Back to simple search | Back to advanced search

    You searched for:

    • Show this many records per page: 40
    • Workflow: Record published

  • Thumbnail image of PAS-4EA424

Record ID: PAS-4EA424
Object type: FINGER RING
Broad period: UNKNOWN
County: Oxfordshire
Workflow stage: Published Find published
A complete but distorted gold finger ring set with a carnelian in an oval bezel. The hoop is 1.2mm wide and ovoid in section, widening to flat triangular terminals where it is joined to the bezel. This join is strengthened by a strip of gold wrapped round the ends of the hoops. The back of the bezel is an applied flat plate, with a central circular pierced hole. The raised oval setting is formed from another sheet of gold folded and pinched at the top of the oval. Around it at the base is a border of twisted gold wire, with filigree beaded wire above this. The carnelian is oval with a …
Created on: Friday 21st September 2018
Last updated: Friday 21st September 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-2555EA

Record ID: PUBLIC-2555EA
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Published Find published
An incomplete copper-alloy Roman radiate, contemporary copy of a coin of Tetricus I (AD 271-274), dating to the period AD 275-285 (Reece Period 14). PA[X AVG] reverse type depicting Pax standing left holding branch and vertical sceptre? Unclear mint. Cf. Normanby no. 1951.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded. This findspot is known as 'Nr Codicote', grid reference and parish protected.


  • Thumbnail image of YORYM-FCA45C

Record ID: YORYM-FCA45C
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Claudius II (AD 268-270), dating to the period AD 268-270 (Reece period 13). VBE[RITAS AVG] reverse type depicting Uberitas standing left holding purse and cornucopiae. Mint of Siscia. As Normanby no. 1102.
Created on: Monday 17th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-FBE11E
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Very worn and incomplete Roman copper alloy Colchester Derivative, rear hook brooch (Mackreth, 2011, type CD RH). Broken rear-hook and C-sectioned wings, one a stump, the other incomplete, spring missing. oval-sectioned bow with slight traces of vertical mouldings at upper end. Foot and catchplate missing. Extant wingspan 16mm. Extant length 27.5mm. AD 43 - 60.
Created on: Monday 17th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-CC6BD1

Record ID: FAKL-CC6BD1
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Copper alloy Medieval (c. 1250-1400) swivel strap fitting. Fragment only consisting of the eye through which a stud passed to form the swivel, only the two stubs of the loop survive, one of which is marked by an oblique, inclsed line. The underside of the eye is recessed. Length 20.4mm, Width 7.6mm, Height 7.0mm, Mass 2.03g.
Created on: Saturday 15th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-BCEB7D

Record ID: FAKL-BCEB7D
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy Roman (c. 60-150) brooch of 'Trumpet' type represented only by the loop and rosette once fixed to the head of the brooch. This consists of a 14.0mm diameter, diamond sectioned ring the ends of which taper and pass through two holes in a rectangular plate on the underside of the rosette after which they are splayed out. The rosette is circular and contains a conical central boss surrounded by radiating petals. Length 21.7mm, Width 21.1mm, Height 9.1mm, Mass 3.10g.
Created on: Friday 14th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-BC95A3

Record ID: FAKL-BC95A3
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Cast lead spindle whorl of possible Early Medieval (720-850) date. The whorl is plan-convex with a slighly concave underside. Through it is a 7.0 x 5.0 centrally set, hole. Its face bears a pattern of angled, raised bar and the intention might have been to suggest runes although no coherent letters can be defined. Diameter 30.0mm, Height 15.4mm, Mass 53.32g. This whorl can be place in Walton Rogers (2007, 24-25). Type A1 which she dated to the Middle Anglo-Saxon period. The type was found at Flixborough, North Lincolnshire (Walton Rogers in Evans and Loveluck, 2009, Fig. 9.3 and can b…
Created on: Friday 14th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-BC362B

Record ID: FAKL-BC362B
Object type: COIN
Broad period: IRON AGE
County: Worcestershire
Workflow stage: Published Find published
Silver Iron Age unit of the Western Region Dobunni, dating to the period AD 20-43 issued by the ruler Antedios. Cottam et al.'s 'Anted silver unit' (ABC 2072) with reverse featuring the ruler's name.Obverse: highly stylised profile face the hair represented by two rows of close-set pellets. Reverse: Triple tailed horse, advancing left, mane made up of close set pellets, pellets in front and behind horse, above the horse is the inscription [an] TED. Diamter 13.2mm, Mass 0.51g.
Created on: Friday 14th September 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of WMID-BC0555

