Record ID: DUR-EE7BA7
Object type: BROOCH
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Large early Roman/ Iron Age brooch Hallstatt Group B?
Created on: Tuesday 26th January 2010
Last updated: Thursday 4th January 2024
Spatial data recorded.

Record ID: DUR-11AAE3
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: County Durham
Workflow stage: Awaiting validation
Cast bronze side-looped, socketed spearhead from the early Middle Bronze Age, c.1500-1150 BC. Mostly complete with the tip missing and worn blade edges. The blade would have been leaf-shaped and has a raised midrib on both sides running from top to bottom. The socket widens towards the end. It has two small side-loops about half way down. These are rectangular and have been cast integrally with the spear. The socket is slightly out of shape with the edge being uneven, however it is mostly circular in section and hollow. Nothing of the wooden shaft remains. Side-looped spearheads are …
Created on: Tuesday 10th August 2010
Last updated: Wednesday 21st June 2023
Spatial data recorded.

• 

  Image not taken

Record ID: DUR-FC1A94
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy sestertius of Marcus Aurelius as Augustus (161-180), minted in Rome 174. Reverse- Seated figure: IMP [VII] COS [III], [SC] RIC III, p.301, no.1109 FInders ref- 4
Created on: Friday 28th May 2010
Last updated: Wednesday 19th April 2023
Spatial data recorded. This findspot is known as 'Malton Area', grid reference and parish protected.

Record ID: DUR-B80830
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy clipped sestertius of Hadrian, 117-138 AD
Created on: Wednesday 1st July 2009
Last updated: Wednesday 19th April 2023
Spatial data recorded.

Record ID: DUR-1B73E3
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation
Cast copper alloy Post Medieval finger ring, a decade ring, dating to c.1600-1800. It is circular in plan with a projecting flat circular bezel (diameter of 10.77mm) and ten small projecting knops around the outer circumference. The bezel is decorated with the grooved letters 'IHS', with a cross on the top of the H and an arrow pointing out of the bottom of it. Decade rings were used for the rosary- to repeat the Ave and Paternoster prayers. They were introduced in the 10th century but became more popular at times of religious tension, in particular the 16th century onwards. …
Created on: Tuesday 29th March 2011
Last updated: Tuesday 24th January 2023
Spatial data recorded.

Record ID: DUR-D79EC8
Object type: COIN
Broad period: POST MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation
Copper alloy Scottish turner of Charles I (1625-49), either 1642, 1644, 1648 or 1650. It is extremely worn and corroded.
Created on: Tuesday 20th April 2010
Last updated: Friday 13th January 2023
Spatial data recorded.

Record ID: DUR-8DF7F1
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Fragment of an early Bronze Age flat axe, c. 2500- 1700 BC in date. It is the blade and the lower part of the shaft which remains. It is corroded all over the surface and this has caused pitting. The blade edge is uneven with bits missing and worn away. The axe has a rectangular cross-section, narrowing towards the blade which splays out from the shaft. The blade measures 46.13mm in width, the shaft 27.97mm.
Created on: Friday 3rd December 2010
Last updated: Monday 12th December 2022
Spatial data recorded.

Record ID: DUR-F2F216
Object type: AXEHEAD
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation
Blade fragment of a Bronze Age axe, c.2300 BC- 800 BC. The blade edge is curved, and appears complete. It has broken before the shaft, having a rectangular cross-section at the broken edge where it is thickening. The axe has a dark brown patina which is slightly patchy due to corrosion. As so little remains it is not possible to pin it down to a certain type of axe, or a more specific period within the Bronze Age.
Created on: Wednesday 8th June 2011
Last updated: Friday 9th December 2022
Spatial data recorded.

