• 

  Image not taken

Record ID: NMS-5767C8
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval silver coin of Henry I, Quatrefoil with piles type, moneyer Wulfrard of Sandwich, North 863, weight 1.36g, c.1111
Created on: Thursday 28th March 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: NMS-99877A
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Medieval silver annular brooch, complete with silver pin. The frame of the brooch is circular, thick and flat to make a rectangular cross-section. The pin is held in a constriction, and has an open loop. There is a transverse double moulding at the junction of loop and shaft, below which the cross-section of the shaft is D-shaped or trapezoidal.  The frame is engraved on both faces with letters which read clockwise from the pin constriction. Because the pin has a clear front and reverse, it is possible to identify the front and reverse of the frame too; the…
Created on: Wednesday 13th December 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-6858CD
Object type: DRESS FASTENER (DRESS)
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Incomplete silver mount or dress fastener. One half (the lower half) is flat and undecorated with a curving lower edge. The other half has decoration of two high-relief C-shaped scrolls with their backs towards the flat half and their points upwards The point of one scroll has been lost, but the surviving scroll is open at the top, and appears to be in the shape of a flat ribbon which is wound up at either end, and the inner end bound to the inner end of the other scroll. Between the two scrolls, and partly within both halves, is a sub-oval o…
Created on: Monday 23rd October 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-02D016
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Description: Late medieval gilded silver strap-end of hollow box form, decorated on both front and back. It appears to have been made from four pieces of silver soldered together, with no evidence of an internal spacer plate. The strap-end tapers slightly from the open end, and has a pair of concave curves running to a point at the closed end. There are two silver rivets at the open attachment end, The sides of the strap-end are undecorated but all surfaces (apart perhaps from the rivets) are gilded. The front is decorated with a rectangular frame made from a groove aro…
Created on: Friday 6th October 2023
Last updated: Wednesday 14th February 2024
Spatial data recorded. This findspot is known as 'Roudham and Larling', grid reference and parish protected.

Record ID: NMS-F720E6
Object type: FINGER RING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Gilded silver finger-ring of 'iconographic' type, with clasped hands on the hoop. It is a fairly large ring, with the hoop generally of D-shaped cross-section. The gilding survives very well on both interior and exterior, with just a few areas (mainly around the edges) worn to show the underlying silver. The bezel is roughly triangular in cross-section, and is divided into two longitudinal concave fields with a central ridge. Each field is decorated with a crudely engraved human figure in three-quarter pose looking slightly towards the central ridge. They see…
Created on: Wednesday 30th August 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-5E1D57
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Description: Medieval gilded silver seal matrix of unusual form and fine craftsmanship. It is circular, thick and flat, with a recessed reverse. The die has a complicated central motif, described from the impression. On the left is the standing figure of the Madonna or Virgin Mary, with the Christ Child held in her arms towards the centre of the matrix. She is crowned and her face is towards the viewer, with hair or a veil to the sides; her right arm is bent across her body, and she has an obliquely draped skirt. The child is held in her left arm and his head is in side view,…
Created on: Thursday 18th May 2023
Last updated: Wednesday 8th November 2023
Spatial data recorded.

Record ID: NMS-3AB171
Object type: PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Silver cross-shaped pendant of medieval date, with AGLA inscription. It has a central thick flat circular lobe and four oval-section arms. Three of the arms end in globular knobs; the upper arm has a similar knob, but then continues to a large, probably soldered-on oval loop, pierced from side to side. The central lobe has engraved decoration on both faces, consisting of a circular border with letters within. On the front the letters read AG, with the G suffering from corrosion, and on the reverse they read LA, with the A being turned at right angles so…
Created on: Thursday 4th May 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-403598
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval gilded copper-alloy buckle plate with worn, corroded decoration, probably of a wyvern. It is roughly square (20.8mm wide and 19.0mm long) with two projecting hinge loops, both of which are broken. The front is decorated with a bird-like animal in profile facing right (towards the attachment end) originally apparently engraved and gilded, but not enamelled. Much of the surface is now missing, but the remains of oblique or zig-zag lines can be seen at either end, probably the remains of rocker-arm engraving. The centre of the plate is filled with the bird or animal, which …
Created on: Wednesday 29th March 2023
Last updated: Thursday 4th May 2023
Spatial data recorded.

