Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Periodfrom: 21
    • Page: 26

  • Image not taken

Record ID: NMS-32A4FB
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus of Constantius I, reverse GENIO POPVLI ROMANI type, mintmark and further details illegible, c.AD300-5
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of ESS-328972

Record ID: ESS-328972
Object type: BUCKLE
Broad period: MEDIEVAL
County: Essex
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval copper alloy buckle, dating AD 1350-1450. The frame is oval in shape and has a triangular lip projecting from one of the loner edges. There is iron corrosion along the other long edge, which is where the iron pin would have been attached. The iron corrosion obstructs much of the object, making it difficult to discern its original shape. The object has a mid-light grey colour with patches of light green, with an orange-brown colour around the concreted iron. What is visible of the frame is similar to forked spacer buckles, cf. NLM-83F73C, which tend to date from…
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of SWYOR-3270B5

Record ID: SWYOR-3270B5
Object type: FIGURINE
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy figurine probably dating from the Roman period, AD 43 - 410. It is in the form of a bird with a plump, rounded body, the upper side slightly convex, a small, forward facing and tucked down head and a blunt, rounded tail. The back of the bird is marked with a series of narrow incised grooves. Beneath the body are two lugs, one angled forwards and one backwards, creating an inverted V shape between them. Each lug is flat on the inner side, convex on the outer side and rounded at the lower end. The inner sides of the legs are connected by separate circular, copper alloy bar…
Created on: Tuesday 16th August 2016
Last updated: Wednesday 17th August 2016
Spatial data recorded.


  • Thumbnail image of LVPL-3261A9

Record ID: LVPL-3261A9
Object type: COIN
Broad period: POST MEDIEVAL
County: St. Helens
Workflow stage: Awaiting validation Find awaiting validation
A silver sixpence of William III, (1694-1702). Reverse: 1697 MAG BR FRA ET HIB REX; crowned shields.York mint, Y below bust. Spink no. 3536.
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded. This findspot is known as 'Billinge', grid reference and parish protected.


  • Thumbnail image of SWYOR-3251F5

Record ID: SWYOR-3251F5
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Post Medieval coin; a farthing of Charles II (AD 1660 - 1685), dating from AD 1672 - 1679. See Spink's Standard catalogue (2003) number 3394. The coin is 21.9mm diameter, 1.6mm thick and 3.85g.
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of LVPL-323C56

Record ID: LVPL-323C56
Object type: COIN
Broad period: POST MEDIEVAL
County: Denbighshire
Workflow stage: Awaiting validation Find awaiting validation
Silver sixpence of William III (c1694-1702). The coin is very worn but would originally have had the bust of the king on the obverse with the legend GVILELMUS III DEI GRA. Traces of the bust can still be seen. This face has been counter stamped twice one with a small sans serif J and then again with a more cursive J. The reverse has traces of the crowned cruciform shield, none of the legend survives. The coins has been slightly bent and distorted and was almost certainly reused as a love token. Diameter: 19.71mm; weight: 1.6g
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded. This findspot is known as 'Dyserth', grid reference and parish protected.


  • Thumbnail image of WMID-323066

Record ID: WMID-323066
Object type: CHISEL
Broad period: BRONZE AGE
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy probable chisel of probably the Bronze Age period, probably dating from c. BC 1600 - c. BC 1100. The object is trapezoidal in plan and broadly rectangular in section. Only the blade end of the object survives, and the cutting edge is 29.2 mm wide and the sides then taper to 25.9 mm wide at the break, where it is 10.5 mm thick and a rounded rectangle in cross-section. No evidence of the side flanges or stop ridge survive making the object hard to classify and date confidently. The break appears clean and straight, which could suggest it was deliberately done…
Created on: Tuesday 16th August 2016
Last updated: Monday 22nd August 2016
Spatial data recorded.


  • Image not taken

Record ID: SF-32184C
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
4 x flint debitage of Neolithic to early medieval date. Two secondary flakes and two tertiary flakes. All are small, squat flakes with small butts and prominant bulbs of percussion. All have only slightly patinated surfaces. Two flakes are creamy grey in colour, two are light translucent brown. There are no signs of retouch. Total weight: 42.89g
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded. This findspot is known as 'Ufford', grid reference and parish protected.


  • Thumbnail image of SWYOR-321835

Record ID: SWYOR-321835
Object type: BUCKLE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Part of a copper alloy buckle dating from the Medieval period, AD 1350 - 1500. The remaining portion consists of two rectangular fragments of copper alloy sheet (the front and back plates) with a fragment of a forked spacer sandwiched between them. There are two copper alloy rivets holding the three elements together, one on the outer edge ofeach short side. Both rivets remain in place. There is also a third small, circular perforation in the centre, now filled with corrosion. One sheet is decorated with a narrow incised double line border running along one of the short edges of the re…
Created on: Tuesday 16th August 2016
Last updated: Wednesday 17th August 2016
Spatial data recorded.


