Record ID: SUR-EB6A51
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A worn Roman copper alloy barbarous radiate imitating an issue of an uncertain ruler dating to AD 275-285 (Reece period 14). Illegible reverse. Uncertain mint.
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

Record ID: SUSS-EB2261
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy Late Iron Age/Early Roman Nauheim type brooch dating between 50 BC - AD 50. The brooch is cast in one piece; the spring being intact, with a partially surviving pin. The spring extends from the bow plate in four coils, the internal chord looping underneath the bow and extending into the pin, of which approximately half survives, ending in a worn break. The bow is composed of a flat triangular plate that narrows to an elongated foot, ending in a worn break. The upper surface of the bow is decorated with two incised…
Created on: Thursday 4th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: WAW-EAF58A
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
Workflow stage: Awaiting validation
An incomplete, copper alloy object, possibly casting waste of unknown date (c. 2400 BC - AD 1900). The object is sub-rectangular in plan and sub-rectangular in cross section. On one side, there is a raised, triangular section that is 6.41mm thick, after which the thickness drops to 3.78mm. The object then gradually expands in thickness until it is 6.52mm thick on the other side. In the centre, there are two main oblique, transverse grooves that run across the width of the object, with two sub-triangular indentations between them on the right-hand side. The reverse is largely flat, exc…
Created on: Thursday 4th April 2024
Last updated: Friday 12th April 2024
No spatial data available.

Record ID: LANCUM-EA77AB
Object type: KNIFE
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A cooper alloy pommel cap from a sword or knife. It is circular in shape. There is a central flat ring, and from this the two faces are convex. There are circular holes present top and bottom for fixing to the hilt, these might suggest a knife or dagger pommel rather than one for a sword. There is no apparent decoration, and there is some pitting on the surface, although it has an even, dark green patina. It is probably an Oakeshott Type G style. Dimensions: It is 33mm long and 28mm wide, 20mm thick and weighs 33.0g
Created on: Thursday 4th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: YORYM-EA67B7
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete copper-alloy globular headed pin of Early-Medieval date, c.AD 800 - 1000. The pinhead is globular with irregularly spaced ring and dot designs around its circumference and one on the flattened top. From the base of the head a circular sectioned shaft extends, tapering to a worn break. The worn remains of a raised collar are present at the junction between the head and the shaft. The metal has a delaminated mid-brown patina and is worn. The pin is 22.8mm long, the head is 11.4mm in diameter, the shaft is 2.2mm in diameter and weighs 5.4g. Collared pins with ring-and-do…
Created on: Thursday 4th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: WMID-EA61F4
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy colchester derivative Polden Hill brooch (possibly CD PH 6.a2-6.a3 type) of Roman date, circa AD 100-175. The brooch is missing its, foot, catchplate, spring and pin. The brooch is T-shaped in plan and the bow head is hump-like, and slightly angular (comma shaped) in profile. The bow is D-shaped in cross section and tapers to a worn transverse break. The sides of the head are decorated with curved mouldings, characteristic of Polden Hill brooches. At the top of the head is an intact rearward facing…
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: LANCUM-EA582D
Object type: AXEHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A section of a copper alloy axehead. It is triangular in section, being a blunt point on one side, and crescent shaped, but not symmetrical across its break, being more pointed at one end than the other. The blade is not facetted. There is some loss of material from the faces. Along the broken face there is a suggestion that it might have been hollow and therefore a section of socketed axehead, but this is not definitive. Dimensions: It is 67mm long, 21mm wide and 11.5mm thick. It weigh 56.83g
Created on: Thursday 4th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded. This findspot is known as 'Near Whittington', grid reference and parish protected.

