• 

  Image not taken

Record ID: NMS-E592A1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Possible copper alloy coin, either an irregular radiate or nummus on a small flan or a Theodosian nummus, further details illegible, c.AD275-402
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E3383A
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Norfolk
Workflow stage: Awaiting validation
Fragment of late Iron Age copper-alloy D-shaped terret, now very corroded but perhaps originally enamelled. It has a sub-circular or slightly oval upright collar terminal 13.7mm wide, 12.1mm tall and 4.8mm thick. From one side of this projects a triangular-section upper ring, with a flat inner and an angled outer. On the other side of the collar, at its base, is a stub of the attachment bar which shows that this was rectangular-section, 6.5 x 3.4mm, and set vertically. The overall length is 21.0mm and it weighs 7.34g. All surfaces of the fragment, including the breaks,&…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D47080
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantine I, Trier, reverse VICTORIAE LAETAE PRINC PERP type, mintmark *//[pellet]STR, RIC VII, 221, AD319
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D448FD
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Theodora, Trier, reverse PIETAS ROMANA type, mintmark illegible, AD337-41
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D43913
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constans, Trier, reverse VICTORIAE DD AVGG Q NN type, mintmark leaf//[...], AD341-8
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D42A5B
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantine I, Lyons, reverse GLORIA EXERCITVS 2 standard type, mintmark [pellet-in-crescent], AD330-5
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D40FBC
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy radiate of Tetricus I, reverse PAX AVG derivative, weight 2.13g, die axis 7, c.AD275-86
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D383C3
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy dupondius of Hadrian, Rome, reverse VIRTVTI AVGVSTI, RIC II, 605f (drapery at far shoulder), light wear, weight 12.36g, AD119-21
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D36646
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy farthing of Charles I, crude legends and long cross initial mark, 0.45g, c.1625-34
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D30121
Object type: COIN
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Silver penny of Edward III, florin type, London, reversed Roman Ns on obverse, lombardic on reverse, Type 4, North 1116, worn, 1344-51
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D2C402
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
About half of the flat circular frame of an early Anglo-Saxon copper-alloy annular brooch, with an original diameter of c. 40mm. One break is across a neat rounded hole in the frame. This may be the pin hole, but on the reverse there is solder around the hole and it may possibly alternatively be a repair. There is also some iron corrosion on the reverse here, which could be from the pin. The frame is otherwise well preserved here, and at 6.1mm wide appears to retain its original width. The inner edge is 1.2mm thick and it tapers towards the outer edge which is 0.6mm thick. Th…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D1F2A7
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Constantine (one of the three Caesars), reverse GLORIA EXERCITVS 1 standard type, mintmark illegible, AD335-7
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D1DD1F
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy farthing token of Nicholas Withers of Norwich, Norweb 3217, die axis 12, 1658
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D16462
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of copper alloy, probably a small piece of foot from an early Anglo-Saxon cruciform brooch. The fragment is C-shaped in cross-section, hollow on the reverse, and is broken at both ends (one break fairly fresh and granular, the other more worn). At one end, the front has a bold moulding, 4-5mm deep and flat-topped, which is divided into two by an off-centre transverse groove. The overall surviving length is 21.1mm, maximum width 12.8mm and maximum thickness (at moulding) 6.0mm. It weighs 4.93g. It seems likely that this is one of the mouldings at the top of a horse's …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0E282
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat, apparently undecorated headplate has a sub-rectangular central panel with three flat 'knobs', all of which appear to have been mushroom-shaped, or D-shaped above narrowed waists. This shape of headplate is often known as 'trefoil'. On the reverse of the headplate is a broken pin bar lug (worn breaks) with iron staining around it. All the edges of the headplate are worn. The bow is D-shaped in cross-section, quite highly arched and simple, with a groove across the top the onl…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0BB0C
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat headplate is very worn and its original shape is uncertain, but it has the remains of deep U-shaped cut-outs in both its lower edge and its upper corners, forming three knobs. These may have had straight ends, as the top and one side knob each retain a straight row of crescentic stamps along their edges. On the reverse of the headplate is a large double pin bar lug, one lug incomplete and the other retaining part of an iron pin bar. There is extensive iron corrosion between the two lugs.  The bow…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D07466
