Back to simple search | Back to advanced search

    You searched for:

    • Primary material: Copper alloy

  • Image not taken

Record ID: NMS-25EAA0
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin weight for a Philipsgulden, obverse figure holding long cross, S_X over P flanking, reverse hand flanked by 8 over H and 4 over F, produced by Hans Foncq of Antwerp, weight 3.03g, 1584
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-25D276
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle consisting of an annular frame of oval cross-section and a cast pin of similar but tapering cross-section, with a rectangular boss or grip near the penannular loop and a slight concavity on the underside near the tip. A standard form, cf. NMS-BBF4D7 and Egan and Pritchard 1991, nos. 440-50 for pins of the same type. External and internal diameter 46 and 35.5mm. Thickness of frame 4mm. Length of pin 47.3mm. 14th century.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-25BC83
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin weight for a unite of James I, 2nd coinage with counterstamp at top left of obverse for revaluing, square and biface, obverse crowned XXII/ S, reverse I R BRIT with crowned bust right holding orb and sceptre, weight 9.17g, 1604-19
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of WMID-25ABE2

Record ID: WMID-25ABE2
Object type: CUFF LINK
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy cuff link or small button probably dating to the Post Medieval period (c. AD 1750-1900). The object is circular in plan and flat in cross-section. The face is undecorated and shows signs of wear. On the reverse are the remains of an integral lug. No other distinguishing marks are apparent. The object has a dark green patina. The overall dimensions are as follows: 8.84mm in diameter, 2.75mm in thickness and 0.62g in weight.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-25A3B3
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy as of uncertain emperor, period of Nerva to Hadrian, obverse laureate head right, reverse figure standing right, c.AD96-138
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-25A00A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy rectangular buckle frame with a narrowed central bar, an integral rectangular loop projecting from the centre of one side, an incomplete wire pin on the bar and a pin notch in the centre of the outside edge. Probably for the suspension of a sword, cf. Whitehead 2003, nos. 470-1, Egan and Pritchard 1991, nos. 446 and 457. There are profuse file marks on the reverse. Length 28.5mm. Width with loop 26.1mm, without loop 20mm. c.1350 - c.1500.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of WMID-257365

Record ID: WMID-257365
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Colchester Derivative brooch dating to the Roman period (c. AD 75-175). The remains of the brooch consist of the head with both partial wings, and part of the bow. The spring, pin, foot and catchplate are all missing. The head of the brooch is concave to the reverse to accommodate the now missing spring. Both wings taper towards worn breaks, as does the bow of which roughly one third remains. There are no decorative features apparent on the remains of the object. The brooch is very worn with a dark green patina. A probable comparable example can be seen in …
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-255D00
Object type: CANDLESTICK
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Slightly squashed cylidrical lathe-finished socket of a medieval to post-medieval copper alloy candlestick broken across the tapering, hollow base and with a closely spaced pair of encircling grooves at the mid-point. Extant height 29.5mm. External diameter c.19mm. Internal diameter c.17mm. 15th - 16th century.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-2555EA

Record ID: PUBLIC-2555EA
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Published Find published
An incomplete copper-alloy Roman radiate, contemporary copy of a coin of Tetricus I (AD 271-274), dating to the period AD 275-285 (Reece Period 14). PA[X AVG] reverse type depicting Pax standing left holding branch and vertical sceptre? Unclear mint. Cf. Normanby no. 1951.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded. This findspot is known as 'Nr Codicote', grid reference and parish protected.


