Back to simple search | Back to advanced search
You searched for:
Record ID: NMS-4B1C86
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Probable Roman copper alloy steelyard weight. Cast, incomplete, hollow pear-shaped casing with two opposed, flattened sides and a collared opening at the apex. About half missing, with ancient, irregular breaks. If a weight, it would originally have been filled with lead, but no trace of a lead survives, even around the internal flashing.
Height 57mm. Width (flat side to flat side) 45mm.
For similar examples containg lead see
NMS-503D97 and NMS-D60A95.
Created on: Thursday 16th May 2013
Last updated: Tuesday 6th August 2013
Spatial data recorded.
This findspot is known as 'Barnham Broom', grid reference and parish protected.
Record ID: NMS-4B7F74
Object type: BRACELET
Broad period: ROMAN
County: Norfolk
Workflow stage: Published
Fragment of copper-alloy Roman bracelet. Two strands of wire twisted around each other, then flattened on the internal, upper and lower faces to give an almost square overall section. Broken at both ends, curved. Section 2 x 2mm.
Created on: Thursday 16th May 2013
Last updated: Wednesday 10th December 2014
Spatial data recorded.
This findspot is known as 'Barnham Broom', grid reference and parish protected.
Record ID: NMS-3C570A
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Pierced silver siliqua of Gratian, reverse VIRTVS ROMANORVM type, mintmark and further details illegible, slightly clipped and with relatively wide (2-3mm) piercing near edge (which has worn through) between 2 and 3 o'clock (obverse), weight 1.22g, AD378-83
The worn piercing shows that this coin has been reused as a pendant and thus qualifies at an item of Treasure. It is quite worn but not excessively so. The reuse as a pendant probably belongs to the 5th century although a late Roman reuse cannot be ruled out.
Created on: Tuesday 7th April 2015
Last updated: Tuesday 21st July 2015
Spatial data recorded.
This findspot is known as 'Foulsham', grid reference and parish protected.
Record ID: NMS-788C89
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Norfolk
Workflow stage: Published
Fragment of gold sheet from an unidentified object. The sheet is folded forming a front and back-plate the edges of which are torn, except for the lower edge of the back-plate which appears neatly cut, and the straight folded edge. The front-plate is decorated with a row of stamped dots above a row of repoussé pellets parallel with the folded edge, the lower edge possibly torn along a third row of pellets or dots. Surviving dimensions 12 x 7mm. Weight 0.4g.
Although ancient (over 300 years old) the decoration would be consistent with a Bronze Age, Roman or Early Medieval date, and…
Created on: Friday 10th April 2015
Last updated: Monday 21st December 2015
Spatial data recorded.
This findspot is known as 'Foulsham', grid reference and parish protected.
Record ID: NMS-E362FA
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Published
Incomplete silver developed crossbow brooch of Bayley and Butcher (2004) type T192. The crossbar, axis bar and pin are missing, broken at the end of the highly arched pentagonal-sectioned bow. The bow becomes abruptly circular-sectioned with a collar before the foot-plate, which is straight sided, bevelled on either edge with a single transverse rib and a pair of ribs at the upper end and two pairs of transverse ribs at the lower end. The sides of the sheath catch-plate have broken flush with the reverse of foot, with only the blunt terminal of the catch-plate surviving.
The upper …
Created on: Wednesday 15th April 2015
Last updated: Monday 5th September 2016
Spatial data recorded.
This findspot is known as 'Grimston', grid reference and parish protected.
Record ID: NMS-B6A4F4
Object type: INTAGLIO
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman intaglio. Oval carnelian with flat upper face and bevelled edges on the reverse, with a thin rectangular-sectioned gold band around the edge. The upper face is engraved with a naked male standing figure facing left holding stems of corn in his left hand, and an unidentified object is his right, with drapery falling from his left arm. SECVND INI is engraved on the left edge of the gem in retrograde, the N and D ligatured.
