Record ID: NCL-11D7B8
Object type: COIN
Broad period: MODERN
County: Northumberland
Workflow stage: Awaiting validation
A silver coin of George III dated 1816 5.31g 23.58 dia 1.23 thickness Axis12
Created on: Friday 20th July 2018
Last updated: Wednesday 20th April 2022
Spatial data recorded.

Record ID: NCL-5BD5BD
Object type: HOARD
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
The coins were submitted as 9 loose coins and two clumps of coins concreted together with corrosion products. These were separated in the British Museum Conservation laboratory. Associated with the coins were seven artefacts. These were found in one discrete group with the exception of the phallic pendant, found one to two metres to the south, and the lead object, found five metres to the south. They are likely to have been moved by ploughing Contents of find The coins (E. Ghey) The coins submitted for consideration consist of a group of 24 medium-sized copper alloy coins, pr…
Created on: Tuesday 17th October 2017
Last updated: Thursday 26th September 2019
Spatial data recorded. This findspot is known as 'Woodburn', grid reference and parish protected.

Record ID: NCL-AD9E11
Object type: HARNESS FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
Massive terret ring made from cast cu-alloy, with an incomplete projection of a twin spur (lipped projection) within the ring. It would also have had a strap bar concealed at the base. Most known examples come from northern England and Scotland with an emphasis in Aberdeenshire. There are also examples from North Wales. It's very close to an example from Chesters, Northumberland in Jope 2000, 309, 291e and MacGregor 1976, 113. Generally dating from late 1st-mid 3rd century AD. A fine example of this type of object is LANCUM-1F06E0
Created on: Friday 8th December 2017
Last updated: Tuesday 8th September 2020
Spatial data recorded.

Record ID: NCL-C9205B
Object type: POWDER FLASK
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A pressed copper-alloy sheet which is a component of an incomplete powder flask. The object probably equates to one half of a powder flask. The object is roughly pear shaped with a flat top at its narrowest point, and has a piercing at its narrow end. The date is probably ealry to late post medieval, however the lack of decoration makes this object problematic to date. The object is 71.38mm at its widest, 155.15 long, and 0.93mm thick.
Created on: Sunday 10th December 2017
Last updated: Tuesday 8th September 2020
Spatial data recorded.

Record ID: NCL-7DCD09
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A medieval cast lead-alloy spindle whorl. The weight is circular in plan, although chipped and abraded around the perimeter It is bi-conical in profile. The artefact is decorated by a single circle of pellets on each side, many of which have worn flat. Diameter 27.84mm; Diameter of central hole - 8.66mm; Thickness - 10.61mm; weight 32.57g
Created on: Saturday 30th December 2017
Last updated: Tuesday 18th December 2018
Spatial data recorded.

Record ID: NCL-7DF0DE
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
Scottish Bawbee
Created on: Saturday 30th December 2017
Last updated: Friday 14th December 2018
Spatial data recorded.

Record ID: NCL-AA48BB
Object type: WEIGHT
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A cast copper-alloy Post Medieval cup weight, 28.84mm in diameter and weighing 26.72g. It is not possible to see if there are any markings on the inside bottom of the cup due to corrosion and/or extant residue. There is an incised double-banded linear decoration running around approximately 2/3 of the way up the interior of the surface. the wall thickness is 2.24mm; while the diameter at the botton of the wall is 20.60.mm This cup weight may have formed part of a nested set similar to an example from Salisbury (Saunders 2001; 130, fig. 43, ref: 28b), dated from the 13th century. …
Created on: Tuesday 14th May 2019
Last updated: Thursday 16th December 2021
Spatial data recorded.

Record ID: NCL-B464CD
Object type: SAW
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
A possible fragment of a Roman (Bronze Age?) copper-alloy saw, similar to BM-AF446A.SF 688.The Piercebridge Divers The fragment is slightly concave and has a square piercing at one end. The object is 38.47mm long; 18.55mm wide; 1.04mm thick and weighs 3.05g
Created on: Wednesday 15th May 2019
Last updated: Sunday 4th August 2019
Spatial data recorded.

