Record ID: LON-A0531B
Object type: VESSEL
Broad period: ROMAN
County: Greater London Authority
Workflow stage: Awaiting validation
A fragment of Roman ceramic Verulamium Region Coarse White-slipped ware (VCWS) ring-neck flagon with neck and handle remaining, Hadrianic to Antonine date AD120-190. The fragment consists of the flagon neck with a handle of four ribs and a four rilled rim. The flagon is undecorated aside from the rim, the exterior surface has a thin white slip and the interior is an oxidised red. The fabric is oxidised red with numerous sand inclusions throughout. Similar flagons can be seen in Davies, Richardson and Tomber (1994:56 fig.46 No.251-253). Dimensions: height: 85.73mm; width of handl…
Created on: Monday 13th November 2017
Last updated: Wednesday 15th November 2017
Spatial data recorded.

Record ID: OXON-64A3D4
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete Roman copper alloy Colchester Polden hill brooch, probably dating to c. AD 75-125. The brooch is only missing its pin. The head of the brooch survives to a width of 25.1mm. The wings are oval, with an open reverse and each wing terminating in a perforated oval wing cap. The wing caps expand outwards slightly towards the reverse. The wings are decorated with two incised lines the first placed c.1.2mm from the outside edge, and the second a further 1.2mm in from the first. The bow projects from the head with a width of 7.0mm and has a D-shaped cross section with…
Created on: Monday 9th March 2020
Last updated: Thursday 12th March 2020
Spatial data recorded. This findspot is known as 'Crawley CP', grid reference and parish protected.

Record ID: OXON-026738
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
A fragment of the lower part of a Roman zoomorphic brooch probably dating to the 2nd century AD. Only the zoomorphic foot of the brooch and its catchplate survives. The foot of the brooch is in the moulded design of an indeterminate species of bird. It is sub-triangular in cross section with a concave reverse. Looking at the front of the brooch its upper sides are slightly convex (11.7mm wide). They then narrow, at the neck of the animal to 7.1mm wide and become straight sided. In profile it is initially straight sided then bows out, at the same point it thins to a neck, slightly…
Created on: Wednesday 22nd April 2020
Last updated: Tuesday 11th August 2020
Spatial data recorded.

Record ID: WMID-3F9295
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy Roman decorated trumpet brooch, dating to circa AD 75 to 400. The brooch is almost complete apart from the missing pin and spring mechanism. The brooch is an inverted 'L' shape in profile and the bow tapers from an oval head to a circular foot knop. At the reverse of the head are the remains of a perforated lug that would have held the spring in place. The lug has a circular piercing. At the reverse of the lower bow are the remains of the catch plate that extend from below the moulded collar to the point where the foot knop extends. The …
Created on: Thursday 7th May 2020
Last updated: Friday 11th February 2022
Spatial data recorded.

Record ID: OXON-4391B5
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete Roman cast copper-alloy steelyard weight with a lead core in the form of a bust probably of the god Jupiter. The lower portion of the weight is lost to old damage such that only a fragment of the bust’s shoulders remain. The surviving copper-alloy shell consists of an entire human head that is very well moulded providing a naturalistic representation of a male head. The head has oval depressions for eyes which appear to have slightly domed eyeballs within, suggesting no enamel was intended to fill these. Between these is a projecting triangular nose. Below this i…
Created on: Monday 12th October 2020
Last updated: Tuesday 5th January 2021
Spatial data recorded. This findspot is known as 'Alvescot CP', grid reference and parish protected.

• 

  Image not taken

Record ID: LIN-0D39A3
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Roman enamelled, copper alloy, umbonate brooch. The brooch dates to c. AD100-AD 250. The brooch is circular, domed, and has a flat, incomplete, perimeter ledge. The domed surface is decorated with twelve triangular cells, alternating with red and blue enamel. The short side of each cell is crescent shaped, curving into the interior of the cell. In the centre of the dome is a small knop. A circular flat cell projects from one side. This contains an inner circular cell which contains the remains of a degraded enamel or paste, now cream coloured. A catchplate is located on …
Created on: Thursday 21st July 2016
Last updated: Thursday 21st July 2016
Spatial data recorded. This findspot is known as 'near Sleaford', grid reference and parish protected.