Measuring 13 x 10mm. Thickness 2mm. Weight 0.5g.
43 - 410 AD.
Created on: Thursday 7th May 2015
Last updated: Thursday 4th October 2018
Spatial data recorded.
This findspot is known as 'Billingford', grid reference and parish protected.
Record ID: NMS-B5C2DA
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Pierced denarius of Domitian, reverse TR P COS VII DES VIII P P, Dolphin on anchor, weight 2.38g, pierced at 12 o'clock (obverse), there appear to be casting seams around the edge and this is presumably a cast copy of what might best be termed 'white metal', the original dates to AD81
Created on: Tuesday 19th May 2015
Last updated: Wednesday 17th February 2016
Spatial data recorded.
Record ID: NMS-5C0121
Object type: COIN HOARD
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Eight gold, silver and bronze coins. Iron Age and Roman. Four coins found subsequently and probably addenda to this group are listed afterwards.
1. A Gallo-Belgic Broad Flan gold stater, Left type attributed to the Bellovaci, weight 7.37g, 2nd century BC/ early 1st century BC (ABC 4)
2. Pale, base gold South Ferriby stater, Corieltauvian, so-called Wheel type, weight 3.18g, late 1st century BC/ early 1st century AD (ABC 1749 / BMC 3180)
3 and 4. Silver units (2), both Icenian Patter-horse types, originally stuck together but now separated, total weight 1.53g, late 1st century…
Created on: Wednesday 27th May 2015
Last updated: Monday 13th November 2017
Spatial data recorded.
This findspot is known as 'North West Norfolk', grid reference and parish protected.
Image not taken
Record ID: NMS-DABAC3
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy foot from Roman bow brooch. Incomplete cast openwork triangular catch-plate broken at the fold and across the openwork. The oval-sectioned bow is very abraded. Upper parts of brooch and pin missing. Surviving length 36mm. 1st century AD.
Created on: Tuesday 2nd June 2015
Last updated: Tuesday 2nd June 2015
Spatial data recorded.
Image not taken
Record ID: NMS-DBADA7
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy Roman brooch, Mackreth (2011) Type CD H (Colchester Derivative Hinged). Circular-sectioned enclosed wings decorated with a single angled line, with damaged open terminals, filled with iron corrosion from the axis bar, with slot for (missing) pin. D-sectioned bow with three deep grooves, the outer grooves tapering towards the break. Lower part of brooch and pin missing. Surviving length 21mm. Width of wings 24mm. 1st century AD.
Created on: Tuesday 2nd June 2015
Last updated: Tuesday 2nd June 2015
Spatial data recorded.
Image not taken
Record ID: NMS-DBC34E
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy Roman brooch, Mackreth (2011) Type CD H (Colchester Derivative Hinged). Circular-sectioned enclosed wings with damaged open terminals, filled with iron corrosion from the axis bar, with slot retaining the stub of the broken copper alloy pin. D-sectioned bow with a shallow groove either side of a median rib. Lower part of brooch and pin missing. Surviving length 18mm. Width of wings 27mm. 1st century AD.
Created on: Tuesday 2nd June 2015
Last updated: Tuesday 2nd June 2015
Spatial data recorded.
Image not taken
Record ID: NMS-DBDE7E
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy Roman brooch, Mackreth (2011) Type CD RH (Colchester Derivative Rear Hook). C-sectioned wings with iron corrosion on the reverse, broken hook. D-sectioned bow, the upper surface faceted four times, scar from missing catch-plate on reverse, pin missing. Length 40mm. Width of wings 21mm. 1st century AD.
Created on: Tuesday 2nd June 2015
Last updated: Tuesday 2nd June 2015
Spatial data recorded.
Image not taken
Record ID: NMS-DC4BF9
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy Roman brooch, Mackreth (2011) Type CD PH (Colchester Derivative Polden Hill). Flat wings, the end-plates missing except for one disconnected fragment attached to the spring, copper alloy axis bar held by central pierced lug, chord held by pierced crest on the head. D-sectioned bow tapering to a worn broken point shortly after the head. Spring with four coils, pin missing. Surviving length 19.5mm. Surviving width 16mm. 1st century AD.
