Record ID: IOW-DA399B
Object type: ADZE
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Copper alloy fragment of possible adze tool, possibly late medieval. The reverse face is flat and undecorated; the obverse face has a low ridge running down the centre of the fragment toward a blunt, curved end. Such a ridge would give extra strength to a flat tool that is otherwise made of a weak metal alloy.
Created on: Tuesday 11th January 2022
Last updated: Monday 31st January 2022
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: LANCUM-A0F715
Object type: ADZE
Broad period: BRONZE AGE
County: Cumbria
Workflow stage: Awaiting validation
A complete, cast, copper-alloy chisel-like palstave adze of Middle Bronze Age date, c. 1500BC - 1150BC; likely of Acton Park II - Taunton phase of the Middle Bronze Age and probably dating to 1500BC - 1300BC. The adze is rectangular in form and cross-section with a narrow curved blade. The butt end is rectangular in form and triangular in cross-section. It has flanged sides on both the top and bottom faces that project vertically, creating a U-shaped channel that would have terminated at a stop ridge; the stop ridge is no longer present. The sides on the blade end have…
Created on: Friday 3rd December 2021
Last updated: Friday 28th January 2022
Spatial data recorded. This findspot is known as 'Near Sebergham', grid reference and parish protected.

Record ID: GLO-36A377
Object type: ADZE
Broad period: BRONZE AGE
Workflow stage: Awaiting validation
A copper alloy palstave adze that is rectangular in form and cross-section with a narrow curved blade. The rear half has flanged sides on both the top and bottom faces that project vertically creating a U-shaped channel that terminate at the stop ridge that is position in the middle of the item. A small triangular indentation sits in front to the stop ridge. The sides on the front half have a shallow concave arc that expands out to either tip of the blade. The forward edge of the blade has a short bevel (2mm long) on both sides, although one side is steeper than the other and may…
Created on: Tuesday 2nd April 2019
Last updated: Monday 15th July 2019
No spatial data available.

Record ID: LANCUM-697908
Object type: ADZE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Published
Bronze age copper alloy palstave adze 1500 - 1150BC. The length is 125mm, the width of blade is 28mm thickness 20mm and the weight 138.02g. The object is rectangular in form and cross section and is intact, with slight damage to its butt end and some of its surface. The butt end is rectangular in form and triangular in cross section, with each face having a rectangular shaped recess with a raised border to contain the handle. The blade, which has an elongated triangular cross section, tapers in width from the point it joins the butt. Overall it is 20mm wide and rectangular in form,…
Created on: Tuesday 5th June 2018
Last updated: Wednesday 4th July 2018
Spatial data recorded.

Record ID: LEIC-916183
Object type: ADZE
Broad period: BRONZE AGE
County: Leicestershire
Workflow stage: Awaiting validation
Bronze age copper alloy palstave adze, 140mm long, 23mm wide and 17mm thick with a weight of 159grams. The object is rectangular in form and cross section and is intact, with slight damage to its butt end and some of its surface. The butt end is rectangular in form and triangular in cross section, with each face having a rectangular shaped recess with a raised border to contain the handle. The blade, which has an elongated triangular cross section, tapers in width from the point it joins the butt. Overall it is 20mm wide and rectangular in form, then flares out to form a curved cut…
Created on: Wednesday 15th March 2017
Last updated: Monday 20th March 2017
Spatial data recorded.

Record ID: NMGW-DABBEA
Object type: ADZE
Broad period: BRONZE AGE
County: Rhondda Cynon Taf
Workflow stage: Published
Middle Bronze Age bronze tool, probably an adze of Acton Park 2 or Taunton Metalworking Industries of Needham's (1996) Period 5 and probably dating to c. 1500 - 1300BC. The axe is near-complete with peripheral damage but is heavily corroded and with a fragmentary butt (with a length of 164mm and a weight of 157.8g). The fractured butt has a rounded point and is thin (6mm wide and 2mm thick) but has suffered some erosion. The sides are moderately straight and divergent to the side protrusions or trunnions (giving the tool a width of 30.5mm). The corroded trunnions are rounded and of…
Created on: Tuesday 31st May 2016
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: LANCUM-64B7A7
Object type: ADZE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Published
A cast copper alloy palstave adze dating from the Middle Bronze Age, that is c. 1500-1150BC. The body of the adze is long and slender and shaped like a palstave with its cutting edge twisted at 90 degrees. It is complete and in good condition with only some patches of active corrosion. The blade and butt end are intact and most of the original dark olive green patina survives. A similar example has been recorded from Warwickshire (WAW-F2B395) and Brokenborough, Wiltshire (WILT-DBCAF4) and on this example Brendan O'Connor commented: "This is a type known to John Evans (Ancient Bronz…
Created on: Monday 28th July 2014
Last updated: Wednesday 4th July 2018
Spatial data recorded. This findspot is known as 'GISBURN', grid reference and parish protected.

