• 

  Image not taken

Record ID: NMS-75C6B3
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy strap fitting. Semi-circular, broken at one end, slightly hollow-backed, with radiating grooves on the upper face. Two incomplete rectangular-sectioned integral attachment spikes on the reverse. Measuring at least 35mm (44 reconstructed) x 20mm. Circa 17th century. No. 63.
Created on: Wednesday 20th April 2016
Last updated: Wednesday 20th April 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-0ED0CC
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-fitting. Rectangular strap-slide, D-sectioned frame, slightly expanded upper edge. No visible rivet. Measuring 15 x 22mm externally, to hold a strap up to 18mm wide. Circa 13th - 14th century.
Created on: Thursday 21st January 2016
Last updated: Thursday 21st January 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-BDC58A
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-fitting. Sub-rectangular sheet, folded widthways, with two slots, two rivet holes, front-plate broken transversely, gilded, one transverse engraved line on front-plate. Two slots suggests a buckle with two pins or some other type of fitting, perhaps a folding strap-clasp. Measuring 14 x 25mm. 13th - 15th century.
Created on: Tuesday 5th January 2016
Last updated: Tuesday 5th January 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-84E653
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy bar mount and suspension ring. Rectangular D-sectioned mount with flange to either side engraved with rockerarm, the lower end folded to form a loop secured to the mount with a single rivet. The loop holds a ring with irregular faceted section. Mount 15 x 7mm. External diameter of ring 13mm. Internal diameter 7mm. See Egan and Pritchard (2002, 221, fig.138, no.1190). Circa late 14th century.
Created on: Wednesday 9th December 2015
Last updated: Wednesday 9th December 2015
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1A26ED
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap fitting. Rectangular-sectioned ring attached to a rectangular flanged bar mount with a single rivet securing the back of the loop to the front-plate. Bar mount 12 x 5mm. External diameter of ring 14mm. Internal diameter 9.5mm. See examples from late 14th century contexts in Egan and Pritchard (2002, 221, no.119, and example illustrated from the collections of the Museum of London).
Created on: Friday 4th December 2015
Last updated: Friday 4th December 2015
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-6F6355
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-slide. Rectangular sheet frame with overlapping join secured by a single rivet with square rove. Frame 12 x 16mm. Internal width 14mm. Gap between rove and frame 2mm. Circa 13th - 14th century.
Created on: Thursday 26th November 2015
Last updated: Thursday 26th November 2015
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-6F1E9C
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-slide. Rectangular-sectioned trapezoidal frame, with two internal projections. Frame 22.5 x 14mm. Maximum internal width for strap 14mm. 13th - 14th century.
Created on: Thursday 26th November 2015
Last updated: Thursday 26th November 2015
Spatial data recorded.

Record ID: NMS-E1903D
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy probable strap fitting. Irregularly faceted-sectioned bar with straight outside edge, the ends bent at right-angles to form straight sides which expand slightly to the transversely pierced terminals. There are file marks over much of the surface with traces of white metal coating, probably tinning. Measuring 10.5 x 31mm. Thickness of bar 3mm. Perhaps a composite strap loop, buckle or pendant loop with unusual attachment (see Egan and Pritchard, 2002, 235. Fig.150, nos.1266 and 1267 for strap loops, and 223, fig.140 for pendant loops). Circa 13th - 14th century.
Created on: Tuesday 21st July 2015
Last updated: Tuesday 21st July 2015
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-03200B
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy belt mount in the form of an acorn with slightly convex front and slightly concave reverse, with two integral circular-sectioned attachment spikes on the reverse, both bent inwards and one broken. Length 23mm. Width 12mm. 17th century.
Created on: Friday 29th August 2014
Last updated: Friday 29th August 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2E9DB3
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap loop. Irregular faceted-sectioned frame with expanded oval top with median arris externally. There are no internal projections and no visible rivet or rivet hole. Measuring 19 x 13mm. Internal width 15mm. Circa 13th - 14th century.
Created on: Thursday 19th June 2014
Last updated: Thursday 19th June 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2E25A1
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy hooked mount from sword belt. Collared and lobed pierced terminal with iron corrosion on the front and back, faceted domed plate, waisted at one end with copper alloy rivet before springing of broken rearward facing hook. Length at least 47mm. Width 20mm. See Read (2008, 226, no.813). Circa 17th century.
Created on: Thursday 19th June 2014
Last updated: Monday 2nd September 2019
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1AC0C2
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy belt mount. Slightly domed sexfoil stamped out to the shape of the lobes, with central circular hole and two separate rivets with circular roves. Worn engraved lines divide the foils. Diameter 23mm. See Egan and Pritchard (2002, 189, fig.119, nos.987 - 990, 996 and 1001). 13th -15th century.
Created on: Wednesday 18th June 2014
Last updated: Wednesday 18th June 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-612C81
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-slide. Rectangular-sectioned frame with one larger and one smaller D-shaped section divided by two internal projections. Measuring 20 x 16mm. For a strap up to 11mm wide.
Created on: Thursday 20th February 2014
Last updated: Thursday 20th February 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-7CDE74
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-plate from a clasp. Rectangular plate folded widthways and recesed for the (missing) frame, with no slot or piercing for a buckle pin. Extnading slightly towards concave attachment edge with two rivets. Undecorated. Measuring 27 x 13mm.
Created on: Thursday 16th January 2014
Last updated: Monday 20th January 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-7CC4C6
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval rectangular strap-loop. Rectangular-sectioned copper alloy frame with file-marks on both faces and an integral circular-sectioned rivet. Measuring 16 x 11.5mm. For a strap with a maximum width of 12.5mm. 13th - 14th century. See Egan and Pritchard (2002, 232, fig.147, nos.1236, 1237 and 1239) for similar examples
Created on: Thursday 16th January 2014
Last updated: Monday 20th January 2014
Spatial data recorded.

