• 

  Image not taken

Record ID: NMS-FDF930
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Middle Anglo-Saxon copper-alloy pin with globular head and an integral collared shaft. The shaft is bent once (around 70-80 degrees) and may be complete. It measures approximately 42mm from the collar at base of the head to the tapering but blunt tip. The head is almost entirely covered with punched ring-and-dot impressions. There are four on the upper hemisphere, surrounding a small slightly-flattened area directly on top (opposite the shaft), seven around the middle, and six surrounding the shaft on the underside, none of which are particularly regularly-spaced.  The shaft is …
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-FBF699
Object type: BADGE
Broad period: MODERN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy badge. Pressed metal cap badge of the Royal Artillery; all detail reversed on the back. A Crown Imperial surmounts a label with the motto UBIQUE, itself above a wheeled cannon left with sponge resting on it to the left, on a plinth, with a label below continuing the motto: QUO FAS ET GLORIA DUCUNT. A small tensile clip is concealed behind the crown. Suggested date: Modern, 1910-1920 Width: 61.6mm, Height: 46.7mm, Thickness: 0.5mm, Weight: 10.48gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NLM-F7B5AB
Object type: MOUNT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount. Pressed sheet metal fleur de lis with a basal spike, slightly concavo-convex with inwardly crimped edges, and more generally curved as if it had been fixed to a staff or rod of rounded section. A rivet projects from the centre and there is rust staining within the hollow back. Suggested date: Late Medieval, 1350-1450 Length: 17.8mm, Width: 12.0mm, Thickness: 0.6mm, Weight: 0.64gms
Created on: Wednesday 17th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Winteringham', grid reference and parish protected.

Record ID: NLM-E5109C
Object type: WEIGHT
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead weight. A small weight made by hammering an oval droplet of solidified lead melt leaving the imprint of the hammer-blow visible on one side, and then piercing a conical hole at a projecting lug from the same side. Patinated. Presumably for use with a fishing line. Suggested date: Medieval, 1200-1500 Length: 21.7mm, Width: 14.4mm, Thickness: 4.4mm, Weight: 7.75gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-E3C94D
Object type: SEAL
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
Lead bag seal. Cast disc with a slot in its edge and an opposed bifurcated slot, to function as a drawstring bag closure. Both sides bear the central motif of the Pelican in its Piety, the brand mark of Earles Cement Co. Partial legends on both sides read: [EAR]LES LIMITED. Patinated. Suggested date: Modern, 1900-1950 Diameter: 21.1mm, Thickness (at edge): 7.5mm, Weight: 10.07gms
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D07466
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Complete early Anglo-Saxon copper-alloy small-long brooch, now in two joining parts. The head is of the 'cross potent' type, with a flat rectangular central panel c. 13 x 18mm. This has three sub-rectangular flat 'knobs' attached by narrower waists, to form a headplate in total 32.2mm wide. The surface is corroded and some is missing, but traces of double-crescent or half ring-and-dot stamps can be seen; there is a row of five on the top knob and a similar row on one side knob, each with a trace of a single groove outside the row of stamps. On the reverse of the headpla…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: NLM-5540C3
Object type: THIMBLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy thimble. Cast open-topped thimble or sewing ring with four or five horizontal rows of hand-stamped pits, possibly in a right hand spiral arrangement ascending the wall. Suggested date: Late Medieval, 1400-1500 Diameter: 19.1mm, Height: 11.3mm, Thickness: 1.5mm, Weight: 5.40gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: NLM-53EE38
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible mount fragment. A pressed metal concavo-convex decorative plate of rhomboid form overall representing stems at the top over four florets and with three small leaves below, all these details appearing reversed on the back. Suggested date: Post-Medieval, 1850-1900 Length: 29.5mm, Width: 16.8mm, Thickness: 0.5mm, Weight: 0.87gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Caistor', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-51B902
Object type: THIMBLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy thimble of Medieval date. The fragment comes from the top of the timble, and has one small central stamped indentation at the top, the sides are decorated with small, widely spaced circular indentations in irregular vertical rows. It is corroded.  Diameter: 17.34mm Weight: 1.58g
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: NLM-4F72CC
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy book clasp. A pair of plates of thickness 1.1mm, the outermost with straight sides and with a short U-shaped lug at one end, expanded and bifurcated towards a fishtail terminal at the other, where it is raggedly torn by rough removal from its setting. Howsam Class A.3. A plain subsidiary plate, perhaps a reinforcement or from the inner side of a book cover, is aligned with the main part of the object at its narrower end. Four stamped double ring and dot of diameter 7.1mm appear on the display side, two on the narrower part and one apiece on the branching or bifurcated fish…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: NLM-4EC586
Object type: SPOON
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Lead alloy spoon fragment. Cast handle from a teaspoon or similar, with moulded ovulos aligned down the centre line of its display side in a linear series which is continued by two or more stamped dots; bowl lost and terminal chipped. The metal is particularly pliable, so this was perhaps homemade. Suggested date: Post-Medieval, 1675-1775 Length: 61.7mm, Width: 10.7mm, Thickness (at lower stem): 2.3mm, Weight: 4.34gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Enbsay', grid reference and parish protected.

