Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): PAS582086E300154E
    • Sort: institution
    • Show this many records per page: 40

  • Thumbnail image of NCL-AD9E11

Record ID: NCL-AD9E11
Object type: HARNESS FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
Massive terret ring made from cast cu-alloy, with an incomplete projection of a twin spur (lipped projection) within the ring. It would also have had a strap bar concealed at the base. Most known examples come from northern England and Scotland with an emphasis in Aberdeenshire. There are also examples from North Wales. It's very close to an example from Chesters, Northumberland in Jope 2000, 309, 291e and MacGregor 1976, 113. Generally dating from late 1st-mid 3rd century AD. A fine example of this type of object is LANCUM-1F06E0
Created on: Friday 8th December 2017
Last updated: Friday 8th December 2017
Spatial data recorded.


  • Thumbnail image of NCL-C9205B

Record ID: NCL-C9205B
Object type: POWDER FLASK
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A pressed copper-alloy sheet which is a component of an incomplete powder flask. The object probably equates to one half of a powder flask. The object is roughly pear shaped with a flat top at its narrowest point, and has a piercing at its narrow end. The date is probably ealry to late post medieval, however the lack of decoration makes this object problematic to date. The object is 71.38mm at its widest, 155.15 long, and 0.93mm thick.
Created on: Sunday 10th December 2017
Last updated: Sunday 10th December 2017
Spatial data recorded.


  • Thumbnail image of NCL-74C5D5

Record ID: NCL-74C5D5
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy flanged axehead of Early Middle Bronze Age date of later short-flanged axe of Type Ulcrome. The axehead dates to c. Acton Park II / Taunton phase of early MBA which corresponds to Needham typology date is c. 1600-1300 BC. The blade of the palstave is a splayed/crescent-shaped, with convex expanding sides, and a convex cutting edge, which is damaged. In profile the blade is sub-triangular with the widest section being at the stop ridge. The blade is 90.31mm in length. The width of the cutting edge measures 38.21mm. The thickness of the blade is 12.63mm The rear pa…
Created on: Thursday 13th July 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of NCL-B4F01A

Record ID: NCL-B4F01A
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A silver siege coin struck at Newark dated to 1645 to 1646. It is a lozenge shape and weighs 5.13g; length 34.94mm; width 31.10mm. A post-medieval silver 'siege piece' struck at Newark. The coin is lozenge shaped. The obverse depicts a crown flanked from left to right by C and R. The crown has eight pellets on the left arch and nine on the right. Due to wear it is possible that some pellets cannot be seen. Below the crown are the numerals XII, which denotes the denomination as a shilling. All these are enclosed by an off-centred lozenge perimeter of pellets. The reverse has an inscr…
Created on: Thursday 3rd May 2018
Last updated: Thursday 3rd May 2018
Spatial data recorded.


  • Thumbnail image of NCL-09E1D4

Record ID: NCL-09E1D4
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A silver short-cross penny of Henry II class 1b1: mint, London: moneyer RAVL. date AD 1180-1185. The weight is 1.26g, the diameter is 19.01mm and the thickness is 0.70mm. Obverse: hENRICVS REX, Crowned bust facing with sceptre. Reverse: + (cross pattée) RAVL·ON·LVND, Voided short cross with a quatrefoil in each quadrant N926; p220
Created on: Monday 7th May 2018
Last updated: Saturday 12th May 2018
Spatial data recorded.


  • Thumbnail image of NCL-8884D3

Record ID: NCL-8884D3
Object type: BULLET
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A modern lead bullet. weight - 29.09g; Length - 24.34mm; Diameter - 14.95mm (0.588 inches). The bullet has 3 circumferential grooves, with rouletting and a hollowed base of depth c.3.9 mm. The diameter suggets this may be for the Martini Henry rifle, which equipped the British Army in the later 19th century, and at all events are for a rifle of military specification.
Created on: Sunday 13th May 2018
Last updated: Tuesday 15th May 2018
Spatial data recorded.


