Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security):001421F36B8019CA
    • Show this many records per page:40

  • Image not taken

Record ID: PAS-755C62
Object type: FINGER RING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Medieval finger ring, of stirrup shape. The hoop is slightly distorted and abraded along its edges. The ring is set with a roughly rectangular stone, which is held in place by two claws. The ring is gold, and dates from the 13th century. The stone is blue, and is a sapphire. Surface analysis indicated gold and silver contents of approximately 73–76% and 16–18% respectively, and confirmed the gemstone Dimensions: length 25 mm, width 20 mm It has been published in the Treasure Annual Report 2005/6 (p. 115, no. 403)
Created on: Saturday 10th February 2024
Last updated: Saturday 10th February 2024
Spatial data recorded.


  • Image not taken

Record ID: PAS-7555B5
Object type: FINGER RING
Broad period: MEDIEVAL
County: Essex
Workflow stage: Awaiting validation Find awaiting validation
A medieval finger ring of iconographic type.  The bezel is hexagonal and contains a depiction of God the Father holding the figure of Christ on the Cross.  This was the conventional way to portray the Trinity in the late medieval period, though the dove representing the Holy Spirit seems to be absent. The hoop of the ring is twisted.  The twists closest to the bezel are engraved with seven five-petalled flowers and a lupin (?).  The five-petalled flower is a recognised reference to the five wounds of Christ and the number seven may be an allusion to the seven sorro…
Created on: Saturday 10th February 2024
Last updated: Saturday 10th February 2024
Spatial data recorded. This findspot is known as 'North of Colchester', grid reference and parish protected.


  • Image not taken

Record ID: PAS-751353
Object type: FINGER RING
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval finger-ring in three fragments, formed of a flat hoop terminating in two clasped hands with scalloped cuffs. The ring carried a rudimentary engraving, which consists of an inscription punctuated by simple stars, circles and foliate motifs. The inscription reads: 'de don co . . '. The inscription is either a corruption of the popular medieval sentiment 'de bon coer' ('of/from good heart') or it signifies the gift of/from a heart (using the noun 'don' meaning 'gift'). The finger-ring is silver-gilt, and dates from the la…
Created on: Saturday 10th February 2024
Last updated: Saturday 10th February 2024
Spatial data recorded.


  • Thumbnail image of DEV-A4F24E

Record ID: DEV-A4F24E
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy fob seal with surviving intaglio, dating to the post medieval period, c. AD 1700-1850. There is a cylindrical loop at the top of the object for attaching the fob to a chain. The loop is decorated with grooves creating a ribbed effect. The fob frame is formed of two mirrored sides, each forming an omega shape. The sides are fused at the top (below the attachment loop) but part as they reach the die frame, resulting in four feet. There is a convex protrusion below the attachment loop but from here the curvilinear arms taper …
Created on: Thursday 27th April 2023
Last updated: Thursday 15th June 2023
Spatial data recorded.


  • Thumbnail image of DEV-90A272

Record ID: DEV-90A272
Object type: COIN
Broad period: ROMAN
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman sestertius of Marcus Aurelius (AD 161-180), dating to the period AD 170-171 (Reece period 8). Reverse type PRIMI/ DECEN/NALES/ COS III/ S C in wreath. Mint of Rome. See RIC III, p. 293
Created on: Wednesday 26th April 2023
Last updated: Wednesday 26th April 2023
Spatial data recorded.


  • Thumbnail image of DEV-D5A24D

Record ID: DEV-D5A24D
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
A clipped Roman silver siliqua of Valens dating from the period AD 367-375 (Reece period 19). VRBS ROMA reverse depicting Roma seated left on throne holding sceptre and Victory on globe. Mint of Trier. See Hoxne no. 257. RIC Vol. IX, no. 27e/45b Measurements: 15 mm in diameter, 1.61 g in weight 
Created on: Wednesday 5th April 2023
Last updated: Thursday 20th April 2023
Spatial data recorded.


