Record ID: DUR-4E6825
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle. Single loop, D-shaped, with a single projecting knop. Strap bar which extends past the frame.
Created on: Wednesday 23rd February 2011
Last updated: Thursday 30th June 2011
Spatial data recorded. This findspot is known as 'Dalton Area', grid reference and parish protected.

Record ID: DUR-4E5A14
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle. Single loop, D-shaped, strap bar is slightly narrowed and offset.
Created on: Wednesday 23rd February 2011
Last updated: Thursday 30th June 2011
Spatial data recorded. This findspot is known as 'Dalton Area', grid reference and parish protected.

Record ID: DUR-4E7273
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle. Single loop, D-shaped, with a single projecting knop. It is broken and missing its strap bar and one side of the frame. Where the strap bar was there is a single small projection, this would have been mirrored on the other arm.
Created on: Wednesday 23rd February 2011
Last updated: Thursday 30th June 2011
Spatial data recorded. This findspot is known as 'Dalton Area', grid reference and parish protected.

Record ID: DUR-F7AF04
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle, Meols Type 10, 13-14th century. It is a single looped D-shaped buckle, with outward angled knops flanking transverse grooves on the thickned outer edge. The bar is narrowed and offset.
Created on: Tuesday 15th March 2011
Last updated: Tuesday 15th March 2011
Spatial data recorded.

Record ID: DUR-20F8C8
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy annular Medieval buckle. The frame is circular in form and D-shaped in section with a pin constriction to one side. This holds in place a copper-alloy pin formed from a sheet folded over the central bar, it narrows slightly towards the end which just touches the outer frame. At the centre of the frame is an integrally cast copper-alloy bar that appears to be cylindrical in form. This holds in place a separately cast copper-alloy buckle plate that is folded around the bar to create an upper and lower plate, the lower plate being smaller than the upper. Both ends o…
Created on: Thursday 17th March 2011
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Catterick Area', grid reference and parish protected.

Record ID: DUR-A48454
Object type: BUCKLE
Broad period: MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation
Copper alloy Medieval buckle and plate, It is mostly complete. Circular in plan with a hook extending out from one side. It has a central strap bar, consisting of a strip wrapped round both sides of the buckle. The pin is attached to the strap bar, again this consists of a strip wrapped around the strap bar. A triangular plate fits onto the plate, and extends into the other half of the buckle from the pin. It has a section cut out where the pin fits and has a circular hole at the apex of the triangle. The plate measures 15.54 x 12.49mm.
Created on: Monday 24th May 2010
Last updated: Tuesday 25th May 2010
Spatial data recorded.

Record ID: DUR-A52E27
Object type: BUCKLE
Broad period: MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation
Cast copper alloy buckle fragment from the Medieval period. Just less than half remains. It would have been D-shaped with a narrowed strap bar. The terminals of the buckle before the strap bar are zoomorphic heads with the strap bar coming out of the animals mouth. The animal is possibly a dog, similar to the style seen on Late Medieval ewer spouts. A similar buckle can be seen on the database recorded as NARC-B9F980
Created on: Monday 24th May 2010
Last updated: Tuesday 25th May 2010
Spatial data recorded.

Record ID: DUR-E5ACE6
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle from c.1250-1400. D-shaped in pla with a single collared knop on the outer edge. The straph bar has a groove where the pin would have sat but this is now missing. There is a casting sprue on either side of the frame at the end near the strap bar.
Created on: Tuesday 8th June 2010
Last updated: Wednesday 21st March 2018
Spatial data recorded.

Record ID: DUR-5A8E43
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval annular buckle pin. The loop has been cast in one with the pin. Just below the loop is a moulded raised section with grooves in. The pin narrows slightly towards the end.
Created on: Tuesday 20th July 2010
Last updated: Tuesday 22nd January 2019
Spatial data recorded.

Record ID: DUR-5BE4D6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Fragment of a Medieval buckle frame. Only the outer edge remains, the thickened outer edge which has 3 linear grooves for decoration.The stumps of the frame remain protruding from the edge.
Created on: Tuesday 20th July 2010
Last updated: Monday 2nd August 2010
Spatial data recorded. This findspot is known as 'Brough Area', grid reference and parish protected.

