Record ID: DUR-F3E156
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman penannular brooch, a Fowler Type A3, dating to c.100- 350 AD. The brooch itself is complete, although the pin is broken. The brooch has been squashed out of shape, probably whilst in the ground. It has golbular terminals, each with a single moulded collar. One of the terminals appears to have an extra bit of metal, it could be a mis-cast which was not cleaned up. The pin was formed by a strip of wire folded over the brooch, the loop remains but it has broken before it extends to the pin. Mackreth (2011) Brooches in Late Iron Age and Roman Britain : vo…
Created on: Monday 20th June 2011
Last updated: Wednesday 4th March 2020
Spatial data recorded.

Record ID: DUR-F96582
Object type: BROOCH
Broad period: ROMAN
County: County Durham
Workflow stage: Awaiting validation
Copper alloy head of a Roman trumpet brooch, dating to c. 75- 175 AD. It is a large, and slightly unusual variety and unfortunately is quite corroded. It is a sprung type, with huge coils, four complete and two which are broken. The wire then threads through the coils. The central broken coil would have extended to the pin but that is now gone. The wire also runs below the spring, connected to both ends. The head almost immediately narrows away from the spring, which extends above the head. It is sub-traingular in plan, the broken end showing the bow would have had a circular cros…
Created on: Wednesday 8th June 2011
Last updated: Wednesday 8th June 2011
Spatial data recorded.

Record ID: DUR-504A46
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Fragment of a cast copper alloy Roman brooch, dating from the 1st- 3rd centuries AD. It is the lower section of the bow, with the remains of the catchplate on the reverse. The bow consists of two biconical bead shapes, before tapering towards the foot.
Created on: Tuesday 31st May 2011
Last updated: Wednesday 1st June 2011
Spatial data recorded.

Record ID: DUR-4FFF36
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy headstud brooch, dating to c. 75- 175 AD. It is mostly complete, with just the pin missing. The headloop was cast integrally with the brooch, and is complete, but bent. It sits straight onto the head, which has two square wings with three vertical grooves on each side. On the back of the head is a semi-circular casing which held the axis bar. The headstud is a raised circular boss with a raised cross on it. The bow is semi-circular in cross section with a raised ridge running down the centre to the foot. The foot consists of a forward facing rounded moulding. The…
Created on: Tuesday 31st May 2011
Last updated: Tuesday 31st May 2011
Spatial data recorded.

Record ID: DUR-4FE271
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Fragment of a copper alloy Roman headstud brooch, dating to c. 75- 175 AD. Only the top of the bow and part of the head remains. The headloop has broken off, leaving just the base which is set on two steps, the upper one being decorated with a line of vertical grooved lines. The wings would have been square, possibly with steps, decorated with short horizontal lines, but again they are incomplete, leaving just one line on each wing visible. The bow is rectangular in section, narrowing towards the foot, but it has broken just below the headstud. The headstud is a raised circular b…
Created on: Tuesday 31st May 2011
Last updated: Tuesday 31st May 2011
Spatial data recorded.

Record ID: DUR-112837
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy and enamel Roman plate brooch, a skeumorphic type in the form of a sandal, dating to the 2nd century AD. It is mostly complete with just the pin and most of the enamel decoration missing. The brooch is flat and in plan is pointed at one end, has a narrow waist in the middle and is rounded at the other end. There is a loop at the rounded end. On the reverse of the brooch is a double pin lug at the rounded end, with the hinge part of a copper alloy pin surviving between them; and a damaged catchplate at the pointed end. The enamel is mostly missing but from what re…
Created on: Wednesday 4th May 2011
Last updated: Wednesday 4th May 2011
Spatial data recorded.