Record ID: NMS-DEE1B5
Object type: STRAP FITTING
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation
Late Iron Age or Early Roman copper alloy strap-slide. Circular openwork plate consisting of an oval-sectioned frame with two conjoined roundels forming a bar across the centre with pelta-shaped apertures to either side. There is an engraved line around the outer edge of the frame, which is slightly damaged and corroded in places. Each roundel has a central round cell filled with well-preserved yellow enamel surrounded by a circular cell retaining corroded red enamel. On the revers in line with the roundels is a rectangular, D-sectioned loop, the flat face inwards. Diameter 30.5mm.…
Created on: Thursday 21st November 2013
Last updated: Wednesday 15th April 2020
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-527424
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy shield-shaped strap-end with C-sectioned transverse bar at attachment edge secured by two rivets with circular roves on the reverse. Concave constrictions on either side before rounded end. There is a single rivet without head or roves near the terminal. Length 21.5mm. Width 17mm. See Egan and Pritchard (2002, 157, fig.103, nos.735 and 737) for similar examples. Probably for use with a folding strap-clasp. c. 14th century.
Created on: Monday 21st October 2013
Last updated: Wednesday 13th November 2019
Spatial data recorded.

Record ID: NMS-DF1F07
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy swivel for the attachment of a leash consisting of two rings, both with moulded animal heads clasping a boss. One of these, slightly flatter at the rear, has an integral shank on which the other turns. The two elements still swivel freely. Zoomorphic terminals are quite typical: a recent survey of medieval swivels from Norfolk indicated that twenty-four out of thirty-four examples were so decorated. Such objects were probably used with hounds (Ashley 2006, 105, fig. 1 no.2). Length 46mm. Width 26mm. Internal diameter 16-16.5mm. 12th century.
Created on: Wednesday 28th August 2013
Last updated: Wednesday 17th January 2018
Spatial data recorded.

Record ID: NMS-473026
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Repoussé belt mount, rectangular, possibly moulded into the form of a passant beast with dot for eye. Central perforation, separate rivet missing. Width 21 x 15mm. 14th century.
Created on: Wednesday 21st August 2013
Last updated: Wednesday 21st August 2013
Spatial data recorded.

Record ID: NMS-3777B7
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Incomplete possible strap distributor, comprising two sides, the short one broad and flat-sectioned, the longer narrow and oval-sectioned, of a probably rectangular frame, with square boss at both surviving corners (at ends of short side). One boss decorated with engraved saltire within border, the other with oblique line within border. Measuring 20 x at least 25mm. Probably for two straps which would have been looped around the two opposed narrowed bars between bosses. A broadly similar although square example was found in Middle Harling, cf. EAA 74, Fig.51, no.129, miss-identified a…
Created on: Tuesday 20th August 2013
Last updated: Tuesday 20th August 2013
Spatial data recorded.

