Record ID: WMID-D589E7
Object type: RING
Broad period: UNKNOWN
County: Oxfordshire
Workflow stage: Awaiting validation
A complete copper alloy ring of a dark brown colour. The darker colouring may be due to waterlogged condition of the soil, and there are areas of wear and chipping where the green colouring of copper alloy are visible. The object is annular with a D-shaped cross section; it has a flat interior and a convex exterior. The centre has two groove. There is one groove at the top and bottom of the ring. The dating of this object is diffuclt to specify, ranging from Bronze Age to Post-Medieval. It is possibly a harness ring, but could have had a number of uses.  Measureme…
Created on: Tuesday 9th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: WMID-4A092D
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Published
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). The flat axe is broadly sub rectangular in shape with a splayed crescent shaped blade. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 16.5 mm (thickness: 4.2 mm). The sides of the axe gently expand in width from the butt to the blade; in shape they are relatively curved. The axe is thickest at the mid point (10.4 mm), with traces of a proto stop ridge p…
Created on: Monday 27th November 2023
Last updated: Thursday 4th January 2024
Spatial data recorded.

Record ID: WMID-A17076
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Cheshire East
Workflow stage: Published
A complete Early Bronze Age copper-alloy low flanged developed axehead.  The axehead is sub rectangular in cross section and has a shallow lenticular side profile. It has a rounded and arched butt and slightly diverging sides that abruptly expand to a broad crescentic blade and cutting edge, with the blade tips at right angles to the sides, but not recurving. Very faint cast flanges extend along the sides, rising very gradually from the butt towards the middle of the axe and sloping down again to the blade expansion. The axe has a curved bevel or ridge about halfw…
Created on: Tuesday 7th November 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: WMID-1E3D55
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Derbyshire
Workflow stage: Awaiting validation
A cast bronze (copper alloy) faceted socketed axe of late Bronze Age date (950 – 750 BC). The axe is relatively short and stubby and is known as ‘baggy axe’. The axe is sub-rectangular in plan with concave sides and a flared convex cutting edge, which measures 48.1mm across. The mouth of the socket is broadly oval (28.9mm x 24.7mm). The mouth of the socket has a faint moulded collar, although some of the original surface is missing. At the base of the collar, on one edge is a complete loop.  The two long sides of the axe are concave at the centre…
Created on: Friday 1st September 2023
Last updated: Monday 4th September 2023
Spatial data recorded.

Record ID: WMID-23F776
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 13.9 mm in length, 20.7 mm wide and 20.7 mm thick. It weighs 14.2 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original …
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-23DBAA
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 14.8 mm in length, 17.8 mm wide and 13.3 mm thick. It weighs 6.2 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the origi…
Created on: Thursday 27th July 2023
Last updated: Thursday 25th January 2024
Spatial data recorded.

Record ID: WMID-67DBA1
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy socketed spear of Middle to Late Bronze Age dating (c. 1500 to 800 BC). The fragment is sub rectangular in shape, with a slight lentoid cross section. A central rib runs vertically on both faces. Not much survives of the wings, or of the tip. Old, post-depositional breaks are present along each edge.  The fragment measures 17.9 mm in length, 12.1 mm wide and 2.8 mm thick. It weighs 1.8 g. The fragment is a dark green colour with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in the loss of the original …
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-66DE32
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy (bronze) socketed axehead fragment, of Late Bronze Age dating (c. 950 BC to c. 750 BC) Less than 25% of the axehead is present, consisting only of part of the body, blade and the remnants of the socket. It is missing the top part of the axehead and the loop. It is sub rectangular in plan, with an straight but abraded cutting edge. The socket is sub rectangular in section. The depth of the socket from the edge of the break to the base of socket is 21.8 mm. The two long sides of the axe expand slightly along the length of the socket and te…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-6690EE
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). Less than 25% of the flat axehead is present, consisting of the butt of the axe head. The flat axe fragment is broadly sub rectangular in shape with a rounded butt. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 26.8 mm (thickness: 2.7 mm). The sides of the axe gently expand in width from the butt to the midpoint; in shape they are relatively straight. …
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-64E514
Object type: MOULD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete stone possible mould, for an uncertain object, possibly a spear tip, possibly of Middle Bronze Age dating (2300 BC to 1500 BC). Around 25% of the possible stone mould is present, consisting of a triangular recess, with raised edges. The reverse is rounded with no signs of working. Breaks are present along the raised edges and at the base of the triangular recess. It measures 60.7 mm in length, 31.2 mm wide and 13.0 mm thick. It weighs 31.7 g. The stone is a fine grained probable sandstone. Light brown in colour, with a smooth surface.
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.