Back to simple search | Back to advanced search

    You searched for:

    • Medieval periodic type: 1312
    • County: Kent

  • Thumbnail image of KENT-437C38

Record ID: KENT-437C38
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and worn/abraded flat lead non-heraldic personal seal matrix of Medieval date c.AD 1200-1350. Description: The matrix is flat and circular in plan nd undecorated on the reverse. The matrix doesn't have the usual pierced lug at the top of a reserve raised ridge on the reverse or similar as seen on most matrices. Instead likely having a loop at the top of the matrix, unfortunately that part of the matrix is missing. On the front is an engraved central device depicting a crescent moon and stars, one large star in the hollow of the moon and three stars in the outer field. Th…
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-433C18

Record ID: KENT-433C18
Object type: SCRAPER (TOOL)
Broad period: IRON AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A flint flake possibly with hollow scraper blades on each edge, c.1000-1BC. Description: The flake is a tertiary flake with no cortex remaining. Along both long edges at the same point on the flake are two small concave sections with short scaled semi-abrupt retouch likely intended to create a hollow scraping edge. The bulb of percussion on the ventral side is quite pronounced as is the bulbar scar and conchoidal rippling indicating the use of a hard hammer in its production. The flint has been heavily bashed and rolled. The flint is opaque mid grey through to light brown towards its …
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-4316BA

Record ID: KENT-4316BA
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of copper-alloy vessel, likely dating between c.AD 1500- 1800. Description: The fragment is part of the rim of a cauldron or similar vessel with the rim formed by a thickened section at the top of a thin wall. There is also a vertical rough raised ridge. Both the inner and outer surface is smooth except for a section right of the vertical raised ridge. The entire fragment is heavily patinated dark green and the breaks rough. Measurements: 36.49mm long, 27.99mm high, 5.22mm thick and 14.34g in weight.
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-41BCAD

Record ID: KENT-41BCAD
Object type: JETTON
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A slightly abraded and worn copper-alloy Post-Medieval 'rose/orb' type jetton. Possibly issued by master named Wolf to c.AD 1550-1650. Obverse: Three crowns alternating with three lis, arranged centrifugally around a central rose. Legend: '+nVOnE[_]n[__]nE[____]'. Reverse: Imperial orb surmounted by a cross pattee within a double tressure of three arches and three points. Legend: '+VOL[F__]VE[___]'. Measurements: 23.37mm in diameter, 0.52mm thick 0.62g in weight.
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-415B46

Record ID: KENT-415B46
Object type: JETTON
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn and abraded copper-alloy Medieval French jetton, probably issued c.1350-1450. Possibly Arms of France 'Ancient or 'modern' type. Obverse: Shield with the arms of France on. Legend: Illegible. Reverse: Illegible. Legend: Illegible. Measurements: 18mm in diameter, 0.29mm in thickness and 0.35g in weight.
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-412B6E

Record ID: KENT-412B6E
Object type: VESSEL
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn cast foot from a Medieval or Post-Medieval c.1250-1700 Description: The object is splayed at the base in a simple, out-turned, pad-like foot of trapezoidal cross-section. There is a break at the upper end of the foot, this break has a thin sub-rectangular cross-section. The base of the foot is slightly concave. The object is significantly worn and pitted. Mottled dark green through to light green and brown. Measurements: 45.2mm long, 32.82mm high, 18.22mm thick and 87.92g in weight. Discussion: Cast cooking vessels seem to have come into use in the second half of the…
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-40C42A

Record ID: KENT-40C42A
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
Two fragments of the same copper-alloy vessel, likely dating between c.AD 1500- 1800. Description: The fragments are part of the rim of a cauldron or similar vessel with the rim formed by a thickened section at the top of a thin wall. The outer surface is rough possibly unfinished, the internal surface is however noticeably smoother. The entire fragment is heavily patinated dark green and the breaks rough. Measurements: Fragment 1: 42.87mm high, 35.3mm wide, 5.76mm thick and 26.91g in weight Fragment 2: 44.89mm high, 33.9mm wide, 5.96mm thick and 26.95g in weight Total weight: 53.…
Created on: Wednesday 13th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of PUBLIC-2FF1AB

Record ID: PUBLIC-2FF1AB
Object type: COIN
Broad period: ROMAN
County: Kent
Workflow stage: Published Find published
A Roman copper-alloy nummus of Constans (333-350) dating to the period c.347-348 (Reece period 17 ). [VIC]TORIA[E DD AVGGQ NN] reverse type depicting two facing victories holding wreaths and palm branch. Mint of Lyon. As RIC VIII, p. 181, no 57.
Created on: Tuesday 12th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded. This findspot is known as 'Sandwich', grid reference and parish protected.


