Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type: 1312
    • Sort: updated

  • Thumbnail image of CORN-30C6D2

Record ID: CORN-30C6D2
Object type: BROOCH
Broad period: ROMAN
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a cast copper alloy Roman South-western T-shaped brooch. Only the end of the bow and the foot of the brooch remain with the lower section of the integral catchplate at the back, broken at the point at which the metal would have been folded over to hold the pin. The front of the brooch has four longitudinal or vertical ribs alternating with grooves, two on either side of a central groove containing transverse or horizontal mouldings making the pattern look cross-ribbed rather than a zig-zag pattern. Bayley & Butcher (2004) illustrate a hinged T-shaped brooch with longit…
Created on: Thursday 31st January 2019
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Image not taken

Record ID: SOM-BF364B
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy disc brooch that is formed from thin plate that has a concave/dished interior and convex underside thereby creating a bowl shape. In the centre of the bowl is a seperate copper alloy upwardly pointing circular cross sectioned pin that has a wide base, narrow waist and a slightly expanded flat topped terminal and is secured in place by a single integral rivet at its base which goes through a hole in the plate. Evenly spaced around the outside edge of the rim are ten outwardly projection small knops. The front (concave) face is decorated with an unrecessed narrow bo…
Created on: Tuesday 19th February 2019
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of GAT-03AF25

Record ID: GAT-03AF25
Object type: BROOCH
Broad period: ROMAN
County: Gwynedd
Workflow stage: Published Find published
1st century Roman cast copper alloy wheel plate brooch. It has a raised inner and outer rim between which is a recessed surface which is slightly convex in section forming a slight rounded central ridge. Four opposed spokes which are triangular in section attach the rim to a central hub which is circular and cylindrical. It has a raised outer rim and a recessed area surrounding a central rounded knop. The fixing method was by pin located between two upstanding perforated lugs cast with the brooch body; these survive though one of the lugs is partially broken away. The pin was locked a…
Created on: Friday 15th July 2011
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of YORYM-BF9311

Record ID: YORYM-BF9311
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy lugged wheel disc brooch dating to the Roman period (AD 100 - AD 200). The brooch is now broken into two pieces, but the majority of the object has survived. It is circular in shape, with an openwork 'wheel' design. This consists of a central, raised boss in the form of a ring and dot. This is surrounded by four opposing spokes, connected together by an outer circular frame. The frame is decorated, alternating between rectangular blocks of red enamel and recesses, which presumably housed another colour. The blocks and recesses are evenly sized, with eleven o…
Created on: Tuesday 20th February 2018
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of DENO-0A30B3

Record ID: DENO-0A30B3
Object type: BROOCH
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A flat disc-shaped brooch with peripheral lugs, dating to the 2nd century AD. The interior consists of three cells separated by two concentric rings arranged around a central circle. The outer ring is inlaid with blue enamel. The inner ring appears to be inlaid with mother of pearl or a similar iridescent material. The rear pin is missing. The brooch measures 26.7mm in diameter, is 7.6mm thick, and weighs 5.75g. Similar to Hattatt (1989) p. 345, fig. 204, no. 531.
Created on: Wednesday 25th October 2017
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of WMID-3FD739

Record ID: WMID-3FD739
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy lugged disc plate brooch (moulded type) of the Roman period, dating from c. AD 100 - c. AD 200. The brooch is broadly circular in plan and is broadly C shaped in section. There are nine protruding circular knops from the outer edge of the brooch, the top two form part of the hinge that hold the remains of the spring on the reverse. The front of the object is concave and has been decorated with a six pointed star or sun in the centre with six white enamel pellets surrounding it. There is blue enamel decorating the outer edge of the design, the blue enamel has…
Created on: Tuesday 23rd May 2017
Last updated: Tuesday 19th February 2019
Spatial data recorded.


  • Thumbnail image of HAMP-CDF707

Record ID: HAMP-CDF707
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy 2nd-century Roman disc brooch. The circular brooch has ?ten plain peripheral lugs emerging from a flat outer border. The body of the brooch is concave (dished). The lower surface is plain and features a truncated double semicircular pin lug at one end and a semicircular catch-plate at the other; the pin is missing. The upper surface is finely scalloped within the border. Central in the field is a six-pointed star surrounded by six pellets between the rays; the detail is indistinct due to corrosion. The star is centrally perforated for a centre-boss, now …
Created on: Thursday 2nd July 2009
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Quarley CP', grid reference and parish protected.


