Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): PAS582086E300154E
    • Direction: asc
    • Sort: broadperiod

  • Thumbnail image of NCL-74C5D5

Record ID: NCL-74C5D5
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy flanged axehead of Early Middle Bronze Age date of later short-flanged axe of Type Ulcrome. The axehead dates to c. Acton Park II / Taunton phase of early MBA which corresponds to Needham typology date is c. 1600-1300 BC. The blade of the palstave is a splayed/crescent-shaped, with convex expanding sides, and a convex cutting edge, which is damaged. In profile the blade is sub-triangular with the widest section being at the stop ridge. The blade is 90.31mm in length. The width of the cutting edge measures 38.21mm. The thickness of the blade is 12.63mm The rear pa…
Created on: Thursday 13th July 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of NCL-536837

Record ID: NCL-536837
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A near complete barbed and tanged flint arrowhead. The tip and part of one barb are missing. The flint is and mid brown with a mid-gloss patina. Both faces show covering low angle scaled and sub-parallel retouch. Dimensions: Length, 24.39mm; Width, 16.82mm Weight, 1.26g
Created on: Monday 4th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of NCL-C799E1

Record ID: NCL-C799E1
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
Head of a copper alloy 8th- or 9th-century Anglo-Saxon disc-headed pin, probably part of a triple linked pin set. The head and part of the shaft survive in fairly good condition. The head is circular and flat with decoration on one face, and has two holes, one on each side at 90 degrees between the top of the circle and the drop of the shaft. If the shaft emerges at 6 o'clock, the hole at 9 o'clock is now incomplete. Surviving width 26mm, surviving length 39mm. The object dates to c.AD 700-900. The decoration consists of a cross with narrow arms, defined by an incised line at each ed…
Created on: Thursday 9th February 2017
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NCL-D4EBD5

Record ID: NCL-D4EBD5
Object type: WEIGHT
Broad period: EARLY MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A complete Viking cast lead-alloy trade weight dating from the early medieval period - the 9th or 10th century. The weight comprises a cut fragment of ornamental cast copper alloy metalwork (possibly gilt) set into a lead base. The item appears complete. It is of flat cubic shape with the ornamental copper alloy inset covering all of the upper surface. The decoration of the copper alloy piece is simple: a small square surrounded by four L-shapes with arms of equal length. The interior of the smaller geometrical shapes is scratched/roughened up, possibly to receive and hold enamel. One…
Created on: Thursday 16th May 2019
Last updated: Thursday 16th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-271C9A

Record ID: NCL-271C9A
Object type: STUD
Broad period: IRON AGE
County: Northumberland
Workflow stage: Published Find published
An incomplete cast copper-alloy cup-headed stud inlaid with green enamel. Sally Worrell has comented that such studs are late Iron Age or Early Roman, usually with either a blue or red enamel (see FAKL-FCD5C7). This example has a green enamel with no traces of blue or red. The head is cup-shaped and is roughly circular in plan. The diameter of the head is 14.44mm and the cup has a thickness of 5.57mm. On the under side of the cup is a truncated shank, 4.65mm diameter x 2.44mm long. Objects like this occur in Iron Age contexts with parallels from Dinorben, Abergele, Denb. (Savory 1976,…
Created on: Friday 9th March 2018
Last updated: Monday 25th February 2019
Spatial data recorded.


  • Thumbnail image of NCL-09E1D4

Record ID: NCL-09E1D4
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A silver short-cross penny of Henry II class 1b1: mint, London: moneyer RAVL. date AD 1180-1185. The weight is 1.26g, the diameter is 19.01mm and the thickness is 0.70mm. Obverse: hENRICVS REX, Crowned bust facing with sceptre. Reverse: + (cross pattée) RAVL·ON·LVND, Voided short cross with a quatrefoil in each quadrant N926; p220
Created on: Monday 7th May 2018
Last updated: Saturday 12th May 2018
Spatial data recorded.


  • Thumbnail image of NCL-27B1CE

Record ID: NCL-27B1CE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy frame from a single-loop buckle of medieval date. For similar zoomorphic buckles, see PAS record no. BH-44C3D6, or Murawski 2003: 455, M12-0206; 456, M12-0207; 462, M12-0406. The suggested date range is 12th to 13th century. The frame takes the form of a three-dimensional animal, standing, its head at the top right hand corner of the frame, looking backwards over its shoulder. The bar is missing, however the there are clear signs of a break at animals feet where the bar once would have been. There are two grooves under the animal's legs that deliniate the feet. The …
Created on: Wednesday 22nd March 2017
Last updated: Wednesday 1st November 2017
Spatial data recorded.