  • Thumbnail image of NCL-2696E2

Record ID: NCL-2696E2
Object type: SHEET
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A lead sheet with the impression of a Roman coin. The coin impresion is of a Siliqua from the reign of Gratian (367-383) - Reece Period 19. The lead sheet is sub-rectaungular in plan and weighs 70.50g; is 56.23mm long; and has a maximum width of 34.07mm and a minimum width of 26.22mm. It is 4.91mm thick. The impression is situated at the widest part of the sheet and some dammage has occured to the upper right quadrant of the object, which includes part of the impression. The sheet has a transverse cut just below the coin impression. It is conceivable that this was made for casting rep…
Created on: Friday 9th March 2018
Last updated: Tuesday 5th June 2018
Spatial data recorded.


  • Thumbnail image of NCL-0BAD90

Record ID: NCL-0BAD90
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy book clasp of the post medieval period (c.1500-1700). The clasp it sub-rectangular in plan and is formed from a single metal sheet that is 0.68 mm thick. The There is a pierced hole at one end that has a diameter of 2.86mm. An arc of incised decoration can be seen around the piercing. Looking along the object from the piercing there are twin concentric circles of decoration, then four laterally incised lines; a further decoration of twin concentric circles is partially visible before the integral backwards facing hook (i.e. backwards to the decoration) can b…
Created on: Tuesday 31st January 2017
Last updated: Thursday 14th December 2017
Spatial data recorded.


  • Thumbnail image of NCL-30F496

Record ID: NCL-30F496
Object type: BROOCH
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy Trumpet brooch of Roman date, c. AD 75 - 175. The head is ovate with a double lug hinge mechanism to the reverse. The pin no longer remains. A D-sectioned bow extends from the front of the head but is much truncateed. The patina is a dark green. Similar examples are illustrated in Hattatt, p.327, fig.186 and are dated to circa AD 75 - 175.
Created on: Thursday 2nd February 2017
Last updated: Friday 8th December 2017
Spatial data recorded.


  • Thumbnail image of NCL-459509

Record ID: NCL-459509
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A post-Medieval Scottish silver twenty pence piece of Charles I (1625-1649). Obverse: CAR·D G·SCOT·ANG·FR·ET·HIB·R·; Crowned bust left, XX (mark of value) behind Reverse: IVSTITIA·THRONVM·FIRMAT·; Crowned thistle. Mint uncertain. Clipped, probably third issue 1637 - 1642; Diameter, 15.54mm; Thickness, 0.33mm; weight 0.4g.
Created on: Tuesday 22nd November 2016
Last updated: Tuesday 22nd November 2016
Spatial data recorded.


  • Thumbnail image of NCL-55E407

Record ID: NCL-55E407
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A complete silver groat of Henry VIII (1509 - 1547). London mint,1526 - 1544. Second coinage 1529 -1544. Lis(1) (1529 - 1532) initial mark Mint of London. Thickness: 0.81mm Weight: 2.8g Diameter: 24.58mm North Vol 2, p. 111, no. 1797.
Created on: Wednesday 23rd November 2016
Last updated: Saturday 31st December 2016
Spatial data recorded.


  • Thumbnail image of NCL-27B1CE

Record ID: NCL-27B1CE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy frame from a single-loop buckle of medieval date. For similar zoomorphic buckles, see PAS record no. BH-44C3D6, or Murawski 2003: 455, M12-0206; 456, M12-0207; 462, M12-0406. The suggested date range is 12th to 13th century. The frame takes the form of a three-dimensional animal, standing, its head at the top right hand corner of the frame, looking backwards over its shoulder. The bar is missing, however the there are clear signs of a break at animals feet where the bar once would have been. There are two grooves under the animal's legs that deliniate the feet. The …
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 1st November 2017
Spatial data recorded.


