Back to simple search | Back to advanced search

    You searched for:

    • Recorded by (obfuscated for security): 0013EA168E00197F
    • Broad period: MEDIEVAL
    • Show this many records per page: 100

  • Thumbnail image of NFAHG-C241B0

Record ID: NFAHG-C241B0
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy seal matrix with socket, for producing cloth seals (alnage seals). The die itself is circular and 29mm in diameter. In side view, the matrix rises vertically from the die for about 3mm then begins to taper with a slightly concave curve to an open end 19-20mm in external diameter. The matrix is overall 14mm thick and weighs 39.0g. There are two small bumps on the outside, very close to the socket's edge, which are surrounded by iron staining and which may be the remains of iron nails fastening a wooden handle. These are not quite opposite each other; one is above the C in …
Created on: Friday 2nd November 2018
Last updated: Tuesday 20th November 2018
Spatial data recorded.


  • Thumbnail image of CAMHER-87D615

Record ID: CAMHER-87D615
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Strap fitting made from two tapering pieces of copper alloy sheet, held together by a copper-alloy rivet at the apex and a second in the centre of the wider end. One plate is decorated with incised lines; it appears to have a double line across the middle dividing it into two small panels, the wider of which at least seems to have a border around. Within each panel is a double-line saltire (diagonal cross). The edges are rather abraded and quite a bit of surface is now missing. 10 mm wide, 18 mm long, rivet c. 2 mm thick. 0.87g. Medieval, probably 13th or 14th century.
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAMHER-87C1F4

Record ID: CAMHER-87C1F4
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete strap fitting made from copper-alloy sheet. The fitting is 12 mm wide at the attachment end and has a single central rivet hole here; it then continues to a loosely bent fold where the corners are obliquely trimmed, suggesting that the fold was designed to hold or link to another element. The object is broken at the fold. The fitting is decorated with fine incised lines; there is a pair of transverse lines at the attachment end and near the fold, with a saltire (a diagonal cross) in between. Surviving length19 mm; weight 0.88g. Medieval, probably 13th or 14th century.
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAMHER-87B132

Record ID: CAMHER-87B132
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Strap fitting made from a single slightly tapering sheet of copper alloy, bent in half and originally secured at the wider end by a single rivet, now missing. There is a wide gap at the central fold and the corners here have been obliquely trimmed, suggesting that the fold was perhaps intended to suspend something like a pendent mount or to hold something like a strap clasp. The fitting is decorated on the front half with a saltire (a diagonal cross) made up of neatly engraved zig-zag or rocker-arm ornament. The backplate is undecorated and is slightly narrower than the front. Maxi…
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAMHER-879EC6

Record ID: CAMHER-879EC6
Object type: PURSE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Purse Hanger Small copper-alloy purse hanger, or arched pendent mount, from a belt. There is a central lobe divided from two arches by engraved oblique lines. One of the arches is now largely missing (fresh break) but the other is complete, and ends in a horizontal bar with a small ridge on the lower edge, set slightly in from the end, forming a hinge which would have swivelled on a mount. Surviving width 34 mm; probable original width c. 46 mm. Top to bottom, 13 mm. Thickness, 2 mm. Weight, 1.78g. These purse hangers date to the middle of the 13th century (Egan and Pritchard …
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAMHER-878075

Record ID: CAMHER-878075
Object type: STRAP END
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Cast copper-alloy forked spacer plate from a composite strap-end, now incomplete. One arm is largely missing, and the other is also probably incomplete, although the break is old. The arms have traces of solder on each face, and form a straight or slightly tapering shape with a pointed end. In the centre of the pointed end is a large flattish knop, with a collar beneath. The knop consists of a flared moulding with a second moulding and then a terminal beyond; this was probably intended to represent an acorn in its cup. There is a casting flaw on one face, resulting in the collar be…
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAMHER-86EBF0

Record ID: CAMHER-86EBF0
Object type: ANNULAR BROOCH
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of flat annular brooch, made from copper alloy and decorated on both faces. At one end the brooch has broken at the pin constriction, and a tiny stub of the bar on which the pin originally hinged can be seen on the edge of the object. At the other end the oblique break is fairly worn. On one face, the panel of decoration is enclosed within a groove, leaving a reserved border around three edges. It seems to represent fronds of stylised leaves. On the other side, there is a narrower reserved border around three sides, but the panel is divided into two narrow bands by a cent…
Created on: Tuesday 4th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-ECF650

Record ID: CAM-ECF650
Object type: RING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy ring, diameter 20 mm externally and 12 mm internally. In cross-section it is a slightly flattened circle, 3 x 4 mm. The ring has one point of considerable internal wear and has a nice mid green patina. Possibly a medieval buckle or brooch frame.
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-ECCD27

Record ID: CAM-ECCD27
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy buckle frame with integral forked spacer plate. The frame is oval, with a pointed (but not grooved) projection at the pin rest; the frame has bevelled edges throughout with visible filemarks. The forked spacer has traces of solder on both faces where the decorative top and bottom plates were attached, and a slot forming a bar over which the pin could swivel. Length 40 mm, width of frame 22 mm, width of spacer plate 13mm, weight 3.7g. This buckle type dates to the 14th century.
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-EC8032

Record ID: CAM-EC8032
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Long D-shaped copper-alloy buckle frame, now worn and bent. The bar was originally straight, and the sides have the vestiges of transverse ridges near the bar. In the centre of the curved outer edge is a large collared knop. This buckle frame is similar to one from London which was found in a deposit dated to c. 1300 to c. 1350 (Egan and Pritchard 1991, no. 421); there are also several from Meols (Egan in Griffiths et al. 2007, nos. 622-5).
Created on: Tuesday 28th July 2009
Last updated: Wednesday 14th March 2018
Spatial data recorded.