  • Thumbnail image of DEV-755FE2

Record ID: DEV-755FE2
Object type: UNIDENTIFIED OBJECT
Broad period: EARLY MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A small, incomplete openwork copper-alloy object of uncertain function and possible late early-medieval date (c. 9th-11th century). It is formed of a broadly flat, openwork plate with curvilinear sides, broken at one, possibly both, short ends. The widest point of the plate is around halfway along it. The object may terminate in a devolved animal head, seemingly plain, but slightly corroded. The plate is formed of conjoined cells of elongated scrolled C shape which joined to form a central arcuate cross. Two larger such cells abut back-to-back at the terminal, above which two sma…
Created on: Friday 31st March 2023
Last updated: Wednesday 17th April 2024
Spatial data recorded. This findspot is known as 'Barnstaple area', grid reference and parish protected.


  • Thumbnail image of DEV-55BD90

Record ID: DEV-55BD90
Object type: JETTON
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An almost complete medieval copper-alloy French jetton of the 'shield of France modern' type, dating to c. 1385-1488. The quatrefoil border around the obverse shield is difficult to parallel; the jetton has thus been marked as noteworthy. Measurements: 25.5 mm diameter, weight 2.46 g This jetton has suffered some minor losses to its circumference.
Created on: Thursday 30th March 2023
Last updated: Tuesday 4th April 2023
Spatial data recorded.


  • Thumbnail image of DEV-1A00A1

Record ID: DEV-1A00A1
Object type: BROOCH
Broad period: ROMAN
County: Devon
Workflow stage: Published Find published
A fragmentary copper-alloy Roman initial T-shaped brooch dating to AD 50-150, now just comprising the upper bow and head, the latter now broken.  One of the wings is seemingly intact, while the other is broken at its junction with the bow. On the reverse, the broken wing is also abraded revealing the channel for the axis bar; the pin, of course, is missing. The extant wing is broadly circular, though squared off at the top. Retained within it are the remains of a probably iron bar, as suggested by traces of iron corrosion product in a longitudinal groove …
Created on: Monday 27th March 2023
Last updated: Thursday 2nd November 2023
Spatial data recorded. This findspot is known as 'Barnstaple area', grid reference and parish protected.


  • Thumbnail image of DEV-08685B

Record ID: DEV-08685B
Object type: COIN
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver penny of Edward I (1272-1307). Class 10cf3a (North 1042) dating to 1307-1309. Mint of London. North (1991, 32). Measurements: 1.4 g in weight
Created on: Tuesday 14th March 2023
Last updated: Monday 20th March 2023
Spatial data recorded.


  • Thumbnail image of DEV-9ED279

Record ID: DEV-9ED279
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver mount of post-medieval date (c. 18th century). As well as having received numerous circumferential losses the edge has also been bent at one point. It was originally stud like, consisting of a broadly circular, flat head attached to a separate stem for attachment, the latter possibly of base metal. A rectangular scar from the stem is visible at the centre of the reverse. On similar mounts the circumference is clearly scalloped; this disc is either rather worn or was originally smooth. There are small punch marks in the spandrels between each lob…
Created on: Thursday 9th March 2023
Last updated: Wednesday 22nd March 2023
Spatial data recorded.


  • Thumbnail image of DEV-8943AB

Record ID: DEV-8943AB
Object type: COIN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A very worn and bent post-medieval silver shilling of Elizabeth I (AD 1558-1603). Third issue, bell initial mark, dating to AD 1582-1583. Mint of London. North (1991, 136) no. 2014. Measurements: diameter 28.74 mm, weight 4.46 g This coin has an incised six-pointed star mark off centre on the obverse, plus what appear to be several punch marks on the reverse.
Created on: Wednesday 8th March 2023
Last updated: Thursday 15th June 2023
Spatial data recorded.


  • Thumbnail image of DEV-876CEE

Record ID: DEV-876CEE
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-medieval cast copper-alloy openwork dress clasp, broken at the diagnostic end but an eye piece, based on similar examples (c. 17th century). The dress fastener comprises a circular moulded openwork plate with seven pellets at the centre, forming a sexfoil flower. This is surrounded by a band of eight circular perforations, three of which have worn through. This is in turn surrounded by a moulded border of alternating pellets and transverse bands. There are three rounded attachment knops positioned around the circumference. A rectangular hook projects from …
Created on: Wednesday 8th March 2023
Last updated: Thursday 15th June 2023
Spatial data recorded.