Record ID: WMID-0987E1
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper alloy trumpet brooch of Roman date (circa AD 75 to 175). The brooch consists of the head and the upper part of the bow. The foot and catch plate, spring and pin are missing. The brooch is 'C' shape in profile. The bow tapers from a flared head to a moulded waist and then terminates in an old break that is well patinated. The head of the brooch is sub-oval in plan, and tapers into the bow. The bow head is undecorated. The reverse of the head is flat and has a vertically placed integrally cast lug. The lug has an incomplete circular perforation placed slightly …
Created on: Tuesday 15th March 2022
Last updated: Wednesday 16th March 2022
Spatial data recorded.

Record ID: WMID-09D43B
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, foot and catch plate missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. The wings have been decorated with a vertical groove, located next to the shoulder. A ridge is present at the shoulder between the wings and the bow. The back of the brooch is undecorated. …
Created on: Tuesday 15th March 2022
Last updated: Wednesday 16th March 2022
Spatial data recorded.

Record ID: WMID-910308
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete Roman Colchester derivative brooch of Polden Hill (Mackreth Group 4.g, flat wing ends type), dating to AD 160-200. The brooch is largely intact although the catchplate is damaged and the pin incomplete. The wings are semi-cylindrical in plan with pierced wing/end caps intact. The end caps extend slightly beyond the diameter of the wings. The bow head is hump-like, and slightly angular (comma shaped) in profile. At the reverse of the head is a groove which would have retained the spring. A rearward facing hook is present at the top of the bow, this would have he…
Created on: Monday 9th May 2022
Last updated: Monday 4th July 2022
Spatial data recorded.

Record ID: WMID-4C162A
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill of Roman date (AD 80 to AD 120). Approximately 50% of the brooch is present, with the pin, foot and catch plate missing. In plan, the brooch is almost T-shaped, and D-shaped in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with cylindrical wings projecting from either side at the top. A ridge is present at the shoulder between the bow and the wings. No decoration is present on the wings. Silver inlay wire in a curvilinear design is present in sections on the head of the …
Created on: Wednesday 18th May 2022
Last updated: Wednesday 18th May 2022
Spatial data recorded.

Record ID: WMID-E3F47E
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
An incomplete enamelled copper alloy pelta plate brooch of Roman dating (2nd Century AD). Less than 50% of the brooch is present, consisting of the lower curve of the plate. The surviving part of the brooch is crescent shaped with patinated breaks along the upper edges and on the terminals. The front has been decorated with two different colours of enamel, in recessed cells. In the centre is a vertically orientated rectangle. This one is a light, almost white blue enamel. To either side are slightly curved rectangular panels, reflecting the edges of the brooch. These cells have r…
Created on: Wednesday 24th November 2021
Last updated: Wednesday 24th November 2021
Spatial data recorded.

Record ID: WMID-F6E72D
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Trumpet style brooch, of Roman (75 to 175 AD) dating. Approximately 50% of the brooch is present, with the pin and spring missing, presumed lost in antiquity. The rest of the brooch is intact. The brooch has been bent just below the head at an acute angle, c. 45 degrees. The head of the brooch is oval in plan, and tapers into the bow. The reverse of the head is concave. A vertical bar is present in the reverse of the head, with a circular hole for the axis bar (infilled with iron corrosion products). There is no evidence of a head loop or plate. Th…
Created on: Wednesday 2nd March 2022
Last updated: Wednesday 2nd March 2022
Spatial data recorded.

Record ID: WMID-F79EC4
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Trumpet style brooch, of Roman (75 to 175 AD) dating. Approximately 50% of the brooch is present, with the pin and spring missing and an incomplete catch plate, presumed lost in antiquity. The rest of the brooch is intact. The head of the brooch is oval in plan, and tapers into the bow. The reverse of the head is concave. A vertical bar is present in the reverse of the head, with a circular hole for the axis bar (infilled with iron corrosion products). There is no evidence of a head loop or plate. The bow of the brooch is D shaped in cross section…
Created on: Wednesday 2nd March 2022
Last updated: Wednesday 2nd March 2022
Spatial data recorded.