  • Thumbnail image of CAM-EC44E7

Record ID: CAM-EC44E7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small oval copper-alloy buckle frame, with a narrowed offset bar and quarter-circle cross-section. There is a lobe at either end of the bar and patches of iron staining all over frame and bar. It measures 15 mm long by 18 mm wide, and weighs 2.58g. This buckle frame is similar to one from London which was found in a deposit dated to c. 1270 to c. 1350 (Egan and Pritchard 1991, no. 274).
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-EBF632

Record ID: CAM-EBF632
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small D-shaped copper-alloy buckle frame with narrowed bar. The frame is a flattish oval in cross-section, with a well-preserved shiny white-metal coating on the reverse which has completely worn off the upper surface. There are also filemarks on the reverse. This buckle frame is similar to one from London which was found in a deposit dated to c. 1330 to c. 1380 (Egan and Pritchard 1991, no. 420).
Created on: Tuesday 28th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-895E77

Record ID: CAM-895E77
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small copper-alloy buckle frame, D-shaped internally; the outer edge has a central grooved projection forming the pin rest. There is a moulding across one side near the bar, but this has no pair across the other side. There are traces of a black coating, perhaps black ‘lacquer’ (a linseed oil coating). It measures 16 mm long and 19 mm wide, and weighs 1.31g. This is a rather amateurish copy of the ‘lipped’ buckle frames from London, found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 306-310). The moulding on the side near the bar is also found o…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-893566

Record ID: CAM-893566
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small copper-alloy buckle frame, oval internally with an offset straight bar; the outer edge is pointed externally and has a grooved pin rest. The loop of a copper-alloy pin survives on the bar, with a groove across at the junction of the loop and shaft. White-metal coating over all surfaces of both frame and pin. It measures 15 mm long and 15 mm wide, and weighs 1.21g. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 306-310).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-891616

Record ID: CAM-891616
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Flimsy oval copper-alloy buckle frame. The frame has an offset bar; the outer edge is thickened into an ornate solid pointed shape which is decorated on one face with grooves. The decoration is not symmetrical; there is a central grooved pin rest, and to one side a groove in front of a moulding and to the other side a groove in front of a double moulding. The straight bar has wear marks from a plate. The buckle frame is 21 mm wide and 17 mm long and weighs 1.37g. It is similar to a buckle from a late 14th-century context in London (Egan and Pritchard 1991, no. 297).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-88D8F2

Record ID: CAM-88D8F2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame and part of plate. The frame has an offset straight bar; the outer edge is thickened into a roll-moulding with a recess in the centre holding a separate sheet roller. The roller is now corroded into position; it has a central grooved pin rest running around both faces. The remains of a copper-alloy plate are wrapped around the bar. This has frame recesses cut into either corner, and a slot for the pin, and two separate copper-alloy rivets. Both upper and lower plates are broken at the rivet holes. The plate is a maximum of 14 mm wide and the survivin…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-88A882

Record ID: CAM-88A882
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame with offset straight bar. The outer edge is thickened into a roll-moulding with a recess in the centre holding a separate sheet roller. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 298, 301, 315, 317).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-887201

Record ID: CAM-887201
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Neatly made oval copper-alloy buckle frame with offset straight bar bearing traces of an iron pin. The outer edge is thickened into a roll-moulding with a recess in the centre holding a separate sheet roller. The roller is decorated with longitudinal ribbing and there is a patch of iron corrosion on it, presumably from the pin. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 298, 301, 315, 317).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-883DA6

Record ID: CAM-883DA6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Neatly made oval copper-alloy buckle frame with offset straight bar. The outer edge is thickened into a roll-moulding with a recess in the centre which would originally have held a separate sheet roller. Similar buckles from London have been found in deposits dated to c. 1270 to c. 1400 (Egan and Pritchard 1991, nos. 298, 301, 315, 317).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-87F902

Record ID: CAM-87F902
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame with straight bar. The outer edge is thickened into a flattened roll-moulding decorated on one face with a series of transverse grooves. Two in the centre form a pin rest, and there is a further groove close to each corner. The bar, and the sides of the frame, are very worn. Similar buckles from London date from the late 12th to the late 14th century (Egan and Pritchard 1991, p. 76).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-87C954

Record ID: CAM-87C954
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Oval copper-alloy buckle frame with straight offset bar. The outer edge is thickened into a flattened roll-moulding decorated on both faces with a series of transverse ridges. Two in the centre form a pin rest, and then there is a slightly smaller pair to either side. The corners of the roll-moulding are slightly thickened. The bar has a slight hump in the centre, caused by wear from a plate. Similar buckles from London date from the late 12th to the late 14th century (Egan and Pritchard 1991, p. 76).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-878997

Record ID: CAM-878997
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Almost circular copper-alloy buckle frame with central bar and iron pin. The cross-section throughout the loops and bar is circular; the pin survives well. A similar copper-alloy/iron buckle from London is thought to be from a spur, and was found in a deposit dating to c. 1350-c. 1400 (Egan and Pritchard 1991, no. 214).
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-867454

Record ID: CAM-867454
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, both loops probably originally identical, but one now almost completely missing. The surviving loop is kidney-shaped, i.e. oval with an incurved outer edge, and is a flattish oval in cross-section. The centre of the outer edge is embellished with a broad moulding at the pin rest. The bar projects slightly beyond the frame, and a copper-alloy pin survives; the pin is very simple, with one end pointed and the other wrapped around the bar. Maximum width 32 mm; original length c. 43 mm; length of pin 23 mm. Weight 5.35g. Late medieval or early…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-863783

Record ID: CAM-863783
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, one loop trapezoidal and one loop D-shaped. Both loops are triangular in cross-section; the central bar projects beyond the frame. Pin missing. Maximum width (across bar) 17 mm; length 22 mm. Weight 2.47g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-85CA81

Record ID: CAM-85CA81
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, both loops originally oval; one loop now largely missing. Surviving loop is a low D shape in cross-section. A copper-alloy pin survives on the central bar, with one end wrapped around to form a simple loop and the other end pointed. There is a slight swelling at the junction of loop and shaft, and the pointed end would have rested on the missing outer edge. Width 24 mm; original length c. 32 mm; length of pin 18 mm; surviving weight 2.6g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-85A086

Record ID: CAM-85A086
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, both loops rectangular. One loop is now incomplete. Surviving loop is a quarter-circle in cross-section and has possible traces of a white-metal coating. The central bar has a dip in the middle, probably due to wear from the pin, which is now missing. Width 23 mm; original length c. 34 mm; surviving weight 2.99g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-84AC63

