• 

  Image not taken

Record ID: NMS-CBB28B
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Flat square head, the bevelled edges damaged, two integral flat-sectioned attachment spikes on the reverse both bent in the same direction to hold a thickness of circa 2mm. Measuring 14 x 13mm. Circa 17th century.
Created on: Monday 18th January 2016
Last updated: Monday 18th January 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2C0391
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Central circular boss with multi-foil flange decorated with radiating grooves and lines in low relief. The stubs of two broken, integral attachment spikes protrude from the reverse. Diameter 25mm. Thickness (excluding spikes) 4mm. Circa 17th century.
Created on: Thursday 17th December 2015
Last updated: Thursday 17th December 2015
Spatial data recorded.

Record ID: NMS-18AEC3
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Mount or inlay. Fragment of flat-sectioned silver strip, parallel sided, broken at one end, the other end an angled concave edge with the corners broken. The upper face decorated with a flower and leaves on a field keyed for niello, much of which survives. There is a narrow, plain border around the edge without niello. On the reverse are discoloured patches probably the result of solder, with no other visible means of attachment. Surviving dimensions 21 x 12 x 1mm. Weight 1.1g. The size of the fragment has made finding parallels difficult and consequently a broad date range of 15…
Created on: Thursday 10th September 2015
Last updated: Thursday 2nd July 2020
Spatial data recorded. This findspot is known as 'Wiveton', grid reference and parish protected.

Record ID: NMS-4F5AAD
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Silver post-medieval openwork mount cast in low relief in the form of a five petalled flower with a large central hole, surrounded by five smaller five petalled rosettes connected by tendrils. The centre of each rosette is crosshatched, and each tendril has a short projection on the outer edge probably representing a thorn or leaf. On the reverse are two circular-sectioned integral attachment lugs. The impression of the cuttlefish used to cast the mount is clearly visible over the whole reverse. Both faces are in very crisp condition. Maximum external diameter 23mm. Thickness (e…
Created on: Tuesday 13th January 2015
Last updated: Monday 21st December 2015
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-4799D7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Lozengiform, the upper face cast in the form of multiple closely spaced circular bosses, creating a scalloped edge. Single rectangular-sectioned attachment spike on the reverse. Measuring 26 x 15mm. Length of spike 11mm. Circa 17th century.
Created on: Tuesday 25th November 2014
Last updated: Tuesday 25th November 2014
Spatial data recorded.

Record ID: NMS-13D010
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Post-medieval silver mount, possibly an eye-plate from dress fastener. Sub-oval plate in the form of two scrolls accentuated by a hole to either side of a central oval aperture with a short section of scalloped edge above and below. There are two integral rivets on the reverse. Circa 15th -16th century. Measuring 15 x 10mm. Weight 1.2g. Thickness of plate 1.5mm. Aperture 3 x 4mm. For broadly similar examples see SUSS-C924F4, NLM-538148, ESS-0F89E1and HESH-0E0167.
Created on: Friday 17th October 2014
Last updated: Tuesday 4th October 2016
Spatial data recorded.

Record ID: NMS-C1BBA2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Lozengiform, with decoration in relief consisting of a beaded outer border and an internal openwork cross. At one corner is a pierced projecting knop. On the reverse are two integral rectangular-sectioned attachment spikes, one broken and one bent inwards to hold a thickness of circa 2mm. Tinned. Measuring 35 x 34mm. c.17th century.
Created on: Friday 21st March 2014
Last updated: Monday 27th June 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-7F5F76
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Quatrefoil with small rounded knop separating each foil and traces of tinning. Two integral attachment spikes on the reverse bent inwards. Measuring 13 x 13mm. Circa 17th century. See also NMS-7F52B4.
Created on: Thursday 16th January 2014
Last updated: Thursday 23rd January 2014
Spatial data recorded. This findspot is known as 'Near Taverham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-7F52B4
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Quatrefoil with small rounded knop separating each foil. Two integral attachment spikes on the reverse bent inwards and retaining a fragment of possibly charred leather. Measuring 14 x 15mm. Circa 17th century. See also NMS-7F5F76.
Created on: Thursday 16th January 2014
Last updated: Monday 20th January 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-188602
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount in the form of an acorn, slightl convex on the front and concave on the reverse with the broken stubs of two circular-sectioned integral attachment spikes. Broken across the stem of the acorn. A tiny trace of gilding survives on the front face. Measuring 43 x 36mm. Circa 17th century.
Created on: Wednesday 18th December 2013
Last updated: Wednesday 18th December 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-313280
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy strap mount. Convex-sided plate with sub-triangular terminal at either end, each with radiating engraved lines. Slightly hollow-backed with two integral, circular-sectioned attachment spikes on the reverse, both broken near the base. Length 45.5mm. Width 24mm. Circa 17th century.
Created on: Monday 25th November 2013
Last updated: Friday 20th March 2020
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-A20842
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Central lozengiform plate with lozengiform aperture and flange around the edge, broken at one end, with an openwork figure-of-eight and pointed terminal at the other. On the reverse of the pointed terminal is the stub of an integral attachment spike. Surviving length 39mm (56mm reconstructed if symetrical), width 17mm. 17th century.
Created on: Wednesday 6th November 2013
Last updated: Wednesday 6th November 2013
Spatial data recorded.

