Record ID: NLM-E6E0CA
Object type: PENKNIFE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Iron and copper alloy penknife fragment. Two iron blades and possibly another implement for a folding knife, retained between fragmentary flat plain copper alloy side plates of thickness 0.7mm by long rivets – whether one or two is now uncertain. A flat oval plate with faint traces of cross-hatching marks the end of the knife handle. Side plates of bone or ivory would have been secured outside the copper plates which remain and would have butted up to the end plate. The object has been exploded by the expansion of its corroding iron blades. Suggested date: Post-Medieval, 1800-190…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E6CAF3
Object type: PIN
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy pin. A small pin with a tapered square-section shank and an expanded integrally cast globular head. This might alternatively have functioned as a rivet. Suggested date: Unknown, Roman to Medieval, 43-1500 Length: 17.1mm, Diameter (head): 4.7mm, Weight: 0.74gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E6A4D9
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy probable vessel fragment. Cast plano-convex section fragment from a cauldron leg with a pronounced moulded rib on its outer side, flat behind. Raggedly broken at both ends of its short remaining extent. This might suggest multiple casting flaws, the vigorous dismantling of an object for recycling, or recurrent plough-strike damage - pot legs are robust objects and this pattern of breakage is unusual. So too, for a cauldron leg, is the lack of sooting - though black spots were observed on the magnified views achieved during image processing, so this could have been part of …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E68855
Object type: RING
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy ring. A cast oval ring of rounded oval section. Slightly curved in profile. Suggested date: Post-Medieval, 1500-1800 Length: 33.3mm, Width: 25.0mm, Thickness/Diameter: 2.7mm, Weight: 3.57gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E66B8A
Object type: CAME
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead window came fragment. A short length of cast H-section window came with a trapped fragment of dark degraded glass at one end on one side. Patinated. This came would have permitted the setting of two small adjacent panes. The glass is reverting to its constituent ingredients, which is a feature of a medieval ‘forest’ glass made using potash, rather than the more robust soda glasses of earlier and later times. The width of the slot suggests a thickness of c.2.5mm for the panes. The reporting of window came of medieval date among field finds is remarkably rare. Suggested …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E64FA1
Object type: DISC
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead disc. A small lead disc, probably cast as a border appears on one side, with a narrow lug or sprue projecting from one edge, damaged at the opposite edge. Patinated. Suggested date: Unknown, Medieval to Post-Medieval, 1200-1800 Length: 17mm, Width/Diameter: 13.9mm, Thickness: 1.4mm, Weight: 1.55gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E5C035
Object type: VESSEL
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel repair patch. A twice sharply folded sub-rectangular sheet metal patch of thickness 0.6mm, used to repair a split in the wall of a wooden vessel of an estimated diameter exceeding 110mm. The flanges or flaps formed by the second folding of the patch are now worn and tattered. Suggested date: Post-Medieval, 1500-1700 Length: 44.4mm, Width: 18.3mm, Thickness (overall): 3.6mm
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E59D2E
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Cast vessel leg with a single central longitudinal rib on its outer side and with a flat to slightly concave back. Tapered slightly towards a flat base; broken raggedly across the top. There is only a slight trace of sooting on the ribbed side, which might suggest this object to have been detached from an item of formal tableware such as a ewer rather than from a cauldron. Suggested date: Medieval, 1250-1350 Length: 50.9mm, Width: 29mm, Thickness: 8.1mm, Weight: 48.37gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: SUSS-E59744
Object type: RETOUCHED FLAKE
Broad period: NEOLITHIC
County: East Sussex
Workflow stage: Awaiting validation
A retouched flint flake of suggested middle Neolithic to early Bronze Age date c. 3300-1000 BC.  The secondary flake is elongated and sub-triangular in plan and cross-section; a small section of cortex surviving at the distal edge which has a chip at the terminal with fresh breaks suggesting more recent damage. The ventral surface is slightly concave with a pronounced bulb of percussion and raised rippling suggested hard hammer working. The dorsal surface has five removal scars with crude removals at the proximal end, possibly damage, but some finer …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E592A1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Possible copper alloy coin, either an irregular radiate or nummus on a small flan or a Theodosian nummus, further details illegible, c.AD275-402
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E58102
Object type: COIN
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Farthing of George II (1727-1760), issue of 1730-1754, worn. Obverse description: bust laureate cuirassed left Obverse inscription: [---] II REX Reverse description: Britannia seated left holding sprig aloft, exergual line Diameter: 23.1mm, Weight: 4.83gms, die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E565DA
