Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): 0013EA168E00197F
    • Page: 3

  • Thumbnail image of CAMHER-860E56

Record ID: CAMHER-860E56
Object type: JETTON
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Jetton of Rose/orb type, very worn and with fragmentary edges. Issued by Hans Krauwinckel II, working 1586-1635.
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-ECF650

Record ID: CAM-ECF650
Object type: RING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy ring, diameter 20 mm externally and 12 mm internally. In cross-section it is a slightly flattened circle, 3 x 4 mm. The ring has one point of considerable internal wear and has a nice mid green patina. Possibly a medieval buckle or brooch frame.
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-ECCD27

Record ID: CAM-ECCD27
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy buckle frame with integral forked spacer plate. The frame is oval, with a pointed (but not grooved) projection at the pin rest; the frame has bevelled edges throughout with visible filemarks. The forked spacer has traces of solder on both faces where the decorative top and bottom plates were attached, and a slot forming a bar over which the pin could swivel. Length 40 mm, width of frame 22 mm, width of spacer plate 13mm, weight 3.7g. This buckle type dates to the 14th century.
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-EC8032

Record ID: CAM-EC8032
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Long D-shaped copper-alloy buckle frame, now worn and bent. The bar was originally straight, and the sides have the vestiges of transverse ridges near the bar. In the centre of the curved outer edge is a large collared knop. This buckle frame is similar to one from London which was found in a deposit dated to c. 1300 to c. 1350 (Egan and Pritchard 1991, no. 421); there are also several from Meols (Egan in Griffiths et al. 2007, nos. 622-5).
Created on: Tuesday 28th July 2009
Last updated: Wednesday 14th March 2018
Spatial data recorded.


  • Thumbnail image of CAM-EC44E7

Record ID: CAM-EC44E7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small oval copper-alloy buckle frame, with a narrowed offset bar and quarter-circle cross-section. There is a lobe at either end of the bar and patches of iron staining all over frame and bar. It measures 15 mm long by 18 mm wide, and weighs 2.58g. This buckle frame is similar to one from London which was found in a deposit dated to c. 1270 to c. 1350 (Egan and Pritchard 1991, no. 274).
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-EBF632

Record ID: CAM-EBF632
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small D-shaped copper-alloy buckle frame with narrowed bar. The frame is a flattish oval in cross-section, with a well-preserved shiny white-metal coating on the reverse which has completely worn off the upper surface. There are also filemarks on the reverse. This buckle frame is similar to one from London which was found in a deposit dated to c. 1330 to c. 1380 (Egan and Pritchard 1991, no. 420).
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-895E77

Record ID: CAM-895E77
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small copper-alloy buckle frame, D-shaped internally; the outer edge has a central grooved projection forming the pin rest. There is a moulding across one side near the bar, but this has no pair across the other side. There are traces of a black coating, perhaps black ‘lacquer’ (a linseed oil coating). It measures 16 mm long and 19 mm wide, and weighs 1.31g. This is a rather amateurish copy of the ‘lipped’ buckle frames from London, found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 306-310). The moulding on the side near the bar is also found o…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-893566

Record ID: CAM-893566
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small copper-alloy buckle frame, oval internally with an offset straight bar; the outer edge is pointed externally and has a grooved pin rest. The loop of a copper-alloy pin survives on the bar, with a groove across at the junction of the loop and shaft. White-metal coating over all surfaces of both frame and pin. It measures 15 mm long and 15 mm wide, and weighs 1.21g. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 306-310).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-891616

Record ID: CAM-891616
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Flimsy oval copper-alloy buckle frame. The frame has an offset bar; the outer edge is thickened into an ornate solid pointed shape which is decorated on one face with grooves. The decoration is not symmetrical; there is a central grooved pin rest, and to one side a groove in front of a moulding and to the other side a groove in front of a double moulding. The straight bar has wear marks from a plate. The buckle frame is 21 mm wide and 17 mm long and weighs 1.37g. It is similar to a buckle from a late 14th-century context in London (Egan and Pritchard 1991, no. 297).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-88D8F2