Record ID: CAM-84AC63
Object type: BROOCH
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy annular brooch or buckle frame. The frame is circular and undecorated, 26 mm in diameter externally and 18 mm internally, and 2 mm thick. In cross-section the frame is a pointed oval with the outer arris filed down. The pin is made from circular-section copper-alloy wire with distinct longitudinal grooves and striations; close to the end there are hammer marks as if an attempt has been made to flatten it. The pin is c. 1.5 mm in diameter and 27 mm long, but the tip may have been lost through corrosion. Similar objects are classed by Egan and Pritchard (1991) as buckle…
Created on: Thursday 23rd July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-A24512

Record ID: CAM-A24512
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy double-looped buckle frame, both loops originally oval. Now twisted, and one loop broken and incomplete. The surviving loop is triangular in cross-section and has filemarks on the reverse. Pin missing. Original width 24 mm; length c. 26 mm; surviving weight 3.25g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Tuesday 30th June 2009
Last updated: Saturday 2nd August 2014
Spatial data recorded.


  • Thumbnail image of CAM-A23CC2

Record ID: CAM-A23CC2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small copper-alloy double-looped buckle frame, both loops oval, very worn and one loop now broken and incomplete. Pin missing. 18 mm long, 14 mm wide, 0.74g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Tuesday 30th June 2009
Last updated: Saturday 2nd August 2014
Spatial data recorded.


  • Thumbnail image of CAM-A221B2

Record ID: CAM-A221B2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Double-looped buckle frame, both loops oval, made from copper alloy with a shiny white-metal coating on both front and reverse. Both loops are D-shaped in cross-section, and one has a narrow groove at the pin rest. Pin missing. 26 mm wide, 34 mm long, 5.38g. Late medieval or early post-medieval, 15th to 17th century.
Created on: Tuesday 30th June 2009
Last updated: Saturday 2nd August 2014
Spatial data recorded.


  • Thumbnail image of CAM-A21243

Record ID: CAM-A21243
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy buckle frame. Pentagonal in shape, it has a narrow offset bar and four broad sides to the outer edge. There are three circular bosses, one at each angle of the outer edge, and there appears to be decoration of two transverse grooves between each of the bosses. There are small raised areas on the reverse which suggest that the bosses are separately made and attached like rivets. 28 mm long, 27 mm wide, bosses 5 mm thick. 2.83g. Very corroded condition. There are similar buckles from Meols (Egan in Griffiths et al 2007, no. 759) and Winchester (Hinton in Biddle 1990, no. 11…
Created on: Tuesday 30th June 2009
Last updated: Saturday 2nd August 2014
Spatial data recorded.


  • Thumbnail image of CAM-A1BC45

Record ID: CAM-A1BC45
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Strap-end or plate from a strap clasp, made from a long rectangular piece of undecorated copper-alloy strip folded in half and secured by a pair of copper-alloy rivets (one surviving, one missing). The surviving rivet appears designed to clasp material up to 4 mm thick. Width of strip varies from 9 to 10 mm; length of object, 26 mm; weight, 2.09g. The style of the rivet suggests a medieval date. Strap clasps were in use from the 13th to 15th centuries.
Created on: Tuesday 30th June 2009
Last updated: Saturday 2nd August 2014
Spatial data recorded.


  • Thumbnail image of CAM-9F9881

Record ID: CAM-9F9881
Object type: VESSEL
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Decorated body sherd of Grimston-type ware. Reduced grey sandy fabric with decoration of three horizontal incised lines 8-9 mm apart. Olive-green glaze on exterior only. Abraded edges. Grimston-type ware dates from the 12th to the 16th centuries (Laing, Pottery in Britain 4000 BC to AD 1900, p.97). 7.93g.
Created on: Tuesday 30th June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-FB3215

Record ID: CAM-FB3215
Object type: CANDLE HOLDER
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Socket and part of stem from a copper-alloy candle-holder or candlestick. The socket is 22 mm in external diameter and has very faint traces of circumferential decoration; a groove very near the mouth, and a slight ridge halfway down the socket. The socket is straight for a length of 30 mm and then narrows, but is still hollow, to form a hollow and undecorated stem 12 mm in diameter. The candle-holder fragment is 75 mm long. The break is fairly recent. This type of straight cylindrical socket dates from the 15th or 16th century (Brownsword 1985).
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-FAAFB5

Record ID: CAM-FAAFB5
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Small triangular copper-alloy pendant from medieval horse-harness. The lower edge is straight and just 10 mm wide with one face (presumably the reverse) undecorated. At first sight the other face also appears to be undecorated, but on closer inspection a small patch of red enamel is visible, and over the rest of the pendant there seems to be very fine keying, probably for further enamelling. At the apex of the pendant is a 6 mm wide loop, turned through 90° and pierced with an oval hole. The pendant is in total 26 mm long. This pendant is very small when compared with most medi…
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-F9F557

Record ID: CAM-F9F557
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Chunky hooked fitting made from copper alloy. The [looped] end of the curved part of the hook is broken off, but enough survives to show that the hook's cross-section was lozengiform with a lower carination internally and a higher one externally. The hook itself is large and the break is relatively fresh. On the back of the hook is a raised flattened area. The surviving end, near the raised flattened area, turns a right angle, but keeps the same cross-section, and becomes a straight shaft decorated with diagonal grooves running across the carination to give a twisted cable effect. Thi…
Created on: Monday 22nd June 2009
Last updated: Monday 17th July 2017
Spatial data recorded.


  • Thumbnail image of CAM-F9DBC3

Record ID: CAM-F9DBC3
Object type: BRIDLE BIT
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Circular domed mount made from copper alloy with corroded iron backing, probably a bridle boss. The copper-alloy element is 65 mm in diameter and relatively thin. It has a border groove and the flange around the dome has three evenly spaced but rather large and crudely made copper-alloy rivets which at first sight look like ring-and-dot motifs. On the reverse, corroded iron spreads from the rivets across the centre. The central dome is 30 mm in diameter and about 7 mm tall, with a slight depression and perhaps an iron rivet at the centre. There are several similar bosses recorded on th…
Created on: Monday 22nd June 2009
Last updated: Wednesday 6th February 2019
Spatial data recorded.