Record ID: NMS-078751
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Medieval silver annular brooch. The frame is small, circular and a low D-shape in cross-section, with a constriction for the pin. It is now bent, broken across the constriction, and the pin is missing. The frame is decorated on the convex front with engraved and stamped decoration; held with the constriction at the top and reading anti-clockwise, the engraving consists of a transverse groove, then four saltires, then a half-saltire ending in a D-shaped recess. The lozenges and triangles thus formed are filled with triangular and sub-triangular punchmarks which se…
Created on: Thursday 2nd March 2023
Last updated: Wednesday 11th October 2023
Spatial data recorded.

Record ID: NMS-070E37
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Fragment of medieval silver annular brooch, with a slim circular-section frame interrupted by two small irregular bosses both decorated with annulet stamps giving a 'brambled' effect. Both breaks are immediately after the boss and both are granular and unworn. The frame is now bent so that it is difficult to suggest an original diameter. Dimensions: Length of fragment, 25mm. Diameter of frame between bosses, 1.8mm. Thickness of bosses, 3-4mm. Weight 0.9g. Discussion: This type of annular brooch, with a circular wire frame interrupted by normally four bramble…
Created on: Thursday 2nd March 2023
Last updated: Wednesday 11th October 2023
Spatial data recorded.

Record ID: NMS-38F2DE
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Description: Tiny silver medieval annular brooch. It has an almost circular, D-section frame with a constriction for the silver pin. Opposite this is a pin rest, and both pin constriction and pin rest are flanked by animal heads pointing towards them, perhaps intended as biting at them. Each of the four animal heads has relief ears, eyes made from annulet punches, and nostrils made from single dots. If the pin constriction is held at 12 o'clock, then at 9 o'clock and 3 o'clock is a slightly expanded raised oval zone of oblique grooves wit…
Created on: Monday 20th February 2023
Last updated: Monday 18th September 2023
Spatial data recorded.

Record ID: NMS-7DD71B
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Lead spindle whorl, 31-32mm in diameter and 11-12mm tall. It has a flat underside, with a slight concentric groove, and a smoothly domed top which is decorated with five evenly spaced curving radial ribs or ridges, each c. 2-3mm wide. The central perforation is almost cylindrical, flaring a little from c. 9.5mm at the top to c. 10mm wide at the bottom. It weighs 57.2g.  Excavated parallels with good dates are few, but seem to centre on the late medieval period, perhaps 14th or 15th century.
Created on: Monday 30th January 2023
Last updated: Monday 17th April 2023
Spatial data recorded.

Record ID: NMS-7DA399
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper-alloy medieval annular brooch, now very corroded and with much of its surface missing. The frame is 30.1mm in diameter, and was originally rectangular in cross-section, with rounded corners; where it survives best the frame measures 4.7mm wide and 3.0mm thick. It is undecorated, but has a pin constriction 3.3mm wide and a short, V-shaped nick forming a pin rest opposite this. The pin does not survive. It weighs 5.2g. It is fairly similar in proportions to a decorated copper-alloy annular brooch found in a context of c. 1270-1350 in London (Egan and Pritchard 1991, no. 1313).
Created on: Monday 30th January 2023
Last updated: Monday 17th April 2023
Spatial data recorded.

Record ID: NMS-188BC9
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper-alloy book clasp of Howsam's type A.3, made from a thin strip of copper-alloy sheet mostly 14.2mm wide, with one end flaring to 15.4mm wide before being broken. The break is across the outer of two concentric grooves around a rivet hole (blocked with iron corrosion), with a second similar motif around a second rivet hole in the centre of the clasp. The other end of the clasp has a flat, slightly tapering, turned-under hook. It has further decoration of three transverse rows of fine rocker-arm ornament between the central circles and the hook, with a V shape of…
Created on: Friday 13th January 2023
Last updated: Friday 25th August 2023
Spatial data recorded.

