Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): 0013EBA313901599
    • Page: 5

  • Thumbnail image of LIN-92AFFA

Record ID: LIN-92AFFA
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch. The frame is flat, wide, and decorated with an interior and exterior perimeter band of punched circles. These bands are interrupted in evenly spced four places by a circa 8mm wide panel of tightly incised transverse lines. The frame has a restriction for the pin. The pin is missing.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-925A07

Record ID: LIN-925A07
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early Anglo-Saxon copper alloy cruciform brooch of Martin's Group 2. The brooch has a flat rectangular headplate divided into three smaller panels through the simple scheme of raising the central panel. A half-rounded and collared integral knop is located at the top. The sides of the headplate are damaged and it is unclear, though unlikely, if further knops were present. The bow is arched and faceted at the top and bottom. A tapering panel is located below this. The foot is zoomorphic; the eyes of the beast are large and rounded. The snout is damaged, but was arched in s…
Created on: Tuesday 20th June 2017
Last updated: Monday 3rd July 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-9225DB

Record ID: LIN-9225DB
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. The brooch is complete apart from the pin. The frame is flat, circular, and decorated with a band of punched motifs, each comprising a triangle with an inwardly hooked tail extending from one corner. The frame is not restricted to take a pin, but rather appears to have had a circular hole. Iron corrosion now covers this area. Further corrosion eminating from the tip of the pin survives on the opposite side of the frame. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-91A495

Record ID: LIN-91A495
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately a sixth of the brooch survives. The fame is flat and decorated on the upper surface with a band of punched ring and dot motifs. Each motif comprises a central recessed dot surrounded by two concentric circles. The frame has a reddish patina. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-918B86

Record ID: LIN-918B86
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately half of the brooch survives. The fame is flat and decorated on the upper surface with two bands of punched triangles. Generally, both bands point inwards. Two incised transverse grooves run across the frame close to one of the breaks. This break is also possibly broken across a circular hole that would have accomodated the pin. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-91032E

Record ID: LIN-91032E
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. The brooch is complete apart from the pin. The frame is flat, circular, and decorated on the front with a band of punched circles. The frame has a restriction for the pin. To either side of this restriction the frame is decorated with a pair of incised transverse lines. Iron corrosion is visible around the restriction. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-90EF99

Record ID: LIN-90EF99
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately a quarter of the frame survives. The frame is plano-convex in section and decorated on the front with a band of ring and dot motifs. Each motif comprises a central pellet of reserve metal surrounded by two punched concentric circles. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-90E460

Record ID: LIN-90E460
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately half of the frame survives. The frame is flat and circular. The front of the frame is decorated with a band of punched ring and dot motifs. Each motif comprises a central punched dot surrounded by two concentric circles. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-90D7FB

Record ID: LIN-90D7FB
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately one quarter of the frame survives. The frame is flat and circular. Two incised transverse lines decorate the frame at the point where it is broken at one end. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Image not taken

Record ID: LIN-90CFEE
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately one quarter of the frame is missing. The frame is flat, circular, and appears to rise gently towards the centre. The frame is very worn and no decoration is visible. Close to one of the breaks is a small patch of silver or tin coloured patina. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 19th September 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-90C0FD

Record ID: LIN-90C0FD
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. The frame is flat, circular, and decorated with moulded transverse ribs. The interior perimeter contains four swellings which curve inwards. These swellings are reasonably evenly spaced around the interior. The frame is recessed to take a pin. The corroded loop of an iron pin survives in this recess. The shank is missing, but traces of iron corrosion indicative of the tip of the pin survive on the opposite side of the frame. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-90B047

Record ID: LIN-90B047
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. The frame is wide, flat, and circular, and rises very gently towards the centre. Both the interior and exterior perimeter of the upper face of the frame are decorated with a band of punched dots. The frame is recessed to take a pin. The corroded loop of an iron pin survives in this recess. The shank is missing, but the corroded tip of the pin survives on the opposite side of the frame. This item derives from a plough-damaged cemetery.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-909046

Record ID: LIN-909046
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon copper alloy annular brooch, dating to the late fifth or sixth century. Approximately half of the brooch survives. The frame is pointed oval in section, smooth, and decorated in two places with three transverse grooves.
Created on: Tuesday 20th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-8F33B6

Record ID: LIN-8F33B6
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early Anglo-Saxon pin dating to the sixth century. The pin has a flat, flared head with a circular hole in the centre that would have attached spangles. The head tapers to a swollen collar. The collar is rectangular in section, and each face is faceted resulting in a central flat lozenge with four triangular sloping corners. Each corner and each lozenge contains a deeply recessed dot. A tapering shank of circular section extends below to the break.
Created on: Tuesday 20th June 2017
Last updated: Monday 3rd July 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-7B42A2

