Record ID: NCL-2696E2
Object type: SHEET
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A lead sheet with the impression of a Roman coin. The coin impresion is of a Siliqua from the reign of Gratian (367-383) - Reece Period 19. The lead sheet is sub-rectaungular in plan and weighs 70.50g; is 56.23mm long; and has a maximum width of 34.07mm and a minimum width of 26.22mm. It is 4.91mm thick. The impression is situated at the widest part of the sheet and some dammage has occured to the upper right quadrant of the object, which includes part of the impression. The sheet has a transverse cut just below the coin impression. It is conceivable that this was made for casting …
Created on: Friday 9th March 2018
Last updated: Tuesday 5th June 2018
Spatial data recorded.

Record ID: NCL-271C9A
Object type: STUD
Broad period: IRON AGE
County: Northumberland
Workflow stage: Published
An incomplete cast copper-alloy cup-headed stud inlaid with green enamel. Sally Worrell has comented that such studs are late Iron Age or Early Roman, usually with either a blue or red enamel (see FAKL-FCD5C7). This example has a green enamel with no traces of blue or red. The head is cup-shaped and is roughly circular in plan. The diameter of the head is 14.44mm and the cup has a thickness of 5.57mm. On the under side of the cup is a truncated shank, 4.65mm diameter x 2.44mm long. Objects like this occur in Iron Age contexts with parallels from Dinorben, Abergele, Denb. (Savory 19…
Created on: Friday 9th March 2018
Last updated: Monday 25th February 2019
Spatial data recorded.

Record ID: NCL-B4F01A
Object type: COIN
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver siege coin struck at Newark dated to 1645 to 1646. It is a lozenge shape and weighs 5.13g; length 34.94mm; width 31.10mm. A post-medieval silver 'siege piece' struck at Newark. The coin is lozenge shaped. The obverse depicts a crown flanked from left to right by C and R. The crown has eight pellets on the left arch and nine on the right. Due to wear it is possible that some pellets cannot be seen. Below the crown are the numerals XII, which denotes the denomination as a shilling. All these are enclosed by an off-centred lozenge perimeter of pellets. The reverse has an …
Created on: Thursday 3rd May 2018
Last updated: Thursday 3rd May 2018
Spatial data recorded.

Record ID: NCL-09E1D4
Object type: COIN
Broad period: MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A silver short-cross penny of Henry II class 1b1: mint, London: moneyer RAVL. date AD 1180-1185. The weight is 1.26g, the diameter is 19.01mm and the thickness is 0.70mm. Obverse: hENRICVS REX, Crowned bust facing with sceptre. Reverse: + (cross pattée) RAVL·ON·LVND, Voided short cross with a quatrefoil in each quadrant N926; p220
Created on: Monday 7th May 2018
Last updated: Saturday 12th May 2018
Spatial data recorded.

Record ID: NCL-563B57
Object type: COIN
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation
A complete silver short-cross penny of Richard I. There are 7 pearls to the crown and the letter N is wide, the beard is made up of small pellets. There are two un-pelleted curls on the L and two or three on the R. Based on this the coin belongs to Richard I; North class 3ab2 or class 4a. The busts on these coins can be either large, small, wide or thin. Date is c.1190-1200. Moneyer and mint are WILLELM of London, though WILLELM can also be spelt as WILLEM on these coins due to the space taken up by the enlarged letter N and A. The coin has a weight of 1.04g and a diameter of 17.74mm
Created on: Friday 11th May 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: NCL-8884D3
Object type: BULLET
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
A modern lead bullet. weight - 29.09g; Length - 24.34mm; Diameter - 14.95mm (0.588 inches). The bullet has 3 circumferential grooves, with rouletting and a hollowed base of depth c.3.9 mm. The diameter suggets this may be for the Martini Henry rifle, which equipped the British Army in the later 19th century, and at all events are for a rifle of military specification.
Created on: Sunday 13th May 2018
Last updated: Tuesday 15th May 2018
Spatial data recorded.

