Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type: 1750
    • County: Kent

  • Thumbnail image of KENT-F31C8A

Record ID: KENT-F31C8A
Object type: BELL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast hand bell of probable 17th-19th century date. Description: The fragment is roughly triangular in plan and represents a lower section of the body, part of the belt and the lip. The outer face is convex and the internal is concave. Full diameter was roughly 50mm. The belt of the bell, dividing the body from the lip is slightly cast in relief with some finishing. The bell fragment is a dark grey-green colour. Measurements: 63.91mm wide, 44.91 high, 4.15mm thick and 47.28g in weight
Created on: Thursday 11th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-F2D33F

Record ID: KENT-F2D33F
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn and incomplete Medieval silver penny of Edward III (1327-1377), probably Fourth coinage, pre-treaty period (1351-1361), Series C (1351-1352). Minted at London. Initial mark Cross I, annulet stops. North (1991) no.1149. Measurements: 16.68mm diameter, 0.62mm thick and 0.8g in weight.
Created on: Thursday 11th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-F2B016

Record ID: KENT-F2B016
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A silver Medieval cut-farthing in the name of William I of Scotland (1165 - 1214), Short Cross, Phase B or Phase C (posthumous issue?) under Alexander I (1214-1249) dating from c. AD 1205 - 1230. uncertain mint and moneyer possibly Roxburgh. Uncertain Spink (2003) number. Measurements: 10.36mm long, 10.08mm wide, 0.98mm thick and 0.31g in weight.
Created on: Thursday 11th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-F27945

Record ID: KENT-F27945
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-Medieval silver halfgroat of James I (1603-1625), minted at London. Second Period Coinage (1604-1619), initial mark is illegible, North (1991) no 2105/1. Measurements: Diameter: 17.16mm Thickness: 0.62mmWeight: 0.73g
Created on: Thursday 11th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-E75FC1

Record ID: KENT-E75FC1
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast engraved and incomplete Medieval lead-alloy personal circular seal matrix. Description: The matrix is circular and quite thick with the back being convex leaving it D-Shaped in cross section. On the front there is a central incuse design of a stylised Alpha and vegative elements. There is a plain line border around the design dividing it from the inscription starting with a cross potent and reading '+S'ThOME + GMhOT', The first initial mark has been obliterated and the letter on the second part of the name seems far cruder. The reverse is decorated with seven raised…
Created on: Wednesday 10th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-E2F3B3

Record ID: KENT-E2F3B3
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast engraved and incomplete Medieval lead-alloy personal circular seal matrix. Description: The matrix is circular and quite thick with the back being convex leaving it D-Shaped in cross section. On the front there is a central incuse design of a stylised fleur de lis. There is a plain line border around the design dividing it from the inscription starting with a cross potent and reading '+S.PETRILE DE NIEDES', The reverse is decorated with seven raised dots with a bottom one bellow three evenly in a line dots and the top three aligned unevenly giving the impression of a simplified…
Created on: Wednesday 10th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-E29275

Record ID: KENT-E29275
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast engraved and incomplete Medieval lead-alloy pointed oval seal matrix. Description: On the front there is a central incuse design of a stylised fleur de lis and there is a slight dash in each of the quarter created by the matrix. There is a plain line border around the design then the inscription starting with a cross potent and reading '+S.MAGARIE.REL'TE.SIMIS', The reverse is undecorated and the suspension loop at the apex of the back has been folded down on itself. The entire matrix is slightly warped and the edges abraded. Measurements: 38.95mm long, 23.95mm wide, 6.52mm t…
Created on: Wednesday 10th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-E1F6D8

Record ID: KENT-E1F6D8
Object type: COIN
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn silver denarius of Septimus Severus (AD193-211), dating to the period AD 194-195. P M TR P III COS II P P reverse type depiciting Mars advancing right holding spear and trophy. As RIC IVa No. 52. Measurements: 19.52mm in diameter, 1.76mm thick and 1.88g in weight.
Created on: Wednesday 10th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-E13039

Record ID: KENT-E13039
Object type: COIN
Broad period: GREEK AND ROMAN PROVINCIAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn copper-alloy coin struck at the Phoenician colony Ebusus (the Balearic island of Ibiza) c.210-c.190s BC, 708; Villaronga pg. 93, 22; SNG Morcom 15. Description: Obverse: Squatting facing Kabeiros/Bas [holding hammer in right hand] and serpent in the left. Reverse: Bull butting left. Reverse is slightly struck off centre. Measurements: 16.13mm in diameter, 2.65mm thick and 2.15g in weight. Discussion: While an apparently odd coin to be found in Kent, it has been noted by Iron Age Kentish Coinage expert David Holman that a small spread of these coins is known from Easte…
Created on: Wednesday 10th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-DCFEFE

Record ID: KENT-DCFEFE
Object type: HARNESS PENDANT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy probable Early-Medieval harness pendant c.1000-1100. Description: The object is a flat and roughly bell-shaped and openwork plate. The plate has a suspension loop formed from a bar between two small circular knops, this forms a large D-shaped openwork loop. The knops form the terminals of a crescentic section of plate with five small circular piercings. From the concentric plate emanates two horse/beast heads with arching necks, they reconnect roughly at their 'manes; creating an ovoid openwork section, this is flanked by two circular holes. between the co…
Created on: Wednesday 10th October 2018
Last updated: Wednesday 10th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-CD599C

Record ID: KENT-CD599C
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A very worn silver penny of King Stephen (AD 1135 - 1154). Cross moline with fleurs in angles reverse. Watford type (c. AD 1136 - 1145) probably minted at Norwich by uncertain moneyer.North (1994, 203) no.874. BMC i. Measurements: 21.4mm in diameter, 1.35g in weight.
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-CC890C