  • Thumbnail image of DEV-5F7A18

Record ID: DEV-5F7A18
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy double-looped buckle probably of post-medieval date. The buckle was formed of a pair of oval loops; one has been lost to an old break at the junction of frame and pin bar. The extant loop has an effectively flat reverse, with possible central concavity from the casting process. The front is bevelled both externally and internally, the latter more steeply. There are hints of very small protrusions at each end of the pin bar. A thick sheet copper-alloy pin is still attached.  Measurements: 15 mm in length, 22 mm in width and 2.35 …
Created on: Monday 6th March 2023
Last updated: Thursday 18th May 2023
Spatial data recorded.


  • Thumbnail image of DEV-5D250A

Record ID: DEV-5D250A
Object type: THIMBLE
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A slightly squashed, but complete late medieval copper-alloy thimble (c. 15th century). The thimble is of cast, one-piece construction, with sides that taper slightly to a domed top. From a central tonsure on the dome, circular pits spiral out, covering the dome's perimeter and all of the sides above a basal plain band, itself delineated by an engraved circumferential groove. Measurements: 22 mm (max.) diameter, 21 mm height, 0.5 mm thick, weight 11.39 g For similar thimbles see Read (2018, 25-28) attributed to the 15th century.
Created on: Monday 6th March 2023
Last updated: Monday 6th March 2023
Spatial data recorded.


  • Thumbnail image of DEV-7AD80A

Record ID: DEV-7AD80A
Object type: COIN
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A clipped medieval silver penny of Edward IV (AD 1461-1470; 1471-1483). First reign, light coinage, type VI, VII or VIII, dating to 1465-1468. Mint uncertain, either London or Durham. North (1991, 88-89) Measurements: diameter 13 mm, weight 0.49 g The clipping extends to the inner circle in places, and almost entirely on the reverse.
Created on: Thursday 23rd February 2023
Last updated: Thursday 9th March 2023
Spatial data recorded.


  • Thumbnail image of DEV-3B950F

Record ID: DEV-3B950F
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A corroded copper-alloy axehead fragment: probably the terminal of a Middle Bronze Age palstave (c. 1500-1100 BC). The cutting edge is shallowly rounded and somewhat abraded. The sides only barely perceptibly flare to this edge. The break, a shallow diagonal, appears old; the solid cross-section revealed suggests that this was a palstave. Such an identification is reinforced by the presence of a central casting seam visible on the side. No decoration appears to survive on the fragment, though the patina is pitted in a few places. Measurements: weight 48.87 g
Created on: Monday 20th February 2023
Last updated: Monday 20th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-FB3364

Record ID: DEV-FB3364
Object type: COIN
Broad period: ROMAN
County: Devon
Workflow stage: Published Find published
A silver Roman denarius of Claudius I (AD 41-54), dating to the period AD 41-54 and possibly an issue of AD 51-52 (Reece period 2). PACI AVGVSTAE reverse type depicting Pax-Nemesis advancing right holding caduceus over snake. Mint of Rome. cf. RIC I (2nd ed.), p. 124, no. 62 for the possible type. Measurements: diameter 18.5 mm, weight 3 g
Created on: Friday 17th February 2023
Last updated: Monday 20th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-D090E5

Record ID: DEV-D090E5
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman cast copper-alloy brooch of unusual form (c. 1st to 3rd century). It consists of a long, thin trapezoidal plate connected by an angled section to the head, probably for a hinged pin. It is unclear to what extent the head survives; the brooch is broken at the start of a section that is expanded slightly from that from which it extends. It may have developed into a tubular head to retain an axis bar for a hinged pin; there are hints of a central pin slot. As noted, a small angled section connects this to the plate; it is set at an angle of just over 45 degrees.&n…
Created on: Wednesday 15th February 2023
Last updated: Wednesday 22nd March 2023
Spatial data recorded.