Record ID: CAM-88D8F2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame and part of plate. The frame has an offset straight bar; the outer edge is thickened into a roll-moulding with a recess in the centre holding a separate sheet roller. The roller is now corroded into position; it has a central grooved pin rest running around both faces. The remains of a copper-alloy plate are wrapped around the bar. This has frame recesses cut into either corner, and a slot for the pin, and two separate copper-alloy rivets. Both upper and lower plates are broken at the rivet holes. The plate is a maximum of 14 mm wide and the survivin…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-88A882

Record ID: CAM-88A882
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame with offset straight bar. The outer edge is thickened into a roll-moulding with a recess in the centre holding a separate sheet roller. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 298, 301, 315, 317).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-887201

Record ID: CAM-887201
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Neatly made oval copper-alloy buckle frame with offset straight bar bearing traces of an iron pin. The outer edge is thickened into a roll-moulding with a recess in the centre holding a separate sheet roller. The roller is decorated with longitudinal ribbing and there is a patch of iron corrosion on it, presumably from the pin. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 298, 301, 315, 317).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-883DA6

Record ID: CAM-883DA6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Neatly made oval copper-alloy buckle frame with offset straight bar. The outer edge is thickened into a roll-moulding with a recess in the centre which would originally have held a separate sheet roller. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 298, 301, 315, 317).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-87F902

Record ID: CAM-87F902
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame with straight bar. The outer edge is thickened into a flattened roll-moulding decorated on one face with a series of transverse grooves. Two in the centre form a pin rest, and there is a further groove close to each corner. The bar, and the sides of the frame, are very worn. Similar buckles from London date from the late 12th to the late 14th century (Egan and Pritchard 1991, p. 76).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-87C954

Record ID: CAM-87C954
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame with straight offset bar. The outer edge is thickened into a flattened roll-moulding decorated on both faces with a series of transverse ridges. Two in the centre form a pin rest, and then there is a slightly smaller pair to either side. The corners of the roll-moulding are slightly thickened. The bar has a slight hump in the centre, caused by wear from a plate. Similar buckles from London date from the late 12th to the late 14th century (Egan and Pritchard 1991, p. 76).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-878997

Record ID: CAM-878997
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Almost circular copper-alloy buckle frame with central bar and iron pin. The cross-section throughout the loops and bar is circular; the pin survives well. A similar copper-alloy/iron buckle from London is thought to be from a spur, and was found in a deposit dating to c. 1350-c. 1400 (Egan and Pritchard 1991, no. 214).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-86A5C7

Record ID: CAM-86A5C7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of copper-alloy buckle from a sword belt. The lower edge survives, together with part of the central bar, which ends in an integral suspension loop turned at right angles; this suspension loop would originally have held a hook fixed onto a scabbard. The buckle would originally have had two rectangular loops, and as the lower corner of one survives, an original length of c. 32 mm can be reconstructed. The cross-section of the surviving loops, and the suspension loop, is rectangular; the cross-section of the bar is roughly circular. The fragment weighs 3.99g. Sword belts wi…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-867454

Record ID: CAM-867454
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, both loops probably originally identical, but one now almost completely missing. The surviving loop is kidney-shaped, i.e. oval with an incurved outer edge, and is a flattish oval in cross-section. The centre of the outer edge is embellished with a broad moulding at the pin rest. The bar projects slightly beyond the frame, and a copper-alloy pin survives; the pin is very simple, with one end pointed and the other wrapped around the bar. Maximum width 32 mm; original length c. 43 mm; length of pin 23 mm. Weight 5.35g. Late medieval or early…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-863783

Record ID: CAM-863783
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, one loop trapezoidal and one loop D-shaped. Both loops are triangular in cross-section; the central bar projects beyond the frame. Pin missing. Maximum width (across bar) 17 mm; length 22 mm. Weight 2.47g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-85CA81

Record ID: CAM-85CA81
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, both loops originally oval; one loop now largely missing. Surviving loop is a low D shape in cross-section. A copper-alloy pin survives on the central bar, with one end wrapped around to form a simple loop and the other end pointed. There is a slight swelling at the junction of loop and shaft, and the pointed end would have rested on the missing outer edge. Width 24 mm; original length c. 32 mm; length of pin 18 mm; surviving weight 2.6g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 3,531
Search server index: objects

You are viewing records: 41 - 60.

Search statistics

  • Total quantity: 5,041
  • Mean quantity: 1.428
  • Maximum: 262

Filter your search

41 - 60 of 3,531 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.