Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): 0013EE09C6F01184
    • Sort: updated
    • Page: 2

  • Thumbnail image of NMS-354115

Record ID: NMS-354115
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Footplate side lobe from a gilt great square-headed brooch, extant lobe, silver sheet appliqué missing, with stumps of openwork footplate inner border and inner panel frame with cable moulding. Measuring at least 26 x at least 23mm. The breaks are not recent. Hines 1997 Group XVI. Mid 6th century.
Created on: Tuesday 20th August 2013
Last updated: Tuesday 2nd April 2019
Spatial data recorded. This findspot is known as 'Morton on the Hill', grid reference and parish protected.


  • Thumbnail image of NMS-EC685C

Record ID: NMS-EC685C
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of side lobe from an Early Saxon great square headed brooch. Very little original edge surviving, inner panel decorated with engraved lines and ring-and-dot with one ring-and-dot decorated lobe projecting from the edge. The plain side lobe is separated from the engraved inner panel by a curved line. Gilding survives in the engraved lines. Hines (1997) Group XVI or XVII. Circa 525 - 575. Surviving dimensions 17 x 22mm, thickness 1.5mm.
Created on: Wednesday 3rd June 2015
Last updated: Tuesday 2nd April 2019
Spatial data recorded.


  • Thumbnail image of NMS-4D5EC2

Record ID: NMS-4D5EC2
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Saxon copper alloy disc brooch. Extremely worn with cast backward facing beast in low relief just discernible on the front face, all of the edge and the originally segmented border missing. Single broken pin-lug paralelle with edge and very worn catch-plate at right-angles to edge on reverse. Pin missing. Maximum surviving diameter 22mm. Weight 2.1g. 10th - early 11th century.
Created on: Thursday 16th May 2013
Last updated: Tuesday 2nd April 2019
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.


  • Thumbnail image of NMS-822DE5

Record ID: NMS-822DE5
Object type: SPUR
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Middle or Late Saxon incomplete copper alloy prick spur. Almost flat-sectioned smoothly curving bar with slightly convex upper face decorated to one side of the short, conical integral goad with two groups of four transverse grooves and broken across a third group of grooves. Immediately to the other side of the goad two rivets secure two now rectangular fragments of sheet of which no original edge seems to survive, one on the front and one on the reverse, before a blunt terminal. This is probably a repair as similar spurs have symmetrical arms, although the terminal of the arm does no…
Created on: Monday 24th June 2013
Last updated: Tuesday 2nd April 2019
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.


  • Image not taken

Record ID: NMS-AC6854
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Early Saxon copper alloy buckle. Oval-sectioned, oval frame with narrowed bar. Pin missing. Measuring 9 x 18mm. Marzinzik (2003) Type I.5b. Late 5th - 6th century.
Created on: Wednesday 26th June 2013
Last updated: Tuesday 2nd April 2019
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.


  • Thumbnail image of NMS-F8E362

Record ID: NMS-F8E362
Object type: VESSEL
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Early Saxon tinned or silvered fragment (19 x 9mm) of hanging bowl escutcheon, animal-head terminal from hook with prominent ears and open mouth to grip bowl rim (width 2mm). Cf. examples nos.32, 65 in Brenan (1991).
Created on: Tuesday 3rd August 2004
Last updated: Monday 25th March 2019
Spatial data recorded. This findspot is known as 'Little Barningham', grid reference and parish protected.


  • Thumbnail image of NMS-5C56F1

Record ID: NMS-5C56F1
Object type: VESSEL
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Probable bucket mount. Thin rectangular copper alloy sheet with repoussé dots forming a border around the edge and a median longitudinal line, with a piercing in the centre of each short edge. One corner, broken across one of the piercings, is missing and there is possible sooting on the reverse. Length 34mm. Width 12mm. Circa 6th century.
Created on: Wednesday 28th May 2014
Last updated: Monday 25th March 2019
Spatial data recorded.