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Complete early Anglo-Saxon copper-alloy small-long brooch, now in two joining parts. The head is of the 'cross potent' type, with a flat rectangular central panel c. 13 x 18mm. This has three sub-rectangular flat 'knobs' attached by narrower waists, to form a headplate in total 32.2mm wide. The surface is corroded and some is missing, but traces of double-crescent or half ring-and-dot stamps can be seen; there is a row of five on the top knob and a similar row on one side knob, each with a trace of a single groove outside the row of stamps. On the reverse of the headpla…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D012DB
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of early Anglo-Saxon copper-alloy girdle-hanger. Using Felder's terminology (2014, 35, fig. 3.1), the fragment consists of the suspension loop, shank neck and part of shank, with a granular, unworn break. The suspension loop is a narrow, rounded lobe at the top, pierced from side to side, but the perforation is now blocked with iron corrosion. The shank neck is a D-section area below the suspension loop, divided into five rounded lobes; its junction with the shank is marked with a transverse ridge. The shank itself is rectangular-section and flares very slightly …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CF59E4
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Chunky copper-alloy bar from an early Anglo-Saxon wrist-clasp, apparently of Hines Form B10 or possibly alternatively B4. The bar is cast in one piece, with three cuboidal elements, one in the centre and one at either end. These are linked by D-section areas, each one decorated with two broad U-section transverse grooves or flutes, alternating with three ridges each flanked by narrow grooves. Each of the cuboidal bosses has a substantial white-metal coating, probably of tin. On the flat reverse there are two broken pierced lugs, set transversely and pierced longitudinally. Length 40.3…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CE5E22
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Early Anglo-Saxon copper-alloy wrist-clasp of Hines's Form B20, in very good condition. It is largely flat, and cast in one piece, with a raised, flat-topped bar, a plate with shaped rear edge, and a complete loop. The bar is c. 6mm wide and has two zones of transverse groove decoration, not perfectly evenly spaced along its length; both consist of a wider U-section groove flanked by two similar slightly narrower grooves. The rear edge of the bar has a longitudinal step intermediate in height between the bar and the rest of the plate. The rear edge of the plate is flatte…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-936FDD
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy sestertius of uncertain Antonine emperor, Rome, reverse Victory standing right inscribing shield, c.AD161-92
Created on: Friday 12th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-935504
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy farthing token of Norwich Corporation, die axis 12 o'clock, 1668
Created on: Friday 12th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-65D4E4
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Heavily worn post-medieval square copper-alloy coin weight. It has a barely perceptible stamped image, probably of a hand, within a circular beaded border on one face but no surviving trace of a design on the other. The hand signifies Antwerp as the issuing town. The metal is patinated pale reddish-brown overlain with patches of pale to mid-green. Late 16th to mid-17th century. Length: 15.1mm. Width 14.7mm. Thickness: 2.0mm. Weight. 2.3g 
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-658148
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Post-medieval copper-alloy coin weight for a Scottish thistle crown of James I (revalued). Square and biface, obverse I R flanking a thistle, reverse IIII [S] / 4D ½, both within a circular beaded border. Cf. Withers and Withers (1995) p15. A.D. 1603-25. Length: 12.9mm. Width 12.4mm. Thickness: 1.9mm. Weight. 1.6g   
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-558A04
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Incomplete copper alloy English Medieval jetton with a clasp riveted to what would have been the obverse, showing a shield of Arms and a border of alternating dashes and rosettes. The other side, intended to be displayed, shoes a triple armed cross moline fleurry with one dash in each quadrant of the outer circle and alternating crescents and stars in the inner quadrants. This jetton has been turned into a clasp or brooch in the same way as a number of others noted by Marsden in Norfolk Archaeology 2014, pp.92. Invariably the reverse was displayed, making it clear that the cross was th…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-555A7B
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy Nuremberg rose-orb jetton of uncertain master of the Scultes family, c,1584-1612
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-553FF3
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Corroded remains of a copper alloy radiate or nummus, utterly illegible, c.AD260-378
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-553161