Record ID: NCL-536837
Object type: BARBED AND TANGED ARROWHEAD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
A near complete barbed and tanged flint arrowhead. The tip and part of one barb are missing. The flint is and mid brown with a mid-gloss patina. Both faces show covering low angle scaled and sub-parallel retouch. Dimensions: Length, 24.39mm; Width, 16.82mm Weight, 1.26g
Created on: Monday 4th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.

Record ID: NCL-92F94E
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Northumberland
Workflow stage: Awaiting validation
Description: A silver seal matrix with an ovate die and hexagonal faceted stem tapering up to a collar and the now missing terminal. The broken terminal consists of a rectangular cross-sectioned bar perpendicular to the stem, broken at both ends, with two broken stems extending upwards. This is consistent with a trefoil handle. The die depicts a bird standing, facing right with wings erect. The bird is within a beaded border. The curved beak, and bells on the legs indicate a bird of prey, probably a falcon.  Dimensions: The matrix measures 10.26mm tall; the die is 12.50mm long a…
Created on: Thursday 7th June 2018
Last updated: Sunday 22nd October 2023
Spatial data recorded.

• 

  Image not taken

Record ID: NCL-15A8DD
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Northumberland
Workflow stage: Awaiting validation
An incomplete copper alloy Roman or later furniture fitting (c. AD100-400). The object has a rounded top, with a circular cross-section, and has a spherical knop with central dimple on its apex. From the rounded top the object tapers in and out again to form a 'waist', with a step between the top and the 'waist'. There is a further step betwen the 'waist' and the foot of the fitting which is a flat, circular base. There is a circular protrusion for attachment on the underside of the base. The object may be a handle or knob. Simlar examples recorded on the PAS database can be seen in r…
Created on: Wednesday 13th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.

Record ID: NCL-CB39DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation
An incomplete copper-alloy medieval buckle that conforms well to a Meols type 10 c.AD 1350 - 1400. The pin is missing, leaving just the frame. The buckle is a single looped, oval with a narrowed and offset bar and ornate outer edges. Two prominent knops flank two grooves on the outer edge of the loop which act as rests for the pin. The buckle weighs 4.15g; is 20.27mm deep and 26.09mm wide.
Created on: Friday 22nd June 2018
Last updated: Thursday 14th February 2019
Spatial data recorded.

Record ID: NCL-11D7B8
Object type: COIN
Broad period: MODERN
County: Northumberland
Workflow stage: Awaiting validation
A silver coin of George III dated 1816 5.31g 23.58 dia 1.23 thickness Axis12
Created on: Friday 20th July 2018
Last updated: Wednesday 20th April 2022
Spatial data recorded.

Record ID: NCL-7D1AAB
Object type: COIN
Broad period: ROMAN
County: Cumbria
Workflow stage: Published
A copper-alloy Roman nummus of Constantine I (AD 306-337), dating to the period AD 310-312 (Reece period 15). CONCO-R-D MILIT reverse type depicting Concordia standing left holding two standards. Mint of London. This is a variant of RIC VI, p. 136, no. 195. The type is published by Cloke and Toone (2015: pp. 176-177, no. 7.04.007), who note seven examples from just two obverse dies. Weight 3.04g; Diameter 22.95mm; Thickness 1.95mm;
Created on: Tuesday 11th September 2018
Last updated: Wednesday 17th January 2024
Spatial data recorded.

Record ID: NCL-D44613
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published
A silver Roman denarius of Vitellius (AD 69), dating to the period AD 69 (Reece period 4). XV VIR-SACR FAC reverse type depicting a Tripod-lebes with dolphin lying right on top, raven standing right below. Mint of Rome. As RIC I (2nd ed.), p. 272, no. 86.
Created on: Wednesday 10th October 2018
Last updated: Thursday 17th January 2019
Spatial data recorded.

Record ID: NCL-A78286
Object type: HOARD
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Awaiting validation
Late Bronze Age hoard Date: c. 950-800 cal BC The hoard comprises a sword broken into four pieces, a harness ring, toggle and socketed axe all dating to the Ewart park phase of the Bronze Age. Axehead 1)    A complete Late Bronze Age socketed axehead dating to the c. 950-800 cal BC.  The axe-head has an overall length of 64.7mm. It comprises a collared socket below which the body widens gradually from 29.5mm to c.34.8mm down most of its length before flaring more in sharp concave curves to form a winged crescent blade that has a maximum width of 43.9mm It has one i…
Created on: Wednesday 19th December 2018
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Near Bellingham', grid reference and parish protected.

