Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type: 1312
    • Object type: BROOCH

  • Thumbnail image of GLO-EBFC58

Record ID: GLO-EBFC58
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman Hod Hill type brooch dating to AD 43-75. The brooch has rolled tubular wings that would have held the pin support, the interior of the tube is filled with iron corrosion suggesting the bar was made of iron, the top of the pin is still in place. Only the top of the bow remains, this consists of a transverse bar followed by an oval panel.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EBBDFA

Record ID: GLO-EBBDFA
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman bow brooch fragment consisting of the quarter of the narrow and undecorated bow, the remains of the catch plate shows it would have had an open triangular centre.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EB1DA4

Record ID: GLO-EB1DA4
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy umbonate brooch, this has a circular domed plate that is decorated with a small annular in the centre, this is surrounded by two concentric lines of triangular cells which covers the main surface area of the dome. The lower row of cells is filled with off white and red enamel possible arranged in a alternating pattern, a pattern that maybe repeated in the upper row, although clear identification of the colour is difficult owing to damage of the enamel. An expanded rim with a recessed border surrounds the plate. There is a projecting loop on the rear edge with a projecting …
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EAF2CD

Record ID: GLO-EAF2CD
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman bow brooch fragment consisting of the lower third bow, the bow is undecorated except for a slightly expanded and pointed foot.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EAEADD

Record ID: GLO-EAEADD
Object type: BROOCH
Broad period: ROMAN
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman bow brooch fragment consisting of the lower third bow, the bow is undecorated except for a globular shaped foot.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
No spatial data available.


  • Thumbnail image of GLO-EA7E99

Record ID: GLO-EA7E99
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman bow brooch fragment consisting of the lower third bow, there is a moulded knee at the top otherwise the remained of the bow is undecorated except for a disc shaped foot.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EA64CA

Record ID: GLO-EA64CA
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch, this is heavily corroded but is probably of the Colchester derivative, Polden Hill type. Fragmentary remains of the wings show they have a concave back but the ping attachment mechanism is missing. The bow appears to be undecorated except for a recessed band that runs down the middle. The sides are chamfered and the lower third of the bow is missing.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EA45A2

Record ID: GLO-EA45A2
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Colchester derivative Polden Hill brooch. Pierced lugs on either end of the wings hold the pin axis bar, the spring is made from nine curles, the pin now distorted is complete. The face of the brooch is decorated with a triple recessed band that runs down the centre of the band , this terminals in the middle of the bow where there is a recessed double transverse band, after which the lower part of the brooch is truncated resulting in the loss of the catch plate. Date AD 80-120.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-EA2E82

Record ID: GLO-EA2E82
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Colchester derivative Polden Hill brooch. Pierced lugs on either end of the wings would have held the pin axis bar, which is now missing. The face of the brooch is decorated with central recessed band that runs down the centre of the band is decorated with a double line of punched dots. The lower part of the brooch is truncated resulting in the loss of the catch plate. Date AD 80-120.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of NLM-E9D9B7

Record ID: NLM-E9D9B7
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast Aesica brooch with hinged pin, Mackrth type AES 4.a. Tubular wings with a single sunken moulding at each end are clenched behind to retain an axis bar for the stub of a hinged pin. The wings are clasped by a markedly curved bow with three broad ridges, the outer ones curving outwards at their base. Below these, there is a sharp constriction and collar above a triangular fantail foot with incised linear borders with cross-cut notches, and with the stub of a catch plate behind it. Suggested date: Early Roman, 140-160 Length: 26.3mm, Width: 24.6mm, Thickness (cr…
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded. This findspot is known as 'Stainton le Vale', grid reference and parish protected.


  • Thumbnail image of NLM-E9CC8E

Record ID: NLM-E9CC8E
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast Colchester derivative Polden Hill brooch, Mackreth CD PH 4.b. A plain integrally cast cylindrical case, open behind, retains a sprung pin of probably three coils and the stub of a pin with a chord now below, all on an axis bar held by the ends of the case; the stub of a projection on top of the case might indicate former provision for an upper position for the chord. A D-section bow now appears plain, and tapers towards an out-turned expanded foot with a plain folded catch plate behind it. Abraded. Suggested date: Early Roman, 90-150 Length: 29.4mm, Width: 1…
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E9AE6B

Record ID: NLM-E9AE6B
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast Colchester derivative brooch, probably a rearhook spring fastened type, Mackreth type CD RH 1.i. Semi-circular concavo-convex wings retain a white blob of fixative for attachment of a spring [lost]; their irregular surfaces suggest overall moulding. The bow is of rounded section with a broad front and borders to either side. The stub of a catch plate remains behind the lower bow. Fiercely abraded. It is presumed a rearward hook has been lost from the top of the bow. If this identification were sustained, it might suggest a connection with the Iceni tribe with …
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded. This findspot is known as 'Stainton le Vale', grid reference and parish protected.


