48gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-2A2BC1
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead probable spindle whorl. Cast cylindrical whorl with a central moulded aperture of diameter 11.6mm, Walton Rogers form B. A possibly moulded design has been partially carried over to one flat side only, unless these irregularities represent shrinkage in an open mould, and lipping appears on the opposite side. Patinated, and probably lightly distorted. The mass points to a primary function plying cord, if not as a flywheel for some other mechanical purpose. The size of spindle hole could admit an Anglo-Scandinavian date, but the possible decoration on one side might rather point to …
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-29F789
Object type: SHOT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead shot. Cast ball, flattened by impact against a hard flat lightly corrugated surface. Patinated. The mass may suggest this to have been fired from a light fowling piece or ‘rook and rabbit’ gun. Suggested date: Post-Medieval, 1700-1800 Diameter: 12.8mm, Weight: 8.57gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-29EC9E
Object type: SHOT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead shot. Two cast balls, both flattened or splattered by a close-range impact against a hard flat surface; a previous example has been recorded from the vicinity. Patinated. The mass may suggest both were fired from a light fowling piece or ‘rook and rabbit’ gun. Suggested date: Post-Medieval, 1700-1800 Weight: 10.38gms and 12.89gms; Combined Weight: 23.28gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-292B05
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead metalworking debris. Five small scraps of melt and foil, the latter of thickness 1.1mm. Patinated. From over a wide area. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Combined Weight: 13.75gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

Record ID: NLM-28F75E
Object type: BULLET
Broad period: MODERN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead bullet. Cast pointed bullet, probably copper jacketed for a rifle, with a circumferential medial groove and a basal hollow of diameter 2.7mm. Suggested date: Modern, 1900-1950 Length: 36.2mm, Diameter: 7.8mm, Weight: 9.49gms Finder’s reference: Roxby cum Risby SE9156013738 [field centre
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

Record ID: NLM-19AF0E
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A thin scrap of cast lead sheet of thickness 3.1mm, with cut edges, a deep knife cut on one side, and an open crosshatch of similarly deeply incised lines on the other. Patinated. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 32.4mm, Width: 8.8mm, Thickness: 3.1mm, Weight: 6.22gms
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: LVPL-15CF62
Object type: PIPE TAMPER
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
A complete cast lead pipe tamper of post-medieval date (c.AD 1620-1900). The Object depicts a figure standing with both arms falling by the side however one is slightly raised. One leg has a more pronounced boot cuff, and the figure is wearing a long coat, the object is heavily worn so all other detail is lost. The figure stands on an oval shaped based. The object has a grey and cream patina and is heavily pitted. Dimensions: Length 40.1mm, Width 14.5mm, Thickness 9.9mm, Weight 9.72g.
Created on: Monday 25th March 2024
Last updated: Monday 15th April 2024
No spatial data available.

Record ID: WMID-15C835
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead discoidal spindle whorl of Early Medieval to Medieval date (AD 700-1100). The spindle whorl is circular in plan and has a sub-rectangular cross section. It fits into the Walton Rogers classification form B. The central hole is circular with an internal diameter of 9.5mm. No decoration is present on either side.  The whorl is cream in colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail. Measurements: diameter 31.8mm, thickn…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: WMID-15AB31
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete lead spindle whorl of possibly early Medieval to Medieval date (AD 800-1100). The object is plano-convex in shape with a domed side, rounded edges and a flat base with a central perforation measuring 10mm in diameter. It fits into the Walton Rogers classification Form A1. No decoration is present on either side.  The whorl is brown in colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail. Measurements: diameter 35.1mm…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: WMID-158431
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead spindle whorl of possibly early Medieval to Medieval date (AD 800-1100). The object is plano-convex in shape with a domed side, rounded edges and a flat base with a central perforation measuring 9mm in diameter. It fits into the Walton Rogers classification Form A1. No decoration is present on either side.  The whorl is cream in colour, with an even surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original surface detail. Measurements: diameter 28.5mm, t…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: LVPL-156C66
Object type: MOUNT
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
Cast lead bar mount of post-medieval date (c.AD 1500-1900). The object is flat and rectangular in both plan and section. The face of the object is slightly concave and has rectilinear grooves, likely from casting rather than decoration. There is a circular rivet hole on each ned of the mount. The reverse is slightly convex and undecorated. Dimensions: Length 57.7mm, Width 19.6mm, Thickness 4.1mm, Weight 34.32g. A similar post-medieval bar mount on the database can be found at: LANCUM-C169A2
Created on: Monday 25th March 2024
Last updated: Monday 15th April 2024
No spatial data available.