  • Thumbnail image of DEV-CFDA38

Record ID: DEV-CFDA38
Object type: STIRRUP
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete late early-medieval to medieval copper-alloy stirrup-strap mount best classified as being of Williams Class A, Type 11A, and dating to c. AD 1050-1125. It would have consisted of a sub-triangular plate, but the upper part of the plate is now missing following an old break, as is the apex loop. From the base of of the plate a rectangular angled flange projects backwards, at an oblique angle. The flange is also recessed on each side, that is, it does not attain the full width of the base of the plate. The flange is perforated twice; the corroded remains …
Created on: Wednesday 15th February 2023
Last updated: Monday 20th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-A5B082

Record ID: DEV-A5B082
Object type: JETTON
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A very worn nd corroded copper-alloy post-medieval Nuremberg jetton of anonymous issuer of the Lion of St Mark type dating to c. AD 1500-1570. It has been perforated five times, possibly for reuse. Four holes are fairly equally spaced around the perimeter, made through the reverse, forming a broadly square pattern. A smaller hole has also been made through the obverse at its centre. Measurements: diameter 26 mm, weight 3.59 g
Created on: Monday 13th February 2023
Last updated: Monday 13th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-4D0E0D

Record ID: DEV-4D0E0D
Object type: JETTON
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval late Tournai copper-alloy jetton of Shield of France modern type. Ave Maria reverse legend, dating to c. AD 1415-1497. See Mitchiner (1988, 226-228), no. 683 in particular (p. 227). Measurements: diameter 26.5 mm, weight 4.75 g  This jetton has received some losses to its circumference, particularly on one side off its flan.
Created on: Thursday 9th February 2023
Last updated: Thursday 9th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-4C96A4

Record ID: DEV-4C96A4
Object type: HARNESS FITTING
Broad period: ROMAN
County: Essex
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper-alloy strap-mounted and skirted terret ring. Only the base of the main ring now survives, with slightly more surviving one side of the skirt. It is broadly of D-shaped cross-section, with flat interior with rounded corners. It is moulded externally into a series of segments of differing sizes; not enough of the ring survives to discern a pattern. Below the main ring is a waist below which the hollow skirt expands. The skirt was apparently formed of two 'leaves', one now highly abraded. The other main part of the skirt is sub triangular. Set below, the…
Created on: Thursday 9th February 2023
Last updated: Wednesday 15th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-3834BE

Record ID: DEV-3834BE
Object type: COIN
Broad period: ROMAN
County: Devon
Workflow stage: Published Find published
A slightly abraded copper-alloy Roman sestertius of Diva Faustina II (AD 147-175), dating to the period c. AD 176-180 (Reece period 8). AETERNITAS, S C reverse type depicting Aeternitas standing left holding phoenix on globe and leaning on column. Mint of Rome. RIC III no. 1693 Measurements: 19 g in weight
Created on: Wednesday 8th February 2023
Last updated: Monday 20th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-12DEE1

Record ID: DEV-12DEE1
Object type: LATCH
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy door or window latch in the form of a long-beaked bird's head (c. 17th-18th century). The object has a curved beak section divided from a rectangular plate by a moulded collar. The head is decorated with an incised oval eye, and a curved line down the centre of the beak. The reverse is plain and undecorated. The latch is a medium green colour. Measurements: 60 mm (current) length, 48 mm wide, 4 mm thick and weighs 33.47 g The object is similar to NMS-100CA3, SWYOR-FC4FF7, HAMP-477952 and KENT-ACF377 on this database. Another similar exa…
Created on: Monday 6th February 2023
Last updated: Monday 21st August 2023
Spatial data recorded.


  • Thumbnail image of DEV-114689

Record ID: DEV-114689
Object type: SPOON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early post-medieval lead-alloy spoon (c. 16th century, probably later 16th). The spoon has a pointed oval shaped bowl and a hexagonal stem; the stem terminates in a 'seal top' knop. It is now damaged, and bent, with repairs by the finder, including a sleeve that holds together the broken stem, and glue reattaching two parts of the bowl that had become separated. In addition, the bowl has been bent and has suffered losses. No marks are apparent in the bowl, or on the stem. On the reverse, at the junction of bowl and stem, is a 'rat tail'. The faceted s…
Created on: Monday 6th February 2023
Last updated: Monday 6th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-10E72D