Record ID: WMID-BC0555
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Doncaster
Workflow stage: Published Find published
An Early Medieval silver penny of Harold II (AD 1066). PAX type (North 836) dating to 6th January to 14th October AD 1066. Minted at Oxford by Aelfwig. Ref: North 1994: 182. Overall dimensions: 18.57mm in diameter and 1.31g in weight.
Created on: Friday 14th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of SUR-A5A4CE

Record ID: SUR-A5A4CE
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published Find published
A copper-alloy Roman as of Hadrian (AD 117-138), dating to the period c.AD 128 (Reece period 6). COS III, S C reverse type depicting Salus, draped, standing right, feeding out of patera in left hand snake held in right hand. Mint of Rome. This is a probably coin of British Association similar to exampes published from the Sacred Springs at Bath, cf. BMC 1380; RIC II, p. 469, no. 975b; Walker, p. 293, nos. 1-52, pl. XXXIII.
Created on: Thursday 13th September 2018
Last updated: Thursday 20th September 2018
Spatial data recorded.


  • Thumbnail image of SUR-A0EE8A

Record ID: SUR-A0EE8A
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Published Find published
A fragment of a copper alloy Roman Polden Hill brooch of Mackreth 2011, Chapter 3, Part 3, CD PH 5.a4. The fragment comprised the spring and hinge together with the arms and a portion of the bow, which is decorated with moulded ridges in the form of a central ridge with three narrow ridges to each side. The pin and catchplate are missing. It is 21.7mm in length. Dating late 1st century AD.
Created on: Thursday 13th September 2018
Last updated: Monday 17th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8F0309

Record ID: FAKL-8F0309
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Published Find published
Lead token of Medieval to Post Medieval date (1300-1750), the face bears, in deep relief, an incoherent pattern of large dots. The back is plain and slightly convex suggesting that it has been cast in an open mould. Diameter 17.5mm, Thickness 2.7mm, Mass 4.39g. With some justification, Ivor Noel Hume described lead tokens as 'that least understood item in the numismatic field' (Artifacts of Colonial America, 1969, 173). He was able to quote exampes ranging in date from a piece bearing the arms of Elizabeth I (1558-1603) to one bearing a date of 1714. That said, other examples come fro…
Created on: Wednesday 12th September 2018
Last updated: Friday 14th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8EF204

Record ID: FAKL-8EF204
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Published Find published
Lead token of Medieval to Post Medieval date (1300-1750), the face bears, in deep relief, a cross in the arms of which are set four pellets, the arrangement seen on Medieval silver coins. The back is plain and slightly convex suggesting that it has been cast in an open mould. Diameter 20.4mm, Thickness 3.6mm, Mass 7.49g. With some justification, Ivor Noel Hume described lead tokens as 'that least understood item in the numismatic field' (Artifacts of Colonial America, 1969, 173). He was able to quote exampes ranging in date from a piece bearing the arms of Elizabeth I (1558-1603) to o…
Created on: Wednesday 12th September 2018
Last updated: Friday 14th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8ECC9E

Record ID: FAKL-8ECC9E
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Published Find published
Lead token of Medieval to Post Medieval date (1300-1750), the face bears a pattern of irregular lines radiating out from the centre. The back is plain, and its smooth surface suggest that it has been finished after casting. Diameter 23.6mm, Thickness 1.9mm, Mass 7.56g. With some justification, Ivor Noel Hume described lead tokens as 'that least understood item in the numismatic field' (Artifacts of Colonial America, 1969, 173). He was able to quote exampes ranging in date from a piece bearing the arms of Elizabeth I (1558-1603) to one bearing a date of 1714. That said, other examples …
Created on: Wednesday 12th September 2018
Last updated: Friday 14th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8E9B24

Record ID: FAKL-8E9B24
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Published Find published
Cast copper alloy Roman brooch of Polden Hill type, Mackreth 2011, Chapter 3, Part 3, CD PH 4.d., A.D 75-150. Between two vertical ridges on the upper bow is a panel of stamp impressions. The wings are separated from the bow by two raised, circular panels, the wings are semi-circular and hollow with circular plates at each end through which are holes for the axial pin. Length 55.7mm, Width 26.2mm, Height 18.6mm, Mass 14.40g.
Created on: Wednesday 12th September 2018
Last updated: Thursday 13th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8E37B9