  • Thumbnail image of NCL-7DCD09

Record ID: NCL-7DCD09
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A medieval cast lead-alloy spindle whorl. The weight is circular in plan, although chipped and abraded around the perimeter It is bi-conical in profile. The artefact is decorated by a single circle of pellets on each side, many of which have worn flat. Diameter 27.84mm; Diameter of central hole - 8.66mm; Thickness - 10.61mm; weight 32.57g
Created on: Saturday 30th December 2017
Last updated: Tuesday 18th December 2018
Spatial data recorded.


  • Thumbnail image of NCL-5E9B55

Record ID: NCL-5E9B55
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy medieval (1200-1400) harness pendant. The object is square in plan - 20.59mm x 20.89mm - with an integral elongated lug, which is 9.36mm long, protruding from the centre of the upper edge. The lug tip has a circular perforation which is perpendicular to the pendant. The perforation is blocked with iron corrosion. The outer edge of the object is scalloped creating a square field in the centre. Within this square field there is a depiction of a castle. This motif has two turrets, four windows and a door with a Romanesque arch. The windows and doors are decorated w…
Created on: Wednesday 12th July 2017
Last updated: Tuesday 12th June 2018
No spatial data available.


  • Thumbnail image of NCL-563B57

Record ID: NCL-563B57
Object type: COIN
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation Find awaiting validation
A complete silver short-cross penny of Richard I. There are 7 pearls to the crown and the letter N is wide, the beard is made up of small pellets. There are two un-pelleted curls on the L and two or three on the R. Based on this the coin belongs to Richard I; North class 3ab2 or class 4a. The busts on these coins can be either large, small, wide or thin. Date is c.1190-1200. Moneyer and mint are WILLELM of London, though WILLELM can also be spelt as WILLEM on these coins due to the space taken up by the enlarged letter N and A. The coin has a weight of 1.04g and a diameter of 17.74mm
Created on: Friday 11th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of NCL-CB39DC

Record ID: NCL-CB39DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy medieval buckle that conforms well to a Meols type 10 c.AD 1350 - 1400. The pin is missing, leaving just the frame. The buckle is a single looped, oval with a narrowed and offset bar and ornate outer edges. Two prominent knops flank two grooves on the outer edge of the loop which act as rests for the pin. The buckle weighs 4.15g; is 20.27mm deep and 26.09mm wide.
Created on: Friday 22nd June 2018
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of NCL-AA48BB

Record ID: NCL-AA48BB
Object type: WEIGHT
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy Post Medieval cup weight, 28.84mm in diameter and weighing 26.72g. It is not possible to see if there are any markings on the inside bottom of the cup due to corrosion and/or extant residue. There is an incised double-banded linear decoration running around approximately 2/3 of the way up the interior of the surface. the wall thickness is 2.24mm; while the diameter at the botton of the wall is 20.60.mm This cup weight may have formed part of a nested set similar to an example from Salisbury (Saunders 2001; 130, fig. 43, ref: 28b), dated from the 13th century. Also …
Created on: Tuesday 14th May 2019
Last updated: Wednesday 15th May 2019
Spatial data recorded.


  • Image not taken

Record ID: NCL-0351DC
Object type: COIN HOARD
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A hoard of 50 silver pennies and 23 silver half-pennies. Short cross coinage (1180-1247) 2017 T541 Netherwitton, North Northumberland I have examined a group of 73 coins reported found at Netherwitton, North Northumberland. The majority (63) are English silver pennies of the Short Cross type, with the obverse inscription of HENRICUS REX, i.e. King Henry, and a reverse inscription naming the moneyer and mint-place. This coinage was issued in the years 1180-1247, and thus introduced by Henry II and continued through the reigns of Richard I, and John and several decades into the reign o…
Created on: Tuesday 13th June 2017
Last updated: Friday 10th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-B49FBD

Record ID: NCL-B49FBD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy spectacle buckle, with pin. The frame has two oval loops which are convex in cross-section. one end has an incised notch which serves as a pin rest. The ends of each buckle are pointed. The strap bar has a triangular cross section. The frame features a knopps of each side of the projecting strap bar. The buckle frame is a patinated a light brown with some areas of lighter grey and grey green. The open looped pin is extant and complete. 24.60mm long, 15.24mm wide, 1.47mm thick. 2.41g in weight Such a simple buckle is hard to date precisely, Whitehead (2003) illustrates …
Created on: Wednesday 15th May 2019
Last updated: Wednesday 15th May 2019
Spatial data recorded.