Record ID: LIN-7B42A2
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early Anglo-Saxon copper alloy girdle hanger. The hanger has 'closed' terminals, which allows it to be assigned to Felder's Group B, specifically to subgroup VII. Only the terminal and part of the shank survive. The shank is rectangular in plan, flat, and decorated on one side only with a vertical row of punched dots. The terminal is trapezoid in plan and has inward sloping prongs. Both prongs terminate with an everted rounded end, and a segment that connects the interior of the prong to the shank. One side of the terminal is decorated. Both rounded ends each contain a …
Created on: Monday 19th June 2017
Last updated: Monday 3rd July 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-7AC173

Record ID: LIN-7AC173
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An Anglo-Saxon gilt copper-alloy Great Square Headed brooch, probably used around AD525-560. The headplate is rectangular and elaborately decorated with both punched and chip carved motifs. The headplate has an outer frame decorated with a row of punched pellet-in-ring motifs. A chip-carved geometric band comprising right angled lines runs inside this. This is bounded below by another frame decorated with with a row of punched pellet-in-ring motifs. This encloses a small rectangular panel decorated with chip-carved swirls. The bow is rectangular in plan and arched in section. A thick …
Created on: Monday 19th June 2017
Last updated: Friday 30th June 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-79D38D

Record ID: LIN-79D38D
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An Anglo-Saxon gilt copper-alloy Great Square Headed brooch. The brooch is of Hines's Informal Group, Subgroup IV (Hines 1997: 189, pl. 95b. The brooch has a rectangular headplate with a rounded, integral silvered disc in all four corners. The headplate is decorated with a large rectangular frame, which contains an abstract animal motif. The bow is square in plan, domed, and has a flat circular knop in the centre, cast integrally with the brooch. The footplate is roughly pointed oval in plan and is highly decorated with chip carved motifs. In the centre is a lozenge of reserve metal, …
Created on: Monday 19th June 2017
Last updated: Monday 3rd July 2017
Spatial data recorded. This findspot is known as 'Alford area', grid reference and parish protected.


  • Thumbnail image of LIN-E884E8

Record ID: LIN-E884E8
Object type: BOWL
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Two complete earthenware pots or bowls. The first has a wide rounded base. slightly inward angled shoulder, and slighly everted flat rim. The second bowl is similar but the shoulder is more rounded and there is no flat rim. Owing to their rounded bases, both vessels to not sit comfortably on their own. Accordingly they were probably intended to have been placed onto a concave area of ground, or perhaps held in the hands. Both vessels have a red-brown fabric reminiscent of terracotta. These two vessels do not appear to be archaeological or of local manufacture. Given this, and also th…
Created on: Monday 12th June 2017
Last updated: Monday 12th June 2017
Spatial data recorded.


  • Thumbnail image of LIN-E7E358

Record ID: LIN-E7E358
Object type: VOTIVE MODEL
Broad period: MODERN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
A modern stone votive model depicting the Hindu deity Ganesha. The model comprises a flat, domed panel with a narrow ledge at the base. The elephant-god Ganesha is depicted dancing on the ledge. Ganesha is depicted facing forwards, with his right arm is bent upwards, and his left arm down by his waist. Engraved lines decorate the back panel above the shoulders and also to the sides of the head. Further lines are seen across the waist, perhaps representing a belt or band also running diagonally down from the left shoulder. The model is in a good condition but the features are rather wor…
Created on: Monday 12th June 2017
Last updated: Monday 12th June 2017
No spatial data available.


  • Thumbnail image of LIN-A784E5

Record ID: LIN-A784E5
Object type: VOTIVE MODEL
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A greenstone votive model or abstract representation of the Hindu deity Shiva, known as a lingam (Sanskit for 'symbol'). This type of object is also known as a Shiva 'linga' or 'Shivling'. The Shiva Lingam is formed of three parts; a pedestal base, a pointed oval ledge, and a dome decorated with three horizontal lines. These are considered as Brahma, Vishnu, and Shiva respectively. Shiva Lingams or 'shivlings' can occur as natural objects, such as domed stones, or as votive models used for worship in temples or smaller shrines. Shivlings are holy symbols of the Lord Shiva that are c…
Created on: Friday 9th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 19,017
Search server index: objects

You are viewing records: 81 - 100.

Search statistics

  • Total quantity: 26,799
  • Mean quantity: 1.409
  • Maximum: 998

Filter your search

81 - 100 of 19,017 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.