Record ID: NMGW-1564D4
Object type: HOARD
Broad period: BRONZE AGE
County: Pembrokeshire
Workflow stage: Published
Late Bronze Age hoard of ten objects. 1. Carp's Tongue sword blade fragment Surviving length 41.0mm; surviving width 27.7mm; maximum thickness 9.5mm; surviving weight 35.2g. Small blade fragment with a rounded midrib, approximately 11.8mm wide, with edge defined by single grooves to either side and on both faces. The outer sections of the blade are highly corroded, with no original blade edge surviving. The blade fragment is bent towards one end, as viewed side on, indicating it was forcibly broken in antiquity. The fragment has a green patination, with areas of ligher green …
Created on: Tuesday 22nd September 2015
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: NMGW-872F95
Object type: BLADE
Broad period: BRONZE AGE
County: Flintshire
Workflow stage: Published
Bronze Age bronze blade. The blade is incomplete and fragmentary, in two pieces (the upper fragment has a length and weight of 75.2mm and 25.2g respectively, the lower part is similarly 39.6mm and 8.5g, with a combined dimensions of 110.9mm and 33.7g). The butt or hilt is missing with no evidence for rivet holes or a tang but the top of the blade does not appear to be widening (with a width of 17.2mm). The blade has a prominent rounded midrib of consistent width and thickness (of 4.0mm width and 4.0mm thick). The original blade edges have been lost but the surviving edge is compa…
Created on: Thursday 5th March 2015
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: NMGW-844D42
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Denbighshire
Workflow stage: Published
Early to Middle Bronze Age bronze Group I, Primary Shield Pattern palstave of Acton Park Metalworking Industry and of Needham's (1996) Periods 4-5, c. 1600 - 1400BC. The palstave is near-complete, missing one blade tip (with a length of 163mm, it was not possible to obtain a weight). The butt is near-straight. (22.3mm wide and 5mm thick). The sides are straight and near-parallel as far as the stop and is comparatively slender (at 25.0mm wide and 25.4mm wide at the stop). The sides are not nicked below the stop but are concave and divergent to produce a moderately expanded blade e…
Created on: Thursday 5th March 2015
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: NMGW-7399CD
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Pembrokeshire
Workflow stage: Published
Late Bronze Age bronze socketed axe probably of Type Portree or a variant, possibly Variant Kalemouth, as defined by Schmidt & Burgess (1981, p. 184-90) possibly dating to the transition of the Wilburton-Wallington and Ewart Park metalworking phases corresponding to Needham's (1996) Periods 6 to 7, c. 1150 -750BC. The axe is of 'Baggy' form and is incomplete, missing the mouth and loop (with a surviving length of 55.5mm and a weight of 74.8g with the wood in the socket and 73.3g without). The top of the axe has broken or is eroded, probably just below the mouth. The mouth is oval…
Created on: Wednesday 4th March 2015
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: NMGW-715DFC
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
Middle Bronze Age bronze side-looped socketed spearhead of Davis' (2012, 53-58) Group 4: Plain kite blade, dating to the Acton Park metalworking phase (1500-1400 BC) (Needham et al. 1997). The spearhead is near-complete with peripheral damage to the mouth and tip (with a length of 103.9mm and a weight of 66.0g). The socket is circular (with an internal diameter of 17.2mm and an external diameter of 20.2mm) and has a rounded step just above the mouth. The socket has not been completely cleaned-out (and has a current depth of 23mm) and contains bronze corrosion. The sides of the soc…
Created on: Wednesday 4th March 2015
Last updated: Friday 13th October 2023
Spatial data recorded.

Record ID: NMGW-70ABE9
Object type: BLADE
Broad period: BRONZE AGE
Workflow stage: Awaiting validation
Copper alloy blade, probably a blade edge fragment from a Bronze Age axe of indeterminate type and date. The axe is fragmentary, represented by the blade edge only (with a width of 36.5mm, a surviving length of 14.0mm, a maximum surviving thickness of 6.0mm and a weight of 11.0g). The break occurred in antiquity and there is no socket base evident on the fragment. The blade edge is convex and is incomplete, with approximately two-thirds represented. The original edge has been lost through corrosion. The surface is heavily-pitted and corroded and very little of original surface survive…
Created on: Wednesday 4th March 2015
Last updated: Monday 17th October 2022
No spatial data available.

Record ID: NMGW-709985
Object type: BLADE
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Middle Bronze Age bronze blade, possibly a dirk of Group II blade with a damaged butt. The dirk is incomplete with some peripheral damage to the butt and some distortion (with a length of 131.4mm and a weight of 19.7g). The shoulders are eroded but are probably close to their original width (with a surviving width of 39.2mm). The original form of the hilt is now uncertain and there are no definitive arcs from rivet holes present along the edges although it is possible to suggest an arc at the apex, towards the more complete shoulder side. The butt is thinned (with a thickness at th…
Created on: Wednesday 4th March 2015
Last updated: Monday 2nd October 2017
Spatial data recorded.

Record ID: NMGW-5C3455
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: the Vale of Glamorgan
Workflow stage: Published
Late Bronze Age socketed axe of faceted type, Type Meldreth, variant Aylsham, as defined by Schmidt & Burgess (1981, p 204-8) and of late Wilburton to Ewart Park metalworking phases, corresponding to Needham's (1996) Periods 6 to 7, c. 1150 -750BC The axe is fragmentary and damaged, missing the blade and part of the mouth and is partially filled with sediment (with a surviving length of 78.4mm and a weight of 101.6g). The socket mouth is circular and incomplete, with a little over half remaining (with a diameter of 33.0mm). Below the socket, the mouth is concave (for 11mm) before…
Created on: Tuesday 3rd March 2015
Last updated: Monday 2nd October 2017
Spatial data recorded.

Record ID: NMGW-F0B7C3
Object type: BLADE
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Published
Middle Bronze Age bronze blade, possibly a dirk of Group II or III blade with a damaged butt The dirk is incomplete with some peripheral damage to the butt and upper part of the blade (with a length of 135.2mm and a weight of 32.6 g). The top edge of the butt is damaged and irregular, with a number of arcs, possibly related to rivet holes but none of which may now be identified with any certainty. The dirk is thinnest at the butt (with a thickness of 0.8mm) and is widest across the eroded shoulders (with a surviving width of 38.7mm). The original form of the hilt is now uncertain…
Created on: Thursday 26th February 2015
Last updated: Monday 2nd October 2017
Spatial data recorded.

Record ID: NMGW-487432
Object type: BLADE
Broad period: BRONZE AGE
County: Swansea
Workflow stage: Awaiting validation
Middle Bronze Age bronze blade, possibly a dirk of Group IV blade with a damaged butt. The dirk is incomplete with some peripheral damage to the butt (with a length of 124.3mm and a weight of 29.3g). The shoulders are eroded but appear to have been comparatively broad (with a surviving width of 48.2mm) and is better preserved on one side. The original form of the hilt is now uncertain although it may have been of trapezoidal form with differential corrosion to the apex of the butt, which now has convergent sides. There are no definite rivet holes evident but there is a notch at t…
Created on: Wednesday 18th February 2015
Last updated: Monday 2nd October 2017
Spatial data recorded.