Record ID: NLM-72D300
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy and iron buckle. A small cast rectangular frame retaining a steel spindle held in opposed housings. Suggested date: Post-Medieval, 1720-1790 Length: 16.7mm, Height: 19.9mm, Thickness (at housings): 3.5mm, Weight: 2.08gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: YORYM-72C692
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
An incomplete copper-alloy penannular brooch of Roman date, c. AD 50 - 200. Booth Type A3 (Fowler Type A2). The brooch comprises a plain, circular sectioned frame with expanded knop terminals. Both terminals are flattened knops with grooved decoration. A humped pin remains fitted around the frame by a coiled loop. The pin is a flat rectangular sheet where it loops around the frame and tapers to a circular section before flattening out again at the tip. The metal has a mid-green patina and is in fair condition. The pin is 35.7mm long, 3.1mm wide, 2.1mm thick. The frame is 2…
Created on: Tuesday 5th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: YORYM-72B0E6
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy strap end dating to the late early-medieval period, c. AD 1000-1100. The object consists of a flat sub-trapezoidal plate with a projecting shaft, terminating with a split end joined by a small pin. The edges of the plate are worn with breaks marking areas which are now lost. The shaft is thicker and decorated with unclear ridges which extend diagonally down the sides of the shaft. Much of the shaft is split into two flat plates. These are joined near the terminal of the object by a thin pin with the ends of this pin visible on the exterior edg…
Created on: Tuesday 5th March 2024
Last updated: Thursday 11th April 2024
Spatial data recorded.

Record ID: NLM-72AEBB
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast single looped buckle frame with a flat rectangular expanded ribbed outer edge and with a narrowed and offset strap bar; flat-backed. Suggested date: Medieval, 1250-1400 Length: 17.3mm, Height: 16.1mm, Thickness: 1.5mm, Weight: 1.33gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-729632
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast single looped or D-shaped single looped buckle with an expanded outer edge and with a narrowed and offset strap bar; flat-backed. A rectangular section pin remains looped round the strap bar. Suggested date: Medieval, 1250-1500 Length: 16.5mm, Height: 16.9mm, Thickness (frame): 2.3mm, Weight: 2.19gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-727C70
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. A small cast single looped buckle with an expanded outer edge flanked by rounded knops and with a narrowed and offset strap bar with a knop at either end; flat-backed. A sheet metal pin remains looped round the strap bar; gilding traces on the display side. Suggested date: Medieval, 1250-1400 Length: 12.8mm, Height: 16.1mm, Thickness (frame): 2.2mm, Weight: 1.49gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-724169
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. A small cast trapezoid frame with a bevelled outer edge, retaining a drawn wire pin wrapped around the strap bar. Suggested date: Medieval, 1300-1500 Length: 15.8mm, Height: 14.2mm, Thickness (frame): 3.7mm, Weight: 2.04gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-7221D8
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy and iron buckle. Cast plain rectangular frame of rounded section with a ferrous metal accretion representing an iron pin. Suggested date: Medieval, 1300-1500 Length: 17.6mm, Height: 18.8mm, Thickness (frame): 2.6mm, Weight: 2.57gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: YORYM-7221D3
Object type: COIN
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A complete possible copy of a gold Iron Age stater of British uninscribed North Eastern (Corieltavi) South Ferriby type dating to the period 50 - 20 BC. Lunate horse left, "anchor face" above, star/sun below, pellet rosette below head reverse. ABC, p.92, no.1743. The patina of this coin is unusual and the metal content is uncertain.
Created on: Tuesday 5th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.