Record ID: DUR-120CB6
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy disc-on-pin buckle dating to the 13/14th century. The frame is circular and has a circular cross-section. The pin is complete in the form of a disc. It has a hook at one end which is wrapped around the brooch frame, the central part is sub-circular then it has a small pointed extension which touches the other side of the frame. The central part of the pin has 4 circular perforations in a lozenge shape. The left and right one are empty. The upper and lower ones are filled with small studs with rounded tops. There are traces of gilding left on the disc, the entire b…
Created on: Tuesday 10th August 2010
Last updated: Friday 13th May 2016
Spatial data recorded.

Record ID: DUR-4FA5E0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle. A single loop type, it has a narrowed and offset strap bar. The outer edge is widened and has a moulded four-bead edge. The pin is missing.
Created on: Tuesday 31st May 2011
Last updated: Tuesday 31st May 2011
Spatial data recorded.

Record ID: DUR-5067D3
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle with a sheet plate. The buckle is oval in plan with a slightly pointed outer edge which has a groove where the pin would have sat. The pin is still present but does not quite reach the edge of the frame. The plate is formed from a rectangular sheet of metal folded in half over the buckle frame. There is a hole at the frame end where the pin sits. The plate is held together by a circular rivet half way down.
Created on: Tuesday 31st May 2011
Last updated: Tuesday 31st May 2011
Spatial data recorded.

Record ID: DUR-E433F3
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy double loop buckle dating to c.1350-1650. Each loop is oval shaped and the frame is decorated with irregular grooved lines. The strap bar is narrower than the rest of the frame.
Created on: Tuesday 8th December 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DUR-5AD474
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle. It is a single loop buckle with a narrowed strap bar and a thickened outer edge. The outer edge has some decoration in the form of grooved lines. The buckle is bent and the strap bar has cracked in the centre.
Created on: Tuesday 19th January 2010
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Aldbrough', grid reference and parish protected.

Record ID: DUR-5ADAC2
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Fragment of Medieval (1250-1350) copper alloy buckle frame of Meols Type 11, consisting of the outside ‘roller’ edge and a short part of the adjoining frame at either end. The outer edge is really all that remains with the narrow pointed terminals being all that is left of the frame. Egan and Pritchard (1991) illustrate a similar frame, (p. 72-3 ref. 293), and Whitehead (2003) p.9 no.11. A similarly broken buckle has been recorded on the database as WILT-4D30F2.
Created on: Tuesday 19th January 2010
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Aldbrough', grid reference and parish protected.

Record ID: DUR-A7A225
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy single loop buckle, Meols Type 6 dating from the late 13th century through to the early 14th. It has a thickened outside edge which has outward facing side knops and a central groove. The strap bar is narrowed and offset. The pin is formed by a strip of copper alloy folded over the bar.
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DUR-A7B123
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy buckle and plate. Meols type 7, 13th-14th centuries in date. It is a single oval shaped buckle with a narrowed offset strap bar. The plate is sub-rectangular, narrowing slightly towards the end away from the buckle. It is made from a folded over sheet which is smaller and narrower on the reverse. There are three circular rivets holding it in place, running the length of the plate. The pin fits into a slot at the top of the plate and is formed by a straip of copper alloy folded over the bar. The pin is incomplete. The surface of the buckle has been gilded.
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DUR-A7BF01
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy lozenge shaped annular Medieval buckle or brooch. The frame is angled upwards towards the centre. It has a large lozenge shaped hole in the centre across which the pin lies diagonally. It is formed by a strip of copper alloy folded through a hole in one corner of the brooch. The upper surface of the brooch is decorated by a band of incised lines around the whole of the brooch. The brooch has been silvered or tinned on the surface.
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DUR-A7D413
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval buckle. Meols type 10, dating to the late 14th century. It is single looped with a narrowed and offset strap bar. The outer edge is ribbed and has projecting outer knops. The pin appears complete and is formed by a strip of copper alloy folded over the strap bar.
Created on: Tuesday 16th February 2010
Last updated: Thursday 24th February 2011
Spatial data recorded.