Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Surface: Inlaid with other or unknown

  • Thumbnail image of GLO-F9BFA6

Record ID: GLO-F9BFA6
Object type: STRAP END
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy composite strap end made from two sheets that are riveted together via a single central copper alloy rivet, unfortunately one sheet is now missing. There is an off centre knop on the forward edge. the rear if the strapend is truncated and bent.
Created on: Tuesday 27th October 2015
Last updated: Tuesday 27th October 2015
Spatial data recorded.


  • Thumbnail image of GLO-F99234

Record ID: GLO-F99234
Object type: PURSE
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy purse bar fragment consisting of the swivel block and part of the loop. The loop would have been oval but only the base remains, At the bottom of the loop there is a flat collar which is integral with the shank. Attached to the end of the shank is a separate bi-conical copper-alloy domed rove The swivel block is sub rectangular with a rounded base, one side is decorated with a single vertical line that has a digital line on both sides, forming a downward pointing arrow these lines are inlaid with silver, the other side of the block is undecorated. Short projecting arms …
Created on: Tuesday 27th October 2015
Last updated: Tuesday 27th October 2015
Spatial data recorded.


  • Thumbnail image of LANCUM-E72971

Record ID: LANCUM-E72971
Object type: BROOCH
Broad period: IRON AGE
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy mount or knop, possibly part of a brooch dating from the Middle or Later Iron Age, that is 600BC-AD43. The object is composed or a moulded copper alloy casing with a circular coral inlay, The casing is dome-shaped with moulded ribs on the outside. There may have possibly been some inside hatching on some of the ribs/bands. The coral, now of light pink/skin colour, is much degraded. It looks as if it was a single piece into which a circular hole was drilled. It was then attached to a short lug on the inside of the casing. At the back of the lower section is a central shal…
Created on: Sunday 2nd August 2015
Last updated: Thursday 13th August 2015
Spatial data recorded. This findspot is known as 'Bagby', grid reference and parish protected.


  • Thumbnail image of DENO-82E082

Record ID: DENO-82E082
Object type: MOUNT
Broad period: POST MEDIEVAL
County: City of Derby
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy possibly post-medieval (AD c.1540-c.1900) possible mount, missing a corner and a stone inlay. Overall, the object is broadly triangular in shape and measures 25.8mm long, 27.1mm wide and 4.3mm thick. It weighs 4.4g. The object is divided into two parts, each containing a setting for an inlay. One part is roughly heater shield shaped and contains a green stone. The second part is incomplete but appears to have been in the shape of an isosceles trapezium. The setting is missing its stone. The edges of the object are bevelled. The reverse is mostly flat but ther…
Created on: Friday 29th May 2015
Last updated: Friday 29th May 2015
Spatial data recorded.


  • Thumbnail image of NMS-7B0FBE

Record ID: NMS-7B0FBE
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Silver dress fastener eye plate of Read (2008) Class B. Crescent-shaped plate decorated with filigree, consisting of a twisted wire border around an abstract design, probably two flowers with long stamens in a pot. There are very slight traces of possible inlay in at least one of the twisted wire cells forming the design. A single piece of wire is bent to form two attachment loops and the eye and soldered to the reverse. Slight traces of gilding survive. Length 16mm Width 13mm. Weight 0.6g. Broadly similar to NMS-D26CB2 (Wendling, Norfolk, HER42701), LVPL-859AC5 and KENT-3F6696. 1500 - 1600.
Created on: Friday 10th April 2015
Last updated: Monday 21st December 2015
Spatial data recorded. This findspot is known as 'Mundham', grid reference and parish protected.


  • Thumbnail image of NLM-8D1298

Record ID: NLM-8D1298
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy possible mount fragment. Plano-convex object of dense black metal, with deep longitudinal grooves on both its flat and its convex faces. The former might suggest an identification as a broken bead, but the groove does not appear to have been drilled and does not appear, at least in its present form, broad enough to admit a string. The groove on the convex surface is flanked by two sets of lightly incised lines forming rectilinear grids with at least five rows of cells, now highlighted by inlaid white material. The dark material of this object resembles that of a number of…
Created on: Monday 9th February 2015
Last updated: Wednesday 18th March 2015
Spatial data recorded. This findspot is known as 'Authorpe', grid reference and parish protected.