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy radiate of Tetricus II, reverse SALVS AVGG derivative with Salus standing left and feeding serpent arising from altar, weight 1.48g, c.AD275-86
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-551FF6
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Gratian, reverse GLORIA NOVI SAECVLI type, Arles, details illegible, AD367-75
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-53E4F3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy farthing token of Thomas Cannon of Swaffham, Williamson 245, die axis 9, 1667
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-53C6A3
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantine, London, obverse [...]INVS AG, laureate * cuirassed bust right, reverse SOLI INVICTO COMIT type, mintmark S/[..]//[...], further details illegible, c.AD314-7
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-53AD9A
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy nummus, House of Constantine, CONSTANTINOPOLIS Victory on prow type, 0.64g, further details illegible, c.AD330-48
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-539FCB
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy coin, probably a radiate or nummus, corroded and utterly illegible, c.AD260-378
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-51F41A
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy Q-radiate of Allectus, reverse galley, further details illegible, AD293-6
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-51EB53
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy radiate or nummus, probably a GLORIA ROMANORVM type of Magnentius, AD350-1
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-51D1DB
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Valentinian, reverse SECVRITAS REIPVBLICAE type, mintmark [O]F/[...]///[...], AD367-75
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-51C2EE
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy radiate or nummus, utterly illegible, probably irregular, c.AD275-402
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-51B2D5
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy nummus of Constantius II, reverse GLORIA EXERCITVS 2 standard type derivative, mintmark illegible, die axis 12, c.AD330-48
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-519653
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Constantine, Trier, reverse GLORIA EXERCITVS 1 standard type, mintmark M//[...], AD337-41
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-516139
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Constantine, further details illegible, c.AD335-64
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-514E4B
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloynummus, uncertain, probably a VOT/XV/MVLT/XX type of Gratian, in which case AD378-83
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-51361A
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy radiate of Tetricus II, reverse probably PAX AVG, AD273-4
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-5119A9
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy as or dupondius of Hadrian, Rome, obverse head or bust right, reverse standing female left, further details illegible, extremely worn, c.AD134-8
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-510335
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy as of Faustina II or Lucilla, Rome, reverse standing female, further details illegible, AD147-75
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-50F476
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Magnentius or Decentius, reverse probably Two Victories holding shield, further details illegible, AD350-3
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-50D786
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Helena, reverse PAX PVBLICA, further details illegible, AD337-41 
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-50B8AF
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy radiate of Victorinus, probably a Mint II type with SALVS AVG reverse of Salus feeding a serpent held in her arms, AD269-71
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-507CE6
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Roman copper alloy radiates or nummi (2), corroded & utterly illegible, c.AD260-378
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-3D05C1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
A Roman copper-alloy dupondius of Hadrian (AD 117-138) dating to AD 134-138 (Reece Period 6). HILARITAS P R COS III S C reverse type depicting Hilaritas standing left holding long palm in right hand and cornucopiae in left' on left, a small boy standing right lays hands on palm; on right a small girl standing left. Mint of Rome. As RIC II (first edition), pg 649, no 974. 
Created on: Monday 8th April 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E89094
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius II, Lyons, reverse GLORIA EXERCITVS 2 standard type, mintmark [...S?]LG, AD330-5
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E850F1
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius II, Trier, reverse GLORIA EXERCITVS 1 standard type, mintmark M//[...], AD337-41
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E80334
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius II, Arles, reverse GLORIA EXERCITVS 2 standard type, mintmark [single branch]//SCONST, AD330-5
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E7E3E6
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy as of Nero, obverse head right, reverse Victory with shield left, badly corroded, AD64-8