  • Thumbnail image of KENT-2DFFD2

Record ID: KENT-2DFFD2
Object type: BADGE
Broad period: MODERN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast, etched and coppered sterling silver Kent Volunteer Fencibles (KVF) badge, likely dating c.1914-1918. Description: The badge has a central oval plate upon which is the incised prance horse of Kent. Above and below the oval are scrolls with 'K.V.F.' above and 'INVICTA' the motto of Kent below. These elements are coppered with the detail incised in. Framing this is a silver wreath. On the reverse is the broken pin loop, the catch plate is missing. At the bottom is the word 'STIRLING' Measurements: 24.09mm long, 23.8mm wide, 4.97mm thick (including pin loop 1.67mm thi…
Created on: Tuesday 12th February 2019
Last updated: Tuesday 12th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-2D9845

Record ID: KENT-2D9845
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete partially worn cast cast copper-alloy enamelled harness pendant dating c.AD 1200-1400. Description: The pendant is lozenge-shaped (lozengiform) in plan with an incomplete suspension loop at right angles to the face at the apex. The neck of the loop expands to a circular aperture across which the break runs. The face of the pendant is decorated with a white enamelled unicorn jumping over a white enamelled hedge or bush below and above it a white fern (heraldically speaking the unicorn could be described as 'courant'). The unicorn has a raised tail, trifurcated at the end.…
Created on: Tuesday 12th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-2D10B8

Record ID: KENT-2D10B8
Object type: BROOCH
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast small early Roman copper-alloy brooch of two part Colchester variety with a double-pierced lug, dating to c.AD 43-100. Description: The brooch has open semi-circular cross sectioned pair of wings under which the missing the spring and pin would have sat. The wings are undecorated with a prominent double pierced lug between them at the base of the bow, although this is fragment. The bow is broken just past the back of the head. The brooch is mottled light green and mottled brown colour. Measurements: Length: 11.71mm, Width: 22.17mm, Thickness: 9.13mm and Weight: 2.…
Created on: Tuesday 12th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-2CD9CD

Record ID: KENT-2CD9CD
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragmented and incomplete medieval silver short cross penny of Henry III (1216-1272), minted at Canterbury possibly Willem Ta. Class 7b/c, 1236-1242. North (1994) no. 979 or 980. Measurements: 19.11mm in Length (original diameter), 10.12mm, 0.76mm thick and 0.61g in weight,
Created on: Tuesday 12th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-2B9A81

Record ID: KENT-2B9A81
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A slightly worn silver medieval Scottish halfgroat of Robert III (1390-1406), Heavy coinage period (1390-c.1403). minted at Perth. Spink (2003) no. 5173. Measurements: 20.73mm in diameter, 0.68mm thick and 1.19g in weight,
Created on: Tuesday 12th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-2B14D6

Record ID: KENT-2B14D6
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An abraded and warped silver medieval penny of Edward I (1272-1307), Class 4d minted at London, 1286-1287. North (1991) no. 1026. Measurements: 18.96mm in diameter, 0.82mm thick and 1.10g in weight,
Created on: Tuesday 12th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-DA9645

Record ID: KENT-DA9645
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A partially worn and abraded, Medieval silver penny of Edward I (1272-1307) or Edward II (1307-1327). Minted at London, between 1307 - 1309, Class 10cf3b, North 1042/1-2. Measurements: 17.58mm in diameter, 0.51mm thick and 1.07g in weight.
Created on: Friday 8th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-DA6457

Record ID: KENT-DA6457
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A partially worn and abraded Medieval silver penny of Edward I (1272-1307). Minted at London, between 1305-1306. Class 10cf1, North (1991) no. 1040. Measurements: 16.11mm in diameter, 0.63mm in thickness and weighs 1.00g.
Created on: Friday 8th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-DA3A60

Record ID: KENT-DA3A60
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn silver penny Edward I (1272-1307), Minted at London c.1305. Class 10ab6, North (1991) No. 1039/4. Measurements: 16.90mm in diameter, 0.60mm thick and 0.99g in weight.
Created on: Friday 8th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-D97375

Record ID: KENT-D97375
Object type: COIN
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A highly worn and pitted copper-alloy Roman sestertius, c.AD 41-250, Reece Period 2-12. possibly Antonine Uncertain reverse type. Measurements: 29.51mm in diameter, 3.96mm thick and 11.97g in weight.
Created on: Friday 8th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-D94C83

Record ID: KENT-D94C83
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete but worn and slightly clipped/abraded, mistruck, post-medieval silver penny of Charles I (AD 1625 - 1649). Probably Group D, dating to AD 1639-1641. Minted at the Tower of London under Charles I, Initial mark triangle. North (1991) no.2271 Measurements: 12.60mm in diameter, 0.58mm thick and 0.44g in weight.
Created on: Friday 8th February 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-C19EFC

Record ID: KENT-C19EFC
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn and slightly abraded silver halfpenny of Henry V (1413-1422). Mint of London, North (1991) 1435, Withers (2003) no. type 8ii. Measurements: 13.6mm in diameter, 0.62mm thick and 0.45g in weight
Created on: Thursday 7th February 2019
Last updated: Thursday 7th February 2019
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 25,773
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 41,188
  • Mean quantity: 1.609
  • Maximum: 4,653

Filter your search

1 - 20 of 25,773 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.