Created on: Tuesday 2nd June 2015
Last updated: Wednesday 13th July 2016
Spatial data recorded.
Image not taken
Record ID: NMS-284753
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy Colchester Derivative Rear Hook brooch (Mackreth 2011 type CD RH). C-sectioned wings, broken rear hook, slight crest at top of D-sectioned bow with a groove along each edge fading before the break. Spring, pin, and lower part of bow missing. Width 22mm. Surviving length 25mm.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.
Image not taken
Record ID: NMS-295F67
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy Trumpet brooch (Mackreth 2011 type TR). Single loop broken, pin and spring missing, sub-oval-sectioned bow with half-round moulding, broken before catch-plate. Extremely worn and bent. Surviving length 32mm. 1st - 2nd century.
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.
Record ID: NMS-9D9633
Object type: FINGER RING
Broad period: ROMAN
County: Norfolk
Workflow stage: Published
Roman silver finger ring of Henig Type II. D-sectioned hoop expanding smoothly from the rear through the shoulders to form the slightly flattened bezel set with an oval carnelian intaglio depicting a standing figure facing (in impression) right. Hardened dirt or corrosion product fill part of the engraving. Width of bezel 8mm. Height of hoop 18mm. Width of hoop 21mm. Weight 3.9g. 1st - 2nd century AD.
Created on: Tuesday 11th August 2015
Last updated: Monday 7th December 2015
Spatial data recorded.
Image not taken
Record ID: NMS-7333DC
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy brooch, Mackreth (2011) CD RH type. C-sectioned wings, elaborately moulded with plain narrow ribs, knurled ribs and concave mouldings, the end of one missing, with corrosion probably from solder on the rear of both. The rear hook, spring and pin are missing. Trapezoidal-sectioned bow with three median longitudinal grooves with short transverse dashes arranged alternately to give the impression of two zigzag lines. The openwork catch-plate is broken across two apertures almost flush with the rear of the bow, and the tip of the foot is missing. There are traces of tin…
Created on: Friday 21st August 2015
Last updated: Friday 21st August 2015
Spatial data recorded.
Image not taken
Record ID: NMS-2771C4
Object type: BROOCH
Broad period: ROMAN
County: Ceredigion
Workflow stage: Awaiting validation
Roman hinged bow brooch. Broken, corroded and worn, with trumpet-like head and oval-sectioned bow. Catch-plate, pin, axis bar and part of head missing. The surface is powdery and cracked and may be burnt. Surviving length 47mm. Surviving width 15mm. 1st century AD.
Created on: Thursday 17th December 2015
Last updated: Monday 11th February 2019
Spatial data recorded.
Record ID: NMS-0134FD
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy furniture fitting, perhaps a casket or box mount. Hollow backed, circular stud with the lion's face in high relief, with grooves defining the mouth and snout, and details of the eyes. The outer flange is engraved with radiating lines representing the mane around rounded ears. The reverse of the mount is filled with white metal and a central corroded iron shank. Diameter 25mm. Height 13mm. For similar examples see NMS-DB80B4, and an example from Skeleton Green, Hertfordshire (Partridge, 1981, 314, fig.119a). Circa 43 - 150 AD.
Created on: Monday 21st September 2015
Last updated: Friday 24th June 2016
Spatial data recorded.
This findspot is known as 'Scarning', grid reference and parish protected.
Image not taken
Record ID: NMS-70E9A5
Object type: POT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman greyware jar rim sherd. Weight 14.8g. Original diameter circa 120mm. Mid 1st - 4th century AD.
Created on: Thursday 26th November 2015
Last updated: Thursday 26th November 2015
Spatial data recorded.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 2,438
Search server index: objects
You are viewing records: 141 - 160.