Record ID: DUR-032171
Object type: ADZE
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy adze dating from the Roman period to the post medieval period. The object is sub-rectangular in plan with a square perforation. The object tapers to a point after the perforation. The object is thickest around the hole taper to a blade at the wider end. There is a slight bulge in plan around the hole. Part of a similar object has been recorded on the PAS database, KENT-32EBB3.
Created on: Wednesday 11th September 2013
Last updated: Wednesday 11th September 2013
Spatial data recorded.

Record ID: LANCUM-5CE338
Object type: ADZE
Broad period: BRONZE AGE
County: Cumbria
Workflow stage: Published
A cast copper alloy palstave adze dating from the Middle Bronze Age, that is c. 1500-1150BC. The body of the adze is long and slender and shaped like a palstave with its cutting edge twisted at 90 degrees. It is complete and in good condition with only some patches of active corrosion. The blade and butt end are intact and most of the original dark olive green patina survives. A very similar example has been recorded from Warwickshire (WAW-F2B395) and Brokenborough, Wiltshire (WILT-DBCAF4) and on this example Brendan O'Connor commented: "This is a type known to John Evans (Ancient …
Created on: Tuesday 4th September 2012
Last updated: Wednesday 15th October 2014
Spatial data recorded. This findspot is known as 'Crosby Ravensworth', grid reference and parish protected.

Record ID: LEIC-58C955
Object type: ADZE
Broad period: BRONZE AGE
County: Leicestershire
Workflow stage: Awaiting validation
Middle Bronze age copper alloy Palstave Adze, 121mm long, 22mm wide and 14mm thick. The object is in fair condition and weighs 88grams. The object is rectangular in form and triangular in cross section, with a slightly curved blade. Its butt end is triangular shaped in cross section and houses two rectangular recessess either side of a central panel with a raised border to contain a handle. The object is slightly damaged around its edges and has small patches of original surface remaining. The object is similar to WAW-FLB395
Created on: Tuesday 17th January 2012
Last updated: Monday 20th March 2017
Spatial data recorded.

Record ID: KENT-32EBB3
Object type: ADZE
Broad period: UNKNOWN
County: Kent
Workflow stage: Awaiting validation
An incomplete cast copper alloy adze of uncertain date. It is subrectangular in section and in plan and tapered in profile. The end tapers towards a bevelled edge and curves slightly downwards. There is a large oval perforation in the centre . From the perforation, the sides expand towards working edge. There is an old break, which runs at a 45 degree angle from the side of the adze near the upper part of the perforation towards the working edge. It is in fair condition, with a light green patina. It measures 59.22 mm L x 23.58 mm W x 7.75 mm TH x 15.98 mm DIA (of perforation) a…
Created on: Wednesday 28th September 2011
Last updated: Wednesday 5th October 2011
Spatial data recorded.

Record ID: WAW-F2B395
Object type: ADZE
Broad period: BRONZE AGE
County: Warwickshire
Workflow stage: Awaiting validation
A cast copper alloy Middle Bronze Age Palstave Adze. The cutting edge is on the vertical and is heavily abraded and corroded. In plan it is a slender elongated triangle which is slightly swollen along the centre of the lateral edges. The butt is also heavily abraded and corroded. The butt portion has a rectangular cell with an open end at the butt on the upper and lower face, thereby forming a 'H' shaped section. In profile the adze is a sub asymmetrical lozenge, with the butt tapering to a blunt point, and the blade portion of the adze having slightly concave sides and expanding in w…
Created on: Friday 8th April 2011
Last updated: Friday 8th April 2011
Spatial data recorded.

Record ID: KENT-A74F63
Object type: ADZE
Broad period: BRONZE AGE
County: Kent
Workflow stage: Awaiting validation
Cast copper alloy adze, of middle to late Bronze Age date.
Created on: Friday 28th January 2005
Last updated: Thursday 24th February 2011
No spatial data available.