• 

  Image not taken

Record ID: SF-E291A2
Object type: COIN
Broad period: MEDIEVAL
Workflow stage: Awaiting validation
A silver penny of Edward II or III, 1310-1343 AD
Created on: Monday 12th March 2012
Last updated: Monday 12th March 2012
No spatial data available.

Record ID: SF-E08B43
Object type: BROOCH
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval annular brooch fragment. It consists of about half of the brooch, with an ornate hoop and four collets evenly spaced. The hoop has a flat back, and the upper surface is decorated with panels between the collets having four perforations arranged in a square. At the centre of each panel, on the outside edge, there is a rounded knop flanked by two short bars, the effect of which produces a frilled edge. The four collets are set at an angle of sixty degrees, and lean outwards. Their edges are faceted but each has a circular cell, and though no stone or glass remain…
Created on: Monday 12th March 2012
Last updated: Monday 19th March 2012
Spatial data recorded. This findspot is known as 'Rattlesden', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-DEAD94
Object type: AMPULLA
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A lead medieval ampulla fragment. It consists of the lower pouch-shaped part of the ampulla, with the upper part missing due to old breaks. There is moulded decoration on both sides, with a scallop shell occupying the entire field on one side, and a crown over W on the other. This indicates an association with the site of Walsingham. The ampulla fragment measures 27.7mm in surviving length, 26.19m in width and 4.37mm in thickness. It weighs 17.65g. Ampullae of this type date to the fifteenth century, and are thought to have contained 'Holy Water'. Mitchiner suggests that the reason…
Created on: Monday 12th March 2012
Last updated: Monday 12th March 2012
Spatial data recorded. This findspot is known as 'Rattlesden', grid reference and parish protected.

Record ID: SF-6216E2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval buckle frame. It is oval and resembles a Meols type 2 shape. The frame is thickened to top and bottom of the bar, which is narrow and circular in section. The outside edge is expanded and drawn outwards at its centre, thus creating two small, decorative peaks. there are traces of gilding on the outer surface of the frame. The buckle measures 13.55mm in length, 19.75mm in width and weighs 2.08g.
Created on: Tuesday 6th March 2012
Last updated: Tuesday 6th March 2012
Spatial data recorded. This findspot is known as 'Rattlesden', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-5FD924
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval bar-mount. It is incomplete due to old breaks, and consists of a central lobe, with parts of the circular rivet protrusions to top and bottom. The mount is domed and the central lobe is decorated with fine cross-hatching. The mount measures 13.79mm in surviving length and 9mm in width at its maximum. It weighs 1.16g. An example from Medieval London is illustrated in Egan & Pritchard 1991, no.1161, fig.134.
Created on: Tuesday 6th March 2012
Last updated: Tuesday 6th March 2012
Spatial data recorded. This findspot is known as 'Rattlesden', grid reference and parish protected.

Record ID: SF-5F4C46
Object type: THIMBLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Late medieval or Post-medieval thimble. It is a semi-circular 'beehive' shape, with a pair of grooves defining a band around its rim. The pits appear to have been made in vertical rows running up the sides and over the top to the centre of the dome of the thimble. It measures 17.57mm in diameter, 12.84mm in height and weighs 2.36g.
Created on: Tuesday 6th March 2012
Last updated: Tuesday 6th March 2012
Spatial data recorded. This findspot is known as 'Rattlesden', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-D057A8
Object type: THIMBLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Late Medieval or later sewing ring fragment. It has four transverse bands of pitting, the pits being circular. There is a plain, narrow band to top and bottom of the ring. It measures 11.17mm in height, and 21.98mm in length and 1.34mm in thickness. It is not possible to assess its diameter, as the object is now out of shape.
Created on: Tuesday 28th February 2012
Last updated: Monday 5th March 2012
Spatial data recorded. This findspot is known as 'Nacton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-3CAFC3
Object type: THIMBLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Late Medieval thimble. It has been knocked out of shape and is now oval with straight sides and a lightly domed top. The surface is worn and the pitting appears to start in places at the rim, which has a short notch. The pitting, with circular holes, continues over the entire surface of the thimble. It measures 20.71mm in height, and the distorted opening measures 23.23mm x 16.14mm. The thimble weighs 5.94g. 1400-1500
Created on: Tuesday 21st February 2012
Last updated: Tuesday 28th February 2012
Spatial data recorded. This findspot is known as 'Bacton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-3B02A3
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A silver short cross penny of John, 1200-1204, class 4b
Created on: Tuesday 21st February 2012
Last updated: Tuesday 28th February 2012
Spatial data recorded. This findspot is known as 'Wetheringsett', grid reference and parish protected.