  • Thumbnail image of IOW-C498AA

Record ID: IOW-C498AA
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete Medieval copper-alloy harness pendant (c.1150-c. 1400). This domed pendant is in the shape of a scallop shell with a cut-away tear-drop shape in the centre. The suspension loop is turned at 90° to the plane of the pendant. At the front, the cut-away is outlined by a border of indeterminate motifs. The scallops of the shell are indented and the remains of gilding is present on the front face only. Length: 44.8mm; width: 28.9mm; thickness: 7.5mm. Weight: 6.11g. Hinton illustrates a harness swivel with scallop decoration from Winchester (Biddle 1990, vol. ii, no. 3919) and…
Created on: Tuesday 19th February 2019
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-C3D5B5

Record ID: IOW-C3D5B5
Object type: COIN
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete Medieval silver long cross cut farthing of Henry III (1216-1272), minted at Lincoln or London. Class 2a-3c, 1248-1250 (North 1994: 226, refs: 985/1-988). Obverse: [hE]NRIC[ ] (NR ligated); Crowned bust facing without sceptre Reverse: [ ]ONL[ ]; Voided long cross with three pellets in each quadrant. Length: 9.0mm; width: 8.3mm. Weight: 0.39g. North, J. J. 1994. English Hammered Coinage, Volume I, Early Anglo Saxon to Henry III, c. 600-1272. Spink & Son, London.
Created on: Tuesday 19th February 2019
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-C207CB

Record ID: IOW-C207CB
Object type: COIN
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and worn Medieval Anglo-Gallic billon hardi of Henry IV, V or VI (1399-1453), issued from Aquitaine. Obverse: [EN]RIC R/[An]GLIE; A half-length crowned figure holding a sword under a Gothic arch. Reverse: FRA/CIE/ DnS/ A[QI]; Long cross with leopard and lis in alternate angles, annulet beneath. Diameter: 17.8mm. Weight: 0.96g. DA=12:5.
Created on: Tuesday 19th February 2019
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of SF450

Record ID: SF450
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Fragmentary gilded copper alloy wrist-clasp of Hines form B18b. Bar, flattened in section, decorated along its length with gilded transverse incisions and grooves; the remains of the bar carry two discoid projections, each with a central dot enclosed by a concentric ring of gilded finely-punched dots; both projections are joined by a central bar; the bottom one also has a lateral T-shaped extension. Very similar to an example from Barrington, Cambridgeshire, illustrated by Hines (1993, fig. 112a).
Created on: Thursday 25th November 1999
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Bloodmoor Hill', grid reference and parish protected.


  • Thumbnail image of NLM5

Record ID: NLM5
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: North Lincolnshire
Workflow stage: Published Find published
Plain male clasp, Hines form B20.
Created on: Wednesday 13th May 1998
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'NORTH LINCOLNSHIRE', grid reference and parish protected.


  • Thumbnail image of NLM714

Record ID: NLM714
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published Find published
Long and narrow strip, deeply moulded, silvered, but not finished, no sewing holes nor hook or loop. Probably therefore a separate bar from Hines form B13, B14 or B17.
Created on: Wednesday 9th September 1998
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'SOUTH KESTEVEN', grid reference and parish protected.


  • Thumbnail image of NLM2746

Record ID: NLM2746
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Female part of a set of sleeve clasps, Hines form B12.
Created on: Thursday 7th October 1999
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'EAST LINDSEY', grid reference and parish protected.


  • Thumbnail image of SF688

Record ID: SF688
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper alloy wrist clasp, probably of Hines form B12. Bar formed from 3 rectangular fields (one missing) separated by transverse grooves and lines, the fields are decorated on their upper surface with incised double contoured diagonal crosses; one pierced attachment lug survives at the outermost field; eye missing also.
Created on: Thursday 16th December 1999
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'SUFFOLK FRECKENHAM', grid reference and parish protected.


  • Thumbnail image of SF1477

Record ID: SF1477
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper alloy wrist clasp, probably of Hines form B18d. Rectangular plate and bar cast in one; the bar is decorated by a series of transverse incisions; the plate is pierced by 3 circular attachment holes and its outer edge is comprised of four sub-rectangular lobes each with a central nick.
Created on: Wednesday 16th February 2000
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'SUFFOLK CODDENHAM', grid reference and parish protected.


  • Thumbnail image of SF2385

Record ID: SF2385
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Cast copper alloy wrist clasp hook-plate, probably of Hines form B18d. Plate and bar cast in one; bar decorated on upper surface with crudely applied transverse grooves; the bar is pierced by three circular attachment holes and its outer edge has four damaged sub-triangular knops; the outer pair curving inwards; behind each of the knops the metal is punched with a single punched ring-and-dot; corroded.
Created on: Friday 5th May 2000
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'SUFFOLK LACKFORD', grid reference and parish protected.


  • Thumbnail image of SF2383

Record ID: SF2383
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Cast copper alloy wrist clasp hook-plate, Hines form B18d. Plate and bar cast in one; bar decorated on upper surface with crudely applied transverse grooves; the bar is pierced by three circular attachment holes and its outer edge is deeply scalloped to from four sub-rectangular knops; behind each of the knops the metal is punched with a single punched ring-and-dot.
Created on: Friday 5th May 2000
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'SUFFOLK LACKFORD', grid reference and parish protected.


  • Thumbnail image of NLM4174

Record ID: NLM4174
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Anglo-Saxon sleeve clasp with straight moulded outer edge with incisions, lobed other edge with 2 sewing holes. Male part.
Created on: Monday 9th October 2000
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'EAST LINDSEY', grid reference and parish protected.


  • Thumbnail image of NLM4641

Record ID: NLM4641
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Female Anglo-Saxon sleeve clasp, two rivet holes.
Created on: Thursday 16th November 2000
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'LINCOLNSHIRE BASTON', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 827,333
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,253,106
  • Mean quantity: 1.522
  • Maximum: 52,504

Filter your search

1 - 20 of 827,333 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.