• 

  Image not taken

Record ID: NMS-E39636
Object type: KNIFE
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Iron strip, perhaps the blade from a knife. It is 120mm long and one end is encased in delaminating corrosion. Away from this end, it is generally around 19mm wide, with one edge straight and 3mm thick, tapering to the other edge which may represent the cutting edge. The end without the corrosion layers has the cutting edge curving up to meet the back of the blade in a rounded point. The corroded end is broken and has no evidence of a whittle tang. The strip is now bent at a slight angle about halfway along its length. It weighs 45.0g. The identification as a knife is very t…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E36935
Object type: RING
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Neatly circular iron ring, 51.5mm in diameter. In cross-section it is circular, 8mm in diameter. It weighs 31.8g. The ring was found close to several early Anglo-Saxon objects and is likely also to be of that date. It may have been used as a suspension ring.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E3383A
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation
Fragment of late Iron Age copper-alloy D-shaped terret, now very corroded but perhaps originally enamelled. It has a sub-circular or slightly oval upright collar terminal 13.7mm wide, 12.1mm tall and 4.8mm thick. From one side of this projects a triangular-section upper ring, with a flat inner and an angled outer. On the other side of the collar, at its base, is a stub of the attachment bar which shows that this was rectangular-section, 6.5 x 3.4mm, and set vertically. The overall length is 21.0mm and it weighs 7.34g. All surfaces of the fragment, including the breaks,&…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D2C402
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
About half of the flat circular frame of an early Anglo-Saxon copper-alloy annular brooch, with an original diameter of c. 40mm. One break is across a neat rounded hole in the frame. This may be the pin hole, but on the reverse there is solder around the hole and it may possibly alternatively be a repair. There is also some iron corrosion on the reverse here, which could be from the pin. The frame is otherwise well preserved here, and at 6.1mm wide appears to retain its original width. The inner edge is 1.2mm thick and it tapers towards the outer edge which is 0.6mm thick. Th…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D16462
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of copper alloy, probably a small piece of foot from an early Anglo-Saxon cruciform brooch. The fragment is C-shaped in cross-section, hollow on the reverse, and is broken at both ends (one break fairly fresh and granular, the other more worn). At one end, the front has a bold moulding, 4-5mm deep and flat-topped, which is divided into two by an off-centre transverse groove. The overall surviving length is 21.1mm, maximum width 12.8mm and maximum thickness (at moulding) 6.0mm. It weighs 4.93g. It seems likely that this is one of the mouldings at the top of a horse's …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0E282
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat, apparently undecorated headplate has a sub-rectangular central panel with three flat 'knobs', all of which appear to have been mushroom-shaped, or D-shaped above narrowed waists. This shape of headplate is often known as 'trefoil'. On the reverse of the headplate is a broken pin bar lug (worn breaks) with iron staining around it. All the edges of the headplate are worn. The bow is D-shaped in cross-section, quite highly arched and simple, with a groove across the top the onl…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0BB0C
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat headplate is very worn and its original shape is uncertain, but it has the remains of deep U-shaped cut-outs in both its lower edge and its upper corners, forming three knobs. These may have had straight ends, as the top and one side knob each retain a straight row of crescentic stamps along their edges. On the reverse of the headplate is a large double pin bar lug, one lug incomplete and the other retaining part of an iron pin bar. There is extensive iron corrosion between the two lugs.  The bow…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D07466
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Complete early Anglo-Saxon copper-alloy small-long brooch, now in two joining parts. The head is of the 'cross potent' type, with a flat rectangular central panel c. 13 x 18mm. This has three sub-rectangular flat 'knobs' attached by narrower waists, to form a headplate in total 32.2mm wide. The surface is corroded and some is missing, but traces of double-crescent or half ring-and-dot stamps can be seen; there is a row of five on the top knob and a similar row on one side knob, each with a trace of a single groove outside the row of stamps. On the reverse of the headpla…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D012DB
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of early Anglo-Saxon copper-alloy girdle-hanger. Using Felder's terminology (2014, 35, fig. 3.1), the fragment consists of the suspension loop, shank neck and part of shank, with a granular, unworn break. The suspension loop is a narrow, rounded lobe at the top, pierced from side to side, but the perforation is now blocked with iron corrosion. The shank neck is a D-section area below the suspension loop, divided into five rounded lobes; its junction with the shank is marked with a transverse ridge. The shank itself is rectangular-section and flares very slightly …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CF59E4
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Chunky copper-alloy bar from an early Anglo-Saxon wrist-clasp, apparently of Hines Form B10 or possibly alternatively B4. The bar is cast in one piece, with three cuboidal elements, one in the centre and one at either end. These are linked by D-section areas, each one decorated with two broad U-section transverse grooves or flutes, alternating with three ridges each flanked by narrow grooves. Each of the cuboidal bosses has a substantial white-metal coating, probably of tin. On the flat reverse there are two broken pierced lugs, set transversely and pierced longitudinally. Length 40.3…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CE5E22
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Early Anglo-Saxon copper-alloy wrist-clasp of Hines's Form B20, in very good condition. It is largely flat, and cast in one piece, with a raised, flat-topped bar, a plate with shaped rear edge, and a complete loop. The bar is c. 6mm wide and has two zones of transverse groove decoration, not perfectly evenly spaced along its length; both consist of a wider U-section groove flanked by two similar slightly narrower grooves. The rear edge of the bar has a longitudinal step intermediate in height between the bar and the rest of the plate. The rear edge of the plate is flatte…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-5767C8
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval silver coin of Henry I, Quatrefoil with piles type, moneyer Wulfrard of Sandwich, North 863, weight 1.36g, c.1111
Created on: Thursday 28th March 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: NMS-FDD7E8
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
 Gold mourning ring dated 23 September 1805. The ring has a wide hoop, of even width throughout but now crumpled in one place. It is decorated on the exterior with a beaded ridge to top and bottom, two plain ridges within this, and a central band of relief lettering reading ELIZ: SHERMAN. DIED. 23. SEP: 1805. AGED. 81 The stops vary, sometimes colons but mostly central pellets. There is a space-filling motif, probably a rosette or flower, between the start and end of the inscription. Although the lettering is very neat, the workmanship is untidy, with lots of engraving scrat…
Created on: Thursday 11th January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.

