Record ID: WMID-D589E7
Object type: RING
Broad period: UNKNOWN
County: Oxfordshire
Workflow stage: Awaiting validation
A complete copper alloy ring of a dark brown colour. The darker colouring may be due to waterlogged condition of the soil, and there are areas of wear and chipping where the green colouring of copper alloy are visible. The object is annular with a D-shaped cross section; it has a flat interior and a convex exterior. The centre has two groove. There is one groove at the top and bottom of the ring. The dating of this object is diffuclt to specify, ranging from Bronze Age to Post-Medieval. It is possibly a harness ring, but could have had a number of uses.  Measureme…
Created on: Tuesday 9th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.

Record ID: WMID-4A092D
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Published
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). The flat axe is broadly sub rectangular in shape with a splayed crescent shaped blade. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 16.5 mm (thickness: 4.2 mm). The sides of the axe gently expand in width from the butt to the blade; in shape they are relatively curved. The axe is thickest at the mid point (10.4 mm), with traces of a proto stop ridge p…
Created on: Monday 27th November 2023
Last updated: Thursday 4th January 2024
Spatial data recorded.

Record ID: WMID-A17076
Object type: FLANGED AXEHEAD
Broad period: BRONZE AGE
County: Cheshire East
Workflow stage: Published
A complete Early Bronze Age copper-alloy low flanged developed axehead.  The axehead is sub rectangular in cross section and has a shallow lenticular side profile. It has a rounded and arched butt and slightly diverging sides that abruptly expand to a broad crescentic blade and cutting edge, with the blade tips at right angles to the sides, but not recurving. Very faint cast flanges extend along the sides, rising very gradually from the butt towards the middle of the axe and sloping down again to the blade expansion. The axe has a curved bevel or ridge about halfw…
Created on: Tuesday 7th November 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: WMID-1E3D55
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Derbyshire
Workflow stage: Awaiting validation
A cast bronze (copper alloy) faceted socketed axe of late Bronze Age date (950 – 750 BC). The axe is relatively short and stubby and is known as ‘baggy axe’. The axe is sub-rectangular in plan with concave sides and a flared convex cutting edge, which measures 48.1mm across. The mouth of the socket is broadly oval (28.9mm x 24.7mm). The mouth of the socket has a faint moulded collar, although some of the original surface is missing. At the base of the collar, on one edge is a complete loop.  The two long sides of the axe are concave at the centre…
Created on: Friday 1st September 2023
Last updated: Monday 4th September 2023
Spatial data recorded.

Record ID: WMID-23F776
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 13.9 mm in length, 20.7 mm wide and 20.7 mm thick. It weighs 14.2 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the original …
Created on: Thursday 27th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-23DBAA
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete probable casting jet from copper casting, of uncertain dating (2350 BC to AD 1800). The casting jet is conical in shape. The top surface is sub oval in shape, with a rounded edge, and a concaved surface. Below this, the jet narrows to a point, with slightly facetted sides. It measures 14.8 mm in length, 17.8 mm wide and 13.3 mm thick. It weighs 6.2 g. The casting jet is a mid to dark green colour, with an uneven surface patina. Abrasion, caused by movement whilst within the plough soil, has resulted in a loss of some of the origi…
Created on: Thursday 27th July 2023
Last updated: Thursday 25th January 2024
Spatial data recorded.