Record ID: FAKL-8E37B9
Object type: HARNESS MOUNT
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Published Find published
Cast copper alloy mount, probably from a horse harness of Post Medieval to recent date. The mount is in the form of a hollow boss decorated with concentric rings of reducing size. At the apex is an annular groove containing a small boss. While the object was cast, circumferential lines show that it had finished on a lathe. This object is impossible to date and can only be placed in the range 1600-1900. Diameter 48.2mm, Height 14.6mm, Thickness (section) 1.5mm, Mas 23.44g.
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8DFB7C

Record ID: FAKL-8DFB7C
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Cast lead disc bearing a raised pattern of straight lines resembling lettering which makes no sense. The back of the disc is flat but with raised rim. A Post Medieval date seems likely but the function of this disc is unknown. Diameter 45.7mm, Thickness 4.8mm, Mass 39.71g.
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8D8CA8

Record ID: FAKL-8D8CA8
Object type: BUCKLE
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Cast copper alloy, Medieval (c. 1390-1420). Socket from a buckle of 'lyre' type, the only traces of the open frame being present. The socket is trapezoid and separated from the frame by a transverse groove. Its face bears what appears to be a pseudo-black letter inscription. Through the socket are two rivets which secured it to the belt. Buckles of this form were found at Meols, (Griffiths et al 2007, 102-103, Pl. 17, No 765) which was assigned to the Late Medieval period. Marshall, however, (1986, 11-12) was, on basis of depictions on monumental brasses, able to suggest a closer date …
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8D0D18

Record ID: FAKL-8D0D18
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy Roman sestertius of Faustina II (AD 145-176) Reece Period 8, Diana issue, inscription lost on both faces, Obverse: bust of Faustina, right, Reverse: Diana advancing right with an arrow and bow flanked by S C. Coin struck under Antoninus Pius, 145-161, RIC 1383. Diameter 30.1mm, Mass 14.44g.
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8CD4B0

Record ID: FAKL-8CD4B0
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Cast copper alloy fitting, possibly a Post Medieval handle from a piece of furniture or a Late Medieval buckle frame. C shaped with an expanded centre decorated with four transverse mouldings, two larger mouldings flanking two smaller. Either side of this are zones of fine, transverse grooves associated with which is what appears to be a 1.5mm long piece of silver wire. The decoration extends around the fitting. Its surviving end is expanded before narrowing again. The function of this object is uncertain and while its extended form can be paralleled on Late Medieval buckles (Egan and …
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-8C6BEE

Record ID: FAKL-8C6BEE
Object type: SWORD
Broad period: EARLY MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Cast copper alloy pommel cap from an Early Medieval, tenth century, Viking sword, Petersen Type S, Wheeler Type III, (Peirce, 2002, 102-107). The cap is lentoid and in the from of five conjoined lobes, reducing in size from the centre through which is a hole to accomodate the rivetted end of the tang. The cap is hollow and incomplete, most of one side is missing and there is a hole in one of the lobe. As is it difficult to see how this damage occurred it is possible that the cap was mis-cast. Length 62.8mm, Width 18.0mm, Height 23.6mm, Metal section 4.4mm thick. Mass 39.10g
Created on: Wednesday 12th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-7E0AB5
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Incomplete Roman copper alloy Colchester Derivative Harlow brooch, part of the pin and all below the upper bow missing. The wings are plain and there are three grooves on what remains of the bow. Wingspan 22.5mm. c.43 - c.75 AD.
Created on: Tuesday 11th September 2018
Last updated: Friday 14th September 2018
Spatial data recorded.


  • Thumbnail image of KENT-7D2A61

Record ID: KENT-7D2A61
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
A corroded copper-alloy Roman nummus, contemporary copy of the House of Constantine, dating to the period c.AD 330-340 (Reece period 17). VRBS ROMA reverse type depicting a She-wolf suckling twins. Unclear mint. Measurements: 11.21mm in diameter, 1.31mm thick and 0.58g in weight
Created on: Tuesday 11th September 2018
Last updated: Thursday 20th September 2018
Spatial data recorded.