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E7D227
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy sestertius of Antoninus Pius, Rome, obverse [...], laureate head right, reverse [...], female seated left, very worn, AD138-61
Created on: Thursday 4th April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: NMS-D593CC
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval heraldic stud or mount, the front plate now distorted; - of green and brown/purple patination with large projecting square sectioned spike mounted slightly off-centre on the reverse, the face is shield shaped, Or (guilded field, now only patchily gilded) an eagle displayed, neatly engraved but now missing its enamel infill, likely to have been Sable (black), perhaps indicating the arms for Richard, Earl of Cornwall and Poitou, younger brother of Henry III, after his election as King of the Romans in 1257 (Or a double-headed eagle displayed Sable) (d.1272) or of his son Edmund,…
Created on: Wednesday 3rd April 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D55A9A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy farthing token of King's Lynn Corporation, badly corroded, presumably 1669
Created on: Wednesday 3rd April 2024
Last updated: Wednesday 3rd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-448764
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Early Medieval copper-alloy small long/cruciform brooch dating to circa AD 450-570. The extant element is virtually complete save for the apex of the head and the lower foot, terminal and pin. The head plate is flat and rectangular. It terminates in old breaks on each of its edges and it is, therefore, unclear whether there would have been attached any side knops or integrally cast elements. The headplate is undecorated. The bow emerges from the lower edge of the headplate. It is curved in profile and plano-convex in section. Running down the centre is a lo…
Created on: Wednesday 27th March 2024
Last updated: Friday 12th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-4343DA
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A fragment of an Early Medieval copper-alloy cruciform brooch dating to circa AD 475-550. The extant piece consists of a side knop which would have been attached to the headplate of the brooch.. It is dumbbell shaped in plan and plano-convex in section, with a flat reverse. The front face consists of two lobes joined by a constricted mid-setion. Each lobe is decorated with three incised transverse grooves. At the efge of one of the lobes is a shall median rectangular groove which would have facilitated attachment to the brooch. It is now covered with iron staining.  Half-rou…
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-40477C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A complete Medieval copper-alloy Medieval buckle dating to circa AD 1250-1350. It is a comprised of a single rectangular looped frame. The frame is rectangular sectioned. The outer edge carries a separately made copper alloy roller in which the externally made pin rests. The pin is wrapped around the bar and tapers into a point. It is rectangular sectioned. The buckle is consistent with Meols Type 12 (Griffiths, Philpott and Egan 2006). Length: 16.5mm; Width: 17.4mm; Thickness: 5.3mm; Weight: 3.88g.
Created on: Wednesday 27th March 2024
Last updated: Monday 1st April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-400F06
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of the House of Constantine (AD 306-364) dating to AD 330-331 (Reece Period 17). Victory on prow reverse type [CONSTANTINOPOLIS]. Mint of Arles. As RIC VII, pg 271, no 344. 
Created on: Wednesday 27th March 2024
Last updated: Wednesday 27th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2E3B84
Object type: JETTON
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Medieval copper-alloy French Jetton dating to circa AD 1418-1437. Crown type, probably minted in Paris. As Mitchiner 1988: nos 538-539 Obv: Crown with large central lis and two lateral lis. [A]VE MARIA [GRACIA PLENA] Rev: Triple stranded straight cross flouretty within ornamental four arched tressure. 
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2C2E87
Object type: JETTON
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Medieval copper-alloy French jetton issued by Charles VI dating to circa AD 1380-1422. Shield of French type. As Mitchiner 1988: nos 440-459. Obv: Shield of France modern. [] Rev: Triple standard cross flouretty within 4 arched tressure. []
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2BEB91
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A probable Medieval copper-alloy harness pendant dating to circa AD 1200-1400. Plano-convex in section, the piece consists of five - broadly tear-shaped - lobes representing petals arranged in a 2-2-1 formation. At the apex is a transverse projecting collar set below a D-shaped suspension lug. The reverse is plain. The front face retains significant traces of gilding. It has a brown-green patina.  No precise parallel can be found on the database. The gilding would suggest a Medieval date although the patina could potentially suggest a Post Medieval date.  Length: 30.9m…
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2BBBCC
Object type: JETTON
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Medieval copper-alloy Nuremburg rose/orb jetton, anonymous issues,dating to the period c.AD 1500-c.1550. Initial mark not visible. As Mitchiner 1988: nos 1190-1298.
