Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): 0013EE09C6F01184
    • Direction: desc
    • Object type: MOUNT

  • Thumbnail image of NMS-049B31

Record ID: NMS-049B31
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Silver grosso of Pope Alexander VI (Rodrigo Borgia), Rome, 1492-1503, adapted by the cutting out of a disc from the centre of the coin. The reason for this is uncertain; annular brooches are known which have been similarly treated but they are generally over two centuries earlier in date and have a hole drilled in the perimeter to accommodate a pin. The fashion for making annular brooches out of coins seems to have died out long before the last decade of the 15th century when this grosso was struck. It is probable that another function was intended for this large silver washer but what…
Created on: Wednesday 9th March 2016
Last updated: Tuesday 9th July 2019
Spatial data recorded.


  • Image not taken

Record ID: NMS-1A61E9
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount. Two notches in the attachment edge and two rivets, one retaining a circular rove, then tapering towards a break across a circular hole. Surviving length 15mm. Width 14mm. Probably 13th - 15th century. Finder's reference AB184.
Created on: Monday 15th February 2016
Last updated: Monday 15th February 2016
Spatial data recorded.


  • Image not taken

Record ID: NMS-CBB28B
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy mount. Flat square head, the bevelled edges damaged, two integral flat-sectioned attachment spikes on the reverse both bent in the same direction to hold a thickness of circa 2mm. Measuring 14 x 13mm. Circa 17th century.
Created on: Monday 18th January 2016
Last updated: Monday 18th January 2016
Spatial data recorded.


  • Thumbnail image of NMS-91C347

Record ID: NMS-91C347
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount. Rectangular sheet, with a repoussé border and trefoil projection at each corner, with a central dome pierced for the missing rivet. Measuring 16.5 x 17mm. Probably 14th - 15th century.
Created on: Tuesday 22nd December 2015
Last updated: Tuesday 4th April 2017
Spatial data recorded.


  • Thumbnail image of NMS-2DFC87

Record ID: NMS-2DFC87
Object type: MOUNT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy openwork mount, furniture fitting or decorative grill made from thin sheet. Broken, now triangular with two surviving sides set at slightly wider than 90 degrees, slightly raised plain repouss√© border and elaborate openwork in a D-shaped panel in the surviving corner and broken across a curved panel, perhaps circular when complete. Three empty attachment holes at the edge, one in the surviving complete corner and one next to each break. The surface is mostly a bright gold colour and uncorroded as it was found in waterlogged conditions. Surviving dimensions 54 x 53m…
Created on: Thursday 17th December 2015
Last updated: Tuesday 4th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-2C0391
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy mount. Central circular boss with multi-foil flange decorated with radiating grooves and lines in low relief. The stubs of two broken, integral attachment spikes protrude from the reverse. Diameter 25mm. Thickness (excluding spikes) 4mm. Circa 17th century.
Created on: Thursday 17th December 2015
Last updated: Thursday 17th December 2015
Spatial data recorded.


  • Thumbnail image of NMS-2BCFDE

Record ID: NMS-2BCFDE
Object type: MOUNT
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount. Domed sheet in the form of a stylised human mask with hat, notched edges forming hair and a beard, and rivets through the prominent ears (one rivet missing). Two holes form eyes, with a larger hole for the mouth, and slightly raised nose. Height 20.5mm. Width 22mm. Probably 13th - 14th century.
Created on: Thursday 17th December 2015
Last updated: Thursday 3rd January 2019
Spatial data recorded.


  • Image not taken

Record ID: NMS-5A4716
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount in the form of a stylized scallop shell. Slightly concave reverse with a single separate rivet with circular rove. Measuring 16 x 13mm. See an example from an early 15th century context in London (Egan and Pritchard, 2002, 201, fig.126, no.1083).
Created on: Monday 7th December 2015
Last updated: Monday 7th December 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-19DC7F
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy bar mount. Central pierced circular boss with tapering D-sectioned bars to either side, the ends broken. Surviving length 25mm. Width 9mm. See Egan and Pritchard (2002, fig. 134, 1154). 12th - 14th century.
Created on: Friday 4th December 2015
Last updated: Friday 4th December 2015
Spatial data recorded.


  • Thumbnail image of NMS-178AE0

Record ID: NMS-178AE0
Object type: MOUNT
Broad period: IRON AGE
County: Norfolk
Workflow stage: Published Find published
Iron Age socketed terminal mount in the form of a bull's head. Circular-sectioned socket filled with orange stained soil perhaps from iron corrosion, with four evenly spaced rivet holes between two very fine engraved lines around the edge. One of the rivet holes is broken through and there is a ragged crack extending 11mm from the edge possibly caused by internal corrosion forcing the socket apart. The socket tapers smoothly from the opening, curving at the end to form a narrow neck before the stylised bull's head, cast in the round, with horizontal horns which bend sharply up and sli…
Created on: Tuesday 22nd September 2015
Last updated: Wednesday 29th June 2016
Spatial data recorded. This findspot is known as 'Scarning', grid reference and parish protected.


  • Image not taken

Record ID: NMS-26B711
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount from harness or furniture. Slightly hollow backed, shallow D-sectioned bar, constricted with slight pointed projection to either side before expanding to form a rounded, pierced terminal with pointed projection at one end, expanding briefly before a ragged break at the other. Very worn and corroded. Surviving length 59mm. Width of bar 13.5mm. Width of terminal 17mm. 13th - 14th century. For broadly similar terminals see NMS-D9D284 (Finningham, Suffolk) and NMS-EFA631 (HER56994, Elsing, Norfolk).
Created on: Tuesday 30th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-9C7CE1
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount, binding strip or edging. Rectangular sheet, broken at one end, one long edge bent downwards with a scored line on the internal angle, engraved on the upper face with a group of three and a group of two angled lines, the upper face engraved with two longitudinal lines with two groups of three angled lines between and an empty rivet hole near one edge, ragged break at the opposite short edge. There are slight traces of probable tinning. Surviving length 21mm Width 14mm. Probably 13th - 14th century.
Created on: Monday 18th May 2015
Last updated: Tuesday 19th May 2015
Spatial data recorded. This findspot is known as 'Dunton', grid reference and parish protected.