  • Thumbnail image of CAM-F92430

Record ID: CAM-F92430
Object type: COIN
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Halfpenny of Henry VI, Annulet issue, 1422-27. North 1434. 14 mm diameter, 0.47g.
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-F7C7B8

Record ID: CAM-F7C7B8
Object type: COIN
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Round halfpenny, very worn. Edward II, class 10-11 (c. 1301-14, North 1069) or Edward III, probably third (‘florin’) coinage (1344-51, North 1132) as there is no star visible anywhere. Diameter 15 mm, weight 0.57g.
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-F7B0D6

Record ID: CAM-F7B0D6
Object type: COIN
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Sterling penny. Flan damaged and worn in places. Neat slender lettering. Diameter 17 mm, weight 0.72g. Obv: crowned facing bust. –RI-- Rev: long cross with three pellets in each quarter, no other additions to the design. /SI - possibly Bristol? If so, this must be a Henry VI Restoration penny, 1470-1, North 1622/1.
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-F77D70

Record ID: CAM-F77D70
Object type: COIN
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Sterling penny. Flan slightly damaged, obverse scored, worn. Probably Edward III from the style of the lettering, 1327-77. Diameter 18 mm, weight 0.94g.
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-F74C64

Record ID: CAM-F74C64
Object type: COIN
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Sterling penny. Clipped and worn. Edward I or II, Class 1d onwards. 1280-1327. Diameter 17 mm, weight 1.07g. Possibly Durham mint. Obv: crowned facing bust + EDW R ANGL DNS [HYB] (Roman N) Rev: long cross with three pellets in each quarter, no other additions to the design. CIVI/TAS/--N/E—
Created on: Monday 22nd June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-FEBA17

Record ID: CAM-FEBA17
Object type: VESSEL
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of rim from a cast copper-alloy cooking vessel. The exterior is roughly smoothed with a good deal of sooting from the cooking fire, and the interior is very smoothly polished. The metal is a greyish green. The rim is slightly thickened to give it a plano-convex cross-section, with the curved face on the outside. The fragment measures 53 x 37 mm. The thickness of the body varies from 3 mm at the thickened rim to 1 mm at the breaks. The breaks are neither noticeably fresh nor very worn. It weighs 21.81g. There are two other rim fragments from cooking vessels from this g
Created on: Wednesday 10th June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-FEB143

Record ID: CAM-FEB143
Object type: VESSEL
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of rim from a cast copper-alloy cooking vessel. The exterior is roughly smoothed and the interior is more highly polished. The metal is a relatively light greyish green. The rim is thickened to give it a deep plano-convex cross-section with the curved face on the inside. The fragment measures 76 x 28 mm. The thickness varies from 4 mm at the rim to 2 mm at its thinnest part. The breaks are reasonably fresh. It weighs 35.99g. There are two other rim fragments from cooking vessels from this group of finds, all probably from different vessels. The type was in use for a lon…
Created on: Wednesday 10th June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of CAM-FE9ED4

Record ID: CAM-FE9ED4
Object type: VESSEL
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of rim from a cast copper-alloy cooking vessel. The exterior is roughly smoothed and the interior is more highly polished. The metal is a dark blackish-brown colour. The rim is thickened to give it a deep pointed-oval cross-section. The fragment measures 63 x 42 mm. The thickness of the body is generally 3 mm, but its maximum thickness at the rim is 7 mm. The breaks are reasonably fresh. It weighs 50.35g. There are two other rim fragments from cooking vessels from this group of finds, all probably from different vessels. The type was in use for a long period, from th…
Created on: Wednesday 10th June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SF9245

Record ID: SF9245
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Pointed-oval lead seal matrix, seen at Ipswich metal-detecting club. A scan of the matrix was subsequently made available. The seal matrix has a curvilinear central motif which is hard to identify. The inscription has no initial mark, and appears to read S'AMICIE SAILE, although the last part of the surname is uncertain; the IL could alternatively be an N and the E could be a C. The inscription can be translated as Seal of Amice Saile; Amice is a woman's name. 13th century.
Created on: Monday 9th September 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'BRUNDISH', grid reference and parish protected.


  • Thumbnail image of SF9241

Record ID: SF9241
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Published Find published
Unidentified object made from copper alloy, in form very similar to the 'lyre-shaped' buckles used in the 15th century. It is openwork and roughly oval in outline. One end has a basically rectangular perforation and the other end has two oval perforations; these combine to form the 'lyre' shape. One of the short edges of the rectangular perforation (nearest the ovals) is incurved and has rounded corners. Beyond the two oval perforations is a terminal, now probably incomplete, formed from two back-to-back scrolls with a triangular perforation in between. There are two other areas o…
Created on: Thursday 5th September 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'STOCKTON', grid reference and parish protected.


  • Image not taken

Record ID: SF9213
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Three sherds of medieval date. One is medieval coarse ware (12th to 14th century) one glazed Grimston ware (13th to 14th century) and one perhaps Essex red ware (12th to 14th century).
Created on: Wednesday 28th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'THELNETHAM', grid reference and parish protected.


  • Image not taken

Record ID: SF9215
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Medieval pottery. Eight body sherds of medieval coarse ware, and two body sherds of glazed Grimston ware. 12th to 14th century.
Created on: Wednesday 28th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'THELNETHAM', grid reference and parish protected.


  • Thumbnail image of SF9195

Record ID: SF9195
Object type: BROOCH
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Unusual object which appears to be an annular brooch. Four sides of an originally hexagonal frame survive, with a D-shaped cross-section; internally the brooch is circular. In the centre of one side is a projecting human head modelled in the round, with hair cut in a square shape to frame the face. The features are strongly and severely modelled, with big relief eyebrows meeting the top of the flattish triangular nose, lower-relief eyes, cheeks and chin, and a line for the mouth. A short neck connects the head to the frame of the brooch, which resembles stylised shoulders and angle…
Created on: Thursday 22nd August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'BLUNDESTON', grid reference and parish protected.