Record ID: WMID-AB85A6
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy brooch of Colchester derivative, Polden Hill (Mackreth Group PH 4.b., flat wing ends), Mackreth 2011, Plate 46, #1911. Of Roman dating (80 - 120 AD). Approximately 65% of the brooch is present consisting of the bow, and parts of the wings, catch plate and spring casing. The pin and spring are missing. In plan, the brooch is almost T-shaped, and has a shallow D-shape in cross section. The bow head is hump-like, and angular (comma shaped) in profile, with hollow wings projecting from either side at the top. A small rib is present at the junction bet…
Created on: Thursday 28th April 2022
Last updated: Wednesday 12th October 2022
Spatial data recorded.

Record ID: WMID-35C8C2
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Roman brooch of Colchester derivative, Polden Hill of Roman dating AD 80 to AD120. Around 25% of the brooch is present, consisting of the bow. The wings, spring, pin, foot and catch plate are missing, presumed lost in antiquity. The bow is angular and hump back, resembling a comma. It is broken around 1/3 of its length. Ridges are present at the shoulder junction between the bow and the wings. Decoration is present on the wings in the form of a vertical twisted rope style line. The wings are incomplete and consist of small stubs. A cylin…
Created on: Tuesday 17th May 2022
Last updated: Tuesday 17th May 2022
Spatial data recorded.

Record ID: WMID-35B60F
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Roman brooch of Colchester derivative, Polden Hill of Roman dating AD 80 to AD120. Around 25% of the brooch is present, consisting of the bow. The wings, spring, pin, foot and catch plate are missing, presumed lost in antiquity. The bow is angular and hump back, resembling a comma. It is broken around 1/3 of its length. Ridges are present at the shoulder junction between the bow and the wings. The wings are incomplete and consist of small stubs. A cylindrical recess is present behind the wings, this would originally have retained the spr…
Created on: Tuesday 17th May 2022
Last updated: Tuesday 17th May 2022
Spatial data recorded.

Record ID: WMID-362870
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative, Polden Hill (Mackreth 2011, Part 3, Group 5, flat wing type, Western Group), c.f. Mackreth 2011, 5.b4.Plate 50, of Roman dating (AD 80 - AD 120). Approximately 50% of the brooch is present consisting of the upper part of the bow and wings. The lower half of the bow, foot, spring and pin are missing. The brooch is T-shaped in plan and the wings are semi-cylindrical. The bow head is hump-like, and angular (comma shaped) in profile. A rectangular groove is present at the reverse of the head alo…
Created on: Tuesday 17th May 2022
Last updated: Tuesday 17th May 2022
Spatial data recorded.

Record ID: WMID-FFDE04
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Roman brooch of Colchester derivative, Polden Hill (Mackreth 2011, Part 3, Group 4j,), c.f. Mackreth Type 4.j. Plate 48, AD c. 70-175 Less than 50% of the brooch is present, consisting of one wing, head and bow. The brooch has one semi-cylindrical wings, which are short and undecorated. A ridge is present at the shoulder. The bowhead is angular in profile and the bow is decorated with a double vertical rectangular, ridged panel. A rearward facing hook is present on the top of the head, this would have held part of the spring. A cylin…
Created on: Wednesday 19th October 2022
Last updated: Wednesday 19th October 2022
Spatial data recorded.

Record ID: WMID-FFB1AF
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Roman brooch of Colchester derivative, Polden Hill of Roman dating AD 80 to AD120. Around 25% of the brooch is present, consisting of the bow. The wings, spring, pin, foot and catch plate are missing, presumed lost in antiquity. The bow is angular and hump back, resembling a comma. It is broken around 1/3 of its length. The wings are incomplete and consist of small stubs. A cylindrical recess is present behind the wings, this would originally have retained the spring. The reverse is undecorated. It measures 18.6 mm in length, 9.1 m…
Created on: Wednesday 19th October 2022
Last updated: Wednesday 19th October 2022
Spatial data recorded.

Record ID: WMID-FFC536
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy Colchester derivative brooch of Roman date (AD 80-120). Only the head, one wing and bow remain. The right hand wing is partially remaining with the spring, pin, foot and catch plate missing. The bow head is slightly angular (comma shaped). Located at the reverse of the head is a broadly oval concave recess where the spring would have been held in place. The bow tapers from the head to a pointed damaged and incomplete foot. There does not appear to be any decoration on the brooch. The brooch measures 25.6 mm in length, 17.0 mm in wid…
Created on: Wednesday 19th October 2022
Last updated: Thursday 27th October 2022
Spatial data recorded.