Record ID: NCL-09E1D4
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver short-cross penny of Henry II class 1b1: mint, London: moneyer RAVL. date AD 1180-1185. The weight is 1.26g, the diameter is 19.01mm and the thickness is 0.70mm. Obverse: hENRICVS REX, Crowned bust facing with sceptre. Reverse: + (cross pattée) RAVL·ON·LVND, Voided short cross with a quatrefoil in each quadrant N926; p220
Created on: Monday 7th May 2018
Last updated: Saturday 12th May 2018
Spatial data recorded.

Record ID: NCL-563B57
Object type: COIN
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation
A complete silver short-cross penny of Richard I. There are 7 pearls to the crown and the letter N is wide, the beard is made up of small pellets. There are two un-pelleted curls on the L and two or three on the R. Based on this the coin belongs to Richard I; North class 3ab2 or class 4a. The busts on these coins can be either large, small, wide or thin. Date is c.1190-1200. Moneyer and mint are WILLELM of London, though WILLELM can also be spelt as WILLEM on these coins due to the space taken up by the enlarged letter N and A. The coin has a weight of 1.04g and a diameter of 17.74mm
Created on: Friday 11th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: NCL-8884D3
Object type: BULLET
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A modern lead bullet. weight - 29.09g; Length - 24.34mm; Diameter - 14.95mm (0.588 inches). The bullet has 3 circumferential grooves, with rouletting and a hollowed base of depth c.3.9 mm. The diameter suggets this may be for the Martini Henry rifle, which equipped the British Army in the later 19th century, and at all events are for a rifle of military specification.
Created on: Sunday 13th May 2018
Last updated: Tuesday 15th May 2018
Spatial data recorded.

Record ID: NCL-CB39DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation
An incomplete copper-alloy medieval buckle that conforms well to a Meols type 10 c.AD 1350 - 1400. The pin is missing, leaving just the frame. The buckle is a single looped, oval with a narrowed and offset bar and ornate outer edges. Two prominent knops flank two grooves on the outer edge of the loop which act as rests for the pin. The buckle weighs 4.15g; is 20.27mm deep and 26.09mm wide.
Created on: Friday 22nd June 2018
Last updated: Thursday 14th February 2019
Spatial data recorded.

Record ID: NCL-536837
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
A near complete barbed and tanged flint arrowhead. The tip and part of one barb are missing. The flint is and mid brown with a mid-gloss patina. Both faces show covering low angle scaled and sub-parallel retouch. Dimensions: Length, 24.39mm; Width, 16.82mm Weight, 1.26g
Created on: Monday 4th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

• 

  Image not taken

Record ID: NCL-15A8DD
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
An incomplete copper alloy Roman or later furniture fitting (c. AD100-400). The object has a rounded top, with a circular cross-section, and has a spherical knop with central dimple on its apex. From the rounded top the object tapers in and out again to form a 'waist', with a step between the top and the 'waist'. There is a further step betwen the 'waist' and the foot of the fitting which is a flat, circular base. There is a circular protrusion for attachment on the underside of the base. The object may be a handle or knob. Simlar examples recorded on the PAS database can be seen in r…
Created on: Wednesday 13th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.

• 

  Image not taken

Record ID: NCL-0351DC
Object type: COIN HOARD
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A hoard of 50 silver pennies and 23 silver half-pennies. Short cross coinage (1180-1247) 2017 T541 Netherwitton, North Northumberland I have examined a group of 73 coins reported found at Netherwitton, North Northumberland. The majority (63) are English silver pennies of the Short Cross type, with the obverse inscription of HENRICUS REX, i.e. King Henry, and a reverse inscription naming the moneyer and mint-place. This coinage was issued in the years 1180-1247, and thus introduced by Henry II and continued through the reigns of Richard I, and John and several decades into the re…
Created on: Tuesday 13th June 2017
Last updated: Friday 10th May 2019
Spatial data recorded.

