Record ID: NCL-2696E2
Object type: SHEET
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A lead sheet with the impression of a Roman coin. The coin impresion is of a Siliqua from the reign of Gratian (367-383) - Reece Period 19. The lead sheet is sub-rectaungular in plan and weighs 70.50g; is 56.23mm long; and has a maximum width of 34.07mm and a minimum width of 26.22mm. It is 4.91mm thick. The impression is situated at the widest part of the sheet and some dammage has occured to the upper right quadrant of the object, which includes part of the impression. The sheet has a transverse cut just below the coin impression. It is conceivable that this was made for casting …
Created on: Friday 9th March 2018
Last updated: Tuesday 5th June 2018
Spatial data recorded.

Record ID: NCL-271C9A
Object type: STUD
Broad period: IRON AGE
County: Northumberland
Workflow stage: Published
An incomplete cast copper-alloy cup-headed stud inlaid with green enamel. Sally Worrell has comented that such studs are late Iron Age or Early Roman, usually with either a blue or red enamel (see FAKL-FCD5C7). This example has a green enamel with no traces of blue or red. The head is cup-shaped and is roughly circular in plan. The diameter of the head is 14.44mm and the cup has a thickness of 5.57mm. On the under side of the cup is a truncated shank, 4.65mm diameter x 2.44mm long. Objects like this occur in Iron Age contexts with parallels from Dinorben, Abergele, Denb. (Savory 19…
Created on: Friday 9th March 2018
Last updated: Monday 25th February 2019
Spatial data recorded.

Record ID: NCL-B4F01A
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver siege coin struck at Newark dated to 1645 to 1646. It is a lozenge shape and weighs 5.13g; length 34.94mm; width 31.10mm. A post-medieval silver 'siege piece' struck at Newark. The coin is lozenge shaped. The obverse depicts a crown flanked from left to right by C and R. The crown has eight pellets on the left arch and nine on the right. Due to wear it is possible that some pellets cannot be seen. Below the crown are the numerals XII, which denotes the denomination as a shilling. All these are enclosed by an off-centred lozenge perimeter of pellets. The reverse has an …
Created on: Thursday 3rd May 2018
Last updated: Thursday 3rd May 2018
Spatial data recorded.

Record ID: NCL-09E1D4
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver short-cross penny of Henry II class 1b1: mint, London: moneyer RAVL. date AD 1180-1185. The weight is 1.26g, the diameter is 19.01mm and the thickness is 0.70mm. Obverse: hENRICVS REX, Crowned bust facing with sceptre. Reverse: + (cross pattée) RAVL·ON·LVND, Voided short cross with a quatrefoil in each quadrant N926; p220
Created on: Monday 7th May 2018
Last updated: Saturday 12th May 2018
Spatial data recorded.

Record ID: NCL-563B57
Object type: COIN
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation
A complete silver short-cross penny of Richard I. There are 7 pearls to the crown and the letter N is wide, the beard is made up of small pellets. There are two un-pelleted curls on the L and two or three on the R. Based on this the coin belongs to Richard I; North class 3ab2 or class 4a. The busts on these coins can be either large, small, wide or thin. Date is c.1190-1200. Moneyer and mint are WILLELM of London, though WILLELM can also be spelt as WILLEM on these coins due to the space taken up by the enlarged letter N and A. The coin has a weight of 1.04g and a diameter of 17.74mm
Created on: Friday 11th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: NCL-8884D3
Object type: BULLET
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A modern lead bullet. weight - 29.09g; Length - 24.34mm; Diameter - 14.95mm (0.588 inches). The bullet has 3 circumferential grooves, with rouletting and a hollowed base of depth c.3.9 mm. The diameter suggets this may be for the Martini Henry rifle, which equipped the British Army in the later 19th century, and at all events are for a rifle of military specification.
Created on: Sunday 13th May 2018
Last updated: Tuesday 15th May 2018
Spatial data recorded.

Record ID: NCL-536837
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
A near complete barbed and tanged flint arrowhead. The tip and part of one barb are missing. The flint is and mid brown with a mid-gloss patina. Both faces show covering low angle scaled and sub-parallel retouch. Dimensions: Length, 24.39mm; Width, 16.82mm Weight, 1.26g
Created on: Monday 4th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: NCL-92F94E
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
Description: A silver seal matrix with an ovate die and hexagonal faceted stem tapering up to a collar and the now missing terminal. The broken terminal consists of a rectangular cross-sectioned bar perpendicular to the stem, broken at both ends, with two broken stems extending upwards. This is consistent with a trefoil handle. The die depicts a bird standing, facing right with wings erect. The bird is within a beaded border. The curved beak, and bells on the legs indicate a bird of prey, probably a falcon.  Dimensions: The matrix measures 10.26mm tall; the die is 12.50mm long a…
Created on: Thursday 7th June 2018
Last updated: Sunday 22nd October 2023
Spatial data recorded.

• 

  Image not taken

Record ID: NCL-15A8DD
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
An incomplete copper alloy Roman or later furniture fitting (c. AD100-400). The object has a rounded top, with a circular cross-section, and has a spherical knop with central dimple on its apex. From the rounded top the object tapers in and out again to form a 'waist', with a step between the top and the 'waist'. There is a further step betwen the 'waist' and the foot of the fitting which is a flat, circular base. There is a circular protrusion for attachment on the underside of the base. The object may be a handle or knob. Simlar examples recorded on the PAS database can be seen in r…
Created on: Wednesday 13th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.

Record ID: NCL-CB39DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation
An incomplete copper-alloy medieval buckle that conforms well to a Meols type 10 c.AD 1350 - 1400. The pin is missing, leaving just the frame. The buckle is a single looped, oval with a narrowed and offset bar and ornate outer edges. Two prominent knops flank two grooves on the outer edge of the loop which act as rests for the pin. The buckle weighs 4.15g; is 20.27mm deep and 26.09mm wide.
Created on: Friday 22nd June 2018
Last updated: Thursday 14th February 2019
Spatial data recorded.