Record ID: DUR-1CCE46
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman trumpet brooch, dating to c. 75- 175 AD. It is incomplete, having broken before the foot, and with the pin missing. The brooch was a sprung example, the loop on the reverse of the head would have held the axis bar on which the spring would have been. The head is the usual rounded trumpet shape. The bow has a circular cross section, widening at the waist for the moulding, a devolved acanthus. On the reverse of the bow at the waist, the start of the catchplate can be seen. The bow narrows again after the waist and is broken before the foot. The surface of t…
Created on: Tuesday 29th March 2011
Last updated: Tuesday 29th March 2011
Spatial data recorded.

Record ID: DUR-8A4741
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy trumpet brooch, c.75-175 AD. It is worn all over and incomplete. The headloop is broken, as is the pin (it was a hinged type). The head is the usual trumpet shape although it is quite thin. The bow has a circular cross section and widens towards the moulding at the waist, the moulding is a large raised curved ridge, with a smaller line above and below. The bow below the waist begins to narrow towards the foot but has broken before it reaches it.
Created on: Tuesday 22nd March 2011
Last updated: Friday 25th March 2011
Spatial data recorded.

Record ID: DUR-217460
Object type: BROOCH
Broad period: ROMAN
County: County Durham
Workflow stage: Awaiting validation
An incomplete copper alloy dragonesque brooch, dating to the early Roman period (c.AD50-200) The object comprises an incomplete curvilinear plate in an S-shape, with squared bar terminals (one of which is missing). Across the wider body section are two further bars with an inscription between, of which "...N OR..." can be read. The reverse of the object is undecorated. Dimension: Length 29.89mm; Width 23.88mm; Thickness 4.94mm; Weight 7.8gm. The brooch conforms to the type desinated by Hunter (2010) as as Type C3, S-shaped brooch with bar terminals, and by Mackreth (2…
Created on: Thursday 17th March 2011
Last updated: Friday 13th November 2020
No spatial data available.

Record ID: DUR-216BF5
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy brooch of the dragonesque type, dating from the Roman period (c.AD50-200). The central body section of the brooch survives only, enamelled and decorated with a central circle containing two annulets, with'trumpets' splaying out from each outer edge of the circle. Both the heads/tails are missing. Length: 39.54 mm; Width: 19.98 mm; Thickness: 2.61 mm; Weight: 8.7 g Dragonesque brooches are generally regarded as a hybrid art form, reflecting newer Roman influences of the 1st and 2nd centuries, but firmly rooted in the artistic traditions of…
Created on: Thursday 17th March 2011
Last updated: Tuesday 8th September 2020
Spatial data recorded. This findspot is known as 'Catterick Area', grid reference and parish protected.

Record ID: DUR-F77784
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy and enamel Roman plate brooch, c.150-300 AD. It is circular in plan with slightly broken edges. On the front face is a triskele motif in relief with the field around filled in with blue enamel. The reverse is plain and flat with the remnants of the catchplate and pin mechanism. The pin is missing. Mackreth (2011) Brooches in Late Iron Age and Roman Britain : vol 1, p 156, plate 105, no. 10688.
Created on: Tuesday 15th March 2011
Last updated: Wednesday 4th March 2020
Spatial data recorded.

Record ID: DUR-651997
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy part of a Roman bow brooch, 2nd century in date. It is incomplete, with the bow having broken before the foot, the headloop mostly missing and the pin broken. It is a hinged example and the top of the pin still remains, hinged on the axis bar enclosed inside the wings.
Created on: Tuesday 8th March 2011
Last updated: Thursday 30th June 2011
Spatial data recorded.

Record ID: DUR-4E0446
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman bow brooch, it appears to be a variant of a T-shaped and headstud type, dating to the late 1st century- 2nd century. It is mostly complete. The headloop is slightly broken, it has been cast integrally to the head. The wings are square-ended with two raised vertical lines on each as decoration. The bow has three vertical ridges on the top, which run together and become two by the foot. The It is a hinged type with the axis bar being held within close wings. The pin is missing just the end point, measuring 26.82mm in length.
Created on: Wednesday 23rd February 2011
Last updated: Friday 25th February 2011
Spatial data recorded. This findspot is known as 'Dalton Area', grid reference and parish protected.

