Record ID: LVPL-FA0FE3
Object type: COIN
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Gold stater of the Corieltauvi tribe. South Ferriby type. C.f. Hobbs/BMC no. 3161; c.f. Van Arsdell no. 811
Created on: Monday 25th June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Yorkshire', grid reference and parish protected.

Record ID: LVPL-BFE262
Object type: STUD
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy and enamel stud dating from the Iron Age. The stud is circular in plan and is 6.95mm deep. It has a central triangle filled in with white enamel. This leaves 3 lentoid shapes around its edge which are filled with red enamel. The different colours are separated by a metal strip. On the reverse is the remains of a stud which may have been iron as there is some iron corrosion. The edges of the stud are rounded. The stud has a dark green patina which is slightly pitted, with the orange iron on the reverse.
Created on: Thursday 13th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-278105
Object type: COIN
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
Gold stater from the Iron Age, South Ferriby type, c. 20 BC - AD 10 BMC Hobbs 3152ff Van Arsdell 811-5
Created on: Tuesday 19th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DUR-8BD935
Object type: COIN
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
Gold stater - Corieltavi / North-Eastern, c. 20 BC - AD 10 Obv. Wreath, cloak and crescents - but very weak die so type almost worn out Rev. Lunate horse left; star below Rudd ABC p. 92, no. 1752 Van Arsdell 819-3
Created on: Friday 3rd December 2010
Last updated: Thursday 6th January 2011
Spatial data recorded.

Record ID: DUR-4E3C45
Object type: STUD
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
Copper alloy and enamel cast-cell stud from the late Iron Age- early Roman period. It is circular in plan, flat on the top (enamelled face) and curved on the base. The base is plain and shows no obvious traces of attachment or remains of a stud. The front is split into three rows of three cells by raised lines of copper alloy. This gives a chequerboard pattern. The cells are filled with enamel, alternating red and yellow. Chequerboard enamelling can be seen on other Iron Age objects such as harness equipment, for example two linch pins recorded on the PAS database as WMID-947693…
Created on: Wednesday 23rd February 2011
Last updated: Thursday 23rd August 2018
Spatial data recorded. This findspot is known as 'Dalton Area', grid reference and parish protected.

Record ID: DUR-4ED915
Object type: STRAP FITTING
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy and enamel, Late Iron Age/ Roman belt slide. It is lozenge shaped in plan with an openwork design. The outer edge is decorated with a single row of red enamelled dots, some of which are missing the enamel. The central section looks like a 'swash-N' (as described by Macgregor, 1976) which consists of a 4-armed motif with each arm meeting a corner of the lozenge. In the centre are two raised pointed ovals as decoration. The arms which run from top left to bottom right are longer and wider than the other two as the motif is twisted and they have further decor…
Created on: Wednesday 23rd February 2011
Last updated: Thursday 30th June 2011
Spatial data recorded. This findspot is known as 'Dalton Area', grid reference and parish protected.

Record ID: LVPL-B80C95
Object type: BUTTON AND LOOP FASTENER
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Iron Age button and loop fastener, Wild Class II. Dated from the 1st century BC to the 1st century AD. This is a ring-headed type fastener and has a circular ring. The shank is broken just as it widens into the loop (which would probably have been sub-circular). It is bent at a 90 degree angle so that it lies roughly parallel to the ring.
Created on: Tuesday 8th April 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-B819F2
Object type: BROOCH
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy La Tene III or Nauheim derivative type bow brooch dating from c.1st century BC to the 1st century AD. A simple one piece sprung brooch. It is mostly complete although some of the spring and the pin are missing, as is the catchplate. The brooch has a backwards curving hook which would have supported the spring. There is a very simple cross bar which has folded over ends to encase the spring. Three coils remain of the spring, it is most likely to have been 6 coils. The bow is slender and simple, there would have been a small, basic catchplate at the foot but this has bro…
Created on: Tuesday 8th April 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DUR-6FB102
Object type: COSMETIC MORTAR
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
Cast copper alloy Late Iron Age- early Roman cosmetic mortar of end-looped type. It has a crescent shaped bow that is U-shaped in section with one pointed terminal end and an incomplete looped terminal at the other. It is from a set which would have seen the pestle fitting into the mortar. On the interior surface is a central groove that is pointed-oval shaped in plan. The end without the loop has a slight narrowing to form a neck before the rounded point at the end. At the looped terminal end the bow curves slightly outwards to form the loop, this is not complete. The loop would have…
Created on: Tuesday 27th April 2010
Last updated: Monday 9th September 2013
Spatial data recorded. This findspot is known as 'Sancton', grid reference and parish protected.

Record ID: DUR-060A03
Object type: COIN
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Gold stater of the Corieltauvian type, dating to 45-10BC. VA no- 825 Hobbs British Museum Catalogue- 3181-3183
Created on: Tuesday 3rd November 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NCL-2F3B81
Object type: BROOCH
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cu alloy umbonate brooch with some red and yellow enamel remaining. The pin and most of the catchplate and hinge mechanism are missing. The brooch is cast integrally. There is a raised central circular boss, a circular tab at the tope which held the hinge mechanism and a triangular tab at the bottom which is the catchplate. The front of the hinge mechanism is decorated with two arches side by side filled with yellow enamel. The central boss is conical and is decorated by a rosette of cells in the centre surrounded by a ring. Red enamel is used in this part. The front of …
Created on: Thursday 9th November 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NCL-C38CC6
Object type: HARNESS FITTING
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
A 1st to mid 2nd century AD highly tinned copper-alloy knobbed terret. In section the hoop is circular, it is almost black and is not complete. It has broken off so that less than a semi-circle remains and the bar is not present. At what would have been the top of the hoop is a globular knob with an incised line running around the circumfrence. Near to one end is a projecting disc set transverse to the hoop which the the hoop runs through.
Created on: Thursday 16th November 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NCL-091917
Object type: BROOCH
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy La Téne brooch from the Iron Age period. Copper alloy La Téne II Type 4 (Hull & Hawkes 1987) brooch which is almost complete, the point of the pin being the only thing missing. Type 4 brooches are described as brooches with multi-looped wire either forming the bow or set along it's top. The main body of the brooch is made of one piece of wire which has been twisted into the shape of the brooch. The top is a single loop, then the wire is straight until it reaches the catch mechanism where it bends at a right angle. It is then twisted to form a D-shaped loop for the…
Created on: Monday 12th February 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-F94806
Object type: HARNESS FITTING
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Published
Cast copper alloy Simple terret ring dating from the 1st century BC through to the 1st century AD. The ring is circular with a flattened base. It is wider at the base. There is a moulded collar with 2 ridges at each side of the strap bar. The rest of the terret is undecorated.
Created on: Saturday 5th July 2008
Last updated: Thursday 23rd November 2023
Spatial data recorded.

Record ID: DUR-EE7BA7
Object type: BROOCH
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Large early Roman/ Iron Age brooch Hallstatt Group B?
Created on: Tuesday 26th January 2010
Last updated: Thursday 4th January 2024
Spatial data recorded.