Record ID: NMS-34F626
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Probable folding strap clasp with only the bar of the frame extant. Most of both sides of the rectangular sheet plate are missing as a result of scuffing, while all of the attachment edge has been lost. A large V-shaped cut-out appears to consist mostly of damage, but was probably once an aperture. The front face is decorated with a probably abstract pattern of oblique, transverse and longitudinal lines, some closely spaced. Plate measures at least 23 x at least 16.5mm. 14th - 15th century.
Created on: Tuesday 20th August 2013
Last updated: Tuesday 20th August 2013
Spatial data recorded.

Record ID: NMS-341287
Object type: STRAP FITTING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman - Early Saxon copper alloy propeller-shaped military belt stiffener, twin perforations in both sub-triangular ends (one contains a copper alloy rivet), oval expansion in the centre decorated with a double ring-and-dot. The outside edges are chamfered with some damage at both ends. Length 42mm. Width 18mm. 4th century (Clarke 1979, 285), but such objects occur in Early Anglo-Saxon contexts (Macgregor and Bolick 1993, 210 and 212, cat. nos. 36.8 and 9).
Created on: Tuesday 20th August 2013
Last updated: Tuesday 20th August 2013
Spatial data recorded.

Record ID: NMS-232F66
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval belt mount, cast in the form of a crown with engraved detail, pierced by two rivet-holes with copper alloy rivets (length 3mm). 16 x 10mm. Cf. related types in Dress. Access. figs.126-7. 15th century.
Created on: Monday 19th August 2013
Last updated: Monday 19th August 2013
Spatial data recorded.

Record ID: NMS-21B713
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval gilt belt mount, sheet cut in the form of a crown, repoussé dot in both upper arched angles, twin perforations in base, 17 x 15mm. 13th-14th century.
Created on: Monday 19th August 2013
Last updated: Monday 19th August 2013
Spatial data recorded.

Record ID: NMS-2143A3
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy unusual elaborate belt fitting: bar mount, large central openwork quatrefoil with two opposed projecting bars (one slightly bent) with perforated foliate terminal lobes. 17 x (unbent) 45mm. Cf. less elaborate types in Dress Access. fig.134. 13th-14th century.
Created on: Monday 19th August 2013
Last updated: Monday 19th August 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E2B980
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap slide. Rectangular-sectioned frame with two internal triangular projections. Measuring 17 x 12mm, to hold a strap up to 11mm wide.
Created on: Friday 16th August 2013
Last updated: Friday 16th August 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E2B303
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap slide. Rectangular-sectioned frame with two internal triangular projections. Measuring 21 x 15mm, to hold a strap up to 14mm wide.
Created on: Friday 16th August 2013
Last updated: Friday 16th August 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-4E7A61
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval strap loop. Rectangular frame, rectangular-sectioned, with complete internal transverse bar. Top edge expanded to form irregular multi-foil knop with radiating grooves emphasising the design. Measuring 18.5 x 18mm. For a strap up to 14.5mm wide. 13th - 14th century.
Created on: Friday 9th August 2013
Last updated: Friday 9th August 2013
Spatial data recorded.

Record ID: NMS-3A1048
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-fitting. Rectangular-sectioned plate with two grooved notches in the rear edge, bevelled sides on the upper face, a transverse ridge before an oval frame with transverse ridge on either edge before a rounded knop terminal and double-lobed (almost keyhole-shaped) aperture. There are two iron rivets in the plate and tinning on the plate and frame. See NMS-462CA4 for a very similar example. Perhaps a form of clasp, similar to the female part of the fitting in Read (2008, 225, no.807). Length 49.5mm. Width 11mm.
Created on: Thursday 8th August 2013
Last updated: Tuesday 3rd September 2013
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-6A74E4
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-slide. Sub-rectangular frame, rectangular-sectioned, with two internal; traingular projections and central rectangular boss on upper face of top. Measuring 20.5 x 18mm. To hold a strap 13mm wide. 12th - 14th century.
Created on: Wednesday 17th July 2013
Last updated: Wednesday 17th July 2013
Spatial data recorded. This findspot is known as 'Rougham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-6A5D12
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-slide. Sub-rectangular frame with pointed top, rectangular-sectioned bar retaining single separate internal copper alloy rivet, pentagonal-sectioned sides and top. Multiple file marks on every face. Measuring 32 x 21mm. To hold a strap up to 24mm wide.
Created on: Wednesday 17th July 2013
Last updated: Wednesday 17th July 2013
Spatial data recorded. This findspot is known as 'Rougham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-696254
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval bar mount from strap or belt. Central lobe with large circular hole with D-sectioned arms to either side which taper slightly to pierced lobed terminals pierced. One terminal is missing. Length (reconstructed) 18mm. Width 9mm. See Egan and Pritchard (2002, 214, fig.134, no.1154 - 1158) for examples from late 12th - early 14th century contexts.
Created on: Wednesday 17th July 2013
Last updated: Wednesday 17th July 2013
Spatial data recorded. This findspot is known as 'Rougham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-419545
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy belt mount in the form of a scallop shell with separate central rivet. Measuring 19 x 15mm. Rivet 5mm. See Egan and Pritchard (2002, 201, fig.1083) for broadly similar mount. c. 15th century.
Created on: Monday 15th July 2013
Last updated: Monday 15th July 2013
Spatial data recorded.