Record ID: NMS-1C4BD7
Object type: FINGER RING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Description: Fragment of Roman silver finger-ring, bezel and shoulders only. The bezel is oval or lozengiform, with a raised solid roundel in the centre. This central flat-topped boss is engraved with a cross within four oblique lines making up a lozenge. There is a narrowed waist between the bezel and each shoulder, below which the shoulders are triangular, tapering into the hoop. They are each decorated at the top with a transverse line of ladder pattern, which is almost worn away on one shoulder. The edges of the shoulder, as they taper into the hoop, a…
Created on: Tuesday 19th December 2023
Last updated: Tuesday 12th March 2024
Spatial data recorded. This findspot is known as 'Spooner Row', grid reference and parish protected.

Record ID: NMS-9AC40C
Object type: CUFF LINK
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: 17th-century silver cufflink element decorated with crowned hearts, together with the oval wire loop that originally joined it to the other element. It is circular, originally with a flat centre and a shallow downturned rim with an out-turned edge. The rim is now bent and cracked. The flat area has a recessed centre enclosed within a raised edge. The centre has a stippled background, a pair of counter-relief heart shapes, one next to the other, and a crown over both. The crown is neatly made, with a wide lower band decorated with four dots, a…
Created on: Wednesday 13th December 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-99877A
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Medieval silver annular brooch, complete with silver pin. The frame of the brooch is circular, thick and flat to make a rectangular cross-section. The pin is held in a constriction, and has an open loop. There is a transverse double moulding at the junction of loop and shaft, below which the cross-section of the shaft is D-shaped or trapezoidal.  The frame is engraved on both faces with letters which read clockwise from the pin constriction. Because the pin has a clear front and reverse, it is possible to identify the front and reverse of the frame too; the…
Created on: Wednesday 13th December 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-EFEE71
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Small flat silver book-clasp of post-medieval date. It is neatly made from thick silver sheet, rounded at both ends and with a concave waist in between. A flat turned-under hook has been broken at one end, which has shoulders curving down into the waist. There is a tiny pointed angle between the waist and the other rounded end, which is oval, slightly larger, and set transversely. This end has a hole, neatly lozengiform on the front and circular on the reverse, presumably for attachment to a strap. The hole is now filled with greenish corrosion on …
Created on: Tuesday 5th December 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-5DCF04
Object type: NEEDLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Complete post-medieval silver needle or bodkin with one pointed end and one pierced end. It has a circular cross-section for most of its length, and then flattens and widens at the top to a round-cornered rectangle through which a hole has been made. The top of the hole is rounded, mirroring the top of the needle, but the lower end of the hole tapers to a point.  The needle is decorated with two sets of double grooves around the entire circumference, one near the pointed tip and one about halfway up the shaft. Just below the hole, where the shaft begins to flatt…
Created on: Tuesday 28th November 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-6858CD
Object type: DRESS FASTENER (DRESS)
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published
Description: Incomplete silver mount or dress fastener. One half (the lower half) is flat and undecorated with a curving lower edge. The other half has decoration of two high-relief C-shaped scrolls with their backs towards the flat half and their points upwards The point of one scroll has been lost, but the surviving scroll is open at the top, and appears to be in the shape of a flat ribbon which is wound up at either end, and the inner end bound to the inner end of the other scroll. Between the two scrolls, and partly within both halves, is a sub-oval o…
Created on: Monday 23rd October 2023
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NMS-02D016
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Description: Late medieval gilded silver strap-end of hollow box form, decorated on both front and back. It appears to have been made from four pieces of silver soldered together, with no evidence of an internal spacer plate. The strap-end tapers slightly from the open end, and has a pair of concave curves running to a point at the closed end. There are two silver rivets at the open attachment end, The sides of the strap-end are undecorated but all surfaces (apart perhaps from the rivets) are gilded. The front is decorated with a rectangular frame made from a groove aro…
Created on: Friday 6th October 2023
Last updated: Wednesday 14th February 2024
Spatial data recorded. This findspot is known as 'Roudham and Larling', grid reference and parish protected.