Record ID: DEV-10E72D
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Iron Age La Tène III type/ Nauheim derivative brooch dating to the period c. AD 10-100 (Plouviez period E). While much of the brooch survives, the integral pin is missing, as is the catch-plate. At the top of the bow is the head of the brooch. The head was probably made of four coils of circular cross-section, two either side of the bow, but the internal coil that would have developed into the bow has been lost to an old break. The coils on the other side of the bow may have been squashed flat. When viewed head uppermost, the first coil to the left of the pin and …
Created on: Monday 6th February 2023
Last updated: Monday 6th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-0FCE12

Record ID: DEV-0FCE12
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy uniface trade weight dating to the post-medieval period (early-mid 19th century). The object is circular with a recessed upper surface within a prominently raised lip/rim. The reverse also has a small recessed area at its centre around a centring pit. Incised concentric circles around this presumably result from the turning process. The upper surface also has a central pit within a slightly raised border. This is surrounded by a pair of engraved concentric circles, with a further trio of circles between the last and the bevelling from the lip/rim. The lip/rim is it…
Created on: Monday 6th February 2023
Last updated: Thursday 9th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-D8B951

Record ID: DEV-D8B951
Object type: COIN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy Spanish 'cob' - revalued as a 6 maravedis 'resellado' piece probably of Philip IV (1621-1665) countermarked 166[...] (on coin). Uncertain mint. Measurements: 22 mm in diameter, weight 3.31 g The uneven flan has been profoundly dished by the countermarking process
Created on: Friday 3rd February 2023
Last updated: Friday 3rd February 2023
Spatial data recorded. This findspot is known as 'Braunton CP', grid reference and parish protected.


  • Thumbnail image of DEV-D889AA

Record ID: DEV-D889AA
Object type: COIN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy Spanish 'cob' - revalued as a 6 maravedis 'resellado' piece probably of Philip IV (1621-1665) countermarked 16[...] and 166[...] (on coin). Uncertain mint. Measurements: 24.5 mm in length, 21 mm in width, weight 2.66 g The uneven flan has received a pair of nicks
Created on: Friday 3rd February 2023
Last updated: Friday 3rd February 2023
Spatial data recorded. This findspot is known as 'Braunton CP', grid reference and parish protected.


  • Thumbnail image of DEV-D837CC

Record ID: DEV-D837CC
Object type: COIN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy Spanish 'cob' - probably an 8 maravedis piece of Philip III (1598-1621) possibly dated 1616 or 1618 (on coin). Uncertain mint (see Calico et al. 1982, 103ff.) Measurements: 22.5 mm in diameter, weight 5.81 g This coin has an uneven flan.
Created on: Friday 3rd February 2023
Last updated: Friday 3rd February 2023
Spatial data recorded. This findspot is known as 'Braunton CP', grid reference and parish protected.


  • Thumbnail image of DEV-BD1287

Record ID: DEV-BD1287
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An almost complete late early-medieval to medieval copper-alloy stirrup-strap mount of Williams Class A, Type 8, probably dating to c. AD 1000-1100. It consists of a sub-triangular plate from the base of which a rectangular angled flange projects backwards, at c. 90 degrees to the plane. There is a central circular hole through the plate about one third of the way form the apex and two others near the base, above the flange, these latter slightly misaligned. The plate is shallowly moulded with a large head at the apex facing upwards with stepped in snout and nose and small he…
Created on: Thursday 2nd February 2023
Last updated: Thursday 2nd February 2023
Spatial data recorded.


  • Thumbnail image of DEV-A640ED

Record ID: DEV-A640ED
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A cast bifacial circular post-medieval lead token. Powell Type 2 depicting initials on both faces, dating to c. 1600-c. 1800. The token is decorated with initials in capitals T C, on one side, and H A on the other. The latter sit within a border of raised strokes. This token has suffered some minor circumferential losses. Measurements: diameter 26 mm (max.), weight 8 g
Created on: Wednesday 1st February 2023
Last updated: Wednesday 1st February 2023
Spatial data recorded.