  • Thumbnail image of SF9197

Record ID: SF9197
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy openwork mount, perhaps from a strap. It is basically rectangular, 24 x 17 mm, although now slightly bent. A flat frame runs around the outside, thickened at each corner to take a rivet hole; one rivet hole is now broken (old break). Rising from within this frame is an almost three-dimensional lion. The lion is in profile towards the left, with its head turned to look out of the frame towards the observer. Both hind paws and the lion's left forepaw rest on the base of the frame; the lion's right forepaw stretches towards the left-hand side of the frame. All of …
Created on: Thursday 22nd August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'WALBERSWICK', grid reference and parish protected.


  • Thumbnail image of SF9193

Record ID: SF9193
Object type: DAGGER
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy pommel from a medieval sword or dagger. Viewed from the top it is slightly domed and almost circular, with seven slight facets around the edge forming a heptagon with rounded corners. The maximum 'diameter' is 29 mm. Each of the rounded corners is cut off by a broad V-shaped groove, and from either end of each one a similar groove runs at an angle to the centre. The inner facet of each of the outer grooves has a pair of short oblique lines cut into it, and some of the radiating grooves have a fine zig-zag or series of chevrons along the base. There is a space at the ce…
Created on: Thursday 22nd August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'BLAXHALL', grid reference and parish protected.


  • Thumbnail image of SF9194

Record ID: SF9194
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy shield-shaped harness mount, now slightly bent and quite worn. The shield is 30 mm long and 24 mm wide with a straight top and sides curving to a point. Three relief lions passant guardant can just be seen on the shield (the arms of England before 1340). Although these were probably reserved and gilded against a red enamel background, none of the gilding or enamel survives. On the reverse is a large tapering integral blunt-ended spike, set at a slight upwards angle; this increases the total thickness to 22 mm. These mounts are very similar to horse-harness pendants and …
Created on: Thursday 22nd August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'AKENHAM', grid reference and parish protected.


  • Thumbnail image of SF9179

Record ID: SF9179
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Lead-alloy pilgrim's badge depicting St Andrew, now bent in half. An upright rectangular plaque, it has a surviving projection at one lower corner that would originally have extended to a stitching loop; the other three corners are broken. St Andrew is in the centre of the plaque, wearing a striped or pleated gown drawn in at the waist; his limbs are splayed as if attached to an X-shaped cross. He faces the observer, but his face is very crude indeed with two large round eyes, a round nose and two large straight lips filling the whole of the space. The arms emerge from the go…
Created on: Friday 16th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'SUFFOLK BRADFIELD COMBUST WITH STANNINGFIELD', grid reference and parish protected.


  • Thumbnail image of SF9180

Record ID: SF9180
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Unidentified object made from copper alloy. It consists of a long rod, 3.5 mm square in cross-section and with the corners bevelled; one end is broken and the other end terminates in an animal's head and a junction with a second missing element. There is a gently curving bend both downwards and sideways before the break, which has apparently caused no stress to the metal; it is hard to see if this is original or not, although the fact that the terminal end is also slightly downcurving might indicate that at least part is original. It is perhaps easiest to describe the decoration fro…
Created on: Friday 16th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'FELSHAM', grid reference and parish protected.


  • Thumbnail image of SF9168

Record ID: SF9168
Object type: BALANCE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
One arm and fragment of beam from a folding balance. The arm is broken at its pierced tip; the surviving length is 38 mm and the maximum width of the arm is just 4 mm. There is a pair of ridges just before the pierced tip, and the opposite end is flattened to accommodate the beam as it folds. The beam fragment is attached by a single swivelling peg or rivet; both ends of the beam are broken. The construction of the arm is interesting; along one long edge there are voids showing that it was made either of two pieces, or of a single piece folded, and incompletely hammered together. F…
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9173

Record ID: SF9173
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Small key made from folded copper-alloy sheet. Most of the bow is missing, but the surviving fragment of perforation shows that this was circular and that the bow was made from a single thickness of sheet. The sheet had to be fairly wide to accommodate the bow, and the stem is made from folding the sheet's width in on itself from the bow end to form a tapering shape. The uncut bit is simply made from two wider thicknesses of the sheet, with a gap at the fold to produce a pierced tip. Surviving length 27 mm, width (length of bit) 10 mm, thickness 3 mm. Dating such a simple key is t…
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9169

Record ID: SF9169
Object type: FIGURINE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Three-dimensional human head made from copper-alloy, from a Limoges-style crucifix. The head is rounded, but the neck is flat and cut off at an angle; the casting appears to be complete, but may have been cut down at some time as there is no means of attachment surviving. There is a faint line around the top of the head, which may represent the hair; there is no halo, nor any rivet hole for attaching one. The nose is fairly flat, with a groove on either side running down to the ends of a straight mouth. The eyes are small, circular and deeply drilled, to take inlaid glass beads wh…
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9167

Record ID: SF9167
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Flat circular copper-alloy seal matrix, 17 mm in diameter, with a raised rib on the reverse ending in a pierced D-shaped lug at the top. The central motif is a lamb and flag (the Agnus Dei or Lamb of God); the lamb is looking back over its shoulder and one of its front legs is bent under the body. The flagpole extends up into the inscription where it is crossed to form the initial cross. The inscription around the outside reads ECCE AGNVS DEI (Behold the Lamb of God). This is quite a common 14th-century seal matrix design.
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9171

Record ID: SF9171
Object type: KNIFE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
End-cap from a knife handle. It is just a rectangular piece of thick copper-alloy sheet with a rectangular hole set centrally to accommodate a rivet, and it curves more strongly than usual; but this simple object would have been set over the curved end of the knife handle and given a substantial iron rivet with a decorative pyramidal head to provide a neat finish. Usually these end-caps taper slightly to mirror the wedge-shaped cross-section of the handle, but although the edges are corroded this one does not appear to taper. 14th century.
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9172

Record ID: SF9172
Object type: KNIFE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
End-cap from a knife, made from thin copper-alloy sheet. It was originally drop-shaped in cross-section, and this is the shape of the plate at the far end of the knife, but the sides which extend part of the way down the handle are now bent and distorted. The end measures 23 x 14.5 mm and has a central hole, probably for a rivet. It is decorated with fine engraving which has now almost corroded away. A border can be seen, and two zones of oblique lines, with curvilinear engraving in between. There is engraving in similar condition on the sides of the end-cap, which appear to consi…
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9174