  • Thumbnail image of NMS-4F5AAD

Record ID: NMS-4F5AAD
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Silver post-medieval openwork mount cast in low relief in the form of a five petalled flower with a large central hole, surrounded by five smaller five petalled rosettes connected by tendrils. The centre of each rosette is crosshatched, and each tendril has a short projection on the outer edge probably representing a thorn or leaf. On the reverse are two circular-sectioned integral attachment lugs. The impression of the cuttlefish used to cast the mount is clearly visible over the whole reverse. Both faces are in very crisp condition. Maximum external diameter 23mm. Thickness (e…
Created on: Tuesday 13th January 2015
Last updated: Monday 21st December 2015
Spatial data recorded.


  • Image not taken

Record ID: NMS-4799D7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy mount. Lozengiform, the upper face cast in the form of multiple closely spaced circular bosses, creating a scalloped edge. Single rectangular-sectioned attachment spike on the reverse. Measuring 26 x 15mm. Length of spike 11mm. Circa 17th century.
Created on: Tuesday 25th November 2014
Last updated: Tuesday 25th November 2014
Spatial data recorded.


  • Thumbnail image of NMS-C9BD37

Record ID: NMS-C9BD37
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Medieval silver, gilded mount. Disc, with a crowned Lombardic T in low relief on a crosshatched ground with a separate ring soldered around the edge of the upper face forming a border consisting of an internal rib and two thin external ribs either side of a deep groove containing evenly spaced pellets. There are traces of solder over the reverse and outer edge. Part of the disc and border are broken and missing. Circa 1500 - 1550. Diameter 24mm. Thickness 2.8mm. Thickness of disc (without border) 1mm. Weight 4.8g. The solder covering the reverse shows the mount was attached to a…
Created on: Friday 7th November 2014
Last updated: Thursday 13th October 2016
Spatial data recorded. This findspot is known as 'Wymondham', grid reference and parish protected.


  • Thumbnail image of NMS-13D010

Record ID: NMS-13D010
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Post-medieval silver mount, possibly an eye-plate from dress fastener. Sub-oval plate in the form of two scrolls accentuated by a hole to either side of a central oval aperture with a short section of scalloped edge above and below. There are two integral rivets on the reverse. Circa 15th -16th century. Measuring 15 x 10mm. Weight 1.2g. Thickness of plate 1.5mm. Aperture 3 x 4mm. For broadly similar examples see SUSS-C924F4, NLM-538148, ESS-0F89E1and HESH-0E0167.
Created on: Friday 17th October 2014
Last updated: Tuesday 4th October 2016
Spatial data recorded.


  • Thumbnail image of NMS-DEB91E

Record ID: NMS-DEB91E
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Medieval silver, gilded belt mount in the form of a conical sexfoil with a slightly flared base and a hole in the apex. The edge of the base has been carefully shaped with a small notch in the centre of each foil with a convex edge to either side and a slightly projecting triangular point between each foil to either side of which the edge is slightly concave. The sides are divided into six vertical facets, each decorated with a median panel of gilded crosshatching which tapers towards the apex and forms a point which meets the notch in the centre of each edge at the base. Diameter …
Created on: Tuesday 3rd June 2014
Last updated: Friday 2nd September 2016
Spatial data recorded.


  • Thumbnail image of NMS-45CA53

Record ID: NMS-45CA53
Object type: MOUNT
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Iron Age copper alloy mount, incomplete and corroded consisting of D-sectioned bar with rounded, slightly domed terminals each countersunk on the reverse and pierced for a separate copper alloy rivets which project beyond the surface on both sides, one complete and one broken. A narrow, C-sectioned projection, one broken almost flush with the edge of the bar and one now curving upwards and tapering slightly to the break, spring from the centre of each long edge of the mount. Width 25mm. Surviving length 21mm. Thickness (excluding rivets) 6mm. Length of rivet 12mm. For very…
Created on: Tuesday 27th May 2014
Last updated: Tuesday 28th June 2016
Spatial data recorded.


  • Thumbnail image of NMS-C27352

Record ID: NMS-C27352
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy mount. Thick, flat sectioned rectangular plate with and empty central hole, with a single rivet hole at each end both of which are blocked with traces of iron corrosion around them. The front is engraved with a probably foliate design between paralelle lines. Traces of silvering or tinning survive on the front and back faces. Length 44 x 12mm. 2mm thick. 13th - 14th century.
Created on: Friday 21st March 2014
Last updated: Monday 27th June 2016
Spatial data recorded.


  • Thumbnail image of NMS-C1BBA2

Record ID: NMS-C1BBA2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy mount. Lozengiform, with decoration in relief consisting of a beaded outer border and an internal openwork cross. At one corner is a pierced projecting knop. On the reverse are two integral rectangular-sectioned attachment spikes, one broken and one bent inwards to hold a thickness of circa 2mm. Tinned. Measuring 35 x 34mm. c.17th century.
Created on: Friday 21st March 2014
Last updated: Monday 27th June 2016
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 99
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 101
  • Mean quantity: 1.020
  • Maximum: 2

Filter your search

Institution

1 - 20 of 99 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.