  • Thumbnail image of NMS-6E1D71

Record ID: NMS-6E1D71
Object type: VESSEL
Broad period: BRONZE AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Twenty fragments of a Middle or Late Bronze Age copper alloy cauldron, consisting of at least two cast staples and one or two ring handles. Recovered in four groups (items 1 - 10, 11 - 16, 17 - 19 & 20 - 21) with NGRs recorded for each find spot, but association between NGR and individual objects not retained except for nos. 1, 15 and 16. All the fragments are highly corroded. Handle 1: Three re-fitting fragments of cast copper alloy ring (two fragments from group 11 - 14, one fragment from group 2 - 10). The section varies from circular (9mm diameter) to oval (12 x 11 mm). Origin…
Created on: Tuesday 11th June 2013
Last updated: Monday 25th March 2019
Spatial data recorded. This findspot is known as 'Salle', grid reference and parish protected.


  • Thumbnail image of NMS-4DF290

Record ID: NMS-4DF290
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of copper alloy Middle Saxon ansate brooch. Oval terminal decorated with eight disconnected straight lines forming a cross within a lozenge. Stub of triangular-sectioned bow almost all of which is missing. Bent, rectangular catch-plate on reverse, pin missing. Surviving length 14mm. Surviving width 11mm. Width of bow at break 4.5mm. For a similar, almost complete example, see NMS-1A06F2. Thörle (2001) Gruppe II A1c.
Created on: Thursday 16th May 2013
Last updated: Sunday 24th March 2019
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.


  • Thumbnail image of NMS-293A9A

Record ID: NMS-293A9A
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Middle or Late Saxon copper alloy strap-end of Thomas' Class A, Type 5. Split end broken across one of the two pierced attachment lobes, with a semi-circular field below. The edges are scalloped (four on each side) either side of a central rectangular panel, below which is the animal head terminal. The semi-circular field contains a chevron and triangle in low relief probably originally reserved on a niello field, now missing. In the centre of the rectangular panel is a niello field with scrolls of silver wire inlay. The animal head terminal has circular ears, lentoid eyes with a centr…
Created on: Tuesday 30th December 2014
Last updated: Saturday 23rd February 2019
Spatial data recorded. This findspot is known as 'Burnham Market', grid reference and parish protected.


  • Thumbnail image of NMS-BEE056

Record ID: NMS-BEE056
Object type: BULLA
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Medieval papal bulla of Clement V (pope 1305-14). The bulla is poorly preserved, being very worn on both obverse and reverse sides. The obverse reads CLE/MENS relatively clearly, but wear and some loss at the bottom of the bulla makes it difficult to see the numeral after the :PP. Two visible vertical strokes make this most likely to be the V typical of Clement V's bulla, as Clement II (1046 - 7) used bullae of a very different design (without the SPA SPE reverse, introduced by Gregory VII, 1073-85) and there does not appear to be space for any further vertical strokes to have been los…
Created on: Wednesday 2nd April 2014
Last updated: Thursday 21st February 2019
Spatial data recorded.


  • Thumbnail image of NMS-50BD37

Record ID: NMS-50BD37
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Early Saxon copper alloy sleeve clasp of Hines form B12. Just over half survives. Copper alloy bar, slightly curved transversely, with transverse grooves and three rectangular bosses slightly wider than the bar, two of which survive. Next to each boss is a n integrally cast pierced lug for attachment. Broken across the integrally cast loop. Surviving length 25mm. Original length (reconstructed) 34mm. Surviving width 15mm. Late 5th - 6th century. ES1.
Created on: Monday 22nd October 2012
Last updated: Wednesday 20th February 2019
Spatial data recorded. This findspot is known as 'Morley', grid reference and parish protected.


  • Thumbnail image of NMS-C525F1

Record ID: NMS-C525F1
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete wrist clasp. Rectangular flat sectioned bar with two grooves each flanked on either side by a pair of engraved lines. Rivet at either end secures bar to metal sheet which has no surviving original edge and is now the same size and shape as the bar. At least 36 x 7mm. Separate bars are known from Hines forms B13, B14 and B17.
Created on: Thursday 16th November 2006
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Breckland', grid reference and parish protected.


  • Thumbnail image of NMS-77BF92

Record ID: NMS-77BF92
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Saxon cloisonné enamel gilt copper alloy disc brooch with seven lobes, each originally containing a glass sphere. Apart from these tiny missing pieces of glass, the brooch is in remarkable condition with gilding present over most of the metal surfaces, even on the edges of the cells, & the enamel cells are brightly coloured. Soldered onto the reverse are a pin lug consisting of two lugs with a wire pin looped around an copper alloy spindle held by the lugs, & a short, low catchplate. The cloisonné enamel decoration consists of four semicircular cells, two blue & two …
Created on: Wednesday 28th July 2004
Last updated: Tuesday 19th February 2019
Spatial data recorded. This findspot is known as 'Quidenham', grid reference and parish protected.