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A fragment of cast lead sheet of structural gauge with a roughly textured underside [as cast] suggesting manufacture of the sheet using a sanded surface. This is the mark of a professional scheme of casting work. One or two adjacent edges are cut; the object has subsequently been partly melted. Patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 59.7mm, Width: 35.3mm, Thickness: 4.4mm, Weight: 67.78gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E52CC6
Object type: OFFCUT
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead offcut. A rectangular fragment of lead sheet which has been cut on all sides, folded or rolled, lightly grooved or scratched in one direction; now patinated. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Length: 25.2mm, Width (as found): 16.5mm, Thickness (sheet): 2.4mm, Weight: 15.89gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E5109C
Object type: WEIGHT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead weight. A small weight made by hammering an oval droplet of solidified lead melt leaving the imprint of the hammer-blow visible on one side, and then piercing a conical hole at a projecting lug from the same side. Patinated. Presumably for use with a fishing line. Suggested date: Medieval, 1200-1500 Length: 21.7mm, Width: 14.4mm, Thickness: 4.4mm, Weight: 7.75gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WREX-E5007C
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Incomplete silver groat of Henry VIII (1509-1547AD) third coinage, third bust, London (Tower) mint, dating 1544-1547. Obverse has crowned bust right and the legend […]DI GRA AG[…] Reverse has a squared shield on long cross fourchée, dividing the legend, POSVI […] Measurements: Diameter: 21.2mm; thickness: 0.5mm; weight: 1.14g; die axis 4
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E4F454
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead possible spindle whorl. Cast globular or bun-shaped whorl with opposed flat sides and with a slightly off-centre square moulded aperture of c.8mm square; patinated, with a cut by the hole on one side which might represent a tying notch. The thick patina points to an object of some age. If indeed a whorl – the square hole would be an aberrant feature – the spindle hole size would fall between the ranges accepted for earlier and later parts of the early medieval period. Whorls in other materials acquired lathe-turned globular forms from about the 13th century, which migh…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E4D553
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus of the House of Valentinian (364-378), Emperor right, Reece period 19. Possible traces of silver wash on reverse. Obverse description: bust diademed right Reverse description: possibly Emperor advancing right holding labarum and dragging captive; trace of silver wash. Reverse inscription: possibly [GLORIA ROMANORVM] Diameter: 15.6mm, Weight: 1.17gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E4B669
Object type: COIN
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. From its size probably a milled farthing, Post-Medieval issue of c.1672-1804 but retaining no clearly discernible detail on either side. The object has probably been burnt. Diameter: 21.5mm, Weight: 3.20gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WREX-E4A8D2
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Silver sixpence of Elizabeth I (1558-1603AD), second coinage, with a lion initial mark, dating 1567 (North 1997). Obverse has the crowned bust left, with a rose behind the head and the legend ELIZABETH DG ANG FR ET HI REGINA. Reverse has a squared shield on long cross fourchée, dividing the legend POSVI DEV ADIVTOREM MEV with the date 1567 above. Measurements: Diameter 34.2mm; thickness: 0.6mm; weight: 2.72g; die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E48632
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. Cast vessel leg of thin rectangular section at the top, where it is broken, and expanded and thickened at a flat-based foot of wedge-shaped profile. Two shallow longitudinal grooves appear on the outer side of the leg; the back is flat. Traces of sorting, thicker on the outer side, suggest the vessel saw use on a hearth. Suggested date: Medieval, 1200-1500 Height (in use): 42.6mm, Width: 36.6mm, Thickness (at foot): 16.3mm, Weight: 69.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E4660E
Object type: AMMUNITION
Broad period: MODERN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible anti-aircraft shell fragment. A shard from the slightly everted rim of a cylindrical object vessel of estimated diameter 80mm with iron staining at the top; shattered at either side and along its lower edge. The pattern of catastrophic damage might point to a shard from an exploded anti-aircraft shell, which would be consistent with its suspected diameter. The iron staining may alternatively indicate this object had a place in an assembly of iron or steel parts intimately associated with or enclosed by a thick [5.5mm] copper alloy casing – a definition which…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E43C9D
Object type: VESSEL
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment, as kindly identified by the finder. A small cast tongue-shaped cauldron or pipkin leg, of plano-convex section, fiercely abraded, chipped on one edge and sooted on its outer side from use on a hearth. Suggested date: Medieval, 1200-1500 Length: 25.6mm, Width: 19.8mm, Thickness: 6.9mm, Weight: 13.32gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: WREX-E42BB4
Object type: SPUR
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper-alloy rowel spur of Post-Medieval date, c.1600 – 1800AD. The spur consists of an ovate sectioned neck which splits to one end forming the rowel box. The rowel is now missing. The curved arms with a D-shaped section. Both arms have been bent and distorted, but each terminate with a pair of button-headed rivets. The spur has a mid-green patina and is worn. Measurements: Length:80.2mm, width10.3mm; thickness: 5.5mm; weight: 36.35g
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Prees', grid reference and parish protected.