Record ID: NMS-F32D63
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Late medieval or post-medieval copper alloy mount or cap. Hexagonal, with short straight sides and faceted domed top. Alternate facets are covered in black lacquer. There is no visible means of attachment. Height 16mm. Maximum diameter of base 30mm. Find F.
Created on: Tuesday 10th September 2013
Last updated: Friday 13th June 2014
Spatial data recorded.

Record ID: NMS-E297E8
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount, or unidentified object cast in low relied and consisiting of eight conjoined bosses arranged in a circle alternating between a smaller leaf or tree conected to the centre of the mount by a short stem and slightly larger cherubic human masks joined to the centre at the chin, with a resulting trinagular or teardrop-shaped aperture between each boss. There is a central, sub-oval hole. Each of the bosses is slightly hollow-backed, but there is no visible means of attachment, except for the central hole. Measuring 34 x 35mm, 3mm thick. For a similar, …
Created on: Friday 16th August 2013
Last updated: Friday 13th June 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CE0E46
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval openwork mount. Teardrop-shaped with rounded projection at one end, notched sides, central teardrop-shaped aperture, with short projections to either side before a trefoil terminal. Two integral, rectangular-sectioned attachment spikes on the reverse, one bent to touch the plate. Length 36mm. Width 15mm. c. 17th century.
Created on: Thursday 15th August 2013
Last updated: Thursday 6th March 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-8DBD13
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Post-medieval copper alloy belt or strap mount. Cast, flat sexfoil with central dome, forming a simple flower. Two broken, integral attachment spikes on the reverse. Tinned. Diameter 22mm. c. 17th century.
Created on: Monday 12th August 2013
Last updated: Monday 12th August 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-429E60
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Flat-sectioned plate, convex-sided in the centre with pointed projections to either side before heart-shaped terminals. Tinned. There are two integral, rectangular-sectioned attachment spikes on the reverse, bent inwards to hold a thickness of c.19mm. Length 41.5mm. Width 21mm. 17th century.
Created on: Friday 21st June 2013
Last updated: Friday 21st June 2013
Spatial data recorded. This findspot is known as 'Barnham Broom', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-7578A0
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Plate with median arris, trefoil at one end and rounded at the other, tinned. Two integral, broken attachment spikes on the reverse. Length 25mm. Width 10mm. c. 17th century.
Created on: Thursday 30th May 2013
Last updated: Thursday 30th May 2013
Spatial data recorded. This findspot is known as 'Rougham', grid reference and parish protected.

Record ID: NMS-FD7136
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy mount. Circular, with cast decoration in high relief consisting of a beaded border around the flanged edge and a central hexagonal boss with a hexagonal pellet at the apex. The reverse is hollow with a central, integral, rectangular-sectioned attachment spike now bent over to touch the side. Diameter 31mm. Height (excluding spike) 8mm. 17th - 18th century.
Created on: Thursday 18th April 2013
Last updated: Tuesday 6th August 2013
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D5DB67
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy belt or strap mount. Triangular plate with concave sides and trefoil terminal at either end. Two rectangular-sectioned attachment spikes broken almost flush with the plate on the reverse. Length 29mm. Width 16mm. 17th century.
Created on: Tuesday 16th April 2013
Last updated: Tuesday 16th April 2013
Spatial data recorded. This findspot is known as 'Billingford', grid reference and parish protected.