Record ID: DUR-C4D8C4
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation
Bronze Age flanged axe, from the Aylesford and Arreton periods, c. 1700-1500 BC. The handle is slightly narrower at the butt than where it meets the blade (the central point has a width of 31.09mm). The side flanges are low and are at their highest in the central point of the handle. At this central point the handle is also thickest, with a small raised horizontal ridge just visible. The blade is semi-circular and at its widest point measures 84.91mm wide. It still narrows to a thin cutting edge all along the blade edge. It is almost complete with just the butt and blade edges being …
Created on: Monday 18th October 2010
Last updated: Monday 5th December 2022
Spatial data recorded.

Record ID: DUR-91CEE5
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy fragment, probably from a Medieval chafing dish. It is a W shape in plan with both ends being broken, they would probably have extended upwards to form a loop, this would then have attached onto the dish. The fragment is square in cross-section with slightly bevelled edges and file marks can be seen on the surface. Chafing dishes were domestic utensils made of metal or earthenware for holding burning charcoal or other combustible material. This was then used to cook food or keep it hot at the table.
Created on: Friday 3rd December 2010
Last updated: Monday 11th July 2022
Spatial data recorded.

Record ID: DUR-F4B4B2
Object type: PALSTAVE
Broad period: BRONZE AGE
County: North Yorkshire
Workflow stage: Awaiting validation
Cast bronze Palstave axe, dating to the Penard/Wilburton phases, c. 1300- 1000 BC. It is mostly complete but the blade is slightly broken and the handle has broken and is missing just the very end, and the butt. It has a single small side-loop, which measures 22.96mm in length. The blade has uneven edges, and is corroded, with pitting on the surface, it appears to be missing the cutting edge. The blade is quite small (40.38mm wide), and then narrows to a rectangular section leading to the handle. It is plain and has no ribbing or hollows. The septum on both sides of the hand…
Created on: Wednesday 8th June 2011
Last updated: Tuesday 12th October 2021
Spatial data recorded.

Record ID: DUR-650407
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation
Cast copper alloy shield shaped Medieval harness pendant It is decorated on the front face with 3 horizontal lines of towers with 4 on the top line, 3 on the middle and 2 on the bottom. The toweres are picked out in red (gules) enamel. The pendant has a broken attachment loop at the top. Irene Szymanski has seen an image of this item and commented- 'I think these are the arms of Ferrers and the earls of Derby, "vairy or and gules" (attached). The de Ferrers were a powerful and bellicose clan, who married wives of the highest rank; for example, Earl William de Ferrers (died 1254) marri…
Created on: Tuesday 8th September 2009
Last updated: Wednesday 12th May 2021
Spatial data recorded. This findspot is known as 'Durham Area', grid reference and parish protected.

Record ID: DUR-651663
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: County Durham
Workflow stage: Awaiting validation
Cast copper alloy quatrefoil medieval harness pendant It has four semi-circular lobes with a triangular point in between each lobe. It is decorated on the front face with enamel. In the centre is a dragon passant left in red (gules). The dragon is inside a square, on each side of this a lis extends out. The field is blue (azure). The pendant has a broken attachment loop at the top which is set perpendicular. Irene Szymanski has seen a photograph of this pendant and comments that this design is fairly common. If you go to IHS-11E882; its associated finds will link to other examples. Th…
Created on: Tuesday 8th September 2009
Last updated: Monday 10th May 2021
Spatial data recorded. This findspot is known as 'Durham Area', grid reference and parish protected.

Record ID: DUR-1276F2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy enamelled Medieval harness pendant. It is shield shaped with a circular attachment loop set perpendicular to the pendant at the top. The pendant's upper surface features moulded heraldic decoration in the form of three lions passant guardant arranged one above the other. The field is inlaid with red enamel and, although no trace survives of gilding, it is supposed that this is the typical English arms, 'Gules three lions passant guardant [Or]'. Many such examples can be found illustrated in Ashley (2002, 10; e.g. ref. 50). The red-brown metal is indicative …
Created on: Tuesday 10th August 2010
Last updated: Friday 23rd April 2021
Spatial data recorded.