Record ID: NLM-E3ED4E
Object type: DAGGER
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy dagger. Cast dagger hilt incorporating short opposed quillons angled in a shallow S-shape when viewed in plan springing from a rounded central block with a central trapezoid slot for a narrow thick V-section blade [7.3mm by 12.7mm], and with a shell or fan-shaped projection from one other side of the central block and a moulded rib on the last side opposite the latter. The block and quillons are decorated by deeply incised chevrons with a field of angled cuts on both sides; three deep cuts also confer texture on the upper surface of the fan-shaped element. Suggested date: …
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NMS-E3DE98
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver groat of Richard III, London, initial mark sun/rose, North 1679, weight 2.99g, little wear, 1483-5
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E3C94D
Object type: SEAL
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
Lead bag seal. Cast disc with a slot in its edge and an opposed bifurcated slot, to function as a drawstring bag closure. Both sides bear the central motif of the Pelican in its Piety, the brand mark of Earles Cement Co. Partial legends on both sides read: [EAR]LES LIMITED. Patinated. Suggested date: Modern, 1900-1950 Diameter: 21.1mm, Thickness (at edge): 7.5mm, Weight: 10.07gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.

Record ID: NLM-E3A1B2
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Tealby penny of Henry II (1154-1189), issue of 1158-1180, as kindly identified by the finder. Obverse description: bust left, sceptre before face. Legend at edge of flan not deciphered. Reverse description: cross potent with a crosslet in each angle. Initial cross potent. Reverse inscription: +hENRI.ON:S:[--] Diameter: 20.1mm, Weight: 1.38gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E39636
Object type: KNIFE
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Iron strip, perhaps the blade from a knife. It is 120mm long and one end is encased in delaminating corrosion. Away from this end, it is generally around 19mm wide, with one edge straight and 3mm thick, tapering to the other edge which may represent the cutting edge. The end without the corrosion layers has the cutting edge curving up to meet the back of the blade in a rounded point. The corroded end is broken and has no evidence of a whittle tang. The strip is now bent at a slight angle about halfway along its length. It weighs 45.0g. The identification as a knife is very t…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E388CA
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. Cast bar mount with a central concavo-convex boss wih incised horizontal grooves and opposed rounded lobes for attachment, one retaining a rivet of diameter 1.2mm and length4.4mm. Suggested date: Late Medieval, 1350-1400 Length: 19.4mm, Height (i.e. projection): 3.6mm, Weight: 1.71gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E36935
Object type: RING
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Neatly circular iron ring, 51.5mm in diameter. In cross-section it is circular, 8mm in diameter. It weighs 31.8g. The ring was found close to several early Anglo-Saxon objects and is likely also to be of that date. It may have been used as a suspension ring.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E359C3
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Radiate indeterminate, probably a later Roman irregular barbarous radiate of 275-285, Reece period 14. The finder kindly notes the appearance of cut corners and suggests a possible use as a ring bezel, albeit coin-type features appear on both sides. Obverse description: radiate head right. Reverse description: looks like a head right with blundered legend. Reverse inscription: [--] ROV Diameter: 14.7mm, Weight: 0.67gms, die axis: possibly 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E340B0
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny, probably clipped and certainly folded [in the same ‘open’ manner as NLM-E29D79 but with reverse outermost], probably of Henry V (1413-1422), York mint, possibly North no. 1403 Obverse description: facing bust with wide bifoliate crown whose ornaments may touch each other, cinquefoil/mullet to left of crown Reverse description: long cross, three pellets in each angle, central quatrefoil Reverse inscription: CIVI/TAS/EBO/[RACI] Diameter: 17.3mm, Weight: 0.86gms, die axis: probably 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E3383A