Record ID: SF9174
Object type: BELL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Small bell made from copper-alloy sheet. At the top is a suspension loop, then after a short solid narrowed neck the sheet is bent around to form a long conical body. The end is cut into four points which are bent inwards to retain the pea. When the bell is held with the suspension hole running from side to side (as if strung on a necklace) the seam falls at the reverse and the front is gilded and decorated with five neat transverse grooves. The grooves definitely do not extend around the back of the bell and the gilding appears not to either. This bell would have been worn on a sa…
Created on: Thursday 15th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9161

Record ID: SF9161
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Long narrow bar-mount made from copper alloy, with the remains of a loop at one end. The bar-mount is 6 mm wide, and is D-shaped in cross-section with a flange down either long edge. The flanges appear to have worn beaded decoration. There is a rivet hole at either end, and beyond one of these is a narrowed bent-under projection which was probably originally a suspension loop or hook. Length of the bar-mount without projection, 32 mm; total length, 35 mm.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9164

Record ID: SF9164
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Bar-mount with pendent loop, both made from copper alloy. The bar-mount is 4 mm wide, with a narrower lower end which was originally bent around the pendent loop and secured by a rivet at the lower end of the mount. It is now broken at the bend. The mount is also broken at an upper rivet hole; its surviving length is 18 mm. The pendent loop is a quatrefoil with one foil having a constriction around which the bar-mount is bent. It measures 12.5 x 12.5 mm. The total combined length is 29 mm. A similar example is illustrated in Egan and Pritchard 1991, no. 1189, from a late 14th-c…
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9157

Record ID: SF9157
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy seal matrix. Flat and oval, measuring 25 x 21 mm, it has a raised flaring rib on the reverse ending at the top in a pierced D-shaped lug. The die is engraved with the top half of a hart emerging from wavy lines representing water. Around the edge is a well-engraved inscription in Lombardic script reading * S' DECANATVS DE HERTISMERE (Seal of the Deanery of Hartismere). Hartismere is the rural deanery covering Hoxne and Eye area in north Suffolk and Thornham Parva is within this. Official religious seal matrices are comparatively rare finds and tend to be, as this one i…
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'THORNHAM PARVA', grid reference and parish protected.


  • Thumbnail image of SF9158

Record ID: SF9158
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy bar-mount. It is rectangular in shape, 21.5 x 5 mm, and has bevelled edges. It does not appear to be decorated. The main part of the mount is 2 mm thick, but the addition of a small integral rivet at either end brings the total thickness up to 4 mm.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9159

Record ID: SF9159
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Crude mount made from thin copper-alloy sheet, 24 x 6 mm, with one long edge straight and the other having two shallow incurves forming three lobes. The short edges are rounded. Each of the three lobes accommodates an iron rivet. There is little dating evidence, but the mount is a similar size to the type known as a bar-mount.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9160

Record ID: SF9160
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy mount made from a piece of strip folded in half to form a basically rectangular shape. The attachment edge on the front is decoratively if crudely shaped, with a wide V-shaped cut-out in the centre and a narrower one to either side. The back plate is cut straight across. Below this is a single off-centre copper-alloy rivet, now rather corroded. Then comes a more central circular hole in both front and back plates, 3 mm in diameter; this is probably decorative, but could have served to reinforce a pin hole. At the fold, each corner has a large rectangular cut-out and th…
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9162

Record ID: SF9162
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Flat rectangular copper-alloy mount measuring 29 x 15 mm, with a central hole measuring 5 mm in diameter. It is in excellent condition, with a highly polished front; this has bevelled edges and is decorated with a border of rocker-arm engraving around a saltire of similar rocker-arm which is cut by the hole. There is a separate copper-alloy rivet in the centre of each short edge; the rivets are 4 mm long. This mount may be purely decorative, or it may have served to reinforce the holes for the pin.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9163

Record ID: SF9163
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Unusually shaped mount made from copper-alloy sheet. It is in the shape of a crescent with, in the centre of the convex edge, a projecting fleur-de-lis. There is a rivet hole in the centre of the fleur-de-lis and also one at either end of the crescent. On one face, the edges are slightly bevelled and two tiny grooves separate the stem of the fleur-de-lis from the crescent; the reverse is flat. The crescent is 16 mm wide and the entire mount is 22 mm long.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9165

Record ID: SF9165
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Domed sexfoil mount pressed from a piece of copper-alloy sheet. Each foil has a hollow pressed into it, giving a sub-triangular cross-section with concave sides. There is a central rivet hole.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9166

Record ID: SF9166
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Sexfoil mount, domed but with a flat top. Each foil has a curved edge, although these are now ragged in places. The foils are separated by grooves and there is a central rivet hole. This mount is large for its type.
Created on: Wednesday 14th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9153

Record ID: SF9153
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy strap-slide, used for holding down the free end of a strap. It is D-shaped and highly arched, with a large collared knop at the highest point of the arch. The opposite edge is 15 mm long, and has a central circular rivet hole.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Image not taken

Record ID: SF9154
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy strap-slide, used for holding down the free end of a strap. It is basically rectangular, measuring 19 x 18 mm; the upper edge is decoratively curved downwards at either end and upwards in the centre. The central part has cross-hatched decoration and is very slightly expanded. The opposite edge has a central circular rivet hole. This strap-slide probably formed a set with similar belt-mounts with expanded domed centres decorated with cross-hatching (e.g. Egan and Pritchard 1991, no. 1161); these appear to date from the second half of the fourteenth century.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9134

Record ID: SF9134
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Large barred mount made from copper alloy. The plate is made out of thin sheet and although it has lost most of its edges appears to have been roughly rectangular, with a curved decorative cut-out on each long edge close to the bar-mount. The attachment edge has rounded corners and a single rivet hole blocked by copper-alloy corrosion; the other edge has a bar-mount made of thick sheet, C-shaped in cross-section, attached by a separate copper-alloy rivet 6 mm long. The bar-mount has a rectangular notch cut out of its inner edge (i.e. the edge opposite to the one on the edge of the p…
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9136