Record ID: NCL-B49FBD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A copper-alloy spectacle buckle, with pin. The frame has two oval loops which are convex in cross-section. one end has an incised notch which serves as a pin rest. The ends of each buckle are pointed. The strap bar has a triangular cross section. The frame features a knopps of each side of the projecting strap bar. The buckle frame is a patinated a light brown with some areas of lighter grey and grey green. The open looped pin is extant and complete. 24.60mm long, 15.24mm wide, 1.47mm thick. 2.41g in weight Such a simple buckle is hard to date precisely, Whitehead (2003) illustr…
Created on: Wednesday 15th May 2019
Last updated: Wednesday 15th May 2019
Spatial data recorded.

Record ID: NCL-B1CEAD
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
Complete copper-alloy belt and buckle style finger ring of post-medieval date (c. 1600 - 1800 AD). The ring is of simple design: a wide and flat band with a moulded bezel in the shape of a D-shaped buckle. The band has three dots, which presumably represent belt holes. the middle hole is not evenly spaced with the first and last dots. The inner face of the band is flat while the outer face is slightly convex, giving the finger ring a D-shaped section. There is no inscription. The finger ring has a rough brown surface with light green patches of copper-corrosion. It is 18.72 mm in diam…
Created on: Tuesday 14th May 2019
Last updated: Thursday 16th December 2021
Spatial data recorded.

Record ID: NCL-D4EBD5
Object type: WEIGHT
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A complete Viking cast lead-alloy trade weight dating from the early medieval period - the 9th or 10th century. The weight comprises a cut fragment of ornamental cast copper alloy metalwork (possibly gilt) set into a lead base. The item appears complete. It is of flat cubic shape with the ornamental copper alloy inset covering all of the upper surface. The decoration of the copper alloy piece is simple: a small square surrounded by four L-shapes with arms of equal length. The interior of the smaller geometrical shapes is scratched/roughened up, possibly to receive and hold enamel. …
Created on: Thursday 16th May 2019
Last updated: Thursday 16th May 2019
Spatial data recorded.

Record ID: NCL-271C9A
Object type: STUD
Broad period: IRON AGE
County: Northumberland
Workflow stage: Published
An incomplete cast copper-alloy cup-headed stud inlaid with green enamel. Sally Worrell has comented that such studs are late Iron Age or Early Roman, usually with either a blue or red enamel (see FAKL-FCD5C7). This example has a green enamel with no traces of blue or red. The head is cup-shaped and is roughly circular in plan. The diameter of the head is 14.44mm and the cup has a thickness of 5.57mm. On the under side of the cup is a truncated shank, 4.65mm diameter x 2.44mm long. Objects like this occur in Iron Age contexts with parallels from Dinorben, Abergele, Denb. (Savory 19…
Created on: Friday 9th March 2018
Last updated: Monday 25th February 2019
Spatial data recorded.

Record ID: NCL-B4F01A
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver siege coin struck at Newark dated to 1645 to 1646. It is a lozenge shape and weighs 5.13g; length 34.94mm; width 31.10mm. A post-medieval silver 'siege piece' struck at Newark. The coin is lozenge shaped. The obverse depicts a crown flanked from left to right by C and R. The crown has eight pellets on the left arch and nine on the right. Due to wear it is possible that some pellets cannot be seen. Below the crown are the numerals XII, which denotes the denomination as a shilling. All these are enclosed by an off-centred lozenge perimeter of pellets. The reverse has an …
Created on: Thursday 3rd May 2018
Last updated: Thursday 3rd May 2018
Spatial data recorded.

Record ID: NCL-09E1D4
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver short-cross penny of Henry II class 1b1: mint, London: moneyer RAVL. date AD 1180-1185. The weight is 1.26g, the diameter is 19.01mm and the thickness is 0.70mm. Obverse: hENRICVS REX, Crowned bust facing with sceptre. Reverse: + (cross pattée) RAVL·ON·LVND, Voided short cross with a quatrefoil in each quadrant N926; p220
Created on: Monday 7th May 2018
Last updated: Saturday 12th May 2018
Spatial data recorded.

Record ID: NCL-8884D3
Object type: BULLET
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A modern lead bullet. weight - 29.09g; Length - 24.34mm; Diameter - 14.95mm (0.588 inches). The bullet has 3 circumferential grooves, with rouletting and a hollowed base of depth c.3.9 mm. The diameter suggets this may be for the Martini Henry rifle, which equipped the British Army in the later 19th century, and at all events are for a rifle of military specification.
Created on: Sunday 13th May 2018
Last updated: Tuesday 15th May 2018
Spatial data recorded.