Record ID: YORYM-EA3DE8
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle of medieval date, c.AD 1250 - 1400. Meols Type 10. The buckle is a single looped oval with a narrowed and offset bar and ornate outer edge. Two prominent knops flank two smaller knops with raised collars where they join. The central recesses would have acted as a rest for the pin. The pin no longer remains. The metal has a mid-green patina and is in fair condition. The buckle is 21.5mm long, 24.7mm wide, 3.7mm thick and weighs 2.9g. A similar example is illustrated in Whitehead p.21, no.78 and is dated to circa AD 1250 - 1400. Ref: Griff…
Created on: Thursday 4th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-EA2E8F
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy strap-end of Medieval date. It is rectangular in shape, with three central holes for rivets, one of which is missing. There is evidence of gilding. The strap-end tapers at one terminal and contains a cut out before terminating in an old break. Length: 23.74mm Width: 15.42mm Weight: 1.08g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-EA1B08
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle plate of Medieval date. The folded plate is incomplete, with the remains of three rivets, one of which is in situ. The plate is broadly triangular in shape, with evidence of gilding and incised decoration.  Length: 32.84mm Width: 15.42mm Weight: 2.30g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-E9F946
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy strap-end of Medieval date. Rectangular in form, it has holes for 3 rivets, one of which is in situ. Two are parrallel, the third is slightly offcentre. It terminates in an old break, with the remains of two circular holes. There is evidence of gilding.  Length: 24.24mm Width: 12.84mm Weight: 1.54g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SF-E9E634
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy enamelled buckle plate of 12th or 13th century date. The plate is a Limoges product made from copper-alloy of which only a tiny stub survives. It is broadly circular in shape, but following the pattern of the enamel design dipping in the centre of each side of the plate. The enamel design comprises four lozenge shaped petals, with white, blue and red enamel, surrounding a circle which is pierced in the centre for a now missing rivet. Limoges dress accessories are only occasionally recorded (see NMS-128191, BH-9EC418, NMS-948…
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-E9BDC3
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy forked spacer strap-end of Medieval date. All that remains is the spacer, with a collared acorn-type knop. Similar examples can be found in Egan and Pritchard, 2011, pg 144, fig 94, 680, 681.  Length: 38.54mm Width: 18.20mm Weight: 5.08g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SUSS-E99D3D
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A fragment of a Post Medieval copper alloy double loop buckle/sword belt hanger dating to AD 1500 to 1630.  Only the circular suspension loop, a short section of the strap bar and the stubs of each loop survive. The suspension loop is set at 90°s to the frame. The object has a dark green patina and worn breaks.  Measurements: total length: 26.63mm; width: 9.91mm; thickness including loop: 12.07mm and weight: 3.35g.  Compare:BUC-E1EF78; PUBLIC-295732 and SOM-5AA907 which notes; buckles with integrally cast suspension loops are a s…
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E9872B
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy Medieval buckle. The frame is boradly oval in shape, with an incomplete composite rigid plate and the remains of an iron pin. There is a notch for a missing pin, the frame protrudes on each side at junction of narrowed bar and frame. The plate has an incised transverse groove below the pin. A similar example can be seen in Egan and Pritchard, 2011, pg 79, fig 48, 324.  Length: 21.05mm Width: 20.97mm Weight: 6.38g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: LEIC-E9774B
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of the House of Valentinian dating to c. AD 364 - 375. (Reece Period 19) GLORIA ROMANORVM, reverse type shows the emperor dragging a captive and holding a standard. Mint uncertain. Diameter: 15.2 mm  Weight: 1.99 g
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E97342
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Medieval buckle. The frame is broadly oval in shape, with ornate outside edges and composite plate. The frame protrudes at each side and has a pin notch; the plate is recessed for the frame, has a transverse ridge next to slot for the now missing pin, an integral rivet in the plate. There is evidence of gilding. The frame is convex at the outer edge. A similar example can be seen in Egan and Pritchard, 2011, pg 77, fig 46, 316.  Length: 49.71mm Width: 26.48mm Weight: 22.69g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: LEIC-E971A4
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of the House of Valentinian dating to c. AD 364 - 375. (Reece Period 19) GLORIA ROMANORVM, reverse type shows the emperor dragging a captive and holding a standard. Mint uncertain. Diameter: 17.3 mm  Weight: 1.74 g
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E954C5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A incomplete copper-alloy Medieval buckle. The frame is broadly square in shape with an incomplete foldedrectangular composite plate, which breaks around the narrowed bar leaving only one part of the plate. The frame has slightly convex sides, with a ridge near each corner; thick outside edge has three filed grooves, bar offset and narrowed; plate is recessed for frame ad has slot for missing pin and holes for a single missing rivet. There is iron corrosion around the pin hole and on the pinrest, suggesting an iron pin.  A similar example can be seen in Egan and Pritchard, 20…
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SUSS-E95493
Object type: MINIATURE OBJECT
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation
A complete Romano British cast copper alloy miniature (votive) axe dating c. AD 43-410. The sub-trapezoidal head is rectangular in cross section and measures 13.65mm wide at the cutting edge. The blade has a straight long upper edge and slightly concave lower edge to the haft, then straightening to the butt. The blade tapers in thickness from the cutting edge to the butt. The axe has an integrally cast haft with a circular cross-section at the worn rounded base of the handle, flattening towards the head into a rectangular cross se…
Created on: Thursday 4th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: SF-E93518
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy Medieval buckle. The frame is circular in form, with an integral plate, which tapers towards an old break. The frame protrudes on each side before the plate. The plate retains the pin, and has a circular hole for a, now missing, rivet and terminates at the remains of another circular hole at the break. There is gilding evident, in a design of a central line, and 45 degree diagonal lines on each side of the central line. A similar example can be seen in Egan and Pritchard, 2011, pg 78, fig 48, 320-231.  Length: 32.17mm Width: 14.60mm Weight: 3.70g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-E913AE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Medieval buckle. It has an oval frame with an integral plate. The plate tapers in the middle, retains the pin, and has two holes for missing rivets. It terminates with rectanglar shape with a protruding incomplete hook, and has a slightly curved profile. A similar example can be seen in Egan and Pritchard, 2011, pg 78, fig 48, 320-231.  Length: 48.54mm Width: 15.71mm Weight: 5.45g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-E8E45A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Medieval buckle. It is a buckle with two loops and an integral plate between. It has two circular loops with straight outer edges which protrude at each side, plate has three holes which contain iron pins or rivets. A similar example can be seen in Egan and Pritchard, 2011, pg 108, fig 70, 488.  Length: 37.58mm Width: 13.05mm Weight: 4.86g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SF-E8CC17
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle with integral rigid plate of Medieval date. The oval frae has an ornate outside edge, with six incised grooves. The rectangular, incomplete, bevelled plate, retains a copper-alloy pin, and has a further small circular hole for a missing rivet. Below, there are two incised incomplete ovals. The alloy has a high tin content, retaining a silvery colour across the majority of the surface. The pin appears to be made from a different alloy, and has no white metal content.  Length: 24.28mm Width: 18.14mm Weight: 2.97g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SUSS-E8A3A9
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
An incomplete Roman copper alloy hinged double lugged trumpet brooch, dating between AD 80-200. The head of the brooch is ovate, with two integral pierced semi circular lugs on the reverse to accommodate an axis bar. Between both pierced lugs sits an intact copper alloy spring of four coils with a semi-circular loop set behind the spring, hanging toward the foot. The coils are covered in iron corrosion suggesting the axis bar may be iron. One coil extends into an incomplete circular-sectioned pin which tapers towards a worn break near the catchp…
Created on: Thursday 4th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E89094
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius II, Lyons, reverse GLORIA EXERCITVS 2 standard type, mintmark [...S?]LG, AD330-5
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E87903
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle with coposite rigid plate of Medieval date. The frame is incomplete, but would have been oval in shape, the pin is missing.  Similar examples can be seen in Egan and Pritchard, 1991, pg79, fig 48, 323 and 324.  Length: 30.99mm Width: 18.85mm Weight: 2.90g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: LEIC-E87491
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of Constantine I, dating to AD 310 - 318. (Reece Period 15) SOLI INVICTO COMITI, reverse type shows Sol, chlamys falling from left shoulder, standing left, raising right hand and holding up globe with left hand. Mint of Trier. Diameter: 19.1 mm Weight: 2.13 g
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E8683B
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle with coposite rigid plate of Medieval date. It has a forked spacer, notch for missing pin, the frame protrudes on each side at junction of narrowed bar and frame. Similar examples can be seen in Egan and Pritchard, 1991, pg79, fig 48, 323 and 324.  Length:37.79mm Width: 14.77mm Weight: 2.67g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