  • Thumbnail image of NLM-E9986F

Record ID: NLM-E9986F
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch fragment. Cast Hod Hill brooch fragment, possibly Mackreth type HOD HILL 12.b1 (cf. Mackreth 20111, vol. 2 pl. 98 no. 14634). The narrow head is rolled over and constricted below; beyond a horizontal ridge or stop a sub-triangular plate appears as the upper part of a flat strip bow with a single central ridge flanked by gutters, the former possibly cross-cut. The stubs of small wings project at the base of the plate. An expanded rounded moulding is set at the mid bow with the top of a catch plate behind it; the rest of the lower bow is lost. Traces of white metal p…
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded. This findspot is known as 'Stainton le Vale', grid reference and parish protected.


  • Thumbnail image of NLM-E97E58

Record ID: NLM-E97E58
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch fragment. Hod Hill Brooch, Mackreth type HOD HILL 4.b1.A small cast brooch with a rectangular upper bow with wings projecting [one lost], and with three vertical ribs on the middle, with further ribbing on the wing. Three grooves and ribs run horizontally below this; the lower bow is plain, with a small out-turned pedestal foot knop. A folded catch plate remains behind the lower bow. A spot of white metal plating is trapped in the horizontal grooves. Suggested date: Early Roman, 25-65 Length: 34.9mm, Width: 19.5mm, Thickness [top of fragment]: 1.1mm, Weight: 3.21gms
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of NLM-E929EE

Record ID: NLM-E929EE
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast fly brooch, being a marked adaptation of a trumpet brooch form, Mackreth type OBJECT 6.a. A small trumpet head is surmounted by an integrally cast loop; the head itself has a simple border. Behind it, an axis bar, possibly iron, retains at least three coils of a small spring. The head is constricted markedly, with a central keel on the upper bow where it meets a V-shaped plate representing insect wings. These form two large triangular cells, both filled with [now] off-white enamel. At the base of the V, a collared knop represents the head of the insect with bu…
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of GLO-E90219

Record ID: GLO-E90219
Object type: BROOCH
Broad period: ROMAN
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman bow brooch fragment consisting of the lower third bow, there is a moulded knee at the top and a central groove running down the length, circular foot at the base.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
No spatial data available.


  • Thumbnail image of GLO-E8FB3F

Record ID: GLO-E8FB3F
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Aesica brooch. Rearward facing lugs on either end of the wings hold the spring support bar, the spring would have been made from about eight curls but only for are remaining, the pin is still in place. There is a loop at the top of the head for the external cord. The head of the brooch is formed form a rectangular panel whose lower corners project outwards terminating in globular stops. The front of this panel is decorated with a wide crest with a recessed centre that runs down its length. The bottom half of the brooch is truncated but would have formed from a triangular p…
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-E8E142

Record ID: GLO-E8E142
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy trumpet brooch that has an oval head plate. On the reverse is a single pierced lug that would have held the spring support bar but the loop is now truncated resulting in the loss of the spring. The bow emanates from the front of the head plate but is truncated at its apex resulting in the loss of most of the bow. There is a small rectangular tab at the top of the head that maybr the base of a loop.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of GLO-E8CB47

Record ID: GLO-E8CB47
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy trumpet brooch that has an oval head plate surmounted by a truncated loop. On the reverse are two rearward facing perforated lug that would have held the spring support bar, one is missing resulting in the loss pf the spring and pin. The bow emanates from the front of the head plate this has a central ridge running down the centre flanked by angled sides, there are two sets of low semi-circular projects on each side of the head and a moulded knee below. below the knee the remainder of the bow is truncated.
Created on: Thursday 21st February 2019
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of NLM-D447E9

Record ID: NLM-D447E9
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast hinged Colchester derivative brooch, Mackreth type CD H 3.c. Tubular wings with a double or tripled moulding on their outer ends, on the display side only, retain an axis bar for a hinged pin. The wings are clasped by a D-section bow with a single central longitudinal ridge passing down it; this is cross-cut at its upper end, possibly a feature derived from spring fastened brooches of the Polden Hill type, which this is not. Three pairs of lenticular bosses project from the mid rib at a shared diagonal angle. Only the smoothed stub of a catch plate is discerni…
Created on: Wednesday 20th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 39,145
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 39,763
  • Mean quantity: 1.016
  • Maximum: 300

Filter your search

Reece Period

1 - 20 of 39,145 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.