Record ID: WMID-154D92
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete lead spindle whorl of possibly early Medieval to Medieval date (AD 800-1100). The object is plano-convex in shape with a domed side, rounded edges and a flat base with a central perforation measuring 7.6mm in diameter. It fits into the Walton Rogers classification Form A1. No decoration is present on either side. A small semi-circular chunk is missing from its side. The whorl is cream in colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the ori…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: LVPL-14ECD4
Object type: GAMING PIECE
Broad period: MEDIEVAL
County: Bury
Workflow stage: Awaiting validation
A lead gaming piece or possible weight of uncertain date (c.AD 43-1700). The object is in the shape of a die, having six faces, however it has no rings or dots to denote values, suggesting it could instead be used as a weight rather than gaming. Dimensions: Height 11.7mm, Width 10.4mm, Depth 11.8mm, Weight 14.41g.
Created on: Monday 25th March 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: PUBLIC-00872C
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A probably Post Medieval cast lead anthropomorphic weight in the form of a human face. Sub-oval in plan and flattened hemispherical in form. The face is relief moulded with  a raised brow, oval eyes and a protruding nose. The mouth is only partially visible due to probable post depositional damage to the chin. The reverse has similar scuff damage but is otherwise plain and flat. The surface displays a light buff / grey colour. Length 56.5mm, width 44mm, thickness 21.2mm, weight 202g (6.8 oz) Broadly similar examples on this database at; SOMDOR-B02DB3 HESH-513062 and YORYM-FE22C7
Created on: Sunday 24th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded. This findspot is known as 'Near Sandwich', grid reference and parish protected.

Record ID: LIN-D88896
Object type: WEIGHT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast lead and iron Roman steelyard weight dating to c.AD 43-410. A bi-convex lead weight with evidence of iron at one terminal. Originally an iron rod would have passed through it and the uppermost would have housed a separate iron loop. Patinated.  Height: 37.98 mm, Width (waist): 22.99 mm, Weight: 72.32g
Created on: Friday 22nd March 2024
Last updated: Monday 25th March 2024
Spatial data recorded. This findspot is known as 'Greetham with Somersby', grid reference and parish protected.

Record ID: LIN-D86CD4
Object type: PENDANT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A lead pendant or mount, probably medieval to post-medieval in date. The object is drop-shaped, plano-convex with a piercing at the narrow end. It is decorated on both sides with radiating oblique grooves around the perimeter. Mid-grey patina. Length: 15.92mm; Width: 11.67 mm; Thickness: 3.26 mm; Weight: 3.91g
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded. This findspot is known as 'Greetham with Somersby', grid reference and parish protected.

Record ID: LIN-D4C018
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A lead medieval spindle whorl dating to c.AD 1150-1450. It is triangular with a circular flat base and top with a circular hole running through the object. Pale-cream patina. Diameter: 23.9 mm; Height: 24.72 mm; Weight: 32.92g
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded. This findspot is known as 'Greetham with Somersby', grid reference and parish protected.

Record ID: LIN-C56C03
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete lead plaque of probable Georgian/Victorian date c. AD 1700-1900. The piece is the form of arcading with a small cherub figure lounging over the top and holding onto a textile piece. The archading is decorated with foliate motif and is triple banded around the curved and longitudinal sides. There are two circule indenatations on the reverse, probably to fix it to another piece. The reverse is flat and it has a lozenge shape with illegible shape/writing. Max Length (diagonal from broken curved frame): 70.09 mm; Thickness: 13.83 mm; Weight: 85.79g
Created on: Thursday 21st March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

Record ID: NLM-C1CA6B
Object type: WEIGHT
Broad period: UNKNOWN
Workflow stage: Awaiting validation
Lead and copper alloy weight. Cast plano-convex oval or coffee-bean-shaped object with an embedded longitudinal copper alloy strip [of length 17.7mm and width 1.3mm] which appears on both the flat and convex or keeled sides of the object. There is the suspicion of a basal rim, which might be apt to a piece for a board game, as kindly suggested by the finder. Patinated. The neat and vulvate appearance might point to a Roman date. The flat base would permit use as a standing weight with a balance, possibly representing one quarter uncia. Inset objects are more usually associated with Vik…
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
No spatial data available.