Record ID: NCL-5E9B55
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
Workflow stage: Awaiting validation
A complete copper-alloy medieval (1200-1400) harness pendant. The object is square in plan - 20.59mm x 20.89mm - with an integral elongated lug, which is 9.36mm long, protruding from the centre of the upper edge. The lug tip has a circular perforation which is perpendicular to the pendant. The perforation is blocked with iron corrosion. The outer edge of the object is scalloped creating a square field in the centre. Within this square field there is a depiction of a castle. This motif has two turrets, four windows and a door with a Romanesque arch. The windows and doors are decorated …
Created on: Wednesday 12th July 2017
Last updated: Tuesday 12th June 2018
No spatial data available.

Record ID: NCL-74C5D5
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
A copper alloy flanged axehead of Early Middle Bronze Age date of later short-flanged axe of Type Ulcrome. The axehead dates to c. Acton Park II / Taunton phase of early MBA which corresponds to Needham typology date is c. 1600-1300 BC. The blade of the palstave is a splayed/crescent-shaped, with convex expanding sides, and a convex cutting edge, which is damaged. In profile the blade is sub-triangular with the widest section being at the stop ridge. The blade is 90.31mm in length. The width of the cutting edge measures 38.21mm. The thickness of the blade is 12.63mm The rear pa…
Created on: Thursday 13th July 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.

Record ID: NCL-30F496
Object type: BROOCH
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
A fragment of a copper-alloy Trumpet brooch of Roman date, c. AD 75 - 175. The head is ovate with a double lug hinge mechanism to the reverse. The pin no longer remains. A D-sectioned bow extends from the front of the head but is much truncateed. The patina is a dark green. Similar examples are illustrated in Hattatt, p.327, fig.186 and are dated to circa AD 75 - 175.
Created on: Thursday 2nd February 2017
Last updated: Tuesday 8th September 2020
Spatial data recorded.

Record ID: NCL-C799E1
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
Head of a copper alloy 8th- or 9th-century Anglo-Saxon disc-headed pin, probably part of a triple linked pin set. The head and part of the shaft survive in fairly good condition. The head is circular and flat with decoration on one face, and has two holes, one on each side at 90 degrees between the top of the circle and the drop of the shaft. If the shaft emerges at 6 o'clock, the hole at 9 o'clock is now incomplete. Surviving width 26mm, surviving length 39mm. The object dates to c.AD 700-900. The decoration consists of a cross with narrow arms, defined by an incised line at each…
Created on: Thursday 9th February 2017
Last updated: Tuesday 25th September 2018
Spatial data recorded.

Record ID: NCL-CBB4CB
Object type: COIN HOARD
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Revesby, Lincolnshire A hoard of c. 70 Roman bronze coins. Initial identification suggests a deposition date after the mid-fourth century. The coins (Eleanor Ghey) A total of 67 coins and 2 unidentified metallic fragments were submitted for examination as potential Treasure. The assemblage is wide-ranging in date and as there was no container and no additional information on the distribution of the finds was provided, the group is assumed to contain a hoard of 55 nummi with a tpq of AD 327-8 alongside other stray coins from the area, including two first century copper a…
Created on: Wednesday 16th November 2016
Last updated: Thursday 17th February 2022
Spatial data recorded.

Record ID: NCL-459509
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A post-Medieval Scottish silver twenty pence piece of Charles I (1625-1649). Obverse: CAR·D G·SCOT·ANG·FR·ET·HIB·R·; Crowned bust left, XX (mark of value) behind Reverse: IVSTITIA·THRONVM·FIRMAT·; Crowned thistle. Mint uncertain. Clipped, probably third issue 1637 - 1642; Diameter, 15.54mm; Thickness, 0.33mm; weight 0.4g.
Created on: Tuesday 22nd November 2016
Last updated: Tuesday 22nd November 2016
Spatial data recorded.