Record ID: SF-E85102
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy buckle with integral (rigid) plate of Medieval date. It is broadly trapezoidal in form, with an incised notched pin rest on the outer edge, a circular hole for the now missing pin below the frame. It has a stamped dot pattern across the plate in repeating lines, before terminating in an old break. It is undecorated on the reverse.  Length:29.09mm Width: 21.92mm Weight: 3.66g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-E850F1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius II, Trier, reverse GLORIA EXERCITVS 1 standard type, mintmark M//[...], AD337-41
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: YORYM-E83651
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Colchester derivative, or Thealby, brooch of Roman date, c.AD 75 - 200. Mackreth 2011, Colchester derivative Type 17a/b1, no direct parallel, similar plate.65, no.2580. The head of the brooch comprises tubular wings which act as a hinge mechanism. An axis bar is retained through the lugs and a pin slot is encrusted with iron corrosion. The pin proper no longer remains. An integral rectangular panel collar projects from the top edge of the head. It is decorated with transverse ridge and grooves, the central ridge of which is ribbed. An oval loop projects fr…
Created on: Thursday 4th April 2024
Last updated: Wednesday 17th April 2024
Spatial data recorded.

Record ID: NARC-E8295A
Object type: COIN
Broad period: POST MEDIEVAL
County: Milton Keynes
Workflow stage: Awaiting validation
An incomplete copper alloy 1 Öre of Gustav II Adolf of Sweden (AD 1611-1632). Crown above crossed arrows reverse. No mint mark. AD 1632 The coin is missing a minor portion of its outer flan between 8-9 O’clock. Diameter: 36.67mm, Thickness: 2.70mm, Weight: 19.7g Compare: https://www.numisbids.com/n.php?p=lot&sid=3204&lot=21 Obverse : [GV]S[A ADOLF D G] SVE:GOT:VAN:REX Crowned coat of Arms of the House of Vasa (Kingdom of Sweden) Reverse: MONETA CVPREA M D C  XXIX Crown above crossed arrows. Value, date in legend 1ORE/UTZ Die Axis: 12
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