Record ID: DUR-A54350
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation
Cast copper alloy medieval harness pendant dating to post 1376- c.1450. It has a field of blue enamel with three raised fleur-de-lys, two above and one below, (azure, three fleurs de lys or). The fleur-de-lis and the thin border have been gilded. There is an attachment loop set perpendicular to the pendant at the top, the loop is broken. Irene Szymanski has seen an image of this pendant and comments 'It's what's known as France Modern, France Ancient (azure, semy de lys or) was similar, except that there were an unspecified number of fleurs-de-lys scattered over the blue bac…
Created on: Monday 24th May 2010
Last updated: Thursday 22nd April 2021
Spatial data recorded.

Record ID: DUR-6D57F0
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete copper alloy continental plate brooch of the Roman period (c.AD43-125). It is incomplete, consisting of two circles, joined by a linear strip. Each circle is flat and is decorated on the front with a single ring and dot motif. The strip which joins the two circles is decorated with a simple moulded collar at each end and narrows slightly in the middle. The left hand circle (as per the photograph)has the start of another joining strip but it has broken just below the collar. On the reverse of the right hand circle (as per the photograph) is the remains of either a ca…
Created on: Monday 1st February 2010
Last updated: Wednesday 14th April 2021
Spatial data recorded.

Record ID: DUR-29C6D5
Object type: STUD
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman stud (c.AD43-410). It is a bell shaped stud which has lost part of its circular stud and also the handle. The handle base can be seen on the top of the stud as a raised circle. Edit: Bell Shaped Studs are a multi-purpose form of artefact, commonly found on sites in Britain dating to the Roman period. A basic classification for these studs was established by Allason-Jones (1985): Type 1 with iron shank, usually caulked or fixed into the head with lead; Type 2 with (usually) integrally cast copper-alloy shank, often pierced at the distal end. Type 2 studs ar…
Created on: Tuesday 17th November 2009
Last updated: Thursday 4th February 2021
Spatial data recorded.

Record ID: DUR-29BDC5
Object type: STUD
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman furniture fitting. It is a bell shaped stud with a rectangular handle/shaft set on the top. The stud has a small central protrusion which is like the clapper of a bell. There is a small moulded collar between the stud and the base of the handle The handle has a small circular hole at the top. Edit: Bell Shaped Studs are a multi-purpose form of artefact, commonly found on sites in Britain dating to the Roman period. A basic classification for these studs was established by Allason-Jones (1985): Type 1 with iron shank, usually caulked or fixed into the head…
Created on: Tuesday 17th November 2009
Last updated: Thursday 4th February 2021
Spatial data recorded.

Record ID: DUR-8474E1
Object type: MOUNT
Broad period: IRON AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy Iron Age/Roman anthropomorphic vessel mount. It consists of a human head at the top of a slightly curved linear section (meant to represent the body). The head is round and has detailing picking out the hair and face. The hair is represented by grooved lines radiating from a central point on the top of the head. The eyes are round and hollow, the nose is raised and slightly bulbous. The mouth is a grooved line, almost giving the appearance it has its mouth open. The head is sat on a shape neck which then leads into the main section of the mount. This section ex…
Created on: Tuesday 2nd February 2010
Last updated: Monday 1st February 2021
Spatial data recorded.

Record ID: DUR-217460
Object type: BROOCH
Broad period: ROMAN
County: County Durham
Workflow stage: Awaiting validation
An incomplete copper alloy dragonesque brooch, dating to the early Roman period (c.AD50-200) The object comprises an incomplete curvilinear plate in an S-shape, with squared bar terminals (one of which is missing). Across the wider body section are two further bars with an inscription between, of which "...N OR..." can be read. The reverse of the object is undecorated. Dimension: Length 29.89mm; Width 23.88mm; Thickness 4.94mm; Weight 7.8gm. The brooch conforms to the type desinated by Hunter (2010) as as Type C3, S-shaped brooch with bar terminals, and by Mackreth (2…
Created on: Thursday 17th March 2011
Last updated: Friday 13th November 2020
No spatial data available.