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2B2BA7
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Post Medieval copper-alloy hooked tag (dress fastener) dating to circa AD 1550-1650. The whole piece is plano-convex in section. It is comprised of a rectangular apex loop. The body is sub-circular and openwork. Carrying a symmetrical design, it has two rows of circular openwork elements on each upper flank arranged in a 2-2 formation. In the centre is circular element comprised of circular pellets. The lower element of the front face is decorated with a moulded raised chevron. The hook is now survived only by a short stump. It is consistent with Read 2008: pg …
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2AFBE7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy farthing token of John Greene of King's Lynn, Williamson 83, die axis 6, weight 0.57g (missing edge portion), c.1650-68
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2AF164
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A complete Post Medieval copper-alloy hooked tag (dress fastener) dating to circa AD 1550-1650. It is comprisedof a trapezoidal apex loop which is plano-convex in section. The body is circular with a convex front face and concave reverse. The front face is decorated with a moulded floriate design which is now so heavily worn that it cannot easily be distinguished. Projecting from the lower edge is a plano-convex in section rear facing hook.  It is consistent with Read's 2008 Class E Type 3 dating to the early part of the Post Medieval period.  Length: 19.2mm; …
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2AE49C
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Constantine, VRBS ROMA wolf & twins type, Trier, mintmark [branch]//TRP, AD330-5
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-2A0167
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval copper-alloy buckle dating to circa AD 1200-1400. The extant piece consists of the plate, surviving in two parts, now separated. The plates is formed of two sheets of copper alloy which would have been joined together by rivets. Two circular-sectioned rivets survive on the interior face of the front plate and slot through two circular rivet holes on the other plate, although now are no longer joined due to surrounding breaks. Surrounding the rivet holes on the interior face is organic material which would have formed the strap. The exterior face of one of the pla…
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-29D636
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval copper-alloy buckle dating to circa AD 1350-1500. It is a single D-shaped buckle with integral forked spacer. The piece is complete save for the missing, externally made, sheet metal plate and pin, the latter of which is survived by a rectangular-sectioned loop wrapped around the bar. The frame is plano-convex in section with a median knop projecting from the outer edge. The knop is positioned in front a triangular V-shaped groove in which the pin would have rested. The bar has a raised transverse collar with a median constricted section aroun…
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1AD18C
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval copper-alloy strap end dating to circa AD 1400-1500. The piece consists of a broadly lozengiform terminal, the front face of which carries incised foliate decoration, and a crescentic plate. The piece would have been formed of two crescentic plates joined together, although only the front plate now survives. Projecting from the reverse are two circular rivets.  THe front face of the plate is decorated with an incised permiter border in the interior of which is incised decoration, seemingly following no discernible pattern or arrangement, consisting of hemisp…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1AB5F3
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval copper-alloy spacer from a composite strap end datomg to circa AD 1270-1500. Rectangular-sectioned, the spacer is forked with two pointed prongs emerging from an openwork oval plate which terminatesl in an acordn shaped knop. Only one fork now survives. It tapers gently into a point. The other has broken away. Similar examples are depicted in Egan and Pritchard 2002: pg 141, pl 92. Length: 51.4mm; Width: 20.1mm; Thicknes: 2.1mm; Weight: 4.63g.
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1A718B
Object type: CHAFING DISH
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A complete copper-alloy chafing dish handle of Post Medieval dating to circa AD 1550-1700. The handle can be described in two parts: the loop handle and the attachment. The loop handle is heart-shaped in plan and rectangular-sectioned. It has a straight base functioning as a bar. It has bevelled edges. Both faces of the handle are covered in broadly oblique file marks. Attached to the base is the attachment lug. It is rectangular sectioned with an apex loop, through which the bar runs. The base of the lug is flat with a projecting circular fitting which would have attached to…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1A54FC
Object type: SPUR
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Post Medieval copper-alloy spur dating to circa AD 1650-1800. The extant element consists of terminal of one of the spur's arms and separately made copper alloy strap hook. Arm he arm fragment is broadly rectangular in plan with a plano-convex cross-section and terminates with two loops in a figure of 8 arrangement. I.The loops are rectangular sectioned. One loop retains the strap hook. The spur frame is made from a grey alloy with a high tin content and would have appeared silvery when new. There are now blemishes appearing on the reverse face.&…
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-17EFED
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Irregular copper alloy nummus of Constantius II, reverse FEL TEMP REPARATIO falling horseman derivative, 0.94g, c.AD353-64
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-16F912
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus, House of Constantine, VRBS ROMA wolf & twins type, mintmark and further details illegible, AD330-5
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-16E843
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantine I, Arles, reverse GLORIA EXERCITVS 2 standard type, mintmark [probably leaf]//PCONST, AD330-5
Created on: Monday 25th March 2024
Last updated: Monday 25th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-1681B0
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Post Medieval copper-alloy rose farthing of Charles I (AD 1625-1649), Type 2, initial mark unclear, dating to circa AD 1625-1649 (N 2291). Tower of London mint. Ref: North 1991: 165. 
Created on: Monday 25th March 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D7D101
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of the House of Constantine (AD 306-364) dating to AD 330-335 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers holding two standards. Unclear mint. 