Record ID: WMID-E825AE
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
Fragment of cast copper alloy Medieval to Post Medieval cooking vessel rim sherd, probably from a cauldron or skillet, dating from c. AD 1200-1800. The fragment consists of the edge of the vessel. The rim has a triangular cross-section and the rest of the vessel is rectangular in cross-section. It has no decoration present.  The vessel fragment is black with traces of green and red in colour and has an uneven surface patina. The fragment is blackened on both sides.  It measures 22.8mm in length and 52.4mm in width. It has a thickness at the rim of …
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E80334
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius II, Arles, reverse GLORIA EXERCITVS 2 standard type, mintmark [single branch]//SCONST, AD330-5
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E7F2C8
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A incomplete copper-alloy buckle frame of Medieval date. It is D shaped, and is missing a bar and pin. It has a lipped frame and a notched lip flanked by paired ridges.  Length:13.46mm Width: 21.03mm Weight: 1.05g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: WMID-E7E85C
Object type: MEDALLION
Broad period: MODERN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy medallion or pendant, dating to the Modern period (AD 1800-1900).  The medallion is circular in plan and sub-rectangular in cross section. The obverse is decorated in high relief and consists of a horizontal trapezoidal base and then three rhombus shapes diagonally radiating from the base and descending in size. This creates a sub-triangular decoration. Above this are incised lines radiating outwards to the triangular decoration, most likely representing sun-rays. The reverse is also decorated in high relief and consists of 5 reclining figures with…
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E7E3E6
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy as of Nero, obverse head right, reverse Victory with shield left, badly corroded, AD64-8
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E7DE4A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy buckle frame of Medieval date. It is rectangular in shape, and only the outer edge remains. At each end there are knops, with incised crosses in each knop. There is an elaborately moulded pin rest, suggesting a late 14th century date (Griffiths et all, 2007, pg 84). Length: 12.13mm Width: 21.94mm Weight: 2.95g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