Record ID: NCL-55E407
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A complete silver groat of Henry VIII (1509 - 1547). London mint,1526 - 1544. Second coinage 1529 -1544. Lis(1) (1529 - 1532) initial mark Mint of London. Thickness: 0.81mm Weight: 2.8g Diameter: 24.58mm North Vol 2, p. 111, no. 1797.
Created on: Wednesday 23rd November 2016
Last updated: Saturday 31st December 2016
Spatial data recorded.

Record ID: NCL-F46496
Object type: COIN
Broad period: ROMAN
County: Sunderland
Workflow stage: Published
A copper-alloy Roman sestertius of Vespasian (AD 69-79), dating to the period c.AD 77-78 (Reece period 4). [SALVS] AVGVSTA, S C reverse type depicting Salus seated left holding patera and sceptre. Mint of Lyon. As RIC II (2nd ed.), p. 146, no. 1208.
Created on: Wednesday 16th January 2019
Last updated: Thursday 7th February 2019
Spatial data recorded.

Record ID: NCL-80B583
Object type: HARNESS FITTING
Broad period: IRON AGE
County: County Durham
Workflow stage: Awaiting validation
Fragment of a copper alloy simple terret ring dating to the Late Iron Age/Early Roman period (AD 43 -150). The curved fragment has broadly circular section which expands in diameter from one end to the other from a diameter of 7.20mm to 10.11mm. At each end there is a circular collar-formed terminal. At the small diameter end the collar has a diameter of 8.45mm, while at the large diameter end the collar is 12.17mm. There is a single knop approximately a third of the way along the fragment, closets to the thickest diameter of the object. The object is 51.38mm Long and is sub-cir…
Created on: Tuesday 26th April 2022
Last updated: Tuesday 14th June 2022
Spatial data recorded.

Record ID: NCL-8FFF9E
Object type: HARNESS
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation
A copper alloy sub-rectangular object which is possibly an inlay from a post medieval harmess fitting. The object is decorated with 2 parallel inlaid wavy lines which run along the length of the object. The resulting raised areas appear as 2 parallel rows of dog tooth decoration along the two long edges, while the central raised areas appear as 5 diamond shaped areas. Dimentions; Weight 6.04g; Length 46.02mm; Width 11.14mm; thickness 2.16mm
Created on: Wednesday 27th April 2022
Last updated: Tuesday 31st May 2022
Spatial data recorded.

Record ID: NCL-11DB8B
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published
An incomplete copper-alloy Roman radiate of unclear type, possibly of Claudius II or similar, dating to the period c.AD 260-275 (Reece period 13) Obverse: IMP C[…], Radiate and cuirassed(?) bust right Reverse: […]RCI, Unclear standing figure left, probably Fides? Prototype of the mint of Rome.
Created on: Tuesday 3rd May 2022
Last updated: Wednesday 4th May 2022
Spatial data recorded.

Record ID: NCL-DF3553
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation
A complete, copper alloy, Later Short Flanged axehead of the Lisset Type, dating to the middle Bronze Age, BC 1300-1200. A probable type Lissett metalworking phase (Schmidt and Burgess, 1981,100; plate 48, numbers 616-620).The axe is subrectangular, with a square butt which has been damaged. There is differential wear on the axe blade indicating that the axe has been used. The septem, the area between the flanges, terminates in a faint shield like depression. The casting flashes or seams have been removed and hammered flat. There is an notable casting line on the profile of one side ,…
Created on: Wednesday 25th May 2022
Last updated: Thursday 23rd June 2022
Spatial data recorded.

Record ID: NCL-61D9B2
Object type: BOWL
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation
A medieval to post-medieval copper alloy bowl The bowl has a flange around the circumference with 4 subrectangular nail holes. 4 have corroded square headed iron nail in situ. It appears that the flange was attached with nails to surface with an iron ring above the flange. Part of the iron ring that sat above the flange remains but is heavily corroded, The bowl has an outside diameter of 210mm and an inside diameter of 180mm. the depth is 74.21mm. It weighs 407.06g
Created on: Tuesday 31st May 2022
Last updated: Saturday 18th June 2022
Spatial data recorded.