Record ID: NCL-536837
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
A near complete barbed and tanged flint arrowhead. The tip and part of one barb are missing. The flint is and mid brown with a mid-gloss patina. Both faces show covering low angle scaled and sub-parallel retouch. Dimensions: Length, 24.39mm; Width, 16.82mm Weight, 1.26g
Created on: Monday 4th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

• 

  Image not taken

Record ID: NCL-15A8DD
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
An incomplete copper alloy Roman or later furniture fitting (c. AD100-400). The object has a rounded top, with a circular cross-section, and has a spherical knop with central dimple on its apex. From the rounded top the object tapers in and out again to form a 'waist', with a step between the top and the 'waist'. There is a further step betwen the 'waist' and the foot of the fitting which is a flat, circular base. There is a circular protrusion for attachment on the underside of the base. The object may be a handle or knob. Simlar examples recorded on the PAS database can be seen in r…
Created on: Wednesday 13th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.

• 

  Image not taken

Record ID: NCL-0351DC
Object type: COIN HOARD
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A hoard of 50 silver pennies and 23 silver half-pennies. Short cross coinage (1180-1247) 2017 T541 Netherwitton, North Northumberland I have examined a group of 73 coins reported found at Netherwitton, North Northumberland. The majority (63) are English silver pennies of the Short Cross type, with the obverse inscription of HENRICUS REX, i.e. King Henry, and a reverse inscription naming the moneyer and mint-place. This coinage was issued in the years 1180-1247, and thus introduced by Henry II and continued through the reigns of Richard I, and John and several decades into the re…
Created on: Tuesday 13th June 2017
Last updated: Friday 10th May 2019
Spatial data recorded.

Record ID: NCL-74C5D5
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
A copper alloy flanged axehead of Early Middle Bronze Age date of later short-flanged axe of Type Ulcrome. The axehead dates to c. Acton Park II / Taunton phase of early MBA which corresponds to Needham typology date is c. 1600-1300 BC. The blade of the palstave is a splayed/crescent-shaped, with convex expanding sides, and a convex cutting edge, which is damaged. In profile the blade is sub-triangular with the widest section being at the stop ridge. The blade is 90.31mm in length. The width of the cutting edge measures 38.21mm. The thickness of the blade is 12.63mm The rear pa…
Created on: Thursday 13th July 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.

Record ID: NCL-30F496
Object type: BROOCH
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
A fragment of a copper-alloy Trumpet brooch of Roman date, c. AD 75 - 175. The head is ovate with a double lug hinge mechanism to the reverse. The pin no longer remains. A D-sectioned bow extends from the front of the head but is much truncateed. The patina is a dark green. Similar examples are illustrated in Hattatt, p.327, fig.186 and are dated to circa AD 75 - 175.
Created on: Thursday 2nd February 2017
Last updated: Tuesday 8th September 2020
Spatial data recorded.

Record ID: NCL-C799E1
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
Head of a copper alloy 8th- or 9th-century Anglo-Saxon disc-headed pin, probably part of a triple linked pin set. The head and part of the shaft survive in fairly good condition. The head is circular and flat with decoration on one face, and has two holes, one on each side at 90 degrees between the top of the circle and the drop of the shaft. If the shaft emerges at 6 o'clock, the hole at 9 o'clock is now incomplete. Surviving width 26mm, surviving length 39mm. The object dates to c.AD 700-900. The decoration consists of a cross with narrow arms, defined by an incised line at each…
Created on: Thursday 9th February 2017
Last updated: Tuesday 25th September 2018
Spatial data recorded.

Record ID: NCL-459509
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A post-Medieval Scottish silver twenty pence piece of Charles I (1625-1649). Obverse: CAR·D G·SCOT·ANG·FR·ET·HIB·R·; Crowned bust left, XX (mark of value) behind Reverse: IVSTITIA·THRONVM·FIRMAT·; Crowned thistle. Mint uncertain. Clipped, probably third issue 1637 - 1642; Diameter, 15.54mm; Thickness, 0.33mm; weight 0.4g.
Created on: Tuesday 22nd November 2016
Last updated: Tuesday 22nd November 2016
Spatial data recorded.

Record ID: NCL-55E407
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A complete silver groat of Henry VIII (1509 - 1547). London mint,1526 - 1544. Second coinage 1529 -1544. Lis(1) (1529 - 1532) initial mark Mint of London. Thickness: 0.81mm Weight: 2.8g Diameter: 24.58mm North Vol 2, p. 111, no. 1797.
Created on: Wednesday 23rd November 2016
Last updated: Saturday 31st December 2016
Spatial data recorded.