Record ID: LEIC-E7DDA9
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of the House of Constantine, dating to c.AD 330 - 337. Reece Period 17. GLORIA EXERCITVS, reverse type shows two soldiers with two standards. Mint uncertain. Diameter: 15.4 mm Weight: 1.91 g
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E7D227
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy sestertius of Antoninus Pius, Rome, obverse [...], laureate head right, reverse [...], female seated left, very worn, AD138-61
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E7CC6D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy buckle frame of Medieval date. It is D shaped, with an offset narrowed bar.. No decoration is evident, the pin is still in situ. Similar examples can be seen in Egan and Pritchard, 1991, pg 70, fig42, 271 and 274. Length: 14.83mm Width: 16.08mm Weight: 1.34g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: LEIC-E7C550
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of the House of Constantine, dating to c.AD 330 - 337. Reece Period 17. GLORIA EXERCITVS, reverse type shows two soldiers with two standards. Mint uncertain. Diameter: 16.6 mm Weight: 1.78 g
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E7C16C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy buckle frame of Medieval date. It is D shaped, with an offset narrowed bar, which protrudes slightly at the side. No decoration is evident, the pin is still in situ. Similar examples can be seen in Egan and Pritchard, 1991, pg 70, fig42, 271 and 274. Length: 16.20mm Width: 17.56mm Weight: 1.51g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-E7B112
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy buckle frame of Medieval date. It is D shaped, with an offset narrowed bar. No decoration is evident. The pin is missing. Length: 13.23mm Width: 16.22mm Weight: 1.39g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: LEIC-E7AA38
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of Gratian, dating to c. AD 367 - 375. Reece Period 19. GLORIA NOVI SAECVLI, reverse type shows Emperor, head left, standing facing, holding labarum in right hand and resting left on shield. Mint of Arles. RIC IX Arelate 15 Diameter: 18 mm Weight: 2.26 g
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-E7A0F4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy buckle frame of Medieval date. It is rectangular in shape, with two knops either side on the outer frame, and a moulded pin rest in the centre, with a bar offset & narrowed, with two smaller circular knops at each edge of the bar.  Length: 14.04mm Width: 14.02mm Weight: 1.20g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-E75582
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy buckle frame of Medieval date. It is sub-round in shape, with three grooves at the outer edge, the outer two grooves emphasised by flanges, and an offset bar. The pin is missing. Similar examples can be seen in Egan and Pritchard, 1991, pg 73, fig 44, p297. Length: 21.76mm Width: 21.36mm Weight: 2.36g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SF-E726A9
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Published
A fragment of a copper-alloy Roman Colcheser derivate, Harlow CD Ha brooch. Only part of the bow and wings remain. The wings are broken at both ends, and all that remains are the remains of a pierced lug, suggesting it is a probable Colchester Dertivative double pierced lug.  Length: 12.45mm Width: 8.98/mm Weight: 1.24g
Created on: Thursday 4th April 2024
Last updated: Monday 8th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: SF-E70FDD
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only part of the bow and wings remain. It is T shaped, the bow is flat and rectangular in cross section. The wings are short and are semi-circular in cross section, and would have held the missing springcoil and pin. There is a moulded central rib on the bow. Length: 19.19mm Width: 12.15mm Weight: 1.14g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: IOW-E6FC16
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Post Medieval copper alloy trade token, c.AD 1654. Worn on both faces. Obverse: Unclear design of a pot of lilacs in centre. Legend: [THOMAS . IVNNINGE] Reverse: [OF . NEWPORTE . 1654] with T.I. in centre.
Created on: Thursday 4th April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-E6F963
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Post Medieval copper alloy trade token, c.AD 1600-1700. Worn on both faces. Obverse: Unclear design in centre, legend unclear due to wear. Reverse: [...] ISLE OF W[ITE] with T.T. in centre.
Created on: Thursday 4th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-E6F54B
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Post Medieval copper alloy trade token of the tallowchandler Will Hannam of Newport, c.AD 1600-1700. Worn on both faces. Obverse: Unclear tallowchandlers' Arms. Legend: [WILL . HANNAM . NEW] Reverse: W . H. Legend: [PORT . ISLE . W]ITE
Created on: Thursday 4th April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: SF-E6F073
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only part of the bow and wings remain. It is T shaped, the bow is flat and rectangular in cross section. The wings are short. It is very corroded and worn. No decoration is evident.  Length: 17.16mm Width: 17.75mm Weight: 2.38g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: IOW-E6EE9E
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Roman copper alloy sestercius, heavily worn on both faces and with abraded edges.
Created on: Thursday 4th April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-E6E9EA
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Medieval cast copper alloy seal matrix, c.AD 1200-1350. This is a seal matrix in the shape of a pointed oval, with the remains of a integral lug on the reverse face. This matrix is heavily worn on all faces; the central design and inscriptions have been destroyed.
Created on: Thursday 4th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-E6E726
Object type: COIN
Broad period: IRON AGE
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete copper alloy uninscribed stater, c.50 BC-AD 50 (Spink 371 - end date as of Spink 2003), possible Durotriges mint. Worn on both faces. Obverse: Devolved Apollo head. Reverse: Disjointed horse.
Created on: Thursday 4th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: SF-E6E437
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only part of the bow and catchplate remain, it is very worn. The bow is flat, with rectangular cross section, on the front face are two longitudinal grooves below which is a moulded transverse groove, which tapers into a triangular shape before terminating in an old break. To the reverse are the remains of a catchplate. It has the remains of a white metal coating. Length: 23.04mm Width: 10.39mm Weight: 1.73g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: IOW-E6E324
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Post Medieval copper alloy sword belt fitting, c.AD 1500-1700. This fitting consists of a cast plate and integral hook. The plate is flat with moulded foliate or vine scroll decoration. It has a trefoil terminal with two rivet holes, which have traces of rusted iron rivets. It has a trefoil terminal and a tapering body that ends in lobed terminal with a round hook, which terminates in an old, worn break.
Created on: Thursday 4th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-E6D8C7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Post Medieval copper alloy trade token, porbably of John Barwick of Lymington, c.AD 1667. Worn on both faces, Obverse: [HIS HALFE PENNY]. Legend: lOHN [. BARWICK]. Reverse: I . B between three flowers. Legend: [IN . LiMiNGTON . 1667]
Created on: Thursday 4th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-E6D75B
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Incomplete Post Medieval copper alloy trade token of Arther Legg of Newport, c.AD 1656. Worn on both faces. Obverse: The  Grocers'  Arms. Legend: ARTH[ER . LEGG] . 16[56]  Reverse: L . A . I Legend: [OF . NEWPORT ...]
Created on: Thursday 4th April 2024
Last updated: Thursday 18th April 2024
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: SF-E6D2CE
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only part of the bow remains, it appears to have a central rib. It has iron corrosion encrusting the surface, and is very worn.  Length: 25.62mm Width: 5.90mm Weight: 1.61g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: SF-E6C406
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only part of the bow remains, terminating in a globular oval, with transverse grooves. It has iron corrosion encrusting the surface, and is very worn.  Length: 22.95mm Width: 6.97mm Weight: 1.28g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

Record ID: SF-E6B6B3
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only part of the bow remains, which is corroded and worn. There is some transverse moulding on the bow. It is bent at a 45 degree angle at one end, and broadly circular in cross-section. Length: 32.05mm Width: 5.83mm Weight: 3.66g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: LEIC-E69714
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of Valentinian I, dating to c. AD 364 - 378. Reece Period 19. SECVRITAS REIPVBLICAE, reverse type shows Victory walking left holding a wreath. Uncertain mint. Diameter: 16.4 mm Weight: 1.66 g
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: LIN-E5EBA4
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman Colchester Derivative Hinged brooch dating to c. AD 43-120. The spring, the majority of the wings and the whole pin are all missing due to old breaks. Only a short portion of the wings on the back of the bow has survived, which is tubular. The bow is D-shaped in cross-section and tapers to a rounded foot. At both sides of the upper portion of the bow are moulded oblique ridges. A central raised ridge extends from the top to the bottom of the bow which has a single row of fine oblique grooves. At both edges of the bow is a single longitud…
Created on: Thursday 4th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Near Louth', grid reference and parish protected.