  • Thumbnail image of NCL-978235

Record ID: NCL-978235
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A post medieval gold finger ring with four faceted stones that may - or may not - be emeralds. A fifth socket, which presumably held a further stone, is empty. The four remaing stones are held by a claw style of mount. The ring has no inscription or maker's mark. The scroll-work of the bevel and shoulders, the faceting of the stones, and the claw mounts suggests a late Georgian or early Victorian date of manufature. While this find was reported as possible treasure, the decision of the relevant curator at the British Museum was that this is not treasure, due to the style of the rin…
Created on: Monday 27th March 2017
Last updated: Tuesday 28th March 2017
Spatial data recorded.


  • Thumbnail image of NCL-7DF0DE

Record ID: NCL-7DF0DE
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
Scottish Bawbee
Created on: Saturday 30th December 2017
Last updated: Friday 14th December 2018
Spatial data recorded.


  • Thumbnail image of NCL-7DCD09

Record ID: NCL-7DCD09
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A medieval cast lead-alloy spindle whorl. The weight is circular in plan, although chipped and abraded around the perimeter It is bi-conical in profile. The artefact is decorated by a single circle of pellets on each side, many of which have worn flat. Diameter 27.84mm; Diameter of central hole - 8.66mm; Thickness - 10.61mm; weight 32.57g
Created on: Saturday 30th December 2017
Last updated: Tuesday 18th December 2018
Spatial data recorded.


  • Thumbnail image of NCL-5BD5BD

Record ID: NCL-5BD5BD
Object type: HOARD
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
The coins were submitted as 9 loose coins and two clumps of coins concreted together with corrosion products. These were separated in the British Museum Conservation laboratory. Associated with the coins were seven artefacts. These were found in one discrete group with the exception of the phallic pendant, found one to two metres to the south, and the lead object, found five metres to the south. They are likely to have been moved by ploughing Contents of find The coins (E. Ghey) The coins submitted for consideration consist of a group of 24 medium-sized copper alloy coins, probably …
Created on: Tuesday 17th October 2017
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'Woodburn', grid reference and parish protected.


  • Thumbnail image of NCL-D44613

Record ID: NCL-D44613
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
A silver Roman denarius of Vitellius (AD 69), dating to the period AD 69 (Reece period 4). XV VIR-SACR FAC reverse type depicting a Tripod-lebes with dolphin lying right on top, raven standing right below. Mint of Rome. As RIC I (2nd ed.), p. 272, no. 86.
Created on: Wednesday 10th October 2018
Last updated: Thursday 17th January 2019
Spatial data recorded.


  • Thumbnail image of NCL-C799E1

Record ID: NCL-C799E1
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
Head of a copper alloy 8th- or 9th-century Anglo-Saxon disc-headed pin, probably part of a triple linked pin set. The head and part of the shaft survive in fairly good condition. The head is circular and flat with decoration on one face, and has two holes, one on each side at 90 degrees between the top of the circle and the drop of the shaft. If the shaft emerges at 6 o'clock, the hole at 9 o'clock is now incomplete. Surviving width 26mm, surviving length 39mm. The object dates to c.AD 700-900. The decoration consists of a cross with narrow arms, defined by an incised line at each ed…
Created on: Thursday 9th February 2017
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NCL-15A8DD
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman or later furniture fitting (c. AD100-400). The object has a rounded top, with a circular cross-section, and has a spherical knop with central dimple on its apex. From the rounded top the object tapers in and out again to form a 'waist', with a step between the top and the 'waist'. There is a further step betwen the 'waist' and the foot of the fitting which is a flat, circular base. There is a circular protrusion for attachment on the underside of the base. The object may be a handle or knob. Simlar examples recorded on the PAS database can be seen in re…
Created on: Wednesday 13th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.