  • Thumbnail image of NCL-C9205B

Record ID: NCL-C9205B
Object type: POWDER FLASK
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A pressed copper-alloy sheet which is a component of an incomplete powder flask. The object probably equates to one half of a powder flask. The object is roughly pear shaped with a flat top at its narrowest point, and has a piercing at its narrow end. The date is probably ealry to late post medieval, however the lack of decoration makes this object problematic to date. The object is 71.38mm at its widest, 155.15 long, and 0.93mm thick.
Created on: Sunday 10th December 2017
Last updated: Sunday 10th December 2017
Spatial data recorded.


  • Thumbnail image of NCL-B4F01A

Record ID: NCL-B4F01A
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A silver siege coin struck at Newark dated to 1645 to 1646. It is a lozenge shape and weighs 5.13g; length 34.94mm; width 31.10mm. A post-medieval silver 'siege piece' struck at Newark. The coin is lozenge shaped. The obverse depicts a crown flanked from left to right by C and R. The crown has eight pellets on the left arch and nine on the right. Due to wear it is possible that some pellets cannot be seen. Below the crown are the numerals XII, which denotes the denomination as a shilling. All these are enclosed by an off-centred lozenge perimeter of pellets. The reverse has an inscr…
Created on: Thursday 3rd May 2018
Last updated: Thursday 3rd May 2018
Spatial data recorded.


  • Thumbnail image of NCL-8884D3

Record ID: NCL-8884D3
Object type: BULLET
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A modern lead bullet. weight - 29.09g; Length - 24.34mm; Diameter - 14.95mm (0.588 inches). The bullet has 3 circumferential grooves, with rouletting and a hollowed base of depth c.3.9 mm. The diameter suggets this may be for the Martini Henry rifle, which equipped the British Army in the later 19th century, and at all events are for a rifle of military specification.
Created on: Sunday 13th May 2018
Last updated: Tuesday 15th May 2018
Spatial data recorded.


  • Thumbnail image of NCL-0BAD90

Record ID: NCL-0BAD90
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy book clasp of the post medieval period (c.1500-1700). The clasp it sub-rectangular in plan and is formed from a single metal sheet that is 0.68 mm thick. The There is a pierced hole at one end that has a diameter of 2.86mm. An arc of incised decoration can be seen around the piercing. Looking along the object from the piercing there are twin concentric circles of decoration, then four laterally incised lines; a further decoration of twin concentric circles is partially visible before the integral backwards facing hook (i.e. backwards to the decoration) can b…
Created on: Tuesday 31st January 2017
Last updated: Thursday 14th December 2017
Spatial data recorded.


  • Thumbnail image of NCL-459509

Record ID: NCL-459509
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A post-Medieval Scottish silver twenty pence piece of Charles I (1625-1649). Obverse: CAR·D G·SCOT·ANG·FR·ET·HIB·R·; Crowned bust left, XX (mark of value) behind Reverse: IVSTITIA·THRONVM·FIRMAT·; Crowned thistle. Mint uncertain. Clipped, probably third issue 1637 - 1642; Diameter, 15.54mm; Thickness, 0.33mm; weight 0.4g.
Created on: Tuesday 22nd November 2016
Last updated: Tuesday 22nd November 2016
Spatial data recorded.


  • Thumbnail image of NCL-55E407

Record ID: NCL-55E407
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation Find awaiting validation
A complete silver groat of Henry VIII (1509 - 1547). London mint,1526 - 1544. Second coinage 1529 -1544. Lis(1) (1529 - 1532) initial mark Mint of London. Thickness: 0.81mm Weight: 2.8g Diameter: 24.58mm North Vol 2, p. 111, no. 1797.
Created on: Wednesday 23rd November 2016
Last updated: Saturday 31st December 2016
Spatial data recorded.


1 - 20 of 38 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.