  • Thumbnail image of NCL-7D1AAB

Record ID: NCL-7D1AAB
Object type: COIN
Broad period: ROMAN
County: Cumbria
Workflow stage: Published Find published
A copper-alloy Roman nummus of Constantine I (AD 306-337), dating to the period AD 310-312 (Reece period 15). CONCO-R-D MILIT reverse type depicting Concordia standing left holding two standards. Mint of London. This is a variant of RIC VI, p. 136, no. 195. The type is published by Cloke and Toone (2015: pp. 176-177, no. 7.04.007), who note seven examples from just two obverse dies. Weight 3.04g; Diameter 22.95mm; Thickness 1.95mm;
Created on: Tuesday 11th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-7C732D
Object type: POT
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Rim sherd of a Roman greyware pottery jar, odd form with a groove around base of the short neck and with a flat top, weight 8.5g, mid 1st - 4th century.
Created on: Tuesday 11th September 2018
Last updated: Friday 14th September 2018
Spatial data recorded.


  • Thumbnail image of LEIC-7BF00D

Record ID: LEIC-7BF00D
Object type: COIN
Broad period: IRON AGE
County: Leicestershire
Workflow stage: Published Find published
An incomplete silver Iron Age unit of the North Eastern Region / Corieltavi, dating to the period c.50-20 BC, South Ferriby Plain type. Obverse: Plain or damaged die with possible traces of a boar. Reverse: Horse right, double upper legs, pellet ring above. As ABC p. 95, no. 1803; Hobbs nos. 3218-3227, 3230-3232.
Created on: Tuesday 11th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded. This findspot is known as 'Melton', grid reference and parish protected.


  • Thumbnail image of LEIC-786CF7

Record ID: LEIC-786CF7
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Published Find published
A silver Roman denarius of Commodus (AD 180-192), dating to the period AD 181 (Reece period 9). TR P VI IMP IIII COS III P P reverse type depicting Providentia standing left holding wand over globe and vertical sceptre. Mint of Rome. As RIC III, p. 368, no. 19.
Created on: Tuesday 11th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of IOW-6D3AD5

Record ID: IOW-6D3AD5
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published Find published
A complete Roman silver denarius of Antoninus Pius (AD 138-161), dating to the period AD 140-143 (Reece period 7). AEQVITAS AVG reverse type depicting Aequitas standing left holding scales and sceptre. Mint of Rome. Obverse: ANTONINVS AVG PI-VS P P TR P COS III; Laureate head right. Reverse: AEQVI-TAS AVG; Aequitas standing left holding scales and sceptre. Diameter: 18.4mm. Weight: 2.75g. DA=12:6. As RIC III, p. 33, no. 61c.
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-6D1CC1

Record ID: IOW-6D1CC1
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published Find published
A complete Roman copper-alloy sestertius of Commodus (AD180-192) as Caesar under Marcus Aurelius, dating to the period AD 179 (Reece period 8). IMP II/III COS II P P, S C reverse type depicting Minerva standing left dropping incense on an altar, resting left hand on shield, spear against left arm. Mint of Rome. Obverse: [...]; Laureate head right. Reverse: [IMP II/III COS II P P]; S C, Minerva standing left dropping incense on an altar, resting left hand on shield, spear against left arm. Diameter: 28.6mm. Weight: 19.13g. DA=12:6. As RIC III, p. 342, nos. 1599, 1607.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-6CFA12

Record ID: IOW-6CFA12
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Published Find published
A complete and corroded Roman copper-alloy dupondius or as of unclear probably Antonine ruler, dating to the period c. AD 138-192. Unclear reverse type. Obverse: [...]; Unclear bust right. Reverse type is illegible. Diameter: 25.6mm. Weight: 9.18g. DA=12:6 (possibly). It is possible that the ruler could be Antoninus Pius or even Faustina I.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of FAKL-6995C5

Record ID: FAKL-6995C5
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Cast copper alloy Roman brooch of 'Trumpet' type, 1st - 2nd century date, poor condition, the foot is missing and there is much loss of its original surface, the scrolled moulding on the upper part of the bow being almost lost. The bow is decorated with a central, transverse moulding flanked by two deep grooves and two smaller mouldings. The decorative details of the lower foot are lost. On the end of the bow is a disc-like projection bearing a deep, annular groove which contains traces of what may have been enamel. The underside of the 'trumpet' is hollow to a depth of 10mm. On either…
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-694837