Record ID: WMID-67DBA1
Object type: SPEARHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy socketed spear of Middle to Late Bronze Age dating (c. 1500 to 800 BC). The fragment is sub rectangular in shape, with a slight lentoid cross section. A central rib runs vertically on both faces. Not much survives of the wings, or of the tip. Old, post-depositional breaks are present along each edge.  The fragment measures 17.9 mm in length, 12.1 mm wide and 2.8 mm thick. It weighs 1.8 g. The fragment is a dark green colour with an even surface patina. Abrasion, caused by movement while within the plough soil, has resulted in the loss of the original …
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-66DE32
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy (bronze) socketed axehead fragment, of Late Bronze Age dating (c. 950 BC to c. 750 BC) Less than 25% of the axehead is present, consisting only of part of the body, blade and the remnants of the socket. It is missing the top part of the axehead and the loop. It is sub rectangular in plan, with an straight but abraded cutting edge. The socket is sub rectangular in section. The depth of the socket from the edge of the break to the base of socket is 21.8 mm. The two long sides of the axe expand slightly along the length of the socket and te…
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-6690EE
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). Less than 25% of the flat axehead is present, consisting of the butt of the axe head. The flat axe fragment is broadly sub rectangular in shape with a rounded butt. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 26.8 mm (thickness: 2.7 mm). The sides of the axe gently expand in width from the butt to the midpoint; in shape they are relatively straight. …
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-64E514
Object type: MOULD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete stone possible mould, for an uncertain object, possibly a spear tip, possibly of Middle Bronze Age dating (2300 BC to 1500 BC). Around 25% of the possible stone mould is present, consisting of a triangular recess, with raised edges. The reverse is rounded with no signs of working. Breaks are present along the raised edges and at the base of the triangular recess. It measures 60.7 mm in length, 31.2 mm wide and 13.0 mm thick. It weighs 31.7 g. The stone is a fine grained probable sandstone. Light brown in colour, with a smooth surface.
Created on: Tuesday 18th July 2023
Last updated: Thursday 9th November 2023
Spatial data recorded.

Record ID: WMID-D8B00F
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Cheshire East
Workflow stage: Published
A fragment of a Middle Bronze Age copper alloy palstave dating circa 1500-1150 BC. The fragment consists of the crescentic cutting edge and lower blade. The upper body terminates in a worn and irregular rectangular break. The solid cross-section and the mid rid on both sides suggests the object is a palstave rather than a socketed axehead.   The object measures 61.9 mm in length, 63.5 mm in width (across blade), 27.9 mm wide (across the body). The blade edge is 3.8 mm thick and the body is 14.4 mm thick. It weighs 170.0 g. All s…
Created on: Thursday 29th June 2023
Last updated: Friday 30th June 2023
Spatial data recorded.

Record ID: WMID-5439F4
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Published
An incomplete fragment from a socketed axehead, of Late Bronze Age dating (c. 950 BC to c. 750 BC). Less than 25% of the socketed axehead is present, and consists of part of the mouth and body. The rest is missing, presumed lost in antiquity, The mouth may have originally been square in shape, as the fragment exhibits an almost right angle bend. The mouth has a rolled rim. The start of two ribs are present on the body. It measures 20.2 mm in length, 24.5 mm wide and 6.1 mm thick (at the mouth), 3.4 mm thick (body). It weighs 7.5…
Created on: Friday 23rd June 2023
Last updated: Friday 23rd June 2023
Spatial data recorded.

Record ID: WMID-2FD5D5
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Cheshire East
Workflow stage: Awaiting validation
An incomplete copper alloy flat axehead, probably dating from the Early Bronze Age period (c. BC 2350 - c. BC 2050).  The axe is broadly rectangular in plan with a slightly splayed crescentric blade. In profile and in section the object is broadly lentoid. The sides of the axe gently taper outwards with a shallow curve, from the rounded butt to the blade. The curve is less shallow towards the blade. The axehead has suffered significant loss from corrosion on all surfaces, particularly at the blade and the butt. The axehead measures 56.9 mm in length, the…
Created on: Wednesday 21st June 2023
Last updated: Tuesday 19th September 2023
Spatial data recorded.

Record ID: WMID-0226FA
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An almost complete low flanged copper alloy looped palstave of Middle Bronze Age date (c. 1400-1150 BC). Group 3 type.  The blade is broadly triangular in shape with a wide and curved cutting edge. The cutting edge measures 69.5mm in width and is 5mm thick. The cutting edge is blunt. The septum (the area between the flange facets and the stop ridge) gradually tapers towards the butt and is a broad U shape and measures 65.5mm in length. The septum is 10.3mm deep at the stop ridge and the sides have a depth of 8.2mm.  The flanges start off pa…
Created on: Monday 19th June 2023
Last updated: Tuesday 20th June 2023
Spatial data recorded.