Record ID: SF9136
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Barred mount made from copper alloy. The plate is made out of thin sheet, and appears to have lost most of its edges. As it survives now, it is roughly figure-of-eight shaped, with one lozengiform lobe and one half-lozenge lobe. The lozengiform lobe is at the attachment end, and has a single rivet hole blocked with copper-alloy corrosion. The half-lozenge lobe has a bar-mount running across it made of thicker sheet and C-shaped in cross-section. The bar-mount has no notch, and is attached by a separate copper-alloy rivet 5 mm long. This rivet has a separate squarish rove made fro…
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9140

Record ID: SF9140
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Possible barred mount. A piece of copper-alloy sheet, now fragmentary but originally shield-shaped, has a broken rivet hole towards the pointed end. The straight end has a bar-mount fixed across it, made from solid rectangular-section copper alloy bar with the short ends bevelled, rather than the more usual curved piece of copper-alloy sheet. This is attached by separate two copper-alloy rivets rather than the more usual one; the more complete rivet is 5 mm long, and has corrosion around its shaft suggesting the original presence of a rove.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9133

Record ID: SF9133
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Large barred mount made from copper alloy. The plate is made out of thin sheet and is roughly rectangular, with one large curved and one small V-shaped decorative cut-out on each long edge. The attachment edge has rounded corners and a single rivet hole; the other edge has a bar-mount made of thick sheet, C-shaped in cross-section, attached by a separate copper-alloy rivet 6 mm long. The bar-mount has a rectangular notch cut out of its inner edge (i.e. the edge opposite to the one on the edge of the plate).
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9135

Record ID: SF9135
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Barred mount made from copper alloy. The plate is made out of thin sheet and is roughly figure-of-eight shaped, with an oval lobe and a half-oval lobe. The oval lobe is at the attachment end, and has a single rivet. The half-oval lobe has a bar-mount running across it made of thick sheet, C-shaped in cross-section, attached by a second rivet. There is no notch in the bar-mount. Each rivet is made of copper-alloy and has a separate square or lozengiform rove made from copper-alloy sheet. The rivet at the attachment end is 3 mm long and that at the bar-mount is 5 mm long.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9137

Record ID: SF9137
Object type: CLASP
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Rotating end from a strap clasp, made from copper alloy. The plate is made from a rectangular piece of sheet with one long edge bent into a cylinder. The other long edge has a rectangular projection in the centre, and close to this a bar-mount made from similar copper-alloy sheet is fixed to the plate by a single copper-alloy rivet. The bar-mount is set at a slightly oblique angle to the plate, which is not unusual for this type of object and appears to be deliberate.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Image not taken

Record ID: SF9126
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Body sherd of medieval coarse ware, now broken in two.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'KENTON', grid reference and parish protected.


  • Thumbnail image of SF9143

Record ID: SF9143
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Barred mount consisting of a plate and a bar-mount, both made from copper alloy. The plate is made from thin sheet; the attachment end is now fragmentary but was originally rounded, and has one separate copper-alloy rivet which retains a small sheet rove. The sides each have a pair of small semi-circular cut-outs, and then the other end is rectilinear. Onto this is fixed the bar-mount, made from thicker sheet with a C-shaped cross-section. This is held by another rivet with lozengiform sheet rove; it sits at a slight angle. In the centre of the bar-mount's inner edge (i.e. the edg…
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9146

Record ID: SF9146
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Barred mount made from copper alloy. The plate is made out of thin sheet, and appears to have lost most of its edges. As it survives now, it is roughly trapezoidal, with a bar-mount running across the longest edge. This is made of thicker sheet, C-shaped in cross-section, and has a notch in the centre of the inner edge (i.e. the edge furthest from the edge of the plate). The bar-mount is attached by a separate copper-alloy rivet 5 mm long, with the remains of a separate rove made from copper-alloy sheet. The plate has no other rivet hole, so is presumably (although not necessarily…
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9124

Record ID: SF9124
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Cast copper-alloy leg from a vessel. A five-toed foot survives, 39 mm wide and 25 mm thick, with a groove separating this from the upper part which is D-shaped in cross-section. Only a tiny part of this exists, with an irregular U-shaped top covered in grey solder. It seems likely either that this foot broke off its vessel, and had to be replaced, or was cast as a replacement to a broken-off foot. The latter seems more likely as the edges of the top are not clearly broken. Vessels with these feet date from the mid thirteenth to the end of the sixteenth century.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'KENTON', grid reference and parish protected.


  • Thumbnail image of SF9131

Record ID: SF9131
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Horse-harness pendant complete with suspension mount, both made from copper alloy. The pendant is in the shape of a six-petalled flower, 14 mm wide and with a hollowed reverse. The uppermost petal is extended out into a long stem which eventually terminates in a loop; this is now slightly bent. The total length of the pendant is 30 mm. The suspension mount is also in the shape of a six-petalled flower, with a rivet hole in the centre blocked by iron corrosion. Below the lowest petal, a projection is folded in half and a slot cut to form two hinge loops. A copper-alloy hinge bar p…
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'BEDINGFIELD', grid reference and parish protected.


  • Thumbnail image of SF9132

Record ID: SF9132
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy oval buckle frame with enamelled decoration. Small and now badly corroded, it has an offset narrowed bar and an expanded flat angled outer edge. This provides an area for the enamelling, which consists of a grooved border around a grooved zig-zag with a curved groove in the central angle, all filled with blue enamel. This is in the Limoges style, although very much at the cheaper end of the market; it dates to the 13th century.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'KENTON', grid reference and parish protected.


