• 

  Image not taken

Record ID: NMS-E31A44
Object type: DRESS FASTENER (UNKNOWN)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy dress fastener or toggle. Elongated domed plate with multiple transverse convex mouldings of varying widths, two rivet holes filled with iron corrosion, hollow on the reverse, with a circular terminal on a recessed neck which would have fitted into a corresponding recessed eye-plate. Similar to an example in Read (2009, 210, no.763), unclassified Type 7. Length 43mm. Maximum width of plate 10mm. Width of toggle-plate 10.5mm. Circa 16th - 17th century.
Created on: Thursday 7th July 2016
Last updated: Thursday 7th July 2016
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D017C8
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy dress fastener eye plate. Rectangular 'eye' with raised cabled bar at each short end and loop projecting from the lower edge, cusped and noted plate with two rivet holes filled with iron corrosion and a central decorative circular aperture, terminating in a straight edge with a cabled rib. Length 45mm. Width including loop 22mm. For a similar example see Read (2008, 209, no.755? Circa 16th -17th century.
Created on: Wednesday 6th July 2016
Last updated: Wednesday 6th July 2016
Spatial data recorded.

Record ID: NMS-A69F06
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy dress hook. Lozengiform plate with beaded border including three beads forming a trefoil at the corner on either side, around an openwork fleur-de-lis. Integral sharp hook and incomplete trapezoidal loop. Length 30mm. Wodth 21mm. Circa 16th - 17th century. See Read (2008, 107, no.424).
Created on: Wednesday 22nd June 2016
Last updated: Thursday 27th April 2017
Spatial data recorded.

Record ID: NMS-7F1E1C
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper alloy knife end stop in the form of an animal head, with remains of iron scale tang in slot. Blind-drilled holes pick out the animal's eyes, a transverse groove indicates the mouth and hair on the top of the head is represented by three engraved lines. On the back of the neck are a pair of engraved vertical grooves, with an angled line on each side of the neck. Length (excluding fragment of iron tang) 11mm. Width 8mm. Maximum thickness 14mm. For a similar example see NMS-AB3A65 (Norfolk HER29392).
Created on: Monday 20th June 2016
Last updated: Monday 20th June 2016
Spatial data recorded.

Record ID: NMS-7AE3B5
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval gilded silver dress fastener. Openwork plate consisting of four circular apertures around a central heart with scrolls to either side, a narrow transverse rib forming a straight edge above the heart and two pierced circular attachment lugs projecting from the lower edge below the heart. In the centre of the upper straight side is a broken, ungilded scar where a missing element, probably a pierced lug forming the eye, has broken off. Gilding on the reverse survives only within the stamped maker's mark, R. Post-medieval eye plates are less commonly found than the dres…
Created on: Monday 20th June 2016
Last updated: Thursday 6th January 2022
Spatial data recorded.

Record ID: NMS-AB3763
Object type: BODKIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval silver dress pin of the bodkin type. Rectangular-sectioned with slightly convex sides, tapering gradually from the pointed upper end to the blunt lower end. At the upper end on both faces a longitudinal groove runs through a circular piercing and rectangular slot before tapering to a point, the pin is otherwise plain. Now bent almost in half. Length (unbent) 92mm. Maximum width 4mm. Maximum thickness 2mm. Weight 3.52g. Circa 17th century.
Created on: Friday 10th June 2016
Last updated: Tuesday 21st February 2023
Spatial data recorded.

Record ID: NMS-AA0079
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval silver, gilded cap hook with circular-sectioned S-shaped hook soldered to the reverse, broken next to the edge of the plate and now separate but joining. Discoidal plate with grooves around the edge creating segmented sides and border around a slightly recessed front face which has in low relief ihc within a circular cell at the centre of a rose formed from five inner and five outer petal cells. The cells are keyed and gilded, the raised divisions between the cells, segmented border, sides, reverse and pin were either not gilded or the gilding has worn away. The cells ar…
Created on: Friday 10th June 2016
Last updated: Tuesday 6th June 2017
Spatial data recorded.

Record ID: NMS-6E189B
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval silver composite dress hook. Trefoil back-plate cusped around the edge supporting three hemispherical bosses with engraved angled lines either side of a median line to indicate a leaf on the flange between each boss. Each boss has two large filigree wire circles with pellets within and between and at the apex of each dome. A separate silver sexfoil sheet at the centre of the three bosses is secured through the back-plate by a dome-headed butterfly clip. There is a separate rectangular sectioned rectangular loop for attachment and an incomplete hook soldered to the revers…
Created on: Saturday 14th May 2016
Last updated: Monday 17th January 2022
Spatial data recorded.

Record ID: NMS-6D0C5B
Object type: SPOON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Post-medieval silver spoon knop of seal top type. From the top down; plain disc, narrow fluted baluster, constriction, tapering fluted baluster, two plain narrow mouldings, short length of hexagonal-sectioned stem before break. The end of the stem is damaged, perhaps partially molten or miscast on one side. Length (excluding surviving stem) 23.5mm. Diameter of disc 15mm. Weight 11.8g. For a very similar example on a complete spoon see Gask (1926, 88 and pl.XIII, no.3). 16th century.
Created on: Saturday 14th May 2016
Last updated: Wednesday 8th June 2016
Spatial data recorded.

Record ID: NMS-A07C7B
Object type: WHISTLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval silver possible whistle, rattle or handle. Sheet-metal tube open at one end, now broken and distorted, inserted into a separate rounded terminal with a triple moulded collar and terminating in a loop across which it is now broken. There is engraved decoration before the terminal in the form of zigzag lines with multiple closely spaced vertical lines between and crosshatched lozenges between each 'peak'. A separate circular silver plate with an off-centre hole and a scar from possible solder may originally have been attached to the open end. Three links of a copper alloy …
Created on: Wednesday 4th May 2016
Last updated: Tuesday 6th June 2017
Spatial data recorded.