• 

  Image not taken

Record ID: BH-D0A2A2
Object type: KNIFE
Broad period: EARLY MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation
An incomplete iron knife, probably dating to the eighth to tenth centuries AD. It possesses a short rectangular-sectioned whittle tang, which is broken at the end. The other end steps out from both sides at the shoulder to a wide triangular-sectioned blade. The cutting edge is straight, the back edge curving outwards before kinking in towards a break. There is a fuller on one side only. On the fuller side, parallel diagonal lines can be seen. Those above and below the fuller go in alternate directions. It is likely that these lines result from the blade being manufactured from twisted…
Created on: Monday 2nd September 2019
Last updated: Monday 2nd September 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D08F67
Object type: UNIDENTIFIED OBJECT
Broad period: MODERN
County: Darlington
Workflow stage: Awaiting validation
An incomplete iron object of uncertain date and function. The object possesses a circular-section bar, broken at one end with a raised collar 33mm from the break. One other side of the collar, the objects tapers to a corroded break. The corrosion on this object suggests it is modern.
Created on: Monday 2nd September 2019
Last updated: Monday 2nd September 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D07ACB
Object type: KNIFE
Broad period: UNKNOWN
County: Darlington
Workflow stage: Awaiting validation
An incomplete iron object, possibly the tip of a knife blade of uncertain date. The object has a truncated triangular section and such it is clear if the narrower edges a corroded cutting edge of whether it was originally blunt. The 'cutting edge' is straight with a pointed tip. The back edge rises from the tip before angle to run parallel to the blade, ending in a break. THe object has a length of 57mm, a maximum width of 22mm and a thickness of 8mm.
Created on: Monday 2nd September 2019
Last updated: Monday 2nd September 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D06BFC
Object type: STAPLE
Broad period: UNKNOWN
County: Darlington
Workflow stage: Awaiting validation
An incomplete iron object, possibly the leg of a large staple of uncertain date. The object comprises a square-section spike which tapers to a point at one end and is slightly twisted along its length. The other end expands to become rectangular-sectioned and is bent at a 45 degree angle, before ending in a break. This appears to be one leg of a large structural staple. The object measures 188mm in length, a maximum of 18mm in width and has a maximum thickness of 13mm.
Created on: Monday 2nd September 2019
Last updated: Monday 2nd September 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D04A61
Object type: CLEAT
Broad period: UNKNOWN
County: Darlington
Workflow stage: Awaiting validation
A near complete joiner's dog or cleat of uncertain date. The cleat has a rectangular-section body which is oval in plan. It tapers to square-sectioned legs at each end. One leg is broken, the other is heavily twisted, with the twisting extending to the body plate. Whilst smaller versions of this type of fitting may have been used to reinforce the soles of shoes, examples such as this must have a had role in structural capentry. This objects has been twisted around one of the legs, most likely indicating damage caused during extraction from a substantial timber. The cleat measures 89mm…
Created on: Monday 2nd September 2019
Last updated: Monday 2nd September 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D037BC
Object type: KNIFE
Broad period: IRON AGE
County: Darlington
Workflow stage: Awaiting validation
A complete iron knife of Manning (1985) Type 23 dating to the Late Iron Age or early Roman period. The knife possesses a rectangular-sectioned whittle tang, tapering tapering to a point. The other end joins the back edge of the knife blade which curves downwards before curling up at the tip. The cutting edge is stepped forward from the tang and follows the line of the back edge, giving a rounded cutting edge with a sharp tip. The knife measures 168mm in length. The tang measures 53mm in length, 10mm in width and 6mm in thickness. The blade has a length of 114mm, 41mm in width and 4mm …
Created on: Monday 2nd September 2019
Last updated: Tuesday 21st January 2020
No spatial data available.

• 

  Image not taken

Record ID: BH-D01F78
Object type: KNIFE
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
A complete iron knife dating to the Roman period. The knife possesses a rectangular-sectioned whittle tang, tapering towards one end. The tang joins the centre of a triangular-sectioned blade with sharp shoulders. The front and rear edges are parallel, before the cutting edge curves to meet the back at a sharp tip. The blade may be serrated, although it is not altogether clear whether this is the result of chipping or corrosion. The knife has a length of 162mm. The tang has a length of 64mm, a width of 10mm and a thickness of 3mm. The blade has a length of 97mm, a width of 19mm and a …
Created on: Monday 2nd September 2019
Last updated: Monday 2nd September 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D01228
Object type: TWEEZERS
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
A pair of incomplete iron tweezers dating to the Roman period. The tweezers possess rectangular-section arms which are also rectangular in plan, bent into a tight U-shaped spring. Both arms are broken. The arms are decorated with the same simple scheme, comprising two incised lines near the spring and a pair of incised lines enclosing two opposing notches near the break. The tweezers measure 78mm in length, the arms measure 12mm in width and 2mm in thickness. While cosmetic tweezers are usually made of copper-alloy (Eckardt and Crummy 2008), the fact that the pair from Piercebridge ar…
Created on: Monday 2nd September 2019
Last updated: Thursday 2nd July 2020
No spatial data available.

