Record ID: HAMP3888
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Copper-alloy two-part dog collar stud? Sub-square base with concave sides. Conical, square-sectioned spike (22mm long), through centre, with circular-sectioned stud , now bent, on reverse. Rivet hole in each corner of the base; three rounded rivets intact. The upper surface of the base has engraved leaf-shaped motifs, between horizontal and vertical bands of lines. Much surface gilding survives. Red/brown dull patina. L: 26.5 Base dims.: 18.5 x 18.5 Wt: 8.47g
Created on: Friday 9th May 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3889
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Fragment, sheet copper-alloy mount? Originally circular with a slightly domed centre. Three broad wheel-cut grooves of varying thickness provide an outer border. The area between the outer border and the raised centre is decorated with incised foliate designs and the area surrounding this is cross-hatched forming diamonds. There is a rivet through this decorative field with a large circular flat head and a broken circular-sectioned shaft. Heavy gilding survives well on the upper surface. The outer edges are thicker. The inner edges are badly damaged
Created on: Friday 9th May 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3856
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Fragment, copper-alloy casket/chest mount. Straight-sided, rectangular mount with D-shaped section. One end has a broken loop, the other has a transverse ridge, followed by a circular element with a circular perforation and then a pointed terminal. Dull, dark brown patina.
Created on: Friday 25th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3834
Object type: FIXTURES AND FITTINGS
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy harness stud/mount. Lozenge-shaped with square-sectioned integral rivet at reverse. Eight-petalled flower at centre, within border. Trace of knops on outer edge of each corner. Gilding surviving on recessed areas of upper surface.
Created on: Thursday 24th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3769
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Fragment, cast copper-alloy mount. Convex. Roughly rectangular, slightly tapering at one end. One circular rivet hole and traces of two others. Incised decoration consists of linear border on long sides, two parallel lines at either end on short side. Two diagonal lines between the parallel lines.
Created on: Monday 21st April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'HAMPSHIRE WHERWELL', grid reference and parish protected.

• 

  Image not taken

Record ID: HAMP3670
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy bar mount with terminal and central lobes. Circular central lobe has six incised lines. Copper-alloy rivets survive in each terminal lobe.
Created on: Tuesday 15th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3673
Object type: FIXTURES AND FITTINGS
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy mount depicting draped Virgin and child. Oval pedastel has transverse ridges. Integral, pointed rivet for attachment. Dark brown/red pitted patina. Little detail of moulding survives.
Created on: Tuesday 15th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3675
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Sheet copper-alloy decorative mount; perhaps from a box/chest. Flat, rectangular with three circular rivet holes down the centre, one of which retains a copper-alloy rivet. One of the short sides has had two triangular notches removed. The incised decoration is as follows; a line along the edge of both longer sides, two parallel lines on each of the shorter sides – one at one end, the other three-quarters along. The inner lines form a square, which has two diagonal lines forming an X at the centre, which is not in the centre of the mount. There are incised diagonal lines along the lo…
Created on: Tuesday 15th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3640
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy mount/stud. Four-armed mount, although only two of the arms are complete. Central, domed boss, undecorated. Each of the arms has a circular rivet hole.
Created on: Monday 14th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3655
Object type: FIXTURES AND FITTINGS
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast lead mount. Circular, with moulded relief decoration on the upper surface in the form of a lion's head within a plain border. Beyond the outer border, the edge is slightly bevelled. There is the trace of an iron fitting at the top of the upper surface and a further iron fitting through the centre of the reverse surface, although this is incomplete. The reverse is flat. Patches of iron corrosion on the reverse.
Created on: Monday 14th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3596
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy boar’s head fitting. Stylised boar’s head with neatly moulded small ears, short mane and flat snout. The jaws and tusks are incised on either side. The long face is sub-triangular with slightly convex sides in section. No trace of the eyes survives. The broken end representing the neck is narrow and oblong in section. There is a long rectangular shank with a rectangular –section cast integrally with the boar’s head at the bottom centre. There is a large circular perforation at the lower end of the shank. Patchy brownish patina, missing in places. H: 25 W: 26 …
Created on: Wednesday 9th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3570
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy casket/chest mount. Flat, but with slightly convex profile. Pointed terminal attached to rounded end which has a circular rivet hole and two diagonal mouldings at the junction with the rectangular bi-facial shaft. There are three raised squares along the shaft; the terminal one has a circular rivet hole and moulded cross-hatched decoration. Dark brown patina.
Created on: Tuesday 8th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3571
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy casket/chest mount. Flat. Slightly convex profile. Rounded, elongated terminal attached to rounded end which has a circular rivet hole and two transverse ridges. Rectangular, bi-facial shaft terminates at the other end with a raised square which has a moulded cross-hatched motif. Dark brown patina.
Created on: Tuesday 8th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3573
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy mount. Quatrefoil; circular, domed, hollow body with four trefoil circular lugs at base. Each lug has a rivet hole at centre; one copper-alloy dome-headed rivet surviving. Iron corrosion on all other rivets from iron rivet shank. Patchy olive green patina; otherwise red/brown metal.
Created on: Tuesday 8th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3551
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy mount. Sub-rectangular with one pointed end and the other end is concave with a semi-circle cut-out. The upper and lower surfaces are flat, but the sides have two elements, resulting in a total of six sides. There is a very large circular-sectioned copper-alloy rivet with flattened ends close to the pointed end. The other end, which is broken, is also likely to have held a large rivet.
Created on: Monday 7th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3545
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast coppe-alloy stud/mount. Symmetrical moulded foliate design with transverse moulded ridge below. Integral, circular-sectioned rivet on the reverse. Traces of gilding surviving on the upper surface.
Created on: Monday 7th April 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3429
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Wokingham
Workflow stage: Published
Cast copper-alloy a mount in the form of a leopard’s head and neck. Open-jawed with teeth and jaw-line well-defined with incised lines and notches. Well-defined flattened ears. The eyes are not depicted. The neck is stamped with ‘C’-shaped motifs. The back of the neck follows a diagonal line and is flat. Iron corrosion at the base of the neck, perhaps indicating an iron core.
Created on: Monday 24th March 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3405
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Incomplete, cast copper-alloy leather mount; bar with terminal and central lobes, although one of the terminal lobes is mising. The central lobe is cross-hatched and part of one copper-alloy rivet survives.
Created on: Sunday 23rd March 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP3406
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy mount; bar with terminal and central lobes. The central lobe has a central circular hole and the terminal lobes have holes for missing rivets. Even grey gun-metal patina.
Created on: Sunday 23rd March 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP3320
Object type: FIXTURES AND FITTINGS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published
Cast copper-alloy figural mount depicting the crucifixion. Integrally-cast rivets behind the hands and feet. The features are worn, but are reasonably well-defined. The hair is defined on the reverse surface suggesting that the mount may have been viewed from both sides. A disc-shaped element above the head may represent the crown.
Created on: Wednesday 19th March 2003
Last updated: Thursday 24th February 2011
Spatial data recorded.