  • Image not taken

Record ID: NMS-2485D8
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two post-medieval cooper alloy buttons with solid heads and integral loops, 16th century: - globular head with nipple, drilled loop. Diameter 10mm. length 15.7mm. - plano-convex head, non-drilled loop. Diameter 11.5mm. Length 12.3mm.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-246D12
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval black-coated copper alloy double-looped buckle frame, both loops oval with gently angled edges, and with rust from an iron pin in the centre of the bar. Length and width 33.4 and 26.5mm. 16th century.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-2456A4
Object type: ROWEL SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
End of one D-sectioned side with an elaborate terminal of a post-medieval copper alloy spur. A small drilled hole lies between two attachment holes and amongst V-sectioned transverse and oblique grooves. There is a small lateral projection next to the outer fixing hole. On the short extant piece of the side there are two oblique grooves and one parallel moulded groove. Comparable with two rowel spurs from Beeston Castle, Cheshire (Ellis, B. in Ellis 1993, 165, fig, 112, nos. 2 and 3). Extant length 39.5mm. Thickness 3mm. First half 17th century.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-242BBA
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval double-looped buckle frame, both loops trapezoidal, with iron staining around the bar and on parts of the reverse, probably from the plate. From the ends of the edge of one loop spring "large lobed knops on the end of winged extensions", cf. Whitehead 2003, nos. 526-7. Length and width 27.8 and 40.9mm. c.1620 - c.1680.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-240CFE
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy double-looped buckle frame, both loops oval, with a lobe at all four corners and at the ends of the bar. Very similar to Whitehead 2003, no. 382. Length 38mm. Width 22.5mm. c.1550 - c.1650.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-23EC06
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy double-looped buckle frame, both loops trapezoidal, gently angled in profile, with remains of an iron pin loop, a pin notch on one edge and a transverse groove at both ends of both edges. Comparable with Whitehead 2003, nos. 523-4, but smaller and with an elongated or spiky lobe at the ends of the bar. Length 24.7mm. Width 16.5mm. c.1620 - c.1680.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-23C159
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy oval shoe buckle frame with remains of an embedded iron spindle, broadly comparable with Whitehead 2003, nos. 618 and 619, but on the edges a broad moulded groove is flanked by pairs of narrow grooves and the sides are marked by multiple notches. Length and width 32.7 and 24.6mm. c.1660 - c.1720.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-2393CC
Object type: KEY (LOCKING)
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy rotary key with a small lobe at the proximal end, a circular bow, a collar at the start of the solid, round-sectioned shank which tapers to a blunt terminal, and a bit that is plain apart from a small grooved projection on the underside. Width of bow 19.7mm. Length 53.4mm. Bit 6 x 5.5 x 3mm. Perhaps 17th - 18th century.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-2381C0

Record ID: NLM-2381C0
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin. Nummus of Gratian (367-383), Arles mint Emperor standing left issue of 367-375, Reece period 19; frayed. Obverse description: Bust diademed draped and cuirassed right, pudding basin haircut. Reverse description: Emperor in military dress standing right with propped shield and labarum; possibly OF in left field, though appearing like an elongated X Reverse inscription: [GLORIA NOVI SAECVLI] Diameter: 17.7mm, Weight: 1.15gms, die axis: 12
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded. This findspot is known as 'Temple Bruer', grid reference and parish protected.


  • Image not taken

Record ID: NMS-236050
Object type: HARNESS MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy harness mount in the form of a sexfoil with details moulded in counter-relief. Of two integral flat-sectioned attachment spikes on the reverse one is incomplete. Very similar to NLM-8D2D2E, SF-8E0D98 and SF-8E0014. Diameter 21.5mm. Thickness excluding spikes 1.8mm.17th century.
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-23433F

Record ID: NLM-23433F
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin. Nummus of the House of Constantine (306-361), Gloria Exercitus issue of 330-336, Reece period 17; chipped recently with loss of about one third of flan. Obverse description: Bust cuirassed right, elongated neck. Obverse inscription: [---]VS AVG Reverse description: Two soldiers with two standards between them Reverse inscription: [GLORIA] EXERC ITVS Diameter: 16.4mm, Weight: 1.05gms, die axis: 6
Created on: Wednesday 19th September 2018
Last updated: Wednesday 19th September 2018
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 502,319
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 720,310
  • Mean quantity: 1.434
  • Maximum: 52,504

Filter your search

1 - 20 of 502,319 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.