Record ID: LIN-E5B28D
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman Colchester derivative Polden Hill bow brooch dating to c. AD 75-175. The catchplate, spring and pin are all missing due to old breaks. It has semi-cylindrical wings that are extended flat circular ends with pierced holes to encase the now missing spring. At the centre of the wings is a worn and incomplete rear-facing hook that would have held in place the axis bar. The front faces of the wings are decorated with incised longitudinal grooves. The bow itself is oval shaped in cross-section. At both sides of the wings is a moulded raised semi-ci…
Created on: Thursday 4th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Near Louth', grid reference and parish protected.

Record ID: LIN-E565E1
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Roman Colchester derivative hinged brooch dating to c.AD 43-120. The tubular wings enclose an axis bar, with a rectangular slot in the centre for the pin; the pin has not survived. The wings are damaged at one end, the other has a circumferential groove at the cap. The bow springs out from the wings, it is curved and D-shaped in cross-section. No visible decoration on the bow and it terminates with an old break. Missing its pin and catchplate. Dark green patina. Length: 22.84 mm; Width: 24.18 mm; Thickness: 6.79 mm; Weight: 5.25g
Created on: Thursday 4th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Near Louth', grid reference and parish protected.

Record ID: KENT-D7903D
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An incomplete Post-Medieval cast copper alloy 'fob' seal matrix set with a glass intaglio, dating to the 18th-19th Century. Description: In plan, the seal is rectangular with rounded corners. The bezel band is decorated by a series of raised chevrons. The reverse is pyramidal in form with concave moulding along the lower edges and a central circular hole at the apex (where the handle would originally have been attached). A series of fine grooves radiate from the central hole over the upper part of the pyramid. There are traces of gilding and areas of darker brown patinate…
Created on: Wednesday 3rd April 2024
Last updated: Monday 8th April 2024
Spatial data recorded.

Record ID: DYFED-D776EF
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Pembrokeshire
Workflow stage: Awaiting validation
Object is an incomplete, small, copper alloy flat axehead, probably dating from the Early Bronze Age period (c. BC 2350 - c. BC 2050). The axe is broadly rectangular in plan with a slightly splayed crescentric blade. The sides of the axe gently taper outwards with a shallow curve, from the rounded butt to the blade. The surfaces are flat and do not show any signs of side flanges. The axehead has suffered significant loss from corrosion on all surfaces, and is pitmarked and edges worn and rounded. It has an overall browny red and green patina. There are several…
Created on: Wednesday 3rd April 2024
Last updated: Friday 5th April 2024
Spatial data recorded. This findspot is known as 'Slebech', grid reference and parish protected.

Record ID: DYFED-D71CAE
Object type: SEAL
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Object is a complete copper alloy seal matrix of Medieval date (approx 1200-1400). The seal matrix is circular in shape. The obverse features a central motif of a bird holding a branch? head facing its wing (possibly a dove or an eagle) set within a beaded border. The legend around the circumference reads X SIGILLVM AMORIS meaning Seal of Love. The reverse is undecorated, is flat save for a slight central, vertical ridge which results in a complete suspension loop. Overall the seal matrix is in good condition but the central motif is quite damaged and the exact…
Created on: Wednesday 3rd April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'Wenvoe', grid reference and parish protected.

Record ID: NLM-D69BAE
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap fitting. A pair of conjoined cast loops of round section: the larger circular and the smaller an oval-ended rounded form appended. Probably from horse furniture. Suggested date: Post-Medieval, 1800-1900 Length: 43.7mm, Height: 34.1mm, Thickness (larger loop): 4.5mm, Weight: 15.40gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: NLM-D67F6B
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle. A small cast rectangular frame, plain, with opposed housings for a separate steel spindle [lost]. Suggested date: Post-Medieval, 1720-1790 Length: 18.9mm, Height: 17.9mm, Thickness (at housing): 3.2mm, Weight: 1.68gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: SUSS-D64C88
Object type: HARNESS FITTING
Broad period: IRON AGE
County: East Sussex
Workflow stage: Awaiting validation
A complete worn cast copper alloy miniature terret ring of late Iron Age to early Roman date, c. AD 200BC - AD100.  The terret ring is oval with a circular cross-section and narrows in width and thickness on one longer curved side possibly accentuated from wear on the external edge. On the opposing side the hoop expands into a moulded transverse collar/lobe with a wedge shaped side profile which projects slightly on the interior of the hoop, (creating a kidney shaped aperture), and is more pronounced on the external edge. The hoop flares at the moulded collar&…
Created on: Wednesday 3rd April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: NLM-D646F8
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus indeterminate, later Roman issue of 330-410 on a small chipped and worn oval flan. Obverse description: bust possibly left. All other detail lost. Diameter: 15.4mm, Weight: 0.78gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: NLM-D624A3
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin weight, as kindly identified by the finder. Cast square uniface weight with an indeterminate motif within a circular panel struck on one side only. The uniface square weight is usually of Low Countries or German origin and of 16th or 17th-century date. Some checked the weight of the Angel gold coin or its subdivisions (Withers and Withers 2011, page 27). Suggested date: Post-Medieval, 1500-1650 Length: 13.8mm, Width: 13.7mm, Thickness: 1.9mm, Weight: 2.54gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: WMID-D609FD
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete enamelled copper alloy heraldic horse harness pendant of medieval dating (c. AD 1250 to c. AD 1450). The pendant is of the 'heater'-shaped shield type (a flat top, with sides that curve steeply to a point). Attached to the flat top is an incomplete stump for the missing suspension loop and is set at a right angle to the rest of the pendant. The front of the pendant features heraldic decoration. This decoration consists of a thick central border running from left to right. Above the border are three saltires in a horizontal line…
Created on: Wednesday 3rd April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded.