Record ID: KENT-CC890C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A near incomplete cast copper-alloy Medieval single loop buckle with integral plate c.1250-1400. Description: The frame is trapezoidal with an integral plate, the plate has even narrowed sides with heavily worn upper surface. The frame is flanked by a knop either side of the strap bar. Two rivet holes go through the plate, One paired with a piecing for the now sheet metal buckle tongue, the second is at a terminal plate with a missing hook. The buckle plate is heavily mottled green and brown. The plate is bent slightly along its length and the surface is quite thick. Measurements: 44…
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-CC2D83

Record ID: KENT-CC2D83
Object type: BROOCH
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval high tin copper-alloy annular brooch of c. AD 1200-1400 date. Description: The brooch is annular in plan with a circular cross section. The pin is missing and would have been rapped around the indent on the frame, both wire and sheet copper has been used in the past. The entire frame has been slightly warped. There is no decoration on the brooch frame and it is a dark grey colour. Measurements: 22.37mm in diameter, 2.63mm thick and 2.72g in weight. Discussion: Although easily confused with annular buckles the suggested distinguihsing factor is that annular bro…
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-CA859D

Record ID: KENT-CA859D
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete and very worn copper-alloy Medieval pedestal seal matrix dating to the 14th century. Description: The object is cast in one piece and consists of a narrowing tapering handle from a wide convex octagonal base forming together a conical shape. At the top of the object is a pointed oval suspension loop, now mostly missing. Just prior to the suspension loop is an incised line producing a collar. The matrix' die is roughly circular although heavily abraded with a central design probably meant to represents the pelican in her piety with the pelican over her nest. The surrounding …
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-CA0C83

Record ID: KENT-CA0C83
Object type: ARROWHEAD
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete flint Late-Neolithic ripple flaked arrowhead (c. 3300 BC-c. 2100 BC). Description: This arrowhead is triangular in plan with a slightly concave base. The arrowhead appears to have had a barb on bottom left side although it appears to have beens snapped away. The arrowhead has been formed by a mixture of short scaled low-angle retouch save for half of the dorsal face where the retouch is formed from invasive parrallel low-angle retouch. The arrowhead is dark brown becoming lighter and more transluscent towarsds its edges. Measurements: 27.33mm long, 20.95mm wide, 5.29mm thi…
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-C9AB5D

Record ID: KENT-C9AB5D
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A circular lead pan weight of late Medieval to Post-Medieval date. Description: The pan weight is circular in plan and D-Shaped in cross section. with a simple incised cross on its upper face formed from four uneven triangles. The weight has been crudely cast leaving it quite uneven. The object is heavily patinated an off-white colour and exhibits numerous marks from post-depositional damage. Measurements: 44.15mm in diameter, 11.8mm thick and 161.25g in weight. Discussion: Circular weights with crosses, either cast in relief or depressions can be paralleled from examples excavated …
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-C86F17

Record ID: KENT-C86F17
Object type: SPUR
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of early Post-Medieval copper-alloy probably hinged rowel spur dating from c. AD 1650 - c. AD 1750. Description: The spur survives as the terminal end of one arm. The arm is D-shaped in cross-section, being flat on the inside surface. At the terminal end is the standard figure of 8 rivet holes. Proceeding the terminal are 3 diamond shaped collars evenly spaced along the arms before it begins to flares. There is an incised line from the terminal to the break with diagonal incised lines emanating from it from the point at which the arm begins to widen, these lines faces backw…
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-C8000B

Record ID: KENT-C8000B
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy decorative strap mount of Post Medieval period, dating from c. AD 1600 - c. AD 1700. Description: The mount is broadly shield shaped with high swept corners creating a concave upper edge, At the centre of the upper edge is a trefoil/lis shaped knop. The upper face of the mount is decorated with a floral/vegetative motif cast in relief. This design consists of a central stem with tendrils curling below, leaves either side of the stem, and two symmetrical floriate tendrils at the top, spiralled towards each other. There is a raised border around the edge of th…
Created on: Tuesday 9th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-B85DD6

Record ID: KENT-B85DD6
Object type: COIN
Broad period: IRON AGE
County: Kent
Workflow stage: Published Find published
An Iron Age gold quarter stater of the Kent Region / Cantiaci, struckfor Eppillus, c. AD 1-15, Eppillus King type. Obverse: Legend COM.F in a panel across two opposed neck torcs and curvilinear motifs. Reverse: A horse left, EP above, REX below. As ABC (Rudd), p. 42, no. 396. Measurements: 12.5mm in diameter and 1.37g in weight. Discussion: Coin is die linked to type specimen for ABC 396, coin 08.9227 (CCI?).
Created on: Monday 8th October 2018
Last updated: Wednesday 10th October 2018
Spatial data recorded.


  • Thumbnail image of KENT-B736C7

Record ID: KENT-B736C7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast white metal coated copper-alloy medieval single loop buckle with integral, forked spacers dating to c.1350-1450. Description: The frame is missing its composite buckle plate and its attachment spacers, unusually remain mostly intact despite the lack of plate. The buckle frame is a narrow oval, lipped on the outside edge for the now missing pin to rest in. A narrow bar is placed between the raised rectangular collar denoting the start of the two two-stepped prongs of the integrally cast forked spacers. The spacers are heavily distorted one bent over the other, the l…
Created on: Monday 8th October 2018
Last updated: Thursday 11th October 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 25,029
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 39,262
  • Mean quantity: 1.569
  • Maximum: 4,653

Filter your search

1 - 20 of 25,029 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.