Record ID: WMID-6F858B
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An almost complete copper alloy looped palstave of Middle Bronze Age date (c. 1400-1150 BC). Group 3 type.  The blade is broadly triangular in shape with a wide cutting edge. The cutting edge measures 58.2mm in width and is 7.8mm thick. The cutting edge is blunt. The septum (the area between the flange facets and the stop ridge) gradually tapers towards the butt and is a broad U shape and measures 64.7mm in length. The septum is 8.7mm deep at the stop ridge and the sides have a depth of 6.5mm.  The flanges start off parallel to the stop ridge an…
Created on: Monday 12th June 2023
Last updated: Wednesday 14th June 2023
Spatial data recorded.

Record ID: WMID-1AF96C
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Shropshire
Workflow stage: Published
An almost complete copper alloy unlooped palstave of Middle Bronze Age date (c. 1500-1300BC). Early palstave of Group II - mid rib type. The blade of the palstave is triangular shaped in plan with expanding sides. The cutting edge measures 57.3mm in width and is 5.3mm thick. The cutting edge is blunt. The septum (the area between the flange facets and the stop ridge) gradually tapers towards the butt and is a broad U shape and measures 55.6mm in length. The septum is 6.9mm deep at the stop ridge and the sides have a depth of 6.6mm.  The fla…
Created on: Thursday 8th June 2023
Last updated: Wednesday 20th March 2024
Spatial data recorded.

Record ID: WMID-1A8BAD
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy (bronze) flat axe of Early Bronze Age dating (c. 2350 BC to c. 2050 BC). The flat axe is broadly sub rectangular in shape with a splayed crescent shaped blade. In profile it is broadly lentoid, with slight tapering edges. The butt is relatively thin having a narrow rounded profile; the width at the butt is 23.7 mm (thickness: 2.5 mm). The sides of the axe gently expand in width from the butt to the blade; in shape they are relatively curved. The axe is thickest at the mid point (10.1 mm), with no traces of a proto stop ridg…
Created on: Thursday 8th June 2023
Last updated: Thursday 8th June 2023
Spatial data recorded.

Record ID: OXON-683031
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Central Bedfordshire
Workflow stage: Published
A complete Middle Bronze Age palstave axe of the Group 3 type dating to c. 1400 – 1150 cal BC. The butt of the axe is c.15.4mm wide, c.3.4mm thick and is slightly worn giving it an uneven slightly convex shape.. The septum measures c. 48.8mm in length. The flanges of this axe begin just after the butt and widen in a slightly convex line up the length of the septum. After this point, in side profile, the blade sides narrows in a slightly convex curve towards the cutting edge.  The blade is decorated beneath the stop by a trident pattern created…
Created on: Wednesday 12th April 2023
Last updated: Tuesday 18th April 2023
Spatial data recorded.

Record ID: WMID-78D9C3
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Shropshire
Workflow stage: Awaiting validation
A fragment of a Middle Bronze Age copper alloy palstave dating circa 1500-1150 BC. The fragment consists of the crescentic cutting edge and lower blade. The upper body terminates in a worn and irregular break. The solid cross-section suggests the object is a palstave rather than a socketed axehead, although there is no evidence for a central casting seam on the side. All surfaces however are heavily worn with a green/brown coloured surface patina. For a more complete palstave discovered in Staffordshire see (WMID-9C1A13) and (WMID-F2F5ED) discovered in De…
Created on: Sunday 19th March 2023
Last updated: Tuesday 21st March 2023
Spatial data recorded.

Record ID: WMID-777E0A
Object type: ARROWHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy barbed and tanged arrowhead, dating to the Bronze Age, between 1350 - 1050 BC. The arrowhead is triangular in form. In antiquity the object would have had two barbs and a central tang. Only one barb is now complete. The remaining barb is broader at the body and tapers to a rounded damaged point. The upper end of the object is pointed. There is a central shallow rib running longitudinally from the point to the broken tang. This is seen in both faces of the arrowhead. The object has a green coloured surface patina.  The…
Created on: Sunday 19th March 2023
Last updated: Thursday 23rd March 2023
Spatial data recorded.