Record ID: SF-3ADD50
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper alloy Medieval harness pendant. It is a shield-shaped pendant with a suspension loop at the top, turned at ninety degrees. There is a device of a lion rampant occupying the whole field, with red enamel surrounding it. The pendant measures 40.93mm in length, 23.8mm in width, 3.47mm in thickness and weighs 13.36g. An example with a similar device and disposition of the tail, is illustrated from Norfolk in Ashley 2002, no.75.
Created on: Tuesday 21st February 2012
Last updated: Tuesday 28th February 2012
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-39FC05
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A silver short cross cut halfpenny of John, 1205-07, class 5b, probably moneyer Beneit of London.
Created on: Tuesday 21st February 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded. This findspot is known as 'Wetheringsett', grid reference and parish protected.

Record ID: SF-A8D366
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A medieval or early post-medieval copper alloy terminal possibly from a strap end, spoon handle, balance arm or similar small article. The terminal could be seen as representing a small standing human figure, the object being broken off at the foot due to old breaks. The terminal measures 22.39mm in length, 5.72mm in width and weighs 1.69g.
Created on: Tuesday 14th February 2012
Last updated: Friday 15th September 2017
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A7D767
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval or Post- Medieval vessel fragment. It is a small piece of cauldron or skillet, having a flat surface on the inside, and raised rib on the outside. The rib is hemispherical, and the surface of the metall is heavily corroded. The fragment measures 31.02mm x 26.32mm an weighs 17.71g.
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A7BDC5
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Post- Medieval mount or possible buckle plate. It is incomplete due to old breaks, and has been made from sheet metal. The central area is circular and has a rivet hole at its centre. There are two narrow arms protruding from one side, apparently incomplete, suggesting that the object was folded back at this point, to create a pin-slot or gap for suspension, as with a buckle plate. A rectangular extension on the opposite side terminates with two small triangular projections, with space for a third (now missing due to old breaks). There is a small rivet hole near the c…
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A76C84
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Post- Medieval buckle frame. It is incomplete and has been bent out of shape probably as the result of plough damage. The frame may originaly have been oval, with a faceted outside edge, and expanded knops at either terminal. The bar for the pin attachment is missing. The distorted object measures 42.94mm in length, 12.67mm in width and weighs 5.79g.
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A65CD7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval buckle frame or possible harness ring. It is an annular frame with faceted edges and there are patches of wear diametrically opposed which may be attachment scars for a pin. The frame appears to be deliberately angled, and measures 25.84mm in external diameter, and 3.55mm in average width. It weighs 2.09g.
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A612F7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval buckle frame. It has a similar shape to Meols type 2, a simple oval frame, with an angled outside edge. The bar is narrowed and offset with knops to top and bottom. A fragmne to the pin loop still articulates around the bar, though the pin itself is missing due to old breaks. The frame measures 13.30mm in length, 20.95mm in width and weighs 2.97g.
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Bacton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A51DF6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval buckle plate fragment. Parts of it are missing due to old breaks. It is a rectangular plate made from folded sheet metal, and has broken off across the fold where there is also a rectangular pin slot. At the opposite terminal there is a single perforation for a rivet, centrally placed and close to the edge. The plate measures 25.98mm in length, 10.81mm in width and weighs 0.96g.
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-A4F037
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A sheet copper alloy Medieval or later mount. It is an elongated oval shape and slightly domed, with sharp points protruding fom the narow terminals. There is a single rivet hole placed off-centre in the body of the mount. it measures 25.8mm in length, 10.3mm in width and weighs 0.8g.
Created on: Tuesday 14th February 2012
Last updated: Tuesday 14th February 2012
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.

Record ID: SF-A45282
Object type: COIN WEIGHT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper alloy Medieval or Post-Medieval coin weight. It is a round flan and uniface, with the design of three lis in a shield with crown over. The flan is 11.21mm in diameter, 2.04mm in thickness and weighs 1.46g. This is most likely a weight for the English or French half ecu, which was issued from the reign of Charles VII, 1422-61, to Louis XI, 1436-75AD. The ecu was current in England in 1525, for four shillings. It is not possible to say whether this is a French or English coin weight. ( Withers 1995, Lions, Ships and Angels, p39).
Created on: Tuesday 14th February 2012
Last updated: Monday 10th April 2017
Spatial data recorded. This findspot is known as 'Brockley', grid reference and parish protected.