  • Thumbnail image of SWYOR-31FC5F

Record ID: SWYOR-31FC5F
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy unidentified object of unknown date in the form of a bird's head and beak forming a terminal. The head is three-dimensional and has recessed eyes filled with pale blue enamel. The bird's beak is moulded as two projecting curved spikes, the lower one damaged, forming an open beak. The neck of the bird is only two-dimensional and is sub-rectangular in plan with concave long edges. There are traces of incised zigzag lines perhaps representing feathers. At the base of the neck, is a projecting tab or tang, narrower than the neck. It is unclear whether this is complete or whe…
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of BERK-31EA41

Record ID: BERK-31EA41
Object type: COIN
Broad period: POST MEDIEVAL
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
A worn copper alloy, post-medieval 'Rose' farthing of Charles I (AD 1625-1649), dating to the period AD 1636-1649. Type 2 Rose farthing with single arched crowns; the initial mark is too worn to decipher. North N2291.
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of WMID-31CF94

Record ID: WMID-31CF94
Object type: PIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy probable annular brooch or buckle pin of the Medieval period, dating from c. AD 1270 - c. AD 1350. The pin is broadly triangular in plan and rectangular in cross section. The pin has a complete supension loop at one end which would have attached to the brooch or buckle. This loop is broadly circular with a circular perforation (hole) through the centre. Below the suspension loop is a rectangular collar, that protrudes slightly from the rest of the object. The collar is decorated with three incised horizontal grooves on its surface, with ridges flanking each …
Created on: Tuesday 16th August 2016
Last updated: Monday 22nd August 2016
Spatial data recorded.


  • Image not taken

Record ID: NMS-31BBC5
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Irregular copper alloy nummus of Constantine I, reverse Two Victories holding shield perhaps on cippus, mintmark and further details illegible, c.AD320-30
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of BERK-31A327

Record ID: BERK-31A327
Object type: COIN
Broad period: ROMAN
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Roman nummus (AE2/3) of Constantine I, dating to the period AD 315-316. Reece Period 15. SOLI INVICTO COMITI reverse type, mint of London. RIC VII 92.
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Image not taken

Record ID: NMS-317CD2
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nummus, fragment of a House of Constantine or later issue, reverse, mintmark and further details illegible, c.AD330-83
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of WMID-315440

Record ID: WMID-315440
Object type: DEBITAGE
Broad period: NEOLITHIC
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Flint working debitage of probably the Neolithic to Bronze Age period, dating from c. BC 4000 - BC 800. The object is probably a tertiary waste flake removed from a larger core, it may have been subjected to further working. The object is broadly triangular in plan and broadly D shape in section. The right side of the dorsal face has 2 rectangulars removal which both have very shallow conchoidal ripple marks radiating from the proximal end. There appears to be some evidence of scaled retouch at a low angle on the right of the dorsal face at the proximal end. The ventral face shows sh…
Created on: Tuesday 16th August 2016
Last updated: Monday 22nd August 2016
Spatial data recorded.


  • Thumbnail image of BERK-315166

Record ID: BERK-315166
Object type: COIN
Broad period: MEDIEVAL
County: West Berkshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly damaged silver Venetian soldino of Doge Michele Steno, dating to the period AD 1400-1413. Mint of Venice. The Venetian soldino, meaning "little shilling", circulated unofficially as halfpennies in England during the 15th and early 16th centuries, due to a lack of small change in the country at the time. They were nicknamed "galyhalpens" or galley-halfpence after the "galley-men" who imported them: the merchants on the Venetian galley fleet who came to England each summer. There were two main influxes of soldini, the first under Doge Michele Steno (like this coin) and the sec…
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of SWYOR-314D33

Record ID: SWYOR-314D33
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman coin: a radiate, probably of Victorinus, dating from AD 269 - 271 (Reece period 13), the reverse probably of the VIRTVS AVG type, depicting Virtus standing right holding shield and spear. Mint I. The coin is 18mm in diameter and 2.3mm thick. It weighs 2.41gm.
Created on: Tuesday 16th August 2016
Last updated: Wednesday 17th August 2016
Spatial data recorded.


  • Thumbnail image of ESS-3144AB

Record ID: ESS-3144AB
Object type: COIN
Broad period: ROMAN
County: Essex
Workflow stage: Awaiting validation Find awaiting validation
A Roman nummus of Constantius II (AD 347-355). Reece period 18. FEL TEMP REPARATIO reverse, depicting a Roman soldier spearing a fallen cavalryman. Mint unknown. Dimensions: diameter: 17.26 mm; weight: 1.71g .
Created on: Tuesday 16th August 2016
Last updated: Tuesday 16th August 2016
Spatial data recorded.


  • Thumbnail image of SWYOR-313E37

Record ID: SWYOR-313E37
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy steelyard weight probably dating from the Roman period (AD 43 - 410). It is biconical and has the remains of an iron suspension loop (broken) at the top. Weights of this form are usually considered to be Roman, but the steelyard was also used in the Medieval and Post Medieval periods. The lead has a grey and white patina. Compare SWYOR-5AE111. The weight is 47mm tall, 51mm diameter and 477g. This mass could roughly equate to 1.5 Roman pounds (allowing for the extra weight of the missing iron loop).
Created on: Tuesday 16th August 2016
Last updated: Wednesday 17th August 2016
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 691,656
Search server index: asgard

You are viewing records: 501 - 520.

Search statistics

  • Total quantity: 1,072,635
  • Mean quantity: 1.551
  • Maximum: 52,504

Filter your search

501 - 520 of 691,656 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.