  • Thumbnail image of DOR-4EE9CA

Record ID: DOR-4EE9CA
Object type: STUD
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy and silver stud of probable late Iron Age or early Roman date (.c 200 BC - 100AD). The stud consists of a lozengiform head with a slightly domed obverse and a flat reverse. The obverse of the head features a lozengifrom silver inlay incised with a design of three sprials curving in different directions. The silver has become discoloured and has a black patina. The cylindrical shaft projects from the reverse of the head and features a square piece of copper alloy sheeting mounted on the shaft through a circular perforation. The corners of the sheeting are slightly bent. …
Created on: Monday 20th October 2014
Last updated: Tuesday 15th December 2015
Spatial data recorded. This findspot is known as 'Berwick St John', grid reference and parish protected.


  • Thumbnail image of NLM-CE3512

Record ID: NLM-CE3512
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle fragment, as kindly identified by Rob Webley, who comments as follows: 'I'm fairly sure this is a (high) medieval buckle. They are characterised by a long pin groove (often a point of break) and a combination of engraved linear decoration and small punched annulets, cf. KENT-245C95 for an example'. Cast object with a tapered hook at one end, flat at the other. One long edge, that lying on the outer edge, is of angled or V-section form. One flat side is divided into compartments by five or more vertically incised lines with further diagonal and horizontal strokes, w…
Created on: Tuesday 14th October 2014
Last updated: Thursday 7th May 2015
Spatial data recorded.


  • Thumbnail image of LVPL-01A124

Record ID: LVPL-01A124
Object type: MOUNT
Broad period: ROMAN
County: Cheshire East
Workflow stage: Awaiting validation Find awaiting validation
A cast copper probable mount of a vesica or eye- shaped dating to the Roman period, (AD43-410). The object is oval in plan and D-shaped in cross-section. The centre of the object is raised and flat and is inlaid with four triangles of blue glass. The glass forms a flower-like design. The edges of the object are 'crimped' with ridges of copper alloy radiating outwards from the central design. The edges of the object are incomplete due to both recent and ancient damage and there is no trace of the hinge remaining. The rear of the object is undecorated and is slightly hollow. The blue ena…
Created on: Tuesday 17th June 2014
Last updated: Wednesday 22nd July 2015
Spatial data recorded. This findspot is known as 'Doddington', grid reference and parish protected.


  • Thumbnail image of WILT-906922

Record ID: WILT-906922
Object type: BROOCH
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Iron Age or Roman brooch dating to 200 BC - AD 200. The catchplate is incomplete and the pin is missing. The brooch is broadly lozenegeform in plan and is formed on the front face from four concave circular recesses, the two main circular sections are 8.7mm in diameter and are flanked by two smaller circular projections to the top and bottom which are 6.7mm in diameter. The two main sections both contain a circular perforation in the centre which would have contained a rivet to hold the now missing inlay. The two smaller projections have similar perforations,…
Created on: Tuesday 6th May 2014
Last updated: Tuesday 31st March 2015
Spatial data recorded.


  • Image not taken

Record ID: SWYOR-7346E4
Object type: RELIQUARY
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Published Find published
A gold post medieval reliquary crucifix of Post-medieval date (AD1500-1800). The object is in the form of a hollow cross with integral and incised decoration on all surfaces. Each of the ends of cross have a stylized leaf quatrefoil with a central, projecting knop with the exception on the uppermost end from which a circular suspension loop projects. The front of the object shows the figure of Christ with a crown of thorns, radiate crown and loincloth; the nails are visible going through the hands and the crossed feet. Above the figure an incised rectangular border runs around the ins…
Created on: Thursday 28th November 2013
Last updated: Monday 7th December 2015
Spatial data recorded. This findspot is known as 'Skellow', grid reference and parish protected.


  • Thumbnail image of WILT-F3A687

Record ID: WILT-F3A687
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Description: Gold finger-ring with organic inlay possibly of wood or bone. The inlay is surrounded by a beaded gold boarder. Hoop Width: 3.8 mm Hoop Thickness: 1.6 mm Weight: 1 g Discussion: Due to the undiagnostic nature of the find it cannot be securely dated to pre-1713 and as such falls outside the provisions of the Treasure Act 1996. Judy Rudoe Curator, Post-Medieval Collections The British Museum
Created on: Wednesday 5th June 2013
Last updated: Thursday 12th November 2015
Spatial data recorded.