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation
Fragment of late Iron Age copper-alloy D-shaped terret, now very corroded but perhaps originally enamelled. It has a sub-circular or slightly oval upright collar terminal 13.7mm wide, 12.1mm tall and 4.8mm thick. From one side of this projects a triangular-section upper ring, with a flat inner and an angled outer. On the other side of the collar, at its base, is a stub of the attachment bar which shows that this was rectangular-section, 6.5 x 3.4mm, and set vertically. The overall length is 21.0mm and it weighs 7.34g. All surfaces of the fragment, including the breaks,&…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NLM-E31CD6
Object type: COIN
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Rose farthing of Charles I (1625-1649), probably Spink no. 3203, Rose Type 3, issue of 1625-1643 Obverse description: arched crown with sceptres passing through its band, lower ends of sceptres cross inner circle. Mintmark possibly Mullet or star of five points Obverse inscription: CAROLVS.D.G.M[--]BRI Reverse description: crowned rose, large crown. Reverse inscription: FRA:ET.hI.[--] Diameter: 14.0mm, Weight: 1.15gms, die axis: 12
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E30159
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy button. Cast plano-convex discoid button with a moulded eight-armed left hand spiral or impeller motif with a central pellet and a billeted border on its front, and with an integrally cast and drilled shank. Suggested date: Post-Medieval, 1650-1750 Height: 16.3mm, Diameter: 13.9mm, Weight: 3.97gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E2E439
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Probably a round long cross halfpenny or penny, issue of 1280-1483, York mint, very worn Obverse description: facing bare shouldered bust, tall probably bifoliate crown, inner circle – the latter possibly duplicated by double striking. Legend lost. Reverse description: long cross, three pellets in each angle Reverse inscription: CIVI/T[AS/EBO/RACI] Diameter: 16.3mm, Weight: 0.73gms, die axis: probably 3
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E2C22A
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny of Edward I (1272-1307) class 4c issue of 1282-1289, possibly from a hoard with NLM-E29D79, so submitted to Treasure process, ref. TBC Obverse description: facing bust with wide trifoliate crown with nicked band left, drapery of angled wedges, long face with pointed chin, initial cross potent. Obverse inscription: +EDW R’ ANGL’ DNS hYB Reverse description: long cross, three pellets in each angle. Reverse inscription: .CIVI/TAS/LON/DON Diameter: 18.7mm, Weight: 1.32gms, die axis: 5
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E29D79
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Long cross penny, probably of Edward II (1307-1327), probably class 10cf5 issue of 1307-1310, folded with obverse outermost. Possibly from a hoard with NLM-E2C22A, so submitted to Treasure process, ref. TBC Obverse description: facing bust with wide bifoliate crown with curved band; initial cross pattee. Obverse inscription: +[E]DWAR [?]ANGL DNS hYB Reverse description: long cross, three pellets in each angle. Small lettering. Reverse inscription: [CIVI/TAS/LON/DON] Diameter: 18.4mm, Weight: 1.25gms, die axis: probably 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.

Record ID: NLM-E28024
Object type: COIN
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
Copper alloy coin. Milled farthing of Charles II (1660-1685), dated 167?4 Obverse description: bust laureate cuirassed left. Obverse inscription: CAROLVS A CAROLO Reverse description: Britannia seated left, contracted pose. Date in exergue: 167?4 Reverse inscription: BRITAN NIA Diameter: 22.4mm, Weight: 4.99gms, die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
No spatial data available.

Record ID: NLM-E268F4
Object type: COIN
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Milled halfpenny of George III (1760-1820), dated 1799, third issue, Birmingham mint. Obverse description: small bust laureate draped right. Obverse inscription: GEORGIUS III DEI GRA [--]R[-] Reverse description: Britannia seated left holding sprig aloft. Date – 1799 – in exergue Reverse inscription: [BRITANNIA] Diameter: 30.4mm, Weight: 11.82gms, die axis: 6
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Baumber', grid reference and parish protected.