• 

  Image not taken

Record ID: BH-D9E046
Object type: NAIL
Broad period: ROMAN
Workflow stage: Awaiting validation
Two possible iron nails of Manning's Type 9 possibly dating to the Roman period. They have globular heads and stems of varying lengths. Both examples are quite short and were probably primarily used in upholstery and furniture construction, with two copper-alloy examples of this type being used to attached a corner binding to a wooden box from Butt Road, Colchester (Crummy 1983, Fig. 90, 2193).
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D9C3CD
Object type: NAIL
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
Two possible iron nails of Manning's Type 8 possibly dating to the Roman period. They have short stems and hollow, domed heads and were probably used primarily in upholstery.
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D9A07D
Object type: NAIL
Broad period: ROMAN
Workflow stage: Awaiting validation
Six certain iron nails of Manning's Type 7 possibly dating to the Roman period. A further five nails, NAI161-165 may be of this type or simply well-preserved large-headed Type 1 nails.
Created on: Tuesday 16th July 2019
Last updated: Thursday 6th February 2020
No spatial data available.

• 

  Image not taken

Record ID: BH-D99234
Object type: NAIL
Broad period: ROMAN
Workflow stage: Awaiting validation
One incomplete iron nail possibly dating to the Roman period. The nail may be of Manning's (1985, 134) Type 4. It is similar to a Manning Type 3 nail but has only one arm, making it L-shaped.
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D97F06
Object type: NAIL
Broad period: ROMAN
Workflow stage: Awaiting validation
Sixteen complete iron nails and four fragmentary examples which are likely to date to the Roman period. The nails may be of Manning's (1985, 134) Type 3, although they may also be narrow-headed or damaged examples of Type 1 nails. NAI146 is the only certain example of a Type 3.
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D955A6
Object type: NAIL
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
Two iron nails which are likely to date to the Roman period. The nails are of Manning's (1985, 134) Type 2, the second most common type of Roman nail, although much rarer than Type 1s. Both nails are incomplete with broken heads and shafts. They measure 47mm and 42mm in length, 13mm and 7mm in width, and have head widths of 29mm and 17mm. They weigh 32mm and 10mm respectively.
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D926DD
Object type: NAIL
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
133 complete iron nails and 61 incomplete nails possibly dating to the Roman period. They are characterised by the length (more than 15mm) and their robust pyramidal or cone-shaped heads. The nails are of Manning's (1985, 134) Type 1B, the most common type of Roman nail, but unfortunately indistinguishable from those of later periods. 98 were straight, the remainder clenched.
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

• 

  Image not taken

Record ID: BH-D9160D
Object type: NAIL
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
Two iron nails possibly dating to the Roman period. They are characterised by the length (more than 15mm) and their robust pyramidal or cone-shaped heads. The nails are of Manning's (1985, 134) Type 1A, the most common type of Roman nail, but unfortunately indistinguishable from those of later periods. They measure 226mm and 154mm in length and have widths of 15mm and 12mm, whereas the heads have a diameter of 26mm and 27mm. They weigh 198g and 72g.
Created on: Tuesday 16th July 2019
Last updated: Tuesday 16th July 2019
No spatial data available.

Record ID: BH-F1C449
Object type: WEDGE
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
A small iron object, probably a near complete wedge dating to the Roman period. It is rectangular in section, with a slightly ?burred butt, flattening to a corroded and broken chisel-like tip. It may be chisel tip fragment, but the potential burring to the butt indicates that it was a small wedge. A wedge of this size may have been used for splitting timbers. Measurements: L (53) mm ; W (butt) 26 mm ; T (butt) 12 mm ; W (tip) 25 mm ; Wt 57 g ;
Created on: Tuesday 23rd April 2019
Last updated: Monday 15th July 2019
Spatial data recorded.

Record ID: BH-F1B9FD
Object type: WASHER
Broad period: POST MEDIEVAL
County: Darlington
Workflow stage: Awaiting validation
A heavily corroded but complete iron washer dating to the post-medieval to modern period. The washer comprises a perforated flat iron disc. It is flat on one side, slightly domed on the other, giving a ?semicircular section. Measurements: DM (external) (130) mm ; DM (internal) 86 mm ; W (disc) 23 mm ; T (disc) 6 mm ; Wt 168g ; Washer. Complete. Heavilly corroded,
Created on: Tuesday 23rd April 2019
Last updated: Thursday 11th July 2019
Spatial data recorded.

Record ID: BH-F1AF64
Object type: WALL HOOK
Broad period: ROMAN
Workflow stage: Published
An iron wall hook, possibly dating to the Roman period. It comprises a square-sectioned bar, ?burred or expanded at one end, tapering towards a point at the other. From the head, it is bent into a deep U-shape, before continuing straight as a tang. It has a simple form, corresponding to Manning (1985, p. 129) Type A and was possibly made by bending a nail. Measurements: L 44 mm ; L (hook) 17 mm ; D (hook) 19 mm ; L (tang) 27 mm ; max W (bar) 6 mm ; Wt 5 g
Created on: Tuesday 23rd April 2019
Last updated: Monday 15th July 2019
No spatial data available.

Record ID: BH-F1A4B2
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
Nine bent, tapering iron bars. They are either incomplete clenched nails, or fragments of slender staples.
Created on: Tuesday 23rd April 2019
Last updated: Tuesday 18th February 2020
Spatial data recorded.