  • Thumbnail image of NCL-5E9B55

Record ID: NCL-5E9B55
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy medieval (1200-1400) harness pendant. The object is square in plan - 20.59mm x 20.89mm - with an integral elongated lug, which is 9.36mm long, protruding from the centre of the upper edge. The lug tip has a circular perforation which is perpendicular to the pendant. The perforation is blocked with iron corrosion. The outer edge of the object is scalloped creating a square field in the centre. Within this square field there is a depiction of a castle. This motif has two turrets, four windows and a door with a Romanesque arch. The windows and doors are decorated w…
Created on: Wednesday 12th July 2017
Last updated: Tuesday 12th June 2018
No spatial data available.


  • Thumbnail image of NCL-F46496

Record ID: NCL-F46496
Object type: COIN
Broad period: ROMAN
County: Sunderland
Workflow stage: Published Find published
A copper-alloy Roman sestertius of Vespasian (AD 69-79), dating to the period c.AD 77-78 (Reece period 4). [SALVS] AVGVSTA, S C reverse type depicting Salus seated left holding patera and sceptre. Mint of Lyon. As RIC II (2nd ed.), p. 146, no. 1208.
Created on: Wednesday 16th January 2019
Last updated: Thursday 7th February 2019
Spatial data recorded.


  • Thumbnail image of NCL-563B57

Record ID: NCL-563B57
Object type: COIN
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation Find awaiting validation
A complete silver short-cross penny of Richard I. There are 7 pearls to the crown and the letter N is wide, the beard is made up of small pellets. There are two un-pelleted curls on the L and two or three on the R. Based on this the coin belongs to Richard I; North class 3ab2 or class 4a. The busts on these coins can be either large, small, wide or thin. Date is c.1190-1200. Moneyer and mint are WILLELM of London, though WILLELM can also be spelt as WILLEM on these coins due to the space taken up by the enlarged letter N and A. The coin has a weight of 1.04g and a diameter of 17.74mm
Created on: Friday 11th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of NCL-536837

Record ID: NCL-536837
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A near complete barbed and tanged flint arrowhead. The tip and part of one barb are missing. The flint is and mid brown with a mid-gloss patina. Both faces show covering low angle scaled and sub-parallel retouch. Dimensions: Length, 24.39mm; Width, 16.82mm Weight, 1.26g
Created on: Monday 4th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of NCL-BABE07

Record ID: NCL-BABE07
Object type: FINGER RING
Broad period: ROMAN
County: County Durham
Workflow stage: Published Find published
The folowing report is from Martin Henig. "An attractive intaglio in a lower quality, base silver ring. The material of the stone is a non crystalline quartz, a chalcedony, with an upper blue layer and brownish ground, so it could be called a blue onyx or nicolo [ jewellery terms rather than scientific ones], the blue caused by staining/chemical treatment. The gem was cut with an outwardly bevelled edge. The subject is a cow, a popular subject from the Augustan period onwards, though I would date this to the late 1st century/first half of the 2nd century AD. Comparanda: see M.Henig, …
Created on: Thursday 21st December 2017
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of NCL-7D1AAB

Record ID: NCL-7D1AAB
Object type: COIN
Broad period: ROMAN
County: Cumbria
Workflow stage: Published Find published
A copper-alloy Roman nummus of Constantine I (AD 306-337), dating to the period AD 310-312 (Reece period 15). CONCO-R-D MILIT reverse type depicting Concordia standing left holding two standards. Mint of London. This is a variant of RIC VI, p. 136, no. 195. The type is published by Cloke and Toone (2015: pp. 176-177, no. 7.04.007), who note seven examples from just two obverse dies. Weight 3.04g; Diameter 22.95mm; Thickness 1.95mm;
Created on: Tuesday 11th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.


  • Thumbnail image of NCL-629FB3

Record ID: NCL-629FB3
Object type: RING
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval gold finger ring. . The outside of the ring ring is a plain gold band. On the inside is the inscription 'Joyn'd in one by God alone' with the two initials as the maker's mark. The ring has a diameter of 7.62mm; the band is 3.86mm wide and 1.80mm thick. The weight is 5.98g
Created on: Friday 30th June 2017
Last updated: Tuesday 26th March 2019
Spatial data recorded.