  • Thumbnail image of SF9142

Record ID: SF9142
Object type: CLASP
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Plate and fragment of frame from a strap clasp, made from copper alloy. The plate is made from a piece of strip bent in half with frame recesses cut; it retains a scrap of black material, probably leather. There appear to be two well-concealed copper-alloy rivets at the attachment end. All that remains of the frame is a fragment of bar retained within the fold of the plate.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9144

Record ID: SF9144
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Barred mount consisting of a plate and a bar-mount, both made from copper alloy. The plate is made from thin sheet; the attachment end is rounded, and has one rivet hole which is now incomplete. The sides each have a pair of shallow semi-circular cut-outs, and then the other end is rectilinear. Onto this end is fixed the bar-mount, made from thicker sheet with a C-shaped cross-section. This is held by a separate copper-alloy rivet. In the centre of the bar-mount's inner edge (i.e. the edge furthest from the edge of the plate) there is a rectangular notch.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9148

Record ID: SF9148
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy strap-slide, used for holding down the free end of a strap. It is trapezoidal, with a 22 mm long upper edge which has a raised scalloped central ridge. The opposite edge is 20 mm long and has a central circular rivet hole which is blocked by the remains of a copper-alloy rivet. This rivet would have been internal to the strap-slide and would have fixed it to the strap.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9149

Record ID: SF9149
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy loop, probably a strap-slide. One end is rectilinear and the other is more rounded; the loop measures 22 x 7 mm and is 2 mm thick. Strap-slides hold down the free end of a strap, so this strap would have to be quite thin.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9150

Record ID: SF9150
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy strap-slide, used for holding down the free end of a strap. It is pentagonal, with an angled upper edge 26.5 mm long; both the upper edge and the sides are trapezoidal in cross-section and have visible filemarks. The opposite edge is 22.5 mm long, and a flatter rectangle in cross-section; it has a central circular rivet hole in which a separate copper-alloy rivet survives together with a small sheet rove. This rivet is internal to the strap-slide and retains a scrap of pale textile.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9151

Record ID: SF9151
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy strap-slide, used for holding down the free end of a strap. It is pentagonal, with an angled upper edge 24 mm long; both the upper edge and the sides are trapezoidal in cross-section and have visible filemarks. The opposite edge is 21 mm long, and a flatter rectangle in cross-section; it has a central circular rivet hole in which a separate internal copper-alloy rivet survives.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9152

Record ID: SF9152
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Copper-alloy strap-slide, used for holding down the free end of a strap. It is pentagonal, with an angled upper edge 27 mm long. The opposite edge is 23 mm long, and has a central circular rivet hole in which a separate internal copper-alloy rivet survives. Rather corroded.
Created on: Tuesday 13th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9138

Record ID: SF9138
Object type: CLASP
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Rotating end from a strap clasp, made from copper alloy. The plate is made from a trapezoidal piece of sheet, with the longest edge bent into a cylinder which retains the outer edge of the clasp's frame. The other long edge has a trapezoidal projection in the centre, and close to this a bar-mount made of thicker copper-alloy sheet is fixed to the plate by a single copper-alloy rivet. Between the bar-mount and the cylinder is a line of rocker-arm engraving. Maximum width of mount, 18 mm. Total width including frame of clasp, 19 mm. Length 9 mm. Thickness 9 mm.
Created on: Tuesday 13th August 2002
Last updated: Tuesday 11th June 2019
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9145

Record ID: SF9145
Object type: CLASP
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Frame and rotating end from a strap clasp, made from copper alloy. The frame is basically square, although the sides are slightly outcurved; each side has a small transverse moulding towards either end. The rotating end has a plate made from copper-alloy sheet, which is narrowed to fold around the outer edge of the frame. The wider part has a solid copper-alloy bar-mount attached to it by a single copper-alloy rivet; the bar-mount is set at a slightly oblique angle. The opened-out length is 21 mm, but when the rotating end is closed back onto the frame it measures 14.5 mm.
Created on: Tuesday 13th August 2002
Last updated: Tuesday 3rd September 2019
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9141

Record ID: SF9141
Object type: CLASP
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Strap clasp, with plate, frame and rotating end, all made from copper alloy. The plate is made from a strip folded in half and is now very fragmentary; a single incomplete rivet hole survives at the attachment end. The frame has strongly curved sides, each with a transverse moulding at either end. The rotating end is narrowed along one edge so that it can be wrapped around the outer edge of the frame. It has no bar-mount, but instead there is a quatrefoil of thicker copper-alloy sheet attached by a well-concealed single copper-alloy rivet. Total surviving length, 29 mm.
Created on: Tuesday 13th August 2002
Last updated: Tuesday 3rd September 2019
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9104

Record ID: SF9104
Object type: FINGER RING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
One shoulder and most of bezel from a copper-alloy finger-ring. The hoop flares gradually from 2 mm wide at the old and worn break, to a maximum of 10 mm wide in the centre of the oval bezel. The bezel is flat and has an engraved fleur-de-lis set longitudinally. The shape of this ring, with steeply sloping shoulders and a flat bezel, indicates a 15th- to 17th-century date.
Created on: Friday 9th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'BRANTHAM', grid reference and parish protected.


  • Thumbnail image of SF9107

Record ID: SF9107
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Strap-end, now consisting of two pieces of copper-alloy sheet held together by a single separate copper-alloy rivet at one end. One piece is broken off at 22.5 mm long; it is decorated with a line of rocker-arm engraving down each long edge, and an irregular central longitudinal grooved zig-zag made up of punchmarks. In each of the angles of the zig-zag is a short longitudinal groove, similarly made up of punchmarks. The other piece of copper alloy is also probably broken, but survives to 35.5 mm long; it is undecorated. The maximum width, at the attachment end, is 8.5 mm; this tap…
Created on: Friday 9th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9115

Record ID: SF9115
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
One sheet from a composite strap-end. Made from copper-alloy, it is 46 mm long and tapers from 13 mm at one end to 10 mm just before the simple lozengiform terminal. There are no rivets or rivet holes and no trace of solder; there is no decoration. Part of one long edge plus the corner at the terminal has a flange less than a millimetre thick, indicating the original presence of side-strips.
Created on: Friday 9th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


  • Thumbnail image of SF9114

Record ID: SF9114
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
Strap-end made from a single piece of copper-alloy sheet bent in half and secured by a single separate copper-alloy rivet. The rivet is neatly concealed at one end but has a conspicuous (but neat) thick round disc head at the other. The strap-end appears to have been made out of sheet previously used for something else, because it tapers from 14 mm wide at one end to 11 mm wide at the other. The unbent length is about 27 mm, and it is possible that a single sheet from a composite strap-end was modified to form this object.
Created on: Friday 9th August 2002
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'COVEHITHE', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,542
Search server index: valhalla

You are viewing records: 1 - 100.

Search statistics

  • Total quantity: 1,953
  • Mean quantity: 1.267
  • Maximum: 50

Filter your search

1 - 100 of 1,542 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.