Record ID: NCL-F46496
Object type: COIN
Broad period: ROMAN
County: Sunderland
Workflow stage: Published
A copper-alloy Roman sestertius of Vespasian (AD 69-79), dating to the period c.AD 77-78 (Reece period 4). [SALVS] AVGVSTA, S C reverse type depicting Salus seated left holding patera and sceptre. Mint of Lyon. As RIC II (2nd ed.), p. 146, no. 1208.
Created on: Wednesday 16th January 2019
Last updated: Thursday 7th February 2019
Spatial data recorded.

Record ID: NCL-09DE93
Object type: RING
Broad period: POST MEDIEVAL
County: Sunderland
Workflow stage: Awaiting validation
Post medieval or modern copper-alloy signet ring with shield-shaped bezel, decorated shoulders and plain hoop. The hoop is D-shaped in cross section. The ring has thick, wide shoulders, supporting a flat, shield-shaped bezel. The bezel has a pointed base, incurved long edges and a top edge with two incurved part, reaching a point at the centre. This shield shape suggests an 18th or 19th century date. The ring is intact but is in poor condition and its surface is very pitted. There are a few similar examples in the database, including DYFED-45A57E, HAMP-5F0686 and HAMP-0320E4. Ins…
Created on: Thursday 17th January 2019
Last updated: Wednesday 19th May 2021
Spatial data recorded.

Record ID: NCL-066786
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Northumberland
Workflow stage: Published
A gold lock-ring and three small fragments of gold. The lock-ring is decorated with a series of incised concentric lines. One edge of the lock-ring is broken in a ragged edge, the other follows a neat line that may represent the original edge or a cut mark. The lock-ring is in a moderate condition, with cuts and distortion across its faces. There is evidence of tubing holding the two faces together (this has lifted in one section to reveal this construction technique). Around 1 quarter of the object is now missing and it is unclear from the initial inspection whether the small gold fra…
Created on: Tuesday 29th January 2019
Last updated: Tuesday 13th June 2023
Spatial data recorded.

Record ID: NCL-1C87EA
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Description: Incomplete silver annular brooch of the Medieval period (1350-1400). The subcircular frame has a flattened, rectangular cross-section. The frame is undecorated on the reverse. The front is inscribed in Lombardic capitals reading: IESVS NAZAREN[VS]. The inscription starts and ends at the pin constriction. The pin has a D-shaped cross-section, with an integral cross-bar that divides the tapering pin from the straight-sided hook for attaching to the frame. The pin has become detached from the frame and about two thirds of it is preserved. The brooch is in three fragment…
Created on: Wednesday 30th January 2019
Last updated: Thursday 3rd March 2022
Spatial data recorded. This findspot is known as 'Near Stickford', grid reference and parish protected.

Record ID: NCL-4ACEC6
Object type: COIN
Broad period: ROMAN
County: Northumberland
Workflow stage: Published
A copper-alloy nummus of Constans (AD 333-350), dating to the period c.AD 337-340 (Reece period17). GLOR-IA EXERC-ITVS reverse type depicting Two soldiers standing either side of one standard. Mint of Cyzicus. As RIC VIII, p. 491, no. 22. Weight - 1.58g; Diameter - 14.96mm Axis; 6 O'Clock
Created on: Wednesday 3rd April 2019
Last updated: Friday 5th April 2019
Spatial data recorded.

Record ID: NCL-61E7AD
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A complete cast copper alloy dress hook of early Post-Medieval date, c. AD 1500 - 1700. The dress hook is of Read's Class E, Type 3: circular in plan and with a rectangular attachment loop. The dress hook has a cast openwork body, with a central cross; each quarter has an openwork trefoil or quatrefoil. The outer edge of the body is decorated with a line of pellets. The hook at the base is complete, but bent. Parallels include FAKL-14FC6A, YORYM-681DC6 and Read (2008) p. 99 number 370-371.
Created on: Thursday 4th April 2019
Last updated: Wednesday 11th August 2021
Spatial data recorded.