  • Thumbnail image of NCL-4ACEC6

Record ID: NCL-4ACEC6
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published Find published
A copper-alloy nummus of Constans (AD 333-350), dating to the period c.AD 337-340 (Reece period17). GLOR-IA EXERC-ITVS reverse type depicting Two soldiers standing either side of one standard. Mint of Cyzicus. As RIC VIII, p. 491, no. 22. Weight - 1.58g; Diameter - 14.96mm Axis; 6 O'Clock
Created on: Wednesday 3rd April 2019
Last updated: Friday 5th April 2019
Spatial data recorded.


  • Thumbnail image of NCL-7CD83E

Record ID: NCL-7CD83E
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy finger ring, of probable Early Post Medieval dating (16th to 17th Centuries AD). The finger ring is of the signet ring style, with a raised rectangular bezel. The shoulders are plain and do not expand from the width of the hoop. The hoop is plain and D shaped in cross section and oval in plan. The device on the bezel has an elongated octagonal border which contains a trefoiled flower with two - possibly four - leaves. No direct comparison has been found. The finger ring measures 26.44 in diameter; 18.47mm wide from the bezel to the back edge of the hoop. I…
Created on: Friday 5th April 2019
Last updated: Saturday 6th April 2019
Spatial data recorded.


  • Thumbnail image of NCL-E01F76

Record ID: NCL-E01F76
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A silver Roman coin
Created on: Wednesday 10th April 2019
Last updated: Wednesday 10th April 2019
Spatial data recorded.


  • Thumbnail image of NCL-CB39DC

Record ID: NCL-CB39DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy medieval buckle that conforms well to a Meols type 10 c.AD 1350 - 1400. The pin is missing, leaving just the frame. The buckle is a single looped, oval with a narrowed and offset bar and ornate outer edges. Two prominent knops flank two grooves on the outer edge of the loop which act as rests for the pin. The buckle weighs 4.15g; is 20.27mm deep and 26.09mm wide.
Created on: Friday 22nd June 2018
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of NCL-271C9A

Record ID: NCL-271C9A
Object type: STUD
Broad period: IRON AGE
County: Northumberland
Workflow stage: Published Find published
An incomplete cast copper-alloy cup-headed stud inlaid with green enamel. Sally Worrell has comented that such studs are late Iron Age or Early Roman, usually with either a blue or red enamel (see FAKL-FCD5C7). This example has a green enamel with no traces of blue or red. The head is cup-shaped and is roughly circular in plan. The diameter of the head is 14.44mm and the cup has a thickness of 5.57mm. On the under side of the cup is a truncated shank, 4.65mm diameter x 2.44mm long. Objects like this occur in Iron Age contexts with parallels from Dinorben, Abergele, Denb. (Savory 1976,…
Created on: Friday 9th March 2018
Last updated: Monday 25th February 2019
Spatial data recorded.


  • Thumbnail image of NCL-B1CEAD

Record ID: NCL-B1CEAD
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
Complete copper-alloy belt and buckle style finger ring of post-medieval date (c. 1600 - 1800 AD). The ring is of simple design: a wide and flat band with a moulded bezel in the shape of a D-shaped buckle. The band has three dots, which presumably represent belt holes. the middle hole is not evenly spaced with the first and last dots. The inner face of the band is flat while the outer face is slightly convex, giving the finger ring a D-shaped section. There is no inscription. The finger ring has a rough brown surface with light green patches of copper-corrosion. It is 18.72 mm in diame…
Created on: Tuesday 14th May 2019
Last updated: Wednesday 15th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-AA48BB