Record ID: SF-E85102
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle with integral (rigid) plate of Medieval date. It is broadly trapezoidal in form, with an incised notched pin rest on the outer edge, a circular hole for the now missing pin below the frame. It has a stamped dot pattern across the plate in repeating lines, before terminating in an old break. It is undecorated on the reverse.  Length:29.09mm Width: 21.92mm Weight: 3.66g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

Record ID: NLM-D624A3
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin weight, as kindly identified by the finder. Cast square uniface weight with an indeterminate motif within a circular panel struck on one side only. The uniface square weight is usually of Low Countries or German origin and of 16th or 17th-century date. Some checked the weight of the Angel gold coin or its subdivisions (Withers and Withers 2011, page 27). Suggested date: Post-Medieval, 1500-1650 Length: 13.8mm, Width: 13.7mm, Thickness: 1.9mm, Weight: 2.54gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: NLM-D4C9DE
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy thimble. A small conical pressed metal thimble with a plain basal zone and machine-stamped pits on its wall which appear as if arranged in horizontal rows. A rectilinear grid or lattice of larger pits covers the domed top. Suggested date: Post-Medieval, 1850-1900 Height: 13.5mm, Diameter: 13.3mm, Thickness (wall): 0.7mm, Weight: 1.51gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'South Owersby', grid reference and parish protected.

Record ID: NLM-D4522B
Object type: FERRULE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy ferrule or mount. A tubular and probably stamped binding mount from a whip stock, cane or similar, of cylindrical or tubular form with butted seam, now flattened. Vegetal curls appear against a finely vertically lined ground within narrow upper and lower borders. A fixing hole of diameter 2mm appears close to one edge (as found). Suggested date: Post-Medieval, 1850-1900 Length: 12.6mm, Width: 16.1mm, Thickness (overall as found): 2.1mm, Weight: 2.42gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: WREX-39083C
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Wrexham
Workflow stage: Published
Welsh Treasure Case: T21:36 Description & identification The reported object is a flat silver ‘swivel’ fob seal matrix. It is formed of an irregular flat C-shaped frame with a decorated handle and integral suspension loop. A double-sided decorated octagonal bezel rotates within the frame. The handle is decorated on both sides with crude scroll-work engraving. The two bezel faces bear a different motif design, formed of engraved and stamped elements. One motif is a crudely executed hand, emerging from a cuff holding three stemmed flowers. On the opposing face are two st…
Created on: Wednesday 29th September 2021
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Gwersyllt', grid reference and parish protected.

Record ID: DENO-ED091F
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
A cast copper alloy closed thimble of post-medieval date, c. AD 1725-1900. The object is closed and sub-conical in form with with a shallow rounded top and a thin thickened and plain rim at the base. The rim and lower thimble are damaged with a small arch-shaped fragment missing in a jagged break. The indentations in the wall are small, circular and regularly spaced. The convex top has slightly larger square indentations arranged in a grid pattern. The sides are straight and slope slightly to the top. The metal's surface has a dark green patina. …
Created on: Thursday 6th October 2022
Last updated: Wednesday 27th March 2024
Spatial data recorded.

Record ID: NLM-2C4D67
Object type: MOUNT
Broad period: MODERN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount, as kindly identified by the finder. A small pressed metal plate with a leaf-shape flanked by pellets nested in spirals and with a row of pellets above; all details appearing reversed on the back. Green colorant, perhaps enamel or paint, appears on the protruding rounded parts of the motif. Presumably this was set in to a flat surface. Suggested date: Modern, 1900-1920 Length: 14mm, Width: 11mm, Thickness: 0.8mm, Weight: 0.45gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-2B2C99
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy button. Die-stamped discoid front with hollow back retaining a drawn wire loop. The front bears the image of a thistle with its head flanked by its leaves within a border line. Suggested date: Post-Medieval, 1850-1900 Diameter: 13.1mm, Height (overall): 8mm, Weight: 1.11gms
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded. This findspot is known as 'Broughton', grid reference and parish protected.

Record ID: NLM-146E89
Object type: THIMBLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy thimble. Cast beehive-shaped thimble with a plain basal zone and hand-stamped pits which ascend the wall in a left hand spiral arrangement which is carried onto the domed top, though leaving a central unworked zone. Polished overall by wear in use. Suggested date: Late Medieval, 1400-1500 Diameter: 19.0mm, Height: 20.8mm, Thickness (wall): 1mm, Weight: 5.28gms
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.