Record ID: LEIC-F39C74
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy belt mount, 1200-1400 Length: 42 mm, width: 10 mm, thickness: 3 mm, weight: 4.58 g. The mount is complete and is rectangular in form with a slightly rounded upper surface and flat base. It consists of a plain rectangular shaft with raised collars at each end, sitting below a rounded terminal with a small sub rectangular projection and a central circular fixing hole.
Created on: Wednesday 16th January 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.

Record ID: LEIC-B6D54E
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Post medieval copper alloy mount, Length: 47 mm, width: 29 mm, thickness: 18 mm, weight: 26.48 g. The object is sub rectangular in form and cross section and has patches of tinning. It consists of a triangular shaped base which has a rectangular recess on its underside which is flanked by three small rounded 'feet. Above this the object has a short sub rectangular shaft upon which sits a circular loop, 18mm in diameter, with a rectangular cross section. Above the loop is a small rounded shaft which widens out to form a flat circular terminal , 12mm in diameter, with a slight step a…
Created on: Wednesday 26th September 2018
Last updated: Friday 2nd November 2018
Spatial data recorded.

Record ID: LEIC-B5BC0E
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Post medieval copper alloy boss, Width: 11 mm, thickness: 1 mm, diameter: 50 mm, weight: 10.81 g. The object is circular in form and semi-circular in cross section. It has a flat outer border c.15mm wide which is now damaged and bent. It has a double incised line as an outer border, 1mm in from the edge and in its centre is a hollow dome 10mm high. The object is decorated with three flower like circular attachments. Each one has a central semi-shperical projection surrounded by six more in a circle set in a scalloped border. These are positioned by rivets, in the centre of the dome…
Created on: Wednesday 26th September 2018
Last updated: Friday 12th October 2018
Spatial data recorded.

Record ID: LEIC-B550F3
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Early Medieval? copper alloy mount, Length: 52 mm, width: 14 mm, thickness: 11 mm, weight: 23.9 g. The object is sub rectangular in form and cross section and is incomplete. It has a central rounded swelling which has a semi-spherical cross section. To each side of this are incomplete rectangular shaped projections with D shaped cross sections. To the right (as photographed) this section sits behind a recessed collar and is thicker than the other side. It also points slightly downwards compared to the rest, which has a flat base and is straight. It is difficult to confirm what this…
Created on: Wednesday 26th September 2018
Last updated: Friday 12th October 2018
Spatial data recorded.

Record ID: LEIC-B53F52
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Three post medieval copper allloy belt mounts, found together and stilll attached to fragmentary leather, c. 1600-1700. 1) length: 47 mm, width: 12 mm, thickness: 4 mm, weight: 8.67 g 2) length: 28 mm, width: 11 mm, thickness: 3 mm, weight: 5.19 g 3) length: 48 mm, width: 13 mm, thickness: 3 mm, weight: 7.90 g. All are sub rectangular in form and cross section. Two (1 and 3) are of similar design, which consists of a central motif formed of two ovoid projections with two sub rectangular arms extending from it. These widen out and have tri-lobed terminals. mount 1 is sl…
Created on: Wednesday 26th September 2018
Last updated: Monday 8th October 2018
Spatial data recorded.

Record ID: LEIC-8F6FD6
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Post medieval copper alloy belt mount, Length: 23 mm, width: 12 mm, thickness: 6 mm, weight: 1.71 g. The mount is triangular in form and rectangular in cross section. It has a central openwork rectangle set with its corners pointing out to the sides. The other corners are flanked by two trefoil motifs at either end, one forming a pointed terminal. On its reverse it has two circular cross sectioned, bent attachment lugs, pointing towards each end.
Created on: Tuesday 19th June 2018
Last updated: Thursday 5th July 2018
Spatial data recorded.

Record ID: LEIC-FAA682
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Late Medieval or Post Medieval mount, Length: 40 mm, width: 33 mm, thickness: 2 mm, weight: 11.63 g. The mount is Scutiform with a rectangular cross section. It is decorated with a lion rampant. its reverse has a bent / turned prong in the centre.
Created on: Tuesday 12th June 2018
Last updated: Thursday 28th June 2018
Spatial data recorded. This findspot is known as 'Melton', grid reference and parish protected.

Record ID: LEIC-E87298
Object type: MOUNT
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Roman or Medieval? copper alloy object, Length: 23 mm, width: 8 mm, thickness: 4 mm, weight: 0.8 g. The object is incomplete and consists of an integral circular suspension loop sitting at the apex of a sub triangular plate. This curves slightly and it may be the top of an elongated medieval harness pendant or perhaps part of Roman toilet implement. The objects surface is very corroded and it is hard to place.
Created on: Wednesday 30th May 2018
Last updated: Monday 18th June 2018
Spatial data recorded.

Record ID: LEIC-E75A75
Object type: MOUNT
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
Roman copper alloy mount, length: 17 mm, width: 13 mm, thickness: 4 mm, weight: 1.47 g. The object is oval in form and sub rectangular in cross section. It has a raised lip running around its edge on both faces which are both on the same slightly angled alignment. One face has small patches of red enamel. The function of this object is unknown but several have been found at sites with a religious nature which may be significant. See LEIC-F0418E LEIC-F00557 LEIC-340BFE
Created on: Wednesday 30th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: LEIC-E74A4F
Object type: MOUNT
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
Roman copper alloy phallic mount, Length: 24 mm, width: 12 mm, thickness: 9 mm, weight: 4.94 g. The object is rectangular in form and sub rectangular in cross section, having a rounded upper surface. It has a slightly projecting rounded terminal in each lower corner (as shown) and its surface is divided into three parts by a raised straight line running across it one third up and curved one, two thirds up its length. It has a rounded upper edge which has a small crescentric shaped projection in its centre. The base of the object is flat and plain except for a centrally placed c…
Created on: Wednesday 30th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: LEIC-2A1A7A
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Late medieval to post medieval decorative mount? Length: 48 mm, width: 23 mm, thickness: 2 mm, weight: 7.35 g The object consists of a thick triangular shaped plate which appears incomplete. It has three semi-circular projections, one in a corner and one positioned in the centre of each present side. The object has a series of lines formed of stamped dots, running around its outer edge and running from the corner to the centre. From this line, another one on each side runs towards its edges, parallel with the current edge The objects underside appears roughly cast but has no obvi…
Created on: Monday 21st May 2018
Last updated: Thursday 8th July 2021
Spatial data recorded. This findspot is known as 'Oxfordshire', grid reference and parish protected.

Record ID: LEIC-29A0C6
Object type: MOUNT
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman copper alloy figurative object, possibly a handle? Length: 27 mm, width: 27 mm, thickness: 17 mm, weight: 31.11 g. The object consists of a female head which measures 20 mm by 17 mm, sitting on a substantial oval shaped base plate, 27 mm long and 12 mm wide, which has a rounded projection, centrally placed on its underside. The head is very wide when viewed from the side with a thick neck and angular hair. This is shown as plaited? around the face and has a rounded projection centre top, probably a bun? the rest of the hair appears pulled towards the centre of the back of …
Created on: Monday 21st May 2018
Last updated: Wednesday 4th July 2018
Spatial data recorded.

Record ID: LEIC-F2EFB1
Object type: MOUNT
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medieval or early post Medieval copper alloy belt mount. Length: 28 mm, width: 13 mm, thickness: 2 mm, weight: 3.31 g. The object is sub rectangular in form and rectangular in cross section. It has a rounded upper edge which then narrows down to a triangular 'waist' below this the object is 'kite' shaped with short sloping upper edges emerging from the waisted section. It has broken off at its tapering base. It has a slightly silvered surface and is decorated with a line of 'rocker work' running down its centre from the top. Its reverse has two rectangular cross sectioned curved pr…
Created on: Tuesday 24th April 2018
Last updated: Friday 27th April 2018
Spatial data recorded. This findspot is known as 'Rutland', grid reference and parish protected.

Record ID: LEIC-2C6082
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy casket mount, 1200-1500. This medieval anthropomorphic casket mount has a sub rectangular body formed of a curved plate. This has two circular holes, one above the other, in its centre. It is decorated with a series of raised lines, two on either side of the holes running vertically. In the centre are two faint raised chevrons, representing hands or a book. The front contains traces of enamel in blue, but is very worn. Above this is a solid sub spherical head with a slightly defined chin. Its only features are two small glass eyes. There is a trace of heavy gildi…
Created on: Tuesday 13th February 2018
Last updated: Tuesday 13th March 2018
Spatial data recorded.

Record ID: LEIC-DD278D
Object type: MOUNT
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
Roman copper alloy figurative mount, Length: 39 mm, width: 32 mm, thickness: 14 mm, weight: 22.67 grams. The object is complete and in the form of a male bust. It has a three dimensional head and neck which sits on a sub rectangular flat bust. The figure is a youthful, beardless man, with well defined face and hair. This is is arranged in distinct lozengeiform sections and he has two elongated triangular projections emerging from it, above his ears. These have decoration resembling feathers, central incised line with a series of diagonally positioned lines either side, so could rep…
Created on: Tuesday 16th January 2018
Last updated: Friday 19th January 2018
Spatial data recorded. This findspot is known as 'Knapwell', grid reference and parish protected.

Record ID: LEIC-D44F6D
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Post medieval copper alloy belt mount, 1500-1700. A copper alloy belt or strap mount of post-medieval date. The mount appears to be phallic in shape. One end is bilobate with a waisted middle and flaring triangular terminal at the other. The reverse holds two prongs, one near each short end. For similar examples see: SF-3BF4A6 LVPL-6B1DE8 HESH-796A17 Length: 20 mm, width: 11 mm, thickness: 2 mm, weight: 1.47 g.
Created on: Tuesday 28th November 2017
Last updated: Friday 1st December 2017
Spatial data recorded.

Record ID: LEIC-432F65
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Post medieval copper alloy mount, Length: 58 mm, width: 25 mm, thickness: 5 mm, weight: 14.4 grams. The mount is sub rectangular in form and rectangular in cross section. It has a plain a rectangular plate with slightly rounded surface in its centre and open triangular terminals which have a crescent shaped projection on each outer side. The reverse has four attachment prongs arranged in a row across the centre.
Created on: Tuesday 21st November 2017
Last updated: Thursday 23rd November 2017
Spatial data recorded. This findspot is known as 'Northamptonshire', grid reference and parish protected.

Record ID: LEIC-430FE0
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval or Post Medieval copper alloy fitting, Length: 52 mm, width: 10 mm, weight: 4.73 grams. The object consists of a sub rectangular shaped and rectangular cross sectioned bar which has rounded edges. Near each end it has a sub rectangular recess, with rounded inner edge, placed on opposing sides. In its centre is a rivet which is attached to an incomplete brownish coloured plate.
Created on: Tuesday 21st November 2017
Last updated: Thursday 23rd November 2017
Spatial data recorded. This findspot is known as 'Leicestershire', grid reference and parish protected.

Record ID: LEIC-386AF9
Object type: MOUNT
Broad period: MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
Medieval copper alloy mount. Length: 30 mm, width: 20 mm, thickness: 6 mm, weight: 16.89 grams. The object is rectangular in form and section and appears complete. Its base (as shown) is hollow and has a rounded collar at its edge. Above this the object has slightly outwards tapering edges and is largely solid. It has two rectangular holes, one above the collar creating a void above the hole in the base. The second larger one sits in the upper third of the object and is separated by a rectangular central section. This central area is decorated with an upper and lower border of a…
Created on: Thursday 21st September 2017
Last updated: Friday 29th September 2017
Spatial data recorded.

Record ID: LEIC-382B36
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval (?) copper alloy mount. Length: 50 mm, width: 10 mm, thickness: 5 mm, weight: 19.57 grams. The object is a slightly curved circular cross sectioned shaft, which tapers in width from 10mm to 5mm. It changes to a sub rectangular form at its wider end and appears to form a stylised animal head, with a corner forming a brow ridge and a circular recess forming an open mouth at its end. The other end is incomplete and it has no obvious decoration. Its reddish/green patina is consistent with early medieval and medieval material. It may be a functional item that just appers to be…
Created on: Thursday 21st September 2017
Last updated: Thursday 28th September 2017
Spatial data recorded.