Record ID: NCL-AA48BB
Object type: WEIGHT
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy Post Medieval cup weight, 28.84mm in diameter and weighing 26.72g. It is not possible to see if there are any markings on the inside bottom of the cup due to corrosion and/or extant residue. There is an incised double-banded linear decoration running around approximately 2/3 of the way up the interior of the surface. the wall thickness is 2.24mm; while the diameter at the botton of the wall is 20.60.mm This cup weight may have formed part of a nested set similar to an example from Salisbury (Saunders 2001; 130, fig. 43, ref: 28b), dated from the 13th century. Also …
Created on: Tuesday 14th May 2019
Last updated: Wednesday 15th May 2019
Spatial data recorded.


  • Image not taken

Record ID: NCL-0351DC
Object type: COIN HOARD
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A hoard of 50 silver pennies and 23 silver half-pennies. Short cross coinage (1180-1247) 2017 T541 Netherwitton, North Northumberland I have examined a group of 73 coins reported found at Netherwitton, North Northumberland. The majority (63) are English silver pennies of the Short Cross type, with the obverse inscription of HENRICUS REX, i.e. King Henry, and a reverse inscription naming the moneyer and mint-place. This coinage was issued in the years 1180-1247, and thus introduced by Henry II and continued through the reigns of Richard I, and John and several decades into the reign o…
Created on: Tuesday 13th June 2017
Last updated: Friday 10th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-B49FBD

Record ID: NCL-B49FBD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy spectacle buckle, with pin. The frame has two oval loops which are convex in cross-section. one end has an incised notch which serves as a pin rest. The ends of each buckle are pointed. The strap bar has a triangular cross section. The frame features a knopps of each side of the projecting strap bar. The buckle frame is a patinated a light brown with some areas of lighter grey and grey green. The open looped pin is extant and complete. 24.60mm long, 15.24mm wide, 1.47mm thick. 2.41g in weight Such a simple buckle is hard to date precisely, Whitehead (2003) illustrates …
Created on: Wednesday 15th May 2019
Last updated: Wednesday 15th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-D4EBD5

Record ID: NCL-D4EBD5
Object type: WEIGHT
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A complete Viking cast lead-alloy trade weight dating from the early medieval period - the 9th or 10th century. The weight comprises a cut fragment of ornamental cast copper alloy metalwork (possibly gilt) set into a lead base. The item appears complete. It is of flat cubic shape with the ornamental copper alloy inset covering all of the upper surface. The decoration of the copper alloy piece is simple: a small square surrounded by four L-shapes with arms of equal length. The interior of the smaller geometrical shapes is scratched/roughened up, possibly to receive and hold enamel. One…
Created on: Thursday 16th May 2019
Last updated: Thursday 16th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-CBB4CB

Record ID: NCL-CBB4CB
Object type: COIN HOARD
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Revesby, Lincolnshire A hoard of c. 70 Roman bronze coins. Initial identification suggests a deposition date after the mid-fourth century. The coins (Eleanor Ghey) A total of 67 coins and 2 unidentified metallic fragments were submitted for examination as potential Treasure. The assemblage is wide-ranging in date and as there was no container and no additional information on the distribution of the finds was provided, the group is assumed to contain a hoard of 55 nummi with a tpq of AD 327-8 alongside other stray coins from the area, including two first century copper alloy coins, f…
Created on: Wednesday 16th November 2016
Last updated: Monday 18th March 2019
Spatial data recorded.


  • Thumbnail image of NCL-B464CD

Record ID: NCL-B464CD
Object type: SAW
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A possible fragment of a Roman (Bronze Age?) copper-alloy saw, similar to BM-AF446A.SF 688.The Piercebridge Divers The fragment is slightly concave and has a square piercing at one end. The object is 38.47mm long; 18.55mm wide; 1.04mm thick and weighs 3.05g
Created on: Wednesday 15th May 2019
Last updated: Sunday 4th August 2019
Spatial data recorded.


1 - 38 of 38 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.