Record ID: WMID-D5DDFF
Object type: MOUNT
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A complete copper alloy bar mount dating to the Medieval period (c. AD 1150 - 1350). The object is elongated in form with a central perforated circular lobe and two arms extending from opposite sides that present a smaller sub-rectangular terminal lobe on each end. The object has a D-shaped cross section.  The terminal lobes each have a copper alloy rivet in place. Both terminal lobes are filled with soil and has some corrosion on the reverse. The arms and central lobe are decorated with transverse incised grooves. The reverse is flat and undecorated. The mount&nb…
Created on: Wednesday 3rd April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

Record ID: NLM-D5A392
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap fitting. Cast round-section D-shaped loop. Suggested date: Post-Medieval, 1800-1900 Length: 23.6mm, Height: 29.3mm, Thickness: 3.7mm, Weight: 6.43gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'South Owersby', grid reference and parish protected.

Record ID: NMS-D593CC
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval heraldic stud or mount, the front plate now distorted; - of green and brown/purple patination with large projecting square sectioned spike mounted slightly off-centre on the reverse, the face is shield shaped, Or (guilded field, now only patchily gilded) an eagle displayed, neatly engraved but now missing its enamel infill, likely to have been Sable (black), perhaps indicating the arms for Richard, Earl of Cornwall and Poitou, younger brother of Henry III, after his election as King of the Romans in 1257 (Or a double-headed eagle displayed Sable) (d.1272) or of his son Edmund,…
Created on: Wednesday 3rd April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: NLM-D587AC
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Probably an As or dupondius indeterminate, early Roman issue of 43-200 retaining no discernible detail on either side. Diameter: 25.2mm, Weight: 8.68gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'South Owersby', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-D55A9A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy farthing token of King's Lynn Corporation, badly corroded, presumably 1669
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded.

Record ID: NLM-D5540A
Object type: BRIDLE FITTING
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible bridle fitting fragment. A part of a cast and probably oval loop, separated by a bulbous moulding from a constricted round-section bar across which it is broken. Fiercely abraded. Suggested date: Early Medieval, 900-1100 Length: 30.9mm, Width: 23.8mm, Thickness: 8.2mm, Weight: 12.60gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'South Owersby', grid reference and parish protected.

Record ID: SF-D546F1
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy domed boss disc brooch dating to 80-250 AD. It is missing it's pin, catchplate and is worn around the edge. There are two concentric circles around the boss, and five triangules terminating in a circle, which are raised, and have a silvery colour.  Similar examples can be seen in Mackreth, 2011 pg 110, plate 109, 11588. Diameter: 25.36mm Thickness: 5.38mm Weight: 3.41g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: SF-D52BF6
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy flat enamelled disc brooch dating to 80-250 AD. It is missing it's pin, catchplate and is worn around the edge. It would have been enamelled, with eight peripheral lugs. The eight equidistantly spaced flat circular lugs around the flat perimter plate have a six petalled flower design, which reflects the central deisgn on the plate. One of the lugs appears to have been pierced potentially as a chain loop.  Similar examples can be seen in Mackreth, 2011 pg 110, plate 108, 11180. Diameter:27.33mm Thickness: 2.09mm Weight: 3.69g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: DYFED-D4F92E
Object type: COIN
Broad period: UNKNOWN
County: Pembrokeshire
Workflow stage: Awaiting validation
Object is a complete copper alloy coin of unknown date. But may possibly date to the Roman period. Both the obverse and reverse are corroded and bear no identifying features. The coin has a green and brown patina and an uneven, corroded surface.
Created on: Wednesday 3rd April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded. This findspot is known as 'The Havens', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-D4EDD2
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy flat enamelled disc brooch dating to 80-250 AD. It is missing pin, spring, and is worn around the edge. Concentric bands divide face into enamelled rings with the remains of blue enamel in the outer band, with ten small projecting lugs around the outside. Similar examples can be seen in Mackreth, 2011 pg 110, plate 107, 11609-10764, and Blagg et al, 2004, pg 102, 174.  Diameter: 22.15mm Thickness: 1.92mm Weight: 1.92g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: NLM-D4C9DE
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy thimble. A small conical pressed metal thimble with a plain basal zone and machine-stamped pits on its wall which appear as if arranged in horizontal rows. A rectilinear grid or lattice of larger pits covers the domed top. Suggested date: Post-Medieval, 1850-1900 Height: 13.5mm, Diameter: 13.3mm, Thickness (wall): 0.7mm, Weight: 1.51gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'South Owersby', grid reference and parish protected.