  • Thumbnail image of NLM-1041B5

Record ID: NLM-1041B5
Object type: PIN
Broad period: BRONZE AGE
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Possible Picardy Pin of Bronze Age date, as kindly identified by Amy Downes with reference to GLO-439E61. The discussion of that object considers the object likely to have fastened a cloak, with the cup-shaped receptacle at its end intended to hold a decorative stone. The stubs at the other end would in this case relate to some supplementary means of attachment - they are features absent from the object reported from Gloucestershire. Cast bobbin-shaped rod of round section, slightly expanded towards the mid shaft to a maximum diameter of 9.3mm, with an open round cup at …
Created on: Tuesday 7th February 2012
Last updated: Monday 19th October 2015
Spatial data recorded. This findspot is known as 'Roxby', grid reference and parish protected.


  • Thumbnail image of NLM-563A33

Record ID: NLM-563A33
Object type: MORTARIUM
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published Find published
Pottery Mortarium fragment. Crambeck Ware; rim sherd in a white fabric with dark grits on the inner grinding surface. Suggested date: late Roman, 300-400. This sherd was kindly identified by Helen Fry, Sandra Firth and Hazel West of the North Lincolnshire Pottery Research Group. Weight: 34.79gms.
Created on: Tuesday 19th July 2011
Last updated: Wednesday 18th November 2015
Spatial data recorded. This findspot is known as 'Brookenby', grid reference and parish protected.


  • Thumbnail image of SUR-F64366

Record ID: SUR-F64366
Object type: COIN
Broad period: ROMAN
County: Surrey
Workflow stage: Awaiting validation Find awaiting validation
A radiate of Diocletian. Rev. Jupiter holding Victory
Created on: Wednesday 25th April 2007
Last updated: Tuesday 23rd June 2015
Spatial data recorded.


  • Thumbnail image of SUR-F63406

Record ID: SUR-F63406
Object type: COIN
Broad period: ROMAN
County: Surrey
Workflow stage: Published Find published
A radiate of Carausius (AD 286-93) (Reece Period 14), probably [LEG VII CL or LEG VIII AVG], Bull standing right. London. This coin has been considered for Sam Moorhead's corpus for RIC.
Created on: Wednesday 25th April 2007
Last updated: Wednesday 1st July 2015
Spatial data recorded.


  • Thumbnail image of CORN-43FB05

Record ID: CORN-43FB05
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Cast lead conical fishing weight, with corroded copper alloy ring at its pointed top end which was probably part of a brass eye to attach the weight to a fishing line, rather than a net. 19th-20th century
Created on: Sunday 13th March 2005
Last updated: Monday 18th May 2015
Spatial data recorded. This findspot is known as 'Padstow', grid reference and parish protected.


  • Thumbnail image of KENT-D16B03

Record ID: KENT-D16B03
Object type: WEIGHT
Broad period: UNKNOWN
County: Kent
Workflow stage: Published Find published
Rectangular lead weight (probably), with inlaid metal (iron?) wavy line on both sides. Ddate uncertain. See HAMP3681 on this database.
Created on: Thursday 6th January 2005
Last updated: Tuesday 20th October 2015
Spatial data recorded.


  • Thumbnail image of BERK-079210

Record ID: BERK-079210
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A 10th-11th Century cloisonne enamel copper-alloy disc brooch. The brooch has seven equidistant rounded projections (lobes). On each of these lobes a collar of copper-alloy strip has been soldered. Inset into four of the collars is a sphere of transluscent glass; 2 are dark blue, 1 is pale blue and 1 is white. The spheres are missing from the other 3 lobes. On the main body of the brooch a collar (again copper-alloy strip) has been soldered and inset into this is the cloisonne enamel disc. The pattern consists of five sub-triangular green/blue glass 'petals' (set within copper-alloy ce…
Created on: Friday 3rd December 2004
Last updated: Tuesday 28th April 2015
Spatial data recorded. This findspot is known as 'St Helen Without', grid reference and parish protected.


1 - 19 of 19 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.