  • Thumbnail image of NMS-546DD8

Record ID: NMS-546DD8
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Eary Saxon copper alloy sleeve clasp eye-plate. Hines Form B20. Cast in one transversley curved plate, bar with three rectangular panels separated by two groups of irregular transverse grooves. The loop is missing, with fairly worn breaks at the edge of the bar. The rear of the bar is stepped before four undecorated conjoined knobs, with a circular piercing between the first and second and third and fourth knob. The rear edge is damaged. See Hines' (1993) 59, fig.111a and 65, fig.124c. 6th century. Length 35.5, Width 16mm.
Created on: Tuesday 15th January 2013
Last updated: Friday 15th February 2019
Spatial data recorded.


  • Thumbnail image of NMS-930565

Record ID: NMS-930565
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Early Saxon copper alloy sleeve clasp of Hines form B18c. Rectangular bar with five wide transverse grooves dividing it into six rectangular bosses five of which have three incised transverse lines and one which has two transverse lines. The rear edge is slightly recessed, and shaped to form three conjoined semi-circles divided from each other by circular piercings behind the bar and v-shaped notches along the rear edge. Each semi-circle is decorated with two pairs of lightly incised lines forming a chevron. There is a complete blunt hook on the reverse of the bar and traces of fabric …
Created on: Wednesday 30th January 2013
Last updated: Friday 15th February 2019
Spatial data recorded. This findspot is known as 'Binham', grid reference and parish protected.


  • Thumbnail image of NMS-3E9666

Record ID: NMS-3E9666
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Fragment of copper alloy Roman developed crossbow brooch. One arm of crossbar only with large, integral onion-shaped terminal knop, collared before oval-sectioned stepped bar with two blind holes on upper face. A fragment of the broken copper alloy axis bar protrudes from the break. Surviving dimensions. Length 27mm. Depth 12mm. Diameter of knop 11mm. See a similar example from Richborough (Bayley and Butcher, 2004, fig.91, no.323). 340 - 460 AD ( Bayley and Butcher, 2004, 185).
Created on: Monday 14th January 2013
Last updated: Monday 11th February 2019
Spatial data recorded. This findspot is known as 'Binham', grid reference and parish protected.


  • Image not taken

Record ID: NMS-2771C4
Object type: BROOCH
Broad period: ROMAN
County: Ceredigion
Workflow stage: Awaiting validation Find awaiting validation
Roman hinged bow brooch. Broken, corroded and worn, with trumpet-like head and oval-sectioned bow. Catch-plate, pin, axis bar and part of head missing. The surface is powdery and cracked and may be burnt. Surviving length 47mm. Surviving width 15mm. 1st century AD.
Created on: Thursday 17th December 2015
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Image not taken

Record ID: NMS-28E99A
Object type: BROOCH
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy Colchester Derivative Hinged brooch (Mackreth, 2011, Type CD H 5.k.). Circular-sectioned wings with seam or groove along upper and lower face, upper part of hinged pin held by axis bar, upper part of plain oval-sectioned bow. Lower part of bow, catch-plate and most of pin missing. Traces of white metal coating. Width 47mm. Surviving length 24mm.
Created on: Thursday 17th December 2015
Last updated: Monday 11th February 2019
Spatial data recorded.


  • Thumbnail image of NMS-42BB88

Record ID: NMS-42BB88
Object type: BROOCH
Broad period: IRON AGE
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Iron Age or Roman copper alloy Nauheim Derivative brooch. Flat, undecorated bow tapering slightly from spring with four coils to distorted foot with broken catch-plate. Transition between bow and pin smooth with only slight change in width and thickness. Pin missing. Surviving length 48mm. Width at spring 12mm. Maximum width of bow 4mm. Circa 50 BC - 80 AD.
Created on: Friday 18th December 2015
Last updated: Monday 11th February 2019
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 2,342
Search server index: valhalla

You are viewing records: 21 - 40.

Search statistics

  • Total quantity: 4,026
  • Mean quantity: 1.719
  • Maximum: 285

Filter your search

Institution

21 - 40 of 2,342 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.