  • Thumbnail image of DEV-A53D9B

Record ID: DEV-A53D9B
Object type: SPOON
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
The abraded, and slightly bent, terminal of a post-medieval cast lead-alloy (pewter) spoon handle of late 17th-century date. Only this element of the flat handle remains; the rest is lost to an old break, while its own terminal is unclear due to abrasions. It is broadly trapezoidal, tapering from an expanded terminal. On the front it is decorated with a raised cast floral design: a flower, possibly a tulip, with large head and leaves emerging from a central stalk; any design below the ground on which this sits is unclear. The reverse bears initials P . L in low relief. Measu…
Created on: Wednesday 1st February 2023
Last updated: Wednesday 1st February 2023
Spatial data recorded.


  • Thumbnail image of DEV-A4EB81

Record ID: DEV-A4EB81
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy vessel rim fragment of late medieval to early post-medieval dating (c. AD 1400-1700). The rim fragment is irregular, broadly sub-triangular, in plan, with a cross section which has a slightly thickened upper lip section and thins as it travels down. The rim type consists of an internally rounded lip which would arguably have sat flat. The exterior and interior surfaces are unpolished and rough. The fragment is a dark green colour, with an uneven surface patina. There are possible traces of sooting below the internal under-hang of the r…
Created on: Wednesday 1st February 2023
Last updated: Wednesday 1st February 2023
Spatial data recorded.


  • Thumbnail image of DEV-7B263D

Record ID: DEV-7B263D
Object type: WEIGHT
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A lead standing weight of octagonal pyramidal form with corroded iron apex loop, probably medieval to post medieval in date. The sides taper from a flat base; there are longer sides connected by shorter ones at the corners. It possibly would have functioned as a three-quarters of a pound weight. Measurements: height 68 mm, base c. 34 mm by 34 mm; weight 337 g For octagonal pyramidal standing weights see Biggs and Withers (2000, 32) nos 72, 74. Read (2021, 283, 285) illustrates and example (no. 1624) with an octagonal cross-section which he dates to the 12th to 16th century; this…
Created on: Monday 30th January 2023
Last updated: Saturday 4th February 2023
No spatial data available.


  • Thumbnail image of DEV-7A76C3

Record ID: DEV-7A76C3
Object type: COIN
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval silver penny of Edward I (AD 1272-1307). Class 3, probably Class 3e, dating to 1280-1282. Mint of York. North (1991, 28) no. 1020 (probably) Measurements: diameter 20.5 mm, weight 1.49 g This coin has suffered a loss at its circumference equating to around 10% of the flan.
Created on: Monday 30th January 2023
Last updated: Monday 30th January 2023
Spatial data recorded.


  • Thumbnail image of DEV-7A162A

Record ID: DEV-7A162A
Object type: COIN
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A clipped medieval silver penny of Edward IV (AD 1461-1470; 1471-1483). Light coinage or second reign type with unclear initial mark struck under Archbishop George Neville, dating to 1465-1472. Mint of York. North (1991, 88, 94) Measurements: diameter 15 mm, weight 0.66 g
Created on: Monday 30th January 2023
Last updated: Monday 30th January 2023
Spatial data recorded.


  • Thumbnail image of DEV-794A6A

Record ID: DEV-794A6A
Object type: COIN
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver penny of Edward I (AD 1272-1307). Class 10ab5 (North 1039/3) dating to 1303-1305. Mint of London. North (1991, 31)
Created on: Monday 30th January 2023
Last updated: Monday 6th February 2023
Spatial data recorded.


  • Thumbnail image of DEV-265412

Record ID: DEV-265412
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy bifacial coin weight for a unite of James I, 2nd coinage, revalued (22 shillings), dating to 1604-1613. The weight is roughly square in shape with bevelled sides. The obverse depicts a crown over XXII s in two lines; the reverse depicts a crowned bust with sceptre facing right.  Measurements: 18.5 mm by 18.5 mm, Thickness: 3 mm, Weight: 9.00 g The type may be seen illustrated by Withers and Withers (1995, 12).
Created on: Thursday 26th January 2023
Last updated: Thursday 27th April 2023
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 9,428
Search server index: valhalla

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 25,810
  • Mean quantity: 2.738
  • Maximum: 7,083

Filter your search

1 - 40 of 9,428 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.