Record ID: NMS-462CA4
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-fitting. D-sectioned bar with stylised pointed animal head terminal at one end consisting of a ridge to either side indicating ears and concave mouldings defining the snout. There is a rivet through the animal head terminal and another at the other end before a transverse ridge beyond which the plate expands to form an oval frame with rounded knop terminal and double-lobed (almost keyhole-shaped) aperture. Perhaps a form of clasp, similar to the female part of the fitting in Read (2008, 225, no.807). Length 52mm. Maximum width 11mm.12th - 14th century.
Created on: Friday 21st June 2013
Last updated: Thursday 8th August 2013
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.

Record ID: NMS-451697
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy strap-clasp plate or strap-end. Rectangular sheet folded widthways, the end looped but not recessed for a frame. The long edges on the front-plate are bevelled with two notches at either end. There is a trefoil aperture with slight notch, and rivet to either side, at the attachment end. The remains of a leather strap survive between the plates. Length 43mm. Width 25mm. 13th - 14th century.
Created on: Friday 21st June 2013
Last updated: Tuesday 6th August 2013
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-1678E5
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy pendant loop from strap or belt. Openwork quatrefoil frame, edges bevelled, with a large, rounded knop projecting from the centre of three foils, the fourth constricted for suspension from a mount. For similar examples see Egan and Pritchard (2002, 221, fig.138). Length 19mm. Width 21.5mm. 14th century.
Created on: Wednesday 19th June 2013
Last updated: Wednesday 19th June 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-74F146
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy shield-shaped strap-end with pointed projection in centre of attachment edge and opposed notch on either side. Separate D-sectioned transverse bar mount secured by two rivets (one missing), with a third rivet near the end of the plate. Length 19mm. Width 17mm. c.14th century. See Egan and Pritchard (2002, 157, fig.103).
Created on: Thursday 30th May 2013
Last updated: Tuesday 12th November 2019
Spatial data recorded. This findspot is known as 'Rougham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-366351
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
Medieval copper alloy shield-shaped strap-end. Waisted plate with almost all of original edge missing, with separate rectangular, bar mount of arched section at attachment edge. Two rivets, one through plate and one securing bar mount, both with incomplete rectangular roves on the reverse to hold a thickness of circa 1.5mm. Length 15mm. Width 13mm. See Egan and Pritchard (2002, 157, no.735) for a similar example. Late 14th century.
Created on: Wednesday 15th May 2013
Last updated: Tuesday 12th November 2019
Spatial data recorded. This findspot is known as 'Blyford', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-FD5056
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy pendant loop. Oval frame with narrowed bar at one end and collared globular knop at the other. See Egan and Pritchard (2002, 221, fig.138, no.1192). 14th century. Length 20mm. Width 14mm.
Created on: Thursday 18th April 2013
Last updated: Thursday 18th April 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-C23367
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy belt mount or slide. Sub-rectangular plate notcched between two concave apertures on each long edge with incised transverse line at either end. Two integral, rectangular-sectioned attachment spikes on reverse, one broken and one blunt ended bent inwards. If both spikes were complete they would have formed a rectangular loop. Plate 24 x 11mm. Internal measurements for loop 19 x 8mm.17th century.
Created on: Friday 22nd March 2013
Last updated: Friday 22nd March 2013
Spatial data recorded.