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D6E50E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Distorted fragment of a large medieval copper alloy buckle frame, a straight outside edge of almost flat cross-section with a small part of both sides. On the gently convex front face there is a pin groove and, near both junctions with the sides beyond which the edge projects very slightly, there is a pair of narrow grooves, It is uncertain whether the buckle was single-looped (cf. NMS-3CAD39) or double-looped (cf. NMS-886894). Weight 5.81g. Width and thickness of edge 39mm and 2 - 2.4mm. Extant length 18mm, of which the edge accounts for 9.5mm. Mid 14th - mid 15th century.
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D650C6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Heavily eroded medieval copper-alloy pin from a buckle or brooch. It is plano-convex in cross section and appears to be mostly complete, except for extensive surface loss and pitting. The loop is either bent open (currently curving around 180 degrees) or is incomplete: probably the former, since its terminal tapers to a fine point (in thickness) and does not appear to be broken. The shaft tapers in width uniformly from the base of the loop to a point at the opposite end. There is no trace of a collar. 13th to 14th century. Length: 49.5mm. Width: 6.1mm. Thickness (at base of shaft): 4.…
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D60F63
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A complete Medieval copper-alloy strap end dating circa AD 1200-1400. A one piece strap end, it is broadly trapezoidal in plan tapering from its widest extent at the attachment end into the terminal. Projecting from the terminal edge is a triangular knop. The plate has a split end and is undecorated on either face. Two rivet holes positioned centrally at the terminal and attachment end, remain in sity. Similar examples are depicted in Egan and Pritchard 2002: pg 144.  Length: 28.5mm; Width: 9mm; Thickness: 3.8mm; Weight: 3.05g.
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D5B0BB
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Early Medieval copper-alloy ansate brooch dating to circa AD 700-1000. Cast in one piece it consists of two flat discoidal terminals at either end. One terminal appears to have been slightly miscast with a circular protrusion projecting from one edge. The bow has a triangular-section and is curved in profile. The terminals and bow are undecorated. Projecting from the reverse of one of the terminals is a heavily corroded lug which would have held the now missing pin. There is now no trace of a catchplate projecting from the reverse of the other terminal. The brooch is con…
Created on: Friday 22nd March 2024
Last updated: Friday 22nd March 2024
Spatial data recorded.

Record ID: NMS-C67C49
Object type: BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Incomplete Hod Hill brooch, missing hinged pin mechanism and catch-plate, the latter remains as a linier stump on the reverse, the bow has been partially flattened, probably from agricultural machinery passing over the top of the soil. The metal is now a bright green with light brown patination to the lower parts of the decoration, the upper end of the brooch is bifurcated with a slot for the pin, now incomplete, the bow has a medial ridge/moulding with both lateral edges/wings broken in antiquity, the bow is truncated at the lower end of the bow by a double transverse moulding wi…
Created on: Thursday 21st March 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

Record ID: NMS-C61971
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete cast copper alloy stirrup strap mount with zoomorphic design of later Early Medieval (Late Saxon), 11th century date, of sub-trapezoidal shape, the upper and (the usually angled) lower edges now missing including a break through one openwork perforation at the lower edge, the upper edge is also truncated through an perforation. The main decoration is roughly incised (either in the model/mould or finished casting) to form a forward-facing beast mask, two eyes, rabbit-like ears and a triangular snout are quite clear, though the piece has lost much of its original surface as…
Created on: Thursday 21st March 2024
Last updated: Thursday 4th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-C60265
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of Constantine I (AD 306-337) dating to AD 313-317 (Reece Period 15). GENIO POP ROM reverse type depicting Genius standing left holding cornucopiae and patera. Unclear mint. 