Record ID: DUR-A910D2
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy Roman disc brooch, 2nd- 3rd century in date. It is circular in plan with decoration in relief on the front. The fields would have been infilled with enamel originally but this has all been lost. The design consists of a 6 pointed star, each point has an anulet at the end, the arms are curved. In the centre is a pellet. There is a raised border around the edge of the brooch. The reverse is plain and flat with the remnants of the pin mechanism and catchplate. The pin is missing.
Created on: Thursday 3rd February 2011
Last updated: Thursday 3rd February 2011
Spatial data recorded. This findspot is known as 'Catterick', grid reference and parish protected.

Record ID: DUR-184206
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman disc brooch, 2-3rd century AD. It is circular in plan with decoration in relief on the front. The decoration consists of a central cross, with rounded arms, inside two concentric circles. The cross was infilled with blue enamel, some of which remains. Outside the circles is a circle of dots and then a raised border meets the edge of the brooch. It is likely some of these fields would also have been filled with enamel but this is now missing. The reverse is plain and has the remnants of the catchplate and pin mechanism. The pin and its mechanism…
Created on: Thursday 27th January 2011
Last updated: Wednesday 2nd February 2011
Spatial data recorded.

Record ID: DUR-D6C512
Object type: BROOCH
Broad period: ROMAN
County: County Durham
Workflow stage: Awaiting validation
Cast copper alloy fragment of a Roman bow brooch, late 1st- 2nd century AD in date. Only the foot and lower part of the bow remains. There are remnants of the catchplate on the reverse. The bow tapers to a point towards the foot, there does not seem to be a widening for the foot. It is very worn and corroded all over, with a light green patina.
Created on: Monday 24th January 2011
Last updated: Monday 24th January 2011
Spatial data recorded.

Record ID: DUR-B0C550
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy Roman headstud brooch dating to c. 75- 200 AD. It is almost complete with just a small part of the catchplate missing. The headloop is cast integrally to the brooch, the wings are square ended and have vertical grooves as decoration, either side of the head. The headstud is cast integrally to the bow, it is a raised circle with a small central raised dot. The bow is sub-recatngular in cross section with rounded edges. All the way down the bow are lozenge shapes which would have been inlaid with enamel. On each side of these the triangles would also have be…
Created on: Monday 10th January 2011
Last updated: Friday 28th January 2011
Spatial data recorded.

Record ID: DUR-B076E7
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy Roman trumpet brooch dating to c.75-175 AD. It is bent almost in half, the headloop, catchplate and pin are missing. It is corroded and worn. Width of head 12.20mm
Created on: Monday 10th January 2011
Last updated: Friday 28th January 2011
Spatial data recorded.

Record ID: DUR-B06BD4
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy and enamel Roman trumpet brooch dating to c.75-175 AD. The base of the bow is missing (along the with catchplate and foot) but other than that it is complete. It is a hinged example, the pin is still intact but it is bent. The headloop is formed by wire, which comes from the axis bar up over the head and is held in place by a plain strip of copper alloy wrapped around the base. The head is 15.88mm wide, the usual trumpet shape and is decorated with panels inlaid with red and blue enamel. In the centre is a raised strip running down the bow to the waist. O…
Created on: Monday 10th January 2011
Last updated: Friday 28th January 2011
Spatial data recorded.

Record ID: DUR-ADD0F0
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy trumpet brooch, c. 75-175 AD. Complete except for the headloop and a small part of the catchplate.The head has a grooved line around the edge as decoration. Its width is 14.77mm. This is a spring mechanism, with 6 coils, still present, the pin appears complete and narrows to a point. The wire loops under the coils and also acts as the axis bar around which the coils are wrapped. The wire is broken at the top where it would have formed the headloop. There is also a cast strip coming from the base to hold the spring in place. The head narrows to the bo…
Created on: Monday 10th January 2011
Last updated: Friday 28th January 2011
Spatial data recorded.