Record ID: NMS-EC89F6
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Cast copper-alloy leg from a medieval cooking vessel. It is roughly rectangular in cross-section, 32 x 14mm at the break, with a very slight midrib down the centre. It flares smoothly to the out-turned foot, and there is no break between the two. The foot is triangular in side view, with a trapezoidal base 39mm wide at most and 22mm deep. It is 47mm long and weighs 109.5g. There is no particularly close parallel in Butler and Green 2003; it is fairly similar to one from a 14th-century context in Winchester (Biddle 1990, no. 3386).
Created on: Wednesday 11th January 2023
Last updated: Wednesday 18th January 2023
Spatial data recorded.

Record ID: NMS-EC471B
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Part of a medieval gilded copper-alloy strap fitting, probably from horse-harness. It consists of a single rectangular plate, 9mm wide and 2.5mm thick, slightly rounded on the front and flat on the reverse, with half of a rounded loop at one end which appears to have worn through. The plate has two circular rivet holes through it, one at either end. The object is very corroded, but the angle between plate and loop has preserved some surface, and there is a little around the upper rivet hole, and some on the reverse too. There are traces of gilding around the rivet hole. …
Created on: Wednesday 11th January 2023
Last updated: Thursday 19th January 2023
Spatial data recorded.

Record ID: NMS-EBEB52
Object type: STRAP END
Broad period: MEDIEVAL
Workflow stage: Awaiting validation
Medieval strap-end made from two thin sheets of copper alloy cut to approximately the same shape and size, and fastened with a separate small neat copper-alloy rivet at either end. It tapers from 14.0mm at the open end to 10.6mm wide just before a five-lobed terminal. The two lobes closest to the rest of the strap-end are quite deep and almost rectangular, but the other three are rounded and form a trefoil. Length 45.6mm, weight 4.3g. 14th century.
Created on: Wednesday 11th January 2023
Last updated: Wednesday 18th January 2023
No spatial data available.

Record ID: NMS-D815F6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval gilded copper-alloy buckle plate, now incomplete. The flat D-shaped upper plate survives, broken at the hinge loops and now bent. It is decorated with a border of engraved ladder pattern made up of a double border with transverse lines between, forming squares. This border runs in a straight line across the plate behind the pin slot, and then hugs the curved edge. Within the border are three rivet holes, two of which retain copper-alloy rivets with slightly convex round heads. The plate has a rough brown surface with patches of green, and traces of gilding. Length c…
Created on: Tuesday 10th January 2023
Last updated: Wednesday 18th January 2023
Spatial data recorded.

Record ID: NMS-D6903A
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval gilded copper-alloy horse-harness pendant, now very worn. It is in the shape of an upside-down fleur-de-lis, with a suspension loop projecting from the top (the centre of the stem). The loop is pierced from side to side, although the small hole is now blocked with copper-alloy corrosion. The body of the pendant is thin and flat, slightly convex on the front and concave on the reverse. Much of the edge is missing, but the fleur shape, with side lobes incurved on their undersides, is clear. No decoration survives apart from small patches of gilding. Length 36.1g,…
Created on: Tuesday 10th January 2023
Last updated: Wednesday 18th January 2023
Spatial data recorded.

Record ID: NMS-C98E64
Object type: MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Piece of copper-alloy binding strip or mount, probably from furniture, a box or casket, or similar. It is D-shaped in cross-section, with a flat reverse and curved top. It is broken at both ends and has vaguely zoomorphic decoration. Surviving length 75mm, width of wider part 13mm, maximum thickness 5.3mm, weight 16.3g.  At one end it is broken across a circular rivet hole c. 3mm in diameter; here the break seems fairly fresh. The hole has punched dots around it and there is a trace of an oblique groove. There is then an undecorated area c. 25mm long, with a similar rivet hole ne…
Created on: Friday 16th December 2022
Last updated: Thursday 20th April 2023
Spatial data recorded.