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-C33869
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval buckle dating to circa AD 1200-1400. The extant element consists of  the plate. The plate is rectangular, comprised of a single sheet of copper alloy folded and joined together by two separetely made rivets, only one of which now survives. At the frame end is a rectangular voided which the axis bar of the frame would have slotted through. Much of the plate on the reverse has now broken away. At the attachment end of the surviving plate are two opposed circular rivet holes. The front face of the plate is decorated with incised cross hatching.  A similar…
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-C301C6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval buckle dating to circa AD 1200-1400. The extant element consists of a the plate. The frame is missing. Part of the axis bar, however, remains. It is circular-sectioned and positioned btween two folded elements. The plate would have comprised a single sheet of copper alloy folded and joined together by externally made rivets. However, much of the reverse plate has now broken away. The front face of the buckle has four circular rivet holes arranged in a 2-2 formation. One copper alloy rivet survives intact. It is circular-sectioned with a mushroom shaped head. The …
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-C2139C
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
An incomplete Medieval copper-alloy strap end dating to circa AD 1200-1400. Part of a composite strap end, the piece comprised of one plate. It is rectangular in plan with a shield shaped terminal from which projects an incomplete trefoil or triangular knop. Now heavily abraded and scarred, an intact separately made copper alloy rivet is positioned centrally towards the attachment end.  Similar examples are recorded in Egan and Pritchard 2002: 125-161. Length: 39.8mm; Width: 14.6mm; Thickness: 2.7mm; Weight: 8.61g.
Created on: Thursday 21st March 2024
Last updated: Thursday 21st March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-AE57E5
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy jetton, Lion of St. Mark type of Nuremberg, further details illegible, c.1500-70
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-AE4B85
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy jetton, anonymous rose-orb type of Nuremberg with garbled legends, pierced, c.1550-84
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-AE3B1A
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy radiate of Tetricus I, Mint II, reverse female standing left, AD271-4
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-AE262C
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy nummus of Constantius Chlorus as Caesar, Rome, obverse CONSTANTIVS NOB CAES, laureate head right, reverse GENIO POPVLI ROMANI type, mintmark R/S//[...], RIC VI, 73a, AD297-8
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-AE00D6
Object type: COIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy sestertius, very corroded and utterly illegible, probably Antonine, c.AD138-92
Created on: Wednesday 20th March 2024
Last updated: Wednesday 20th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-9C2DE7
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A complete Post Medieval hooked tag (dress fastener) dating to circa AD 1550-150. It consists of a sub-oval plate carrying moulded floriate decoration.  At the apex is a rectangular suspension loop. Emerging from the lower edge is a reverted hook. The piece is plano-convex in section. It is consistent with Read's Class E, Type 3 group with a very similar example illustrated in 2008: pg 103, no 400.  Length 36.1mm; Width 20.4mm, Thickness 2.2mm, Weight 4.09g.
Created on: Tuesday 19th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-9C07B6
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Norfolk
Workflow stage: Awaiting validation
A fragment of a Late Bronze Age socketed axe dating to circa 1000-800 BC. The extant portion consists of a small part of the socket mouth. It has a double moulded rim and is curved in profile. It terminates in worn breaks along along the body.  It has a dark green patina. Length: 30.1mm; Width: 21.5mm; Thickness: 5.4mm; Weight: 10.78g.
Created on: Tuesday 19th March 2024
Last updated: Tuesday 19th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-9BEFAE
Object type: JETTON
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Medieval copper alloy Fench jetto, shield of France type, of Charles VI dating to AD (AD 1380-1442). Obverse: shield of France modern bearing three fleurs de lis, star above and at each side: AVE MARIA GRACIA PLENA . Reverse: triple stranded cross fleuretty in four arched tressure around a rossette, a flower at each internal angle, an A at three external angles. Cf. Mitchiner (1988), pp175-178, no.s 440-459 etc
Created on: Tuesday 19th March 2024
Last updated: Tuesday 19th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-9BBBBA
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A post Medieval copper alloy Nuremberg Rose and Orb type Jetton of Hans Krauwinckel II (1586-1635). The reverse motto reads [*HEIT ROTT] MORGEN DOTT ("Red today, dead tomorrow"). Cf. Mitchiner (1988) p.445 no. 1574.
Created on: Tuesday 19th March 2024
Last updated: Tuesday 19th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-9B89A7
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Post Medieval copper-alloy Nuremberg jetton, rose-orb type of uncertain maker, dating to circa AD 1500-1651. 
Created on: Tuesday 19th March 2024
Last updated: Tuesday 19th March 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-99BF1D
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A Post Medieval copper-alloy Nuremberg jetton, rose-orb type of uncertain maker, dating to circa AD 1500-1651. 
Created on: Tuesday 19th March 2024
Last updated: Tuesday 19th March 2024
Spatial data recorded.