Record ID: NCL-11DB8B
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published
An incomplete copper-alloy Roman radiate of unclear type, possibly of Claudius II or similar, dating to the period c.AD 260-275 (Reece period 13) Obverse: IMP C[…], Radiate and cuirassed(?) bust right Reverse: […]RCI, Unclear standing figure left, probably Fides? Prototype of the mint of Rome.
Created on: Tuesday 3rd May 2022
Last updated: Wednesday 4th May 2022
Spatial data recorded.

Record ID: NCL-4ACEC6
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published
A copper-alloy nummus of Constans (AD 333-350), dating to the period c.AD 337-340 (Reece period17). GLOR-IA EXERC-ITVS reverse type depicting Two soldiers standing either side of one standard. Mint of Cyzicus. As RIC VIII, p. 491, no. 22. Weight - 1.58g; Diameter - 14.96mm Axis; 6 O'Clock
Created on: Wednesday 3rd April 2019
Last updated: Friday 5th April 2019
Spatial data recorded.

Record ID: NCL-1E0278
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published
A worn copper-alloy Roman dupondius of Hadrian (AD 117-138), dating to the period c.AD 128-129 (Reece period 6). Unclear reverse type depicting a standing female figure left, possibly Hilaritas? Mint of Rome. cf. RIC II.3, p. 142, cf no. 990 for a possible parallel.
Created on: Wednesday 26th January 2022
Last updated: Thursday 27th January 2022
Spatial data recorded.

Record ID: NCL-FE85ED
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A complete gold quarter noble of Henry V (1413-1422) type F, annulets next to shield with a trefoil to the L and a mullet to the R, date is 1413-20 North (1991) no.1383. Lis above shield and in centre of reverse. Mullet after first word, and annulet after second word. Struck 1413-22.
Created on: Tuesday 25th January 2022
Last updated: Wednesday 26th January 2022
Spatial data recorded.

Record ID: NCL-F12C3E
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
An incomplete copper alloy (bronze) probable socketed axehead or chisel fragment, of Late Bronze Age dating (c. 950 BC to c. 750 BC). The expanded blade has a curved convex (crescent shaped) cutting edge which is incomplete. The sides do not appear to be faceted and no ribs are present on either the front or back of the axehead fragment. The blade shows signs of wear to the edge, suggesting that this miniature axehead was a tool and not a small votive offering. The patina is a light brownish green, with an uneven slightly pitted surface.  The object is sub-rectang…
Created on: Monday 12th September 2022
Last updated: Monday 17th October 2022
Spatial data recorded.

Record ID: NCL-AD2D6E
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A complete silver Penny of Edward II (AD 1307-1327). Class 10cf5b. Long cross reverse with three pellets in each quadrant. Canterbury mint. AD 1309-1310. Diameter 17.96; Thickness, 0.64mm; Weight, 1.45g North, Vol II, P 32, No 1043/2
Created on: Wednesday 21st September 2022
Last updated: Monday 17th October 2022
Spatial data recorded.

Record ID: NCL-AD2BFE
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A Medieval Penny of Edward II (1307 - 1327), dating to AD 1319 - 1321. Class 15b, Canterbury mint. It has been clipped,  North (1991) Volume 2, no 1067 Diameter: 16.3 mm Weight: 0.87 g Die Axis: 5 Diameter 18.44; Thickness, 0.56mm; Weight, 1.27g. Die Axis 5 o'clock
Created on: Wednesday 21st September 2022
Last updated: Tuesday 18th October 2022
Spatial data recorded.

Record ID: NCL-C69B4F
Object type: TOILET ARTICLE
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
A possible Roman copper alloy toilet article. It is flat at one end, with a square section in the middle becoming round. There is a short section of thin wire, with a diameter of 0.85mm terminating in a rounded point. It is unclear if the thin wire section is due to wear and/or damage, or is purposefully constructed.  Weight: 5.05g Length: 77.93mm Thickness: 4.10mm
Created on: Wednesday 29th June 2022
Last updated: Tuesday 18th October 2022
Spatial data recorded.

Record ID: NCL-CFFDE2
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A fragment of copper alloy small long brooch (c. 450-550AD) 
Created on: Thursday 12th May 2022
Last updated: Monday 17th October 2022
Spatial data recorded.