Record ID: NLM-71FBC4
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle fragment. The inner edge of a cast single looped buckle frame with a narrowed and offset strap bar retained by a folded slotted rectangular sheet metal plate of thickness 0.4mm secured at its inner end by a domed rivet of head diameter 4mm and length 4mm, burred behind. A tapered rectangular section pin is wrapped round the strap bar and protrudes from the plate. Suggested date: Medieval, 1250-1400 Length: 38.9mm, Height: 20.3mm, Thickness (frame): 2.6mm, Weight: 4.22gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-71DBDA
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. A small cast trapezoid frame with a bevelled outer edge and a narrowed strap bar; a drawn wire pin remains looped round the strap bar. Suggested date: Late Medieval, 1350-1500 Length: 13.6mm, Height: 13.3mm, Thickness (frame): 2mm, Weight: 0.92gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-71C14D
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy strap end fragment. The inner end of a tongue-shaped openwork strap end, Thomas Class E Type ?2, with addorsed kidney-shaped holes with a single attachment hole between them, and with a horizontal bar separating this field of decoration from its neighbour. Suggested date: 850-1000 Length: 28.8mm, Width: 22.3mm, Thickness: 2.6mm, Weight: 5.52gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-71A649
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle fragment. A single looped buckle with the stub of a tapered integrally cast plate; a flat pin is looped through a hole behind the frame; possibly a spur buckle; fiercely abraded. Suggested date: Medieval, 1250-1400 Length: 18.3mm, Height: 16.1mm, Thickness (frame): 1.8mm, Weight: 1.27gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-718DBA
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast single looped or D-shaped frame with an expanded outer edge with four grooves and with a narrowed strap bar; flat-backed. Suggested date: Medieval, 1250-1500 Length: 15.6mm, Height: 16.5mm, Thickness: 2.6mm, Weight: 1.28gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-71730C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy and iron buckle. Cast sub-rectangular frame with curved ends and retaining a separate chape fragment on a separate steel spindle; a slight curvature in profile suggests a function as a knee buckle. Abraded. Suggested date: Post-Medieval, 1660-1720 Length: 22.5mm, Height: 18.7mm, Thickness: 3.3mm, Weight: 3.48gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-715A4B
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle. Cast single looped D-shaped frame with an expanded outer edge   with grooves defining a pin rest, and with a narrowed strap bar; flat-backed. Spots of rust suggest the buckle was deposited with an iron pin attached, now lost. Suggested date: Medieval, 1250-1500 Length: 14.5mm, Height: 16.0mm, Thickness: 2.1mm, Weight: 1.02gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-713E21
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle plate. A rectangular sheet metal plate of thickness 0.7mm, slotted and folded and narrower behind, formerly attached by five dome headed rivets [three lost] of head diameter 3.1mm and length 3.8mm to the strap [lost]; gilding traces appear on the display side. Abraded. Suggested date: Medieval, 1250-1400 Length: 34.5mm, Height: 15.2mm, Thickness: 0.7mm, Weight: 3.66gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-7122F5
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy and iron buckle. Cast D-shaped buckle with an expanded and thickened outer edge, with a mass of ferrous corrosion from the decay of its iron pin. Suggested date: Early Medieval, 1000-1100 Length: 16.9mm, Height: 16.7mm, Thickness (frame): 3.7mm, Weight: 4.08gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: NLM-710903
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Copper alloy buckle fragment. One end from the cast frame of a double looped buckle with  a trefoil spur on its outer edge and a central strap bar [lost] flanked at its ends by spurs. Flat-backed. Suggested date: Post-Medieval, 1550-1650 Length: 18.8mm, Height: 28.3mm, Thickness: 2.1mm, Weight: 2.66gms
Created on: Tuesday 5th March 2024
Last updated: Tuesday 5th March 2024
Spatial data recorded. This findspot is known as 'near Pocklington', grid reference and parish protected.

Record ID: YORYM-70A484
Object type: STUD
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
An incomplete, copper-alloy bell shaped stud, probably a furniture fitting, of Roman date, c.AD 43 - 410. Allason-Jones type 1.  The object comprises a circular disc with a concave upper surface featuring an central integral projecting truncated cone. The reverse of the disc is convex with an integral neck from which a short circular iron shank extends. The shank is broken and worn. The metal has a dark green patina and is worn. The object is 34.4mm in diameter, 20.4mm thick and weighs 27.1g. Bell Shaped Studs are a multi-purpose form of artefact, commonly found …
Created on: Tuesday 5th March 2024
Last updated: Thursday 14th March 2024
Spatial data recorded.