Record ID: FAKL-694837
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy nummus of the House of Constantine (348-364) (Reece Period 18). FEL TEMP REPARATIO, reverse depicting a soldier spearing a horseman, AD 348-353. Condition poor with much loss of the edge and obverse surface. Diameter 17.4mm, Mass 2.35g.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-689226

Record ID: FAKL-689226
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Copper alloy dress hook, Post Medieval (1600-1700), leaf shaped, cast in low relief with a central plant/flower motif, rectangular eye to accomodate the hook, three attachment loops. cf. Read 2008, 175-177. Length 35.6mm, Width 18.8mm, Thickness 1.8mm, Mass 3.81g.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-686572

Record ID: FAKL-686572
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Copper alloy brooch, Roman, 1st to 2nd century, T shaped type, poor condition with much loss of surface, end of foot missing, details of bow lost, plain, tubular wings with a central recess to accomodate a self-tensioned pin. Length 18.5mm, Width 15.2mm, Height 7.8mm, Mass 2.17g.
Created on: Monday 10th September 2018
Last updated: Tuesday 11th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-6814AA

Record ID: FAKL-6814AA
Object type: COIN
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Published Find published
Silver groat of Edward III (1327-1377) London mint, Standard Type G, North 1205-1221 Obverse: Crowned bust, facing, EDWARD D G REX ANGL F FRANC D HYB, annulet stops, slightly double struck. Reverse: Long cross, POSVI /DEVM A/DIVTOR/EM MEV // CIVI/TAS/LON/DON (annulet stops)
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-67854C

Record ID: FAKL-67854C
Object type: TOKEN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Published Find published
Lead unifaced token of Medieval or Post Medieval (1300-1750) date. The face bears a five petalled flower formed by intersecting arcs, the back is flat, suggesting a rolled, not cast surface. Diameter 17.7mm, Thickness 0.9mm, Mass 1.72g. With some justification, Ivor Noel Hume described lead tokens as 'that least understood item in the numismatic field' (Artifacts of Colonial America, 1969, 173). He was able to quote exampes ranging in date from a piece bearing the arms of Elizabeth I (1558-1603) to one bearing a date of 1714. That said, other examples come from Medieval contexts, at T…
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-66F5B6

Record ID: FAKL-66F5B6
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Published Find published
Rim fragment from a cast copper alloy vessel of Medieval to Post Medieval date (1300-1700), Everted, eliptical, rim, expanded to 4.5mm thick from general 3.3mm section. Length 48.8mm, Width 21.6mm, Mass 15.60g.
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-66C930

Record ID: FAKL-66C930
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Published Find published
Rim fragment from a cast copper alloy vessel of Medieval to Post Medieval date (1300-1700), Everted, eliptical, rim, expanded to 4.2mm thick from general 3.4mm section. Length 39.6mm, Width 32.9mm, Mass 18.37g.
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of FAKL-668733

Record ID: FAKL-668733
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Published Find published
Cast copper alloy fitting, hollow, D sectioned with a 2.0mm wide x 0.9mm deep, square sectioned, transverse rib around its wider end. Both ends are now open but the opening on the flatter end may be a result of damage. The date and function of this object are unknown. It section, at 2.1mm at the open end and 1,0mm at the open end is too thin for it to be a Bronze Age gouge and a later date seems likely. Length 46.5mm, Width 27.6mm, Thickness 14.5mm, Mass 35.86g (including earth fill).
Created on: Monday 10th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-64B7BA

Record ID: PUBLIC-64B7BA
Object type: COIN
Broad period: POST MEDIEVAL
County: Telford and Wrekin
Workflow stage: Published Find published
A post medieval silver half groat of Charles I (1625-49), fourth bust (North 2257; Spink 2832), mint: London (Tower under Charles I), initial mark: Anchor (1628-9). Ref: North 1991: 162; Spink 2016: 295. Obverse: crowned bust left, II behind, CAROLVS D G M B F ET H:REX, Reverse: royal coat of arms on rounder shield. IVSTITIA THRONVM FIRMAT note: the Spink number given relates to the publication from 2016. Previous to 2016 the catalogue numbers for this type was 2817-8.
Created on: Monday 10th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded. This findspot is known as 'Rodington', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 235,754
Search server index: asgard

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 395,907
  • Mean quantity: 1.679
  • Maximum: 22,000

Filter your search

1 - 40 of 235,754 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.