Record ID: NLM-D4976E
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap fitting. Cast straight-sided bar or plate with thickened and angled ends retaining the stubs of iron fixing pins, presumably attached to leather to confine or guide another strap. Suggested date: Post-Medieval, 1800-1900 Length: 31.4mm, Width: 10.2mm, Thickness (at ends): 6.3mm, Weight: 1.73gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: DYFED-D468D6
Object type: SWORD
Broad period: POST MEDIEVAL
County: Pembrokeshire
Workflow stage: Awaiting validation
An incomplete decorative copper-alloy sword/dagger hilt of probably Post Medieval date (possibly 17th-19th Century). The section comprises a decorative guard which include the remnant of finger loops and quillions, all of which have damage to them and are incomplete. The central block is rectangular with a moulded socket below - which would have fitted onto a pommel. The obverse and reverse of the central block are decorated with a man (possibly a warrior) holding a spear in his right hand and what appears to be a shield in his left. He appears to be wearing baggy pantaloons.…
Created on: Wednesday 3rd April 2024
Last updated: Friday 5th April 2024
Spatial data recorded. This findspot is known as 'Pembroke', grid reference and parish protected.

Record ID: OXON-D4645C
Object type: CLASP
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy clasp dating to the early/mid Post-Medieval period (c. AD 1500-1900) of Read's Class F, Type 1 asymmetrical single blunt-hooked and eye clasp. The clasp is formed of a single plate with moulded-relief and openwork.  This is the hook-section of the class formed by an open-work heart-shaped design.   From the upper section protrudes a small T-shaped toggle from the centre of which expands a recessed rectangular section. Below the heart design, both outside edges of which have a slightly rounded knop and either end of…
Created on: Wednesday 3rd April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded.

Record ID: NLM-D4522B
Object type: FERRULE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy ferrule or mount. A tubular and probably stamped binding mount from a whip stock, cane or similar, of cylindrical or tubular form with butted seam, now flattened. Vegetal curls appear against a finely vertically lined ground within narrow upper and lower borders. A fixing hole of diameter 2mm appears close to one edge (as found). Suggested date: Post-Medieval, 1850-1900 Length: 12.6mm, Width: 16.1mm, Thickness (overall as found): 2.1mm, Weight: 2.42gms
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: LEIC-D43089
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of Gratian, dating to c. AD 367 - 375. Reece Period 19. GLORIA NOVI SAECVLI, reverse type shows Emperor, head left, standing facing, holding labarum in right hand and resting left on shield. Mint of Arles. RIC IX Arelate 15 Diameter: 17.4 mm Weight: 1.96 g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded.

Record ID: SF-D417C8
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a worn copper-alloy Roman brooch. Only a portion of the bow and catchplate remain. The bow is a flattened oval in cross section, with no decoration evident, but with a flat foot. The triangular catchplate is complete. Length: 19.59mm Width: 9.66mm Weight: 1.15g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: SF-D40CDA
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only a portion of the bow and catchplate remain. The bow is broadly circular in cross section, with incised transverse grooves at the foot. The catchplate is incomplete, with a pierced triangular hole. The foot is flat.  Length: 17.97mm Width: 10.33mm Weight: 1.29g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: SF-D40183
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only a portion of the bow and catchplate remain. There is incised rocker decoration on the bow, and a rib, with an oval cross-section. The catchplate is incomplete. Length: 20.13mm Width:8.59mm Weight: 1.86g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: SF-D3F831
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only a portion of the bow and catchplate remain. There is incised rocker decoration on the bow, and a rib, which has a flat cross-section. The catchplate is incomplete, and is pierced, with the remains of a further pierced hole, potentially triangular shaped. Length: 29.91mm Width:7.75mm Weight: 1.81g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: NLM-D3F7D7
Object type: BADGE
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy badge. Cast discoid lapel badge – actually of cross pattee form with recesses between the ends of each pair of adjacent arms and a semi-sircular recess in each angle, and with a crescentic lug for attachment in a buttonhole brazed to the back. The legend: ONE HEART ONE WAY around a W G monogram identifies this as a badge worn by a member of the Wesley Guild, an organisation dedicated to the recruitment and retention of young people to that Nonconformist Christian faith. The legend appears in pale green letters as does the monogram, against white labels and a dark blu…
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: SF-D3E81F
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only a portion of the bow and catchplate remain. There is no decoration on the bow, but has a slight rib. The triangular shaped catchplate has incised transverse grooves on the foot. Length: 23.49mm Width:10.75mm Weight: 2.19g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

Record ID: SF-D3DC9A
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman brooch. Only a portion of the bow and catchplate remain. There is no decoration on the bow. The triangular shaped catchplate has a knobbed foot. Length: 23.42mm Width: 9.14mm Weight: 1.01g
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.