Record ID: NCL-C1FDBB
Object type: HOARD
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
10 items of jewellery from the same brooch chain 1 miscellaneous object 29 coins from MM (one share with) PS 1 coin CW 1 coin ST 2 coins JM 1 coin PS + 1 share with MM 4 coins TS The age and precious metal content of this item qualify it as treasure under the stipulations of the 1996 Treasure Act 2 nails? no claim
Created on: Wednesday 15th May 2019
Last updated: Thursday 4th August 2022
Spatial data recorded. This findspot is known as 'Bellingham Hoard', grid reference and parish protected.

Record ID: NCL-98CFFC
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published
A silver Roman denarius of Vespasian (AD 69-79), dating to the period c.AD 75 (Reece period 4). PON MAX TR P COS VI reverse type depicting Pax, naked to waist, seated left, holding branch and sceptre. Mint of Rome. RIC II.1, p. 114, no. 772.
Created on: Tuesday 20th September 2022
Last updated: Tuesday 20th September 2022
Spatial data recorded.

Record ID: NCL-7CD83E
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A complete cast copper alloy finger ring, of probable Early Post Medieval dating (16th to 17th Centuries AD). The finger ring is of the signet ring style, with a raised rectangular bezel. The shoulders are plain and do not expand from the width of the hoop. The hoop is plain and D shaped in cross section and oval in plan. The device on the bezel has an elongated octagonal border which contains a trefoiled flower with two - possibly four - leaves. No direct comparison has been found. The finger ring measures 26.44 in diameter; 18.47mm wide from the bezel to the back edge of the hoop…
Created on: Friday 5th April 2019
Last updated: Saturday 6th April 2019
Spatial data recorded.

Record ID: NCL-DCD451
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A post-medieval silver filigree button. The top and bottom of the button are each formed of a dome of open filigree. The top dome of the button has a large, central granule, attached to a tubular coil of filigree by solder. This is contained within another circle of filigree coils, divided into eight short lengths (each composed of five twists of silver wire, originally formed round a circular core). The outer circle comprises nine medium-sized spherical granules, each with a coil of wire soldered around its widest part. The base of the button comprises eight pinched oval panels of op…
Created on: Wednesday 10th April 2019
Last updated: Thursday 22nd July 2021
Spatial data recorded. This findspot is known as 'Bellingham area', grid reference and parish protected.

Record ID: NCL-E01F76
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
A silver Roman coin
Created on: Wednesday 10th April 2019
Last updated: Wednesday 10th April 2019
Spatial data recorded.

Record ID: NCL-0E909A
Object type: GAMING PIECE
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
A lead gaming piece, counter or weight of uncertain date. The piece is has an incised cross contained within a circle. The motif is simple and crudely executed. The piece is circular in plan, and D-shaped in section.  Diameter, 29.21mm; Thickness, 5.08mm; weight 22.67g
Created on: Wednesday 25th January 2023
Last updated: Wednesday 25th January 2023
Spatial data recorded.

Record ID: NCL-466056
Object type: STEELYARD WEIGHT
Broad period: UNKNOWN
County: Northumberland
Workflow stage: Awaiting validation
An incomplete cast lead-alloy steelyard weight dating to the Roman period (AD 43-410). The weight is roughly bi-conical in form consisting of two unequally sized upper and lower hemispheres with a rounded circumferential ridge between them. A copper alloy band of 4mm width surrounds the circumference. The bottom section is smaller, and the base has been flattened either during production or at a later date. There is a nipple at the top of the weight which has a copper alloy attachment protruding from it. This is probably a flattened suspension loop. Height: 50.68 Diameter: …
Created on: Monday 10th October 2022
Last updated: Wednesday 4th January 2023
Spatial data recorded.

Record ID: NCL-978235
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A post medieval gold finger ring with four faceted stones that may - or may not - be emeralds. A fifth socket, which presumably held a further stone, is empty. The four remaing stones are held by a claw style of mount. The ring has no inscription or maker's mark. The scroll-work of the bevel and shoulders, the faceting of the stones, and the claw mounts suggests a late Georgian or early Victorian date of manufature. While this find was reported as possible treasure, the decision of the relevant curator at the British Museum was that this is not treasure, due to the style of the rin…
Created on: Monday 